| Troy Kisky | 9870e97 | 2012-10-22 16:40:39 +0000 | [diff] [blame] | 1 | U-boot config options used in fec_mxc.c |
| 2 | |
| 3 | CONFIG_FEC_MXC |
| 4 | Selects fec_mxc.c to be compiled into u-boot. |
| 5 | |
| 6 | CONFIG_MII |
| 7 | Must be defined if CONFIG_FEC_MXC is defined. |
| 8 | |
| 9 | CONFIG_FEC_XCV_TYPE |
| 10 | Defaults to MII100 for 100 Base-tx. |
| 11 | RGMII selects 1000 Base-tx reduced pin count interface. |
| 12 | RMII selects 100 Base-tx reduced pin count interface. |
| 13 | |
| 14 | CONFIG_FEC_MXC_SWAP_PACKET |
| 15 | Forced on iff MX28. |
| 16 | Swaps the bytes order of all words(4 byte units) in the packet. |
| 17 | This should not be specified by a board file. It is cpu specific. |
| 18 | |
| 19 | CONFIG_PHYLIB |
| 20 | fec_mxc supports PHYLIB and should be used for new boards. |
| 21 | |
| 22 | CONFIG_FEC_MXC_NO_ANEG |
| 23 | Relevant only if PHYLIB not used. Skips auto-negotiation restart. |
| 24 | |
| 25 | CONFIG_FEC_MXC_PHYADDR |
| 26 | Optional, selects the exact phy address that should be connected |
| 27 | and function fecmxc_initialize will try to initialize it. |