David Wu | 5f596ae | 2019-01-02 21:00:55 +0800 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0+ |
| 2 | /* |
| 3 | * (C) Copyright 2019 Rockchip Electronics Co., Ltd |
| 4 | */ |
| 5 | |
| 6 | #include <common.h> |
| 7 | #include <dm.h> |
| 8 | #include <dm/pinctrl.h> |
| 9 | #include <regmap.h> |
| 10 | #include <syscon.h> |
| 11 | |
| 12 | #include "pinctrl-rockchip.h" |
| 13 | |
| 14 | #define RK3188_PULL_OFFSET 0x164 |
| 15 | #define RK3188_PULL_PMU_OFFSET 0x64 |
| 16 | |
| 17 | static void rk3188_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank, |
| 18 | int pin_num, struct regmap **regmap, |
| 19 | int *reg, u8 *bit) |
| 20 | { |
| 21 | struct rockchip_pinctrl_priv *priv = bank->priv; |
| 22 | |
| 23 | /* The first 12 pins of the first bank are located elsewhere */ |
| 24 | if (bank->bank_num == 0 && pin_num < 12) { |
| 25 | *regmap = priv->regmap_pmu; |
| 26 | *reg = RK3188_PULL_PMU_OFFSET; |
| 27 | |
| 28 | *reg += ((pin_num / ROCKCHIP_PULL_PINS_PER_REG) * 4); |
| 29 | *bit = pin_num % ROCKCHIP_PULL_PINS_PER_REG; |
| 30 | *bit *= ROCKCHIP_PULL_BITS_PER_PIN; |
| 31 | } else { |
| 32 | *regmap = priv->regmap_base; |
| 33 | *reg = RK3188_PULL_OFFSET; |
| 34 | |
| 35 | /* correct the offset, as it is the 2nd pull register */ |
| 36 | *reg -= 4; |
| 37 | *reg += bank->bank_num * ROCKCHIP_PULL_BANK_STRIDE; |
| 38 | *reg += ((pin_num / ROCKCHIP_PULL_PINS_PER_REG) * 4); |
| 39 | |
| 40 | /* |
| 41 | * The bits in these registers have an inverse ordering |
| 42 | * with the lowest pin being in bits 15:14 and the highest |
| 43 | * pin in bits 1:0 |
| 44 | */ |
| 45 | *bit = 7 - (pin_num % ROCKCHIP_PULL_PINS_PER_REG); |
| 46 | *bit *= ROCKCHIP_PULL_BITS_PER_PIN; |
| 47 | } |
| 48 | } |
| 49 | |
| 50 | static struct rockchip_pin_bank rk3188_pin_banks[] = { |
| 51 | PIN_BANK_IOMUX_FLAGS(0, 32, "gpio0", IOMUX_GPIO_ONLY, 0, 0, 0), |
| 52 | PIN_BANK(1, 32, "gpio1"), |
| 53 | PIN_BANK(2, 32, "gpio2"), |
| 54 | PIN_BANK(3, 32, "gpio3"), |
| 55 | }; |
| 56 | |
| 57 | static struct rockchip_pin_ctrl rk3188_pin_ctrl = { |
| 58 | .pin_banks = rk3188_pin_banks, |
| 59 | .nr_banks = ARRAY_SIZE(rk3188_pin_banks), |
| 60 | .label = "RK3188-GPIO", |
| 61 | .type = RK3188, |
| 62 | .grf_mux_offset = 0x60, |
| 63 | .pull_calc_reg = rk3188_calc_pull_reg_and_bit, |
| 64 | }; |
| 65 | |
| 66 | static const struct udevice_id rk3188_pinctrl_ids[] = { |
| 67 | { .compatible = "rockchip,rk3188-pinctrl", |
| 68 | .data = (ulong)&rk3188_pin_ctrl }, |
| 69 | { } |
| 70 | }; |
| 71 | |
| 72 | U_BOOT_DRIVER(pinctrl_rk3188) = { |
| 73 | .name = "rockchip_rk3188_pinctrl", |
| 74 | .id = UCLASS_PINCTRL, |
| 75 | .of_match = rk3188_pinctrl_ids, |
| 76 | .priv_auto_alloc_size = sizeof(struct rockchip_pinctrl_priv), |
| 77 | .ops = &rockchip_pinctrl_ops, |
| 78 | #if !CONFIG_IS_ENABLED(OF_PLATDATA) |
| 79 | .bind = dm_scan_fdt_dev, |
| 80 | #endif |
| 81 | .probe = rockchip_pinctrl_probe, |
| 82 | }; |