| Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 1 | # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
| 2 | %YAML 1.2 |
| 3 | --- |
| 4 | $id: http://devicetree.org/schemas/media/i2c/isil,isl79987.yaml# |
| 5 | $schema: http://devicetree.org/meta-schemas/core.yaml# |
| 6 | |
| 7 | title: Intersil ISL79987 Analog to MIPI CSI-2 decoder |
| 8 | |
| 9 | maintainers: |
| 10 | - Michael Tretter <m.tretter@pengutronix.de> |
| 11 | - Marek Vasut <marex@denx.de> |
| 12 | |
| 13 | description: |
| 14 | The Intersil ISL79987 is an analog to MIPI CSI-2 decoder which is capable of |
| 15 | receiving up to four analog stream and multiplexing them into up to four MIPI |
| 16 | CSI-2 virtual channels, using one MIPI clock lane and 1/2 data lanes. |
| 17 | |
| 18 | properties: |
| 19 | compatible: |
| 20 | enum: |
| 21 | - isil,isl79987 |
| 22 | |
| 23 | reg: |
| 24 | maxItems: 1 |
| 25 | |
| 26 | reset-gpios: |
| 27 | maxItems: 1 |
| 28 | description: |
| 29 | A GPIO spec for the RSTB pin (active high) |
| 30 | |
| 31 | powerdown-gpios: |
| 32 | maxItems: 1 |
| 33 | description: |
| 34 | A GPIO spec for the Power Down pin (active high) |
| 35 | |
| 36 | ports: |
| 37 | $ref: /schemas/graph.yaml#/properties/ports |
| 38 | properties: |
| 39 | port@0: |
| 40 | $ref: /schemas/graph.yaml#/$defs/port-base |
| 41 | unevaluatedProperties: false |
| 42 | description: Output port |
| 43 | |
| 44 | properties: |
| 45 | endpoint: |
| 46 | $ref: /schemas/media/video-interfaces.yaml# |
| 47 | unevaluatedProperties: false |
| 48 | |
| 49 | properties: |
| 50 | data-lanes: |
| 51 | minItems: 1 |
| 52 | maxItems: 2 |
| 53 | |
| 54 | required: |
| 55 | - data-lanes |
| 56 | |
| 57 | patternProperties: |
| 58 | "^port@[1-4]$": |
| 59 | $ref: /schemas/graph.yaml#/properties/port |
| 60 | description: Input ports |
| 61 | |
| 62 | required: |
| 63 | - port@0 |
| 64 | |
| 65 | additionalProperties: false |
| 66 | |
| 67 | required: |
| 68 | - compatible |
| 69 | - reg |
| 70 | - ports |
| 71 | |
| 72 | examples: |
| 73 | - | |
| 74 | #include <dt-bindings/gpio/gpio.h> |
| 75 | |
| 76 | i2c { |
| 77 | #address-cells = <1>; |
| 78 | #size-cells = <0>; |
| 79 | |
| 80 | isl7998x_mipi@44 { |
| 81 | compatible = "isil,isl79987"; |
| 82 | reg = <0x44>; |
| 83 | powerdown-gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>; |
| 84 | reset-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>; |
| 85 | |
| 86 | ports { |
| 87 | #address-cells = <1>; |
| 88 | #size-cells = <0>; |
| 89 | |
| 90 | port@0 { |
| 91 | reg = <0>; |
| 92 | isl79987_out: endpoint { |
| 93 | remote-endpoint = <&mipi_csi2_in>; |
| 94 | data-lanes = <1 2>; |
| 95 | }; |
| 96 | }; |
| 97 | |
| 98 | port@1 { |
| 99 | reg = <1>; |
| 100 | endpoint { |
| 101 | remote-endpoint = <&camera_0>; |
| 102 | }; |
| 103 | }; |
| 104 | |
| 105 | port@2 { |
| 106 | reg = <2>; |
| 107 | endpoint { |
| 108 | remote-endpoint = <&camera_1>; |
| 109 | }; |
| 110 | }; |
| 111 | }; |
| 112 | }; |
| 113 | }; |