Stefan Roese | f994768 | 2018-10-26 14:53:27 +0200 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0+ |
| 2 | /* |
| 3 | * MediaTek ethernet IP driver for U-Boot |
| 4 | * |
| 5 | * Copyright (C) 2018 Stefan Roese <sr@denx.de> |
| 6 | * |
| 7 | * This code is mostly based on the code extracted from this MediaTek |
| 8 | * github repository: |
| 9 | * |
| 10 | * https://github.com/MediaTek-Labs/linkit-smart-uboot.git |
| 11 | * |
| 12 | * I was not able to find a specific license or other developers |
| 13 | * copyrights here, so I can't add them here. |
| 14 | */ |
| 15 | |
| 16 | #include <common.h> |
Simon Glass | 6333448 | 2019-11-14 12:57:39 -0700 | [diff] [blame] | 17 | #include <cpu_func.h> |
Stefan Roese | f994768 | 2018-10-26 14:53:27 +0200 | [diff] [blame] | 18 | #include <dm.h> |
Simon Glass | 0f2af88 | 2020-05-10 11:40:05 -0600 | [diff] [blame] | 19 | #include <log.h> |
Stefan Roese | f994768 | 2018-10-26 14:53:27 +0200 | [diff] [blame] | 20 | #include <malloc.h> |
| 21 | #include <miiphy.h> |
| 22 | #include <net.h> |
developer | e4387bd | 2019-09-25 17:45:32 +0800 | [diff] [blame] | 23 | #include <reset.h> |
Stefan Roese | f994768 | 2018-10-26 14:53:27 +0200 | [diff] [blame] | 24 | #include <wait_bit.h> |
Simon Glass | 274e0b0 | 2020-05-10 11:39:56 -0600 | [diff] [blame] | 25 | #include <asm/cache.h> |
Stefan Roese | f994768 | 2018-10-26 14:53:27 +0200 | [diff] [blame] | 26 | #include <asm/io.h> |
| 27 | #include <linux/bitfield.h> |
Simon Glass | 4dcacfc | 2020-05-10 11:40:13 -0600 | [diff] [blame] | 28 | #include <linux/bitops.h> |
Simon Glass | dbd7954 | 2020-05-10 11:40:11 -0600 | [diff] [blame] | 29 | #include <linux/delay.h> |
Stefan Roese | f994768 | 2018-10-26 14:53:27 +0200 | [diff] [blame] | 30 | #include <linux/err.h> |
| 31 | |
Stefan Roese | f994768 | 2018-10-26 14:53:27 +0200 | [diff] [blame] | 32 | /* Ethernet frame engine register */ |
| 33 | #define PDMA_RELATED 0x0800 |
| 34 | |
| 35 | #define TX_BASE_PTR0 (PDMA_RELATED + 0x000) |
| 36 | #define TX_MAX_CNT0 (PDMA_RELATED + 0x004) |
| 37 | #define TX_CTX_IDX0 (PDMA_RELATED + 0x008) |
| 38 | #define TX_DTX_IDX0 (PDMA_RELATED + 0x00c) |
| 39 | |
| 40 | #define RX_BASE_PTR0 (PDMA_RELATED + 0x100) |
| 41 | #define RX_MAX_CNT0 (PDMA_RELATED + 0x104) |
| 42 | #define RX_CALC_IDX0 (PDMA_RELATED + 0x108) |
| 43 | |
| 44 | #define PDMA_GLO_CFG (PDMA_RELATED + 0x204) |
| 45 | #define PDMA_RST_IDX (PDMA_RELATED + 0x208) |
| 46 | #define DLY_INT_CFG (PDMA_RELATED + 0x20c) |
| 47 | |
| 48 | #define SDM_RELATED 0x0c00 |
| 49 | |
| 50 | #define SDM_MAC_ADRL (SDM_RELATED + 0x0c) /* MAC address LSB */ |
| 51 | #define SDM_MAC_ADRH (SDM_RELATED + 0x10) /* MAC Address MSB */ |
| 52 | |
| 53 | #define RST_DTX_IDX0 BIT(0) |
| 54 | #define RST_DRX_IDX0 BIT(16) |
| 55 | |
| 56 | #define TX_DMA_EN BIT(0) |
| 57 | #define TX_DMA_BUSY BIT(1) |
| 58 | #define RX_DMA_EN BIT(2) |
| 59 | #define RX_DMA_BUSY BIT(3) |
| 60 | #define TX_WB_DDONE BIT(6) |
| 61 | |
| 62 | /* Ethernet switch register */ |
| 63 | #define MT7628_SWITCH_FCT0 0x0008 |
| 64 | #define MT7628_SWITCH_PFC1 0x0014 |
developer | 33272b6 | 2019-09-25 17:45:35 +0800 | [diff] [blame] | 65 | #define MT7628_SWITCH_PVIDC0 0x0040 |
| 66 | #define MT7628_SWITCH_PVIDC1 0x0044 |
| 67 | #define MT7628_SWITCH_PVIDC2 0x0048 |
| 68 | #define MT7628_SWITCH_PVIDC3 0x004c |
| 69 | #define MT7628_SWITCH_VMSC0 0x0070 |
Stefan Roese | f994768 | 2018-10-26 14:53:27 +0200 | [diff] [blame] | 70 | #define MT7628_SWITCH_FPA 0x0084 |
| 71 | #define MT7628_SWITCH_SOCPC 0x008c |
| 72 | #define MT7628_SWITCH_POC0 0x0090 |
| 73 | #define MT7628_SWITCH_POC2 0x0098 |
| 74 | #define MT7628_SWITCH_SGC 0x009c |
| 75 | #define MT7628_SWITCH_PCR0 0x00c0 |
| 76 | #define PCR0_PHY_ADDR GENMASK(4, 0) |
| 77 | #define PCR0_PHY_REG GENMASK(12, 8) |
| 78 | #define PCR0_WT_PHY_CMD BIT(13) |
| 79 | #define PCR0_RD_PHY_CMD BIT(14) |
| 80 | #define PCR0_WT_DATA GENMASK(31, 16) |
| 81 | |
| 82 | #define MT7628_SWITCH_PCR1 0x00c4 |
| 83 | #define PCR1_WT_DONE BIT(0) |
| 84 | #define PCR1_RD_RDY BIT(1) |
| 85 | #define PCR1_RD_DATA GENMASK(31, 16) |
| 86 | |
| 87 | #define MT7628_SWITCH_FPA1 0x00c8 |
| 88 | #define MT7628_SWITCH_FCT2 0x00cc |
| 89 | #define MT7628_SWITCH_SGC2 0x00e4 |
| 90 | #define MT7628_SWITCH_BMU_CTRL 0x0110 |
| 91 | |
| 92 | /* rxd2 */ |
| 93 | #define RX_DMA_DONE BIT(31) |
| 94 | #define RX_DMA_LSO BIT(30) |
| 95 | #define RX_DMA_PLEN0 GENMASK(29, 16) |
| 96 | #define RX_DMA_TAG BIT(15) |
| 97 | |
| 98 | struct fe_rx_dma { |
| 99 | unsigned int rxd1; |
| 100 | unsigned int rxd2; |
| 101 | unsigned int rxd3; |
| 102 | unsigned int rxd4; |
| 103 | } __packed __aligned(4); |
| 104 | |
| 105 | #define TX_DMA_PLEN0 GENMASK(29, 16) |
| 106 | #define TX_DMA_LS1 BIT(14) |
| 107 | #define TX_DMA_LS0 BIT(30) |
| 108 | #define TX_DMA_DONE BIT(31) |
| 109 | |
| 110 | #define TX_DMA_INS_VLAN_MT7621 BIT(16) |
| 111 | #define TX_DMA_INS_VLAN BIT(7) |
| 112 | #define TX_DMA_INS_PPPOE BIT(12) |
| 113 | #define TX_DMA_PN GENMASK(26, 24) |
| 114 | |
| 115 | struct fe_tx_dma { |
| 116 | unsigned int txd1; |
| 117 | unsigned int txd2; |
| 118 | unsigned int txd3; |
| 119 | unsigned int txd4; |
| 120 | } __packed __aligned(4); |
| 121 | |
| 122 | #define NUM_RX_DESC 256 |
| 123 | #define NUM_TX_DESC 4 |
developer | a564411 | 2019-09-25 17:45:33 +0800 | [diff] [blame] | 124 | #define NUM_PHYS 5 |
Stefan Roese | f994768 | 2018-10-26 14:53:27 +0200 | [diff] [blame] | 125 | |
| 126 | #define PADDING_LENGTH 60 |
| 127 | |
| 128 | #define MTK_QDMA_PAGE_SIZE 2048 |
| 129 | |
| 130 | #define CONFIG_MDIO_TIMEOUT 100 |
| 131 | #define CONFIG_DMA_STOP_TIMEOUT 100 |
| 132 | #define CONFIG_TX_DMA_TIMEOUT 100 |
| 133 | |
Stefan Roese | f994768 | 2018-10-26 14:53:27 +0200 | [diff] [blame] | 134 | struct mt7628_eth_dev { |
| 135 | void __iomem *base; /* frame engine base address */ |
| 136 | void __iomem *eth_sw_base; /* switch base address */ |
Stefan Roese | f994768 | 2018-10-26 14:53:27 +0200 | [diff] [blame] | 137 | |
| 138 | struct mii_dev *bus; |
| 139 | |
| 140 | struct fe_tx_dma *tx_ring; |
| 141 | struct fe_rx_dma *rx_ring; |
| 142 | |
| 143 | u8 *rx_buf[NUM_RX_DESC]; |
| 144 | |
| 145 | /* Point to the next RXD DMA wants to use in RXD Ring0 */ |
| 146 | int rx_dma_idx; |
| 147 | /* Point to the next TXD in TXD Ring0 CPU wants to use */ |
| 148 | int tx_dma_idx; |
developer | e4387bd | 2019-09-25 17:45:32 +0800 | [diff] [blame] | 149 | |
| 150 | struct reset_ctl rst_ephy; |
developer | a564411 | 2019-09-25 17:45:33 +0800 | [diff] [blame] | 151 | |
| 152 | struct phy_device *phy; |
developer | 33272b6 | 2019-09-25 17:45:35 +0800 | [diff] [blame] | 153 | |
| 154 | int wan_port; |
Stefan Roese | f994768 | 2018-10-26 14:53:27 +0200 | [diff] [blame] | 155 | }; |
| 156 | |
developer | ba57a6b | 2019-09-25 17:45:34 +0800 | [diff] [blame] | 157 | static int mt7628_eth_free_pkt(struct udevice *dev, uchar *packet, int length); |
| 158 | |
Stefan Roese | f994768 | 2018-10-26 14:53:27 +0200 | [diff] [blame] | 159 | static int mdio_wait_read(struct mt7628_eth_dev *priv, u32 mask, bool mask_set) |
| 160 | { |
| 161 | void __iomem *base = priv->eth_sw_base; |
| 162 | int ret; |
| 163 | |
| 164 | ret = wait_for_bit_le32(base + MT7628_SWITCH_PCR1, mask, mask_set, |
| 165 | CONFIG_MDIO_TIMEOUT, false); |
| 166 | if (ret) { |
| 167 | printf("MDIO operation timeout!\n"); |
| 168 | return -ETIMEDOUT; |
| 169 | } |
| 170 | |
| 171 | return 0; |
| 172 | } |
| 173 | |
| 174 | static int mii_mgr_read(struct mt7628_eth_dev *priv, |
| 175 | u32 phy_addr, u32 phy_register, u32 *read_data) |
| 176 | { |
| 177 | void __iomem *base = priv->eth_sw_base; |
| 178 | u32 status = 0; |
| 179 | u32 ret; |
| 180 | |
| 181 | *read_data = 0xffff; |
| 182 | /* Make sure previous read operation is complete */ |
| 183 | ret = mdio_wait_read(priv, PCR1_RD_RDY, false); |
| 184 | if (ret) |
| 185 | return ret; |
| 186 | |
| 187 | writel(PCR0_RD_PHY_CMD | |
| 188 | FIELD_PREP(PCR0_PHY_REG, phy_register) | |
| 189 | FIELD_PREP(PCR0_PHY_ADDR, phy_addr), |
| 190 | base + MT7628_SWITCH_PCR0); |
| 191 | |
| 192 | /* Make sure previous read operation is complete */ |
| 193 | ret = mdio_wait_read(priv, PCR1_RD_RDY, true); |
| 194 | if (ret) |
| 195 | return ret; |
| 196 | |
| 197 | status = readl(base + MT7628_SWITCH_PCR1); |
| 198 | *read_data = FIELD_GET(PCR1_RD_DATA, status); |
| 199 | |
| 200 | return 0; |
| 201 | } |
| 202 | |
| 203 | static int mii_mgr_write(struct mt7628_eth_dev *priv, |
| 204 | u32 phy_addr, u32 phy_register, u32 write_data) |
| 205 | { |
| 206 | void __iomem *base = priv->eth_sw_base; |
| 207 | u32 data; |
| 208 | int ret; |
| 209 | |
| 210 | /* Make sure previous write operation is complete */ |
| 211 | ret = mdio_wait_read(priv, PCR1_WT_DONE, false); |
| 212 | if (ret) |
| 213 | return ret; |
| 214 | |
| 215 | data = FIELD_PREP(PCR0_WT_DATA, write_data) | |
| 216 | FIELD_PREP(PCR0_PHY_REG, phy_register) | |
| 217 | FIELD_PREP(PCR0_PHY_ADDR, phy_addr) | |
| 218 | PCR0_WT_PHY_CMD; |
| 219 | writel(data, base + MT7628_SWITCH_PCR0); |
| 220 | |
| 221 | return mdio_wait_read(priv, PCR1_WT_DONE, true); |
| 222 | } |
| 223 | |
| 224 | static int mt7628_mdio_read(struct mii_dev *bus, int addr, int devad, int reg) |
| 225 | { |
| 226 | u32 val; |
| 227 | int ret; |
| 228 | |
| 229 | ret = mii_mgr_read(bus->priv, addr, reg, &val); |
| 230 | if (ret) |
| 231 | return ret; |
| 232 | |
| 233 | return val; |
| 234 | } |
| 235 | |
| 236 | static int mt7628_mdio_write(struct mii_dev *bus, int addr, int devad, int reg, |
| 237 | u16 value) |
| 238 | { |
| 239 | return mii_mgr_write(bus->priv, addr, reg, value); |
| 240 | } |
| 241 | |
| 242 | static void mt7628_ephy_init(struct mt7628_eth_dev *priv) |
| 243 | { |
| 244 | int i; |
| 245 | |
| 246 | mii_mgr_write(priv, 0, 31, 0x2000); /* change G2 page */ |
| 247 | mii_mgr_write(priv, 0, 26, 0x0000); |
| 248 | |
| 249 | for (i = 0; i < 5; i++) { |
| 250 | mii_mgr_write(priv, i, 31, 0x8000); /* change L0 page */ |
| 251 | mii_mgr_write(priv, i, 0, 0x3100); |
| 252 | |
| 253 | /* EEE disable */ |
| 254 | mii_mgr_write(priv, i, 30, 0xa000); |
| 255 | mii_mgr_write(priv, i, 31, 0xa000); /* change L2 page */ |
| 256 | mii_mgr_write(priv, i, 16, 0x0606); |
| 257 | mii_mgr_write(priv, i, 23, 0x0f0e); |
| 258 | mii_mgr_write(priv, i, 24, 0x1610); |
| 259 | mii_mgr_write(priv, i, 30, 0x1f15); |
| 260 | mii_mgr_write(priv, i, 28, 0x6111); |
| 261 | } |
| 262 | |
| 263 | /* 100Base AOI setting */ |
| 264 | mii_mgr_write(priv, 0, 31, 0x5000); /* change G5 page */ |
| 265 | mii_mgr_write(priv, 0, 19, 0x004a); |
| 266 | mii_mgr_write(priv, 0, 20, 0x015a); |
| 267 | mii_mgr_write(priv, 0, 21, 0x00ee); |
| 268 | mii_mgr_write(priv, 0, 22, 0x0033); |
| 269 | mii_mgr_write(priv, 0, 23, 0x020a); |
| 270 | mii_mgr_write(priv, 0, 24, 0x0000); |
| 271 | mii_mgr_write(priv, 0, 25, 0x024a); |
| 272 | mii_mgr_write(priv, 0, 26, 0x035a); |
| 273 | mii_mgr_write(priv, 0, 27, 0x02ee); |
| 274 | mii_mgr_write(priv, 0, 28, 0x0233); |
| 275 | mii_mgr_write(priv, 0, 29, 0x000a); |
| 276 | mii_mgr_write(priv, 0, 30, 0x0000); |
| 277 | |
| 278 | /* Fix EPHY idle state abnormal behavior */ |
| 279 | mii_mgr_write(priv, 0, 31, 0x4000); /* change G4 page */ |
| 280 | mii_mgr_write(priv, 0, 29, 0x000d); |
| 281 | mii_mgr_write(priv, 0, 30, 0x0500); |
| 282 | } |
| 283 | |
| 284 | static void rt305x_esw_init(struct mt7628_eth_dev *priv) |
| 285 | { |
| 286 | void __iomem *base = priv->eth_sw_base; |
developer | 33272b6 | 2019-09-25 17:45:35 +0800 | [diff] [blame] | 287 | void __iomem *reg; |
| 288 | u32 val = 0, pvid; |
| 289 | int i; |
Stefan Roese | f994768 | 2018-10-26 14:53:27 +0200 | [diff] [blame] | 290 | |
| 291 | /* |
| 292 | * FC_RLS_TH=200, FC_SET_TH=160 |
| 293 | * DROP_RLS=120, DROP_SET_TH=80 |
| 294 | */ |
| 295 | writel(0xc8a07850, base + MT7628_SWITCH_FCT0); |
| 296 | writel(0x00000000, base + MT7628_SWITCH_SGC2); |
| 297 | writel(0x00405555, base + MT7628_SWITCH_PFC1); |
| 298 | writel(0x00007f7f, base + MT7628_SWITCH_POC0); |
| 299 | writel(0x00007f7f, base + MT7628_SWITCH_POC2); /* disable VLAN */ |
| 300 | writel(0x0002500c, base + MT7628_SWITCH_FCT2); |
| 301 | /* hashing algorithm=XOR48, aging interval=300sec */ |
| 302 | writel(0x0008a301, base + MT7628_SWITCH_SGC); |
| 303 | writel(0x02404040, base + MT7628_SWITCH_SOCPC); |
| 304 | |
| 305 | /* Ext PHY Addr=0x1f */ |
| 306 | writel(0x3f502b28, base + MT7628_SWITCH_FPA1); |
| 307 | writel(0x00000000, base + MT7628_SWITCH_FPA); |
| 308 | /* 1us cycle number=125 (FE's clock=125Mhz) */ |
| 309 | writel(0x7d000000, base + MT7628_SWITCH_BMU_CTRL); |
| 310 | |
developer | 33272b6 | 2019-09-25 17:45:35 +0800 | [diff] [blame] | 311 | /* LAN/WAN partition, WAN port will be unusable in u-boot network */ |
| 312 | if (priv->wan_port >= 0 && priv->wan_port < 6) { |
| 313 | for (i = 0; i < 8; i++) { |
| 314 | pvid = i == priv->wan_port ? 2 : 1; |
| 315 | reg = base + MT7628_SWITCH_PVIDC0 + (i / 2) * 4; |
| 316 | if (i % 2 == 0) { |
| 317 | val = pvid; |
| 318 | } else { |
| 319 | val |= (pvid << 12); |
| 320 | writel(val, reg); |
| 321 | } |
| 322 | } |
| 323 | |
| 324 | val = 0xffff407f; |
| 325 | val |= 1 << (8 + priv->wan_port); |
| 326 | val &= ~(1 << priv->wan_port); |
| 327 | writel(val, base + MT7628_SWITCH_VMSC0); |
| 328 | } |
| 329 | |
Stefan Roese | f994768 | 2018-10-26 14:53:27 +0200 | [diff] [blame] | 330 | /* Reset PHY */ |
developer | e4387bd | 2019-09-25 17:45:32 +0800 | [diff] [blame] | 331 | reset_assert(&priv->rst_ephy); |
| 332 | reset_deassert(&priv->rst_ephy); |
Stefan Roese | f994768 | 2018-10-26 14:53:27 +0200 | [diff] [blame] | 333 | mdelay(10); |
| 334 | |
Stefan Roese | f994768 | 2018-10-26 14:53:27 +0200 | [diff] [blame] | 335 | mt7628_ephy_init(priv); |
| 336 | } |
| 337 | |
| 338 | static void eth_dma_start(struct mt7628_eth_dev *priv) |
| 339 | { |
| 340 | void __iomem *base = priv->base; |
| 341 | |
| 342 | setbits_le32(base + PDMA_GLO_CFG, TX_WB_DDONE | RX_DMA_EN | TX_DMA_EN); |
| 343 | } |
| 344 | |
| 345 | static void eth_dma_stop(struct mt7628_eth_dev *priv) |
| 346 | { |
| 347 | void __iomem *base = priv->base; |
| 348 | int ret; |
| 349 | |
| 350 | clrbits_le32(base + PDMA_GLO_CFG, TX_WB_DDONE | RX_DMA_EN | TX_DMA_EN); |
| 351 | |
| 352 | /* Wait for DMA to stop */ |
| 353 | ret = wait_for_bit_le32(base + PDMA_GLO_CFG, |
| 354 | RX_DMA_BUSY | TX_DMA_BUSY, false, |
| 355 | CONFIG_DMA_STOP_TIMEOUT, false); |
| 356 | if (ret) |
| 357 | printf("DMA stop timeout error!\n"); |
| 358 | } |
| 359 | |
| 360 | static int mt7628_eth_write_hwaddr(struct udevice *dev) |
| 361 | { |
| 362 | struct mt7628_eth_dev *priv = dev_get_priv(dev); |
| 363 | void __iomem *base = priv->base; |
| 364 | u8 *addr = ((struct eth_pdata *)dev_get_platdata(dev))->enetaddr; |
| 365 | u32 val; |
| 366 | |
| 367 | /* Set MAC address. */ |
| 368 | val = addr[0]; |
| 369 | val = (val << 8) | addr[1]; |
| 370 | writel(val, base + SDM_MAC_ADRH); |
| 371 | |
| 372 | val = addr[2]; |
| 373 | val = (val << 8) | addr[3]; |
| 374 | val = (val << 8) | addr[4]; |
| 375 | val = (val << 8) | addr[5]; |
| 376 | writel(val, base + SDM_MAC_ADRL); |
| 377 | |
| 378 | return 0; |
| 379 | } |
| 380 | |
| 381 | static int mt7628_eth_send(struct udevice *dev, void *packet, int length) |
| 382 | { |
| 383 | struct mt7628_eth_dev *priv = dev_get_priv(dev); |
| 384 | void __iomem *base = priv->base; |
| 385 | int ret; |
| 386 | int idx; |
| 387 | int i; |
| 388 | |
| 389 | idx = priv->tx_dma_idx; |
| 390 | |
| 391 | /* Pad message to a minimum length */ |
| 392 | if (length < PADDING_LENGTH) { |
| 393 | char *p = (char *)packet; |
| 394 | |
| 395 | for (i = 0; i < PADDING_LENGTH - length; i++) |
| 396 | p[length + i] = 0; |
| 397 | length = PADDING_LENGTH; |
| 398 | } |
| 399 | |
| 400 | /* Check if buffer is ready for next TX DMA */ |
| 401 | ret = wait_for_bit_le32(&priv->tx_ring[idx].txd2, TX_DMA_DONE, true, |
| 402 | CONFIG_TX_DMA_TIMEOUT, false); |
| 403 | if (ret) { |
| 404 | printf("TX: DMA still busy on buffer %d\n", idx); |
| 405 | return ret; |
| 406 | } |
| 407 | |
| 408 | flush_dcache_range((u32)packet, (u32)packet + length); |
| 409 | |
| 410 | priv->tx_ring[idx].txd1 = CPHYSADDR(packet); |
| 411 | priv->tx_ring[idx].txd2 &= ~TX_DMA_PLEN0; |
| 412 | priv->tx_ring[idx].txd2 |= FIELD_PREP(TX_DMA_PLEN0, length); |
| 413 | priv->tx_ring[idx].txd2 &= ~TX_DMA_DONE; |
| 414 | |
| 415 | idx = (idx + 1) % NUM_TX_DESC; |
| 416 | |
| 417 | /* Make sure the writes executed at this place */ |
| 418 | wmb(); |
| 419 | writel(idx, base + TX_CTX_IDX0); |
| 420 | |
| 421 | priv->tx_dma_idx = idx; |
| 422 | |
| 423 | return 0; |
| 424 | } |
| 425 | |
| 426 | static int mt7628_eth_recv(struct udevice *dev, int flags, uchar **packetp) |
| 427 | { |
| 428 | struct mt7628_eth_dev *priv = dev_get_priv(dev); |
| 429 | u32 rxd_info; |
| 430 | int length; |
| 431 | int idx; |
| 432 | |
| 433 | idx = priv->rx_dma_idx; |
| 434 | |
| 435 | rxd_info = priv->rx_ring[idx].rxd2; |
| 436 | if ((rxd_info & RX_DMA_DONE) == 0) |
| 437 | return -EAGAIN; |
| 438 | |
| 439 | length = FIELD_GET(RX_DMA_PLEN0, priv->rx_ring[idx].rxd2); |
| 440 | if (length == 0 || length > MTK_QDMA_PAGE_SIZE) { |
| 441 | printf("%s: invalid length (%d bytes)\n", __func__, length); |
developer | ba57a6b | 2019-09-25 17:45:34 +0800 | [diff] [blame] | 442 | mt7628_eth_free_pkt(dev, NULL, 0); |
Stefan Roese | f994768 | 2018-10-26 14:53:27 +0200 | [diff] [blame] | 443 | return -EIO; |
| 444 | } |
| 445 | |
| 446 | *packetp = priv->rx_buf[idx]; |
| 447 | invalidate_dcache_range((u32)*packetp, (u32)*packetp + length); |
| 448 | |
| 449 | priv->rx_ring[idx].rxd4 = 0; |
| 450 | priv->rx_ring[idx].rxd2 = RX_DMA_LSO; |
| 451 | |
| 452 | /* Make sure the writes executed at this place */ |
| 453 | wmb(); |
| 454 | |
| 455 | return length; |
| 456 | } |
| 457 | |
| 458 | static int mt7628_eth_free_pkt(struct udevice *dev, uchar *packet, int length) |
| 459 | { |
| 460 | struct mt7628_eth_dev *priv = dev_get_priv(dev); |
| 461 | void __iomem *base = priv->base; |
| 462 | int idx; |
| 463 | |
| 464 | idx = priv->rx_dma_idx; |
| 465 | |
| 466 | /* Move point to next RXD which wants to alloc */ |
| 467 | writel(idx, base + RX_CALC_IDX0); |
| 468 | |
| 469 | /* Update to Next packet point that was received */ |
| 470 | idx = (idx + 1) % NUM_RX_DESC; |
| 471 | |
| 472 | priv->rx_dma_idx = idx; |
| 473 | |
| 474 | return 0; |
| 475 | } |
| 476 | |
Stefan Roese | f994768 | 2018-10-26 14:53:27 +0200 | [diff] [blame] | 477 | static int mt7628_eth_start(struct udevice *dev) |
| 478 | { |
| 479 | struct mt7628_eth_dev *priv = dev_get_priv(dev); |
| 480 | void __iomem *base = priv->base; |
| 481 | uchar packet[MTK_QDMA_PAGE_SIZE]; |
| 482 | uchar *packetp; |
developer | a564411 | 2019-09-25 17:45:33 +0800 | [diff] [blame] | 483 | int ret; |
Stefan Roese | f994768 | 2018-10-26 14:53:27 +0200 | [diff] [blame] | 484 | int i; |
| 485 | |
| 486 | for (i = 0; i < NUM_RX_DESC; i++) { |
| 487 | memset((void *)&priv->rx_ring[i], 0, sizeof(priv->rx_ring[0])); |
| 488 | priv->rx_ring[i].rxd2 |= RX_DMA_LSO; |
| 489 | priv->rx_ring[i].rxd1 = CPHYSADDR(priv->rx_buf[i]); |
| 490 | } |
| 491 | |
| 492 | for (i = 0; i < NUM_TX_DESC; i++) { |
| 493 | memset((void *)&priv->tx_ring[i], 0, sizeof(priv->tx_ring[0])); |
| 494 | priv->tx_ring[i].txd2 = TX_DMA_LS0 | TX_DMA_DONE; |
| 495 | priv->tx_ring[i].txd4 = FIELD_PREP(TX_DMA_PN, 1); |
| 496 | } |
| 497 | |
| 498 | priv->rx_dma_idx = 0; |
| 499 | priv->tx_dma_idx = 0; |
| 500 | |
| 501 | /* Make sure the writes executed at this place */ |
| 502 | wmb(); |
| 503 | |
| 504 | /* disable delay interrupt */ |
| 505 | writel(0, base + DLY_INT_CFG); |
| 506 | |
| 507 | clrbits_le32(base + PDMA_GLO_CFG, 0xffff0000); |
| 508 | |
| 509 | /* Tell the adapter where the TX/RX rings are located. */ |
| 510 | writel(CPHYSADDR(&priv->rx_ring[0]), base + RX_BASE_PTR0); |
| 511 | writel(CPHYSADDR((u32)&priv->tx_ring[0]), base + TX_BASE_PTR0); |
| 512 | |
| 513 | writel(NUM_RX_DESC, base + RX_MAX_CNT0); |
| 514 | writel(NUM_TX_DESC, base + TX_MAX_CNT0); |
| 515 | |
| 516 | writel(priv->tx_dma_idx, base + TX_CTX_IDX0); |
| 517 | writel(RST_DTX_IDX0, base + PDMA_RST_IDX); |
| 518 | |
| 519 | writel(NUM_RX_DESC - 1, base + RX_CALC_IDX0); |
| 520 | writel(RST_DRX_IDX0, base + PDMA_RST_IDX); |
| 521 | |
| 522 | /* Make sure the writes executed at this place */ |
| 523 | wmb(); |
| 524 | eth_dma_start(priv); |
| 525 | |
developer | a564411 | 2019-09-25 17:45:33 +0800 | [diff] [blame] | 526 | if (priv->phy) { |
| 527 | ret = phy_startup(priv->phy); |
| 528 | if (ret) |
| 529 | return ret; |
Stefan Roese | f994768 | 2018-10-26 14:53:27 +0200 | [diff] [blame] | 530 | |
developer | a564411 | 2019-09-25 17:45:33 +0800 | [diff] [blame] | 531 | if (!priv->phy->link) |
| 532 | return -EAGAIN; |
Stefan Roese | f994768 | 2018-10-26 14:53:27 +0200 | [diff] [blame] | 533 | } |
| 534 | |
| 535 | /* |
| 536 | * The integrated switch seems to queue some received ethernet |
| 537 | * packets in some FIFO. Lets read the already queued packets |
| 538 | * out by using the receive routine, so that these old messages |
| 539 | * are dropped before the new xfer starts. |
| 540 | */ |
| 541 | packetp = &packet[0]; |
| 542 | while (mt7628_eth_recv(dev, 0, &packetp) != -EAGAIN) |
| 543 | mt7628_eth_free_pkt(dev, packetp, 0); |
| 544 | |
| 545 | return 0; |
| 546 | } |
| 547 | |
| 548 | static void mt7628_eth_stop(struct udevice *dev) |
| 549 | { |
| 550 | struct mt7628_eth_dev *priv = dev_get_priv(dev); |
| 551 | |
| 552 | eth_dma_stop(priv); |
| 553 | } |
| 554 | |
| 555 | static int mt7628_eth_probe(struct udevice *dev) |
| 556 | { |
| 557 | struct mt7628_eth_dev *priv = dev_get_priv(dev); |
Stefan Roese | f994768 | 2018-10-26 14:53:27 +0200 | [diff] [blame] | 558 | struct mii_dev *bus; |
developer | a564411 | 2019-09-25 17:45:33 +0800 | [diff] [blame] | 559 | int poll_link_phy; |
Stefan Roese | f994768 | 2018-10-26 14:53:27 +0200 | [diff] [blame] | 560 | int ret; |
| 561 | int i; |
| 562 | |
| 563 | /* Save frame-engine base address for later use */ |
| 564 | priv->base = dev_remap_addr_index(dev, 0); |
| 565 | if (IS_ERR(priv->base)) |
| 566 | return PTR_ERR(priv->base); |
| 567 | |
| 568 | /* Save switch base address for later use */ |
| 569 | priv->eth_sw_base = dev_remap_addr_index(dev, 1); |
| 570 | if (IS_ERR(priv->eth_sw_base)) |
| 571 | return PTR_ERR(priv->eth_sw_base); |
| 572 | |
developer | e4387bd | 2019-09-25 17:45:32 +0800 | [diff] [blame] | 573 | /* Reset controller */ |
| 574 | ret = reset_get_by_name(dev, "ephy", &priv->rst_ephy); |
Stefan Roese | f994768 | 2018-10-26 14:53:27 +0200 | [diff] [blame] | 575 | if (ret) { |
developer | e4387bd | 2019-09-25 17:45:32 +0800 | [diff] [blame] | 576 | pr_err("unable to find reset controller for ethernet PHYs\n"); |
Stefan Roese | f994768 | 2018-10-26 14:53:27 +0200 | [diff] [blame] | 577 | return ret; |
| 578 | } |
| 579 | |
developer | 33272b6 | 2019-09-25 17:45:35 +0800 | [diff] [blame] | 580 | /* WAN port will be isolated from LAN ports */ |
| 581 | priv->wan_port = dev_read_u32_default(dev, "mediatek,wan-port", -1); |
| 582 | |
Stefan Roese | f994768 | 2018-10-26 14:53:27 +0200 | [diff] [blame] | 583 | /* Put rx and tx rings into KSEG1 area (uncached) */ |
| 584 | priv->tx_ring = (struct fe_tx_dma *) |
| 585 | KSEG1ADDR(memalign(ARCH_DMA_MINALIGN, |
| 586 | sizeof(*priv->tx_ring) * NUM_TX_DESC)); |
| 587 | priv->rx_ring = (struct fe_rx_dma *) |
| 588 | KSEG1ADDR(memalign(ARCH_DMA_MINALIGN, |
| 589 | sizeof(*priv->rx_ring) * NUM_RX_DESC)); |
| 590 | |
| 591 | for (i = 0; i < NUM_RX_DESC; i++) |
| 592 | priv->rx_buf[i] = memalign(PKTALIGN, MTK_QDMA_PAGE_SIZE); |
| 593 | |
| 594 | bus = mdio_alloc(); |
| 595 | if (!bus) { |
| 596 | printf("Failed to allocate MDIO bus\n"); |
| 597 | return -ENOMEM; |
| 598 | } |
| 599 | |
| 600 | bus->read = mt7628_mdio_read; |
| 601 | bus->write = mt7628_mdio_write; |
| 602 | snprintf(bus->name, sizeof(bus->name), dev->name); |
| 603 | bus->priv = (void *)priv; |
| 604 | |
| 605 | ret = mdio_register(bus); |
| 606 | if (ret) |
| 607 | return ret; |
| 608 | |
developer | a564411 | 2019-09-25 17:45:33 +0800 | [diff] [blame] | 609 | poll_link_phy = dev_read_u32_default(dev, "mediatek,poll-link-phy", -1); |
| 610 | if (poll_link_phy >= 0) { |
| 611 | if (poll_link_phy >= NUM_PHYS) { |
| 612 | pr_err("invalid phy %d for poll-link-phy\n", |
| 613 | poll_link_phy); |
| 614 | return ret; |
| 615 | } |
| 616 | |
| 617 | priv->phy = phy_connect(bus, poll_link_phy, dev, |
| 618 | PHY_INTERFACE_MODE_MII); |
| 619 | if (!priv->phy) { |
| 620 | pr_err("failed to probe phy %d\n", poll_link_phy); |
| 621 | return -ENODEV; |
| 622 | } |
| 623 | |
| 624 | priv->phy->advertising = priv->phy->supported; |
| 625 | phy_config(priv->phy); |
| 626 | } |
| 627 | |
Stefan Roese | f994768 | 2018-10-26 14:53:27 +0200 | [diff] [blame] | 628 | /* Switch configuration */ |
| 629 | rt305x_esw_init(priv); |
| 630 | |
| 631 | return 0; |
| 632 | } |
| 633 | |
| 634 | static const struct eth_ops mt7628_eth_ops = { |
| 635 | .start = mt7628_eth_start, |
| 636 | .send = mt7628_eth_send, |
| 637 | .recv = mt7628_eth_recv, |
| 638 | .free_pkt = mt7628_eth_free_pkt, |
| 639 | .stop = mt7628_eth_stop, |
| 640 | .write_hwaddr = mt7628_eth_write_hwaddr, |
| 641 | }; |
| 642 | |
| 643 | static const struct udevice_id mt7628_eth_ids[] = { |
| 644 | { .compatible = "mediatek,mt7628-eth" }, |
| 645 | { } |
| 646 | }; |
| 647 | |
| 648 | U_BOOT_DRIVER(mt7628_eth) = { |
| 649 | .name = "mt7628_eth", |
| 650 | .id = UCLASS_ETH, |
| 651 | .of_match = mt7628_eth_ids, |
| 652 | .probe = mt7628_eth_probe, |
| 653 | .ops = &mt7628_eth_ops, |
Simon Glass | 8a2b47f | 2020-12-03 16:55:17 -0700 | [diff] [blame] | 654 | .priv_auto = sizeof(struct mt7628_eth_dev), |
Simon Glass | 71fa5b4 | 2020-12-03 16:55:18 -0700 | [diff] [blame^] | 655 | .plat_auto = sizeof(struct eth_pdata), |
Stefan Roese | f994768 | 2018-10-26 14:53:27 +0200 | [diff] [blame] | 656 | }; |