| Peng Fan | 702c6dc | 2018-10-18 14:28:37 +0200 | [diff] [blame^] | 1 | U-Boot for the NXP i.MX8QXP EVK board |
| 2 | |
| 3 | Quick Start |
| 4 | =========== |
| 5 | |
| 6 | - Build U-Boot |
| 7 | - Build the ARM Trusted firmware binary |
| 8 | - Get scfw_tcm.bin and ahab-container.img |
| 9 | - Get mkimage tool |
| 10 | - Generate flash.bin using imx-mkimage |
| 11 | - Flash the binary into the SD card |
| 12 | - Boot |
| 13 | |
| 14 | Build U-Boot |
| 15 | ============ |
| 16 | |
| 17 | $ make imx8qxp_mek_defconfig |
| 18 | $ make |
| 19 | |
| 20 | Get and Build the ARM Trusted firmware |
| 21 | ====================================== |
| 22 | |
| 23 | $ git clone https://source.codeaurora.org/external/imx/imx-atf |
| 24 | $ cd imx-atf/ |
| 25 | $ git checkout origin/imx_4.9.88_imx8qxp_beta2 -b imx_4.9.88_imx8qxp_beta2 |
| 26 | $ make PLAT=imx8qxp bl31 |
| 27 | |
| 28 | Get scfw_tcm.bin and ahab-container.img |
| 29 | ============================== |
| 30 | |
| 31 | $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/imx-sc-firmware-0.7.bin |
| 32 | $ chmod +x imx-sc-firmware-0.7.bin |
| 33 | $ ./imx-sc-firmware-0.7.bin |
| 34 | $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-7.6.bin |
| 35 | $ chmod +x firmware-imx-7.6.bin |
| 36 | $ ./firmware-imx-7.6.bin |
| 37 | |
| 38 | Get imx-mkimage tool |
| 39 | ============================== |
| 40 | Download the imx-mkimage tool: |
| 41 | |
| 42 | $ git clone https://source.codeaurora.org/external/imx/imx-mkimage/ |
| 43 | $ cd imx-mkimage/ |
| 44 | $ git checkout origin/imx_4.9.88_imx8qxp_beta2 -b imx_4.9.88_imx8qxp_beta2 |
| 45 | |
| 46 | |
| 47 | Generate flash.bin using imx-mkimage |
| 48 | ==================================== |
| 49 | |
| 50 | Copy the following binaries to imx-mkimage/iMX8M folder: |
| 51 | |
| 52 | $ cp imx-atf/build/imx8qxp/release/bl31.bin imx-mkimage/iMX8QX/ |
| 53 | $ cp u-boot/u-boot.bin imx-mkimage/iMX8QX/ |
| 54 | |
| 55 | Copy the following firmwares to imx-mkimage/iMX8 folder : |
| 56 | |
| 57 | $ cp firmware-imx-7.6/firmware/seco/ahab-container.img imx-mkimage/iMX8QX/ |
| 58 | $ cp imx-sc-firmware-0.7/mx8qx-mek-scfw-tcm.bin imx-mkimage/iMX8QX/scfw_tcm.bin |
| 59 | |
| 60 | $ cd imx-mkimage/ |
| 61 | $ make SOC=iMX8QX flash |
| 62 | |
| 63 | Flash the binary into the SD card |
| 64 | ================================= |
| 65 | |
| 66 | Burn the flash.bin binary to SD card offset 32KB: |
| 67 | |
| 68 | $ sudo dd if=iMX8QX/flash.bin of=/dev/sd[x] bs=1024 seek=32 |
| 69 | |
| 70 | Boot |
| 71 | ==== |
| 72 | Set Boot switch SW2: 1100. |