blob: 86a4579fbdb5ac54828c1248a06f2ecf2c26919d [file] [log] [blame]
Michal Simek04b7e622015-01-15 10:01:51 +01001/*
2 * Configuration for Xilinx ZynqMP
3 * (C) Copyright 2014 - 2015 Xilinx, Inc.
4 * Michal Simek <michal.simek@xilinx.com>
5 *
6 * Based on Configuration for Versatile Express
7 *
8 * SPDX-License-Identifier: GPL-2.0+
9 */
10
11#ifndef __XILINX_ZYNQMP_H
12#define __XILINX_ZYNQMP_H
13
14#define CONFIG_REMAKE_ELF
15
16/* #define CONFIG_ARMV8_SWITCH_TO_EL1 */
17
Michal Simek04b7e622015-01-15 10:01:51 +010018/* Generic Interrupt Controller Definitions */
19#define CONFIG_GICV2
20#define GICD_BASE 0xF9010000
21#define GICC_BASE 0xF9020000
22
Michal Simekbae19002015-10-15 14:34:28 +020023#define CONFIG_SYS_ALT_MEMTEST
24#define CONFIG_SYS_MEMTEST_SCRATCH 0xfffc0000
25
Michal Simek8faa66a2016-02-08 09:34:53 +010026#ifndef CONFIG_NR_DRAM_BANKS
27# define CONFIG_NR_DRAM_BANKS 2
28#endif
29#define CONFIG_SYS_MEMTEST_START 0
30#define CONFIG_SYS_MEMTEST_END 1000
Michal Simek04b7e622015-01-15 10:01:51 +010031
Soren Brinkmanne911cd02016-07-27 14:12:03 -070032#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE
Michal Simek04b7e622015-01-15 10:01:51 +010033
Michal Simek04b7e622015-01-15 10:01:51 +010034/* Generic Timer Definitions - setup in EL3. Setup by ATF for other cases */
Michal Simekd48a1702015-11-05 08:32:14 +010035#if !defined(COUNTER_FREQUENCY)
36# define COUNTER_FREQUENCY 100000000
37#endif
Michal Simek04b7e622015-01-15 10:01:51 +010038
39/* Size of malloc() pool */
Siva Durga Prasad Paladuguba1f68e2015-08-04 13:03:26 +053040#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 0x2000000)
Michal Simek04b7e622015-01-15 10:01:51 +010041
42/* Serial setup */
Michal Simekd5c13f72016-02-23 10:02:29 +010043#define CONFIG_ARM_DCC
44#define CONFIG_CPU_ARMV8
45#define CONFIG_ZYNQ_SERIAL
Michal Simek04b7e622015-01-15 10:01:51 +010046
47#define CONFIG_CONS_INDEX 0
Michal Simek04b7e622015-01-15 10:01:51 +010048#define CONFIG_SYS_BAUDRATE_TABLE \
49 { 4800, 9600, 19200, 38400, 57600, 115200 }
50
51/* Command line configuration */
Michal Simek58f865f2015-04-15 13:36:40 +020052#define CONFIG_MP
Michal Simek04b7e622015-01-15 10:01:51 +010053
Michal Simekc68918e2015-07-23 12:03:55 +020054/* BOOTP options */
55#define CONFIG_BOOTP_BOOTFILESIZE
56#define CONFIG_BOOTP_BOOTPATH
57#define CONFIG_BOOTP_GATEWAY
58#define CONFIG_BOOTP_HOSTNAME
59#define CONFIG_BOOTP_MAY_FAIL
Michal Simek00615562016-04-22 14:28:17 +020060#define CONFIG_BOOTP_DNS
61#define CONFIG_BOOTP_PXE
62#define CONFIG_BOOTP_SUBNETMASK
Michal Simek00615562016-04-22 14:28:17 +020063
64/* Diff from config_distro_defaults.h */
65#define CONFIG_SUPPORT_RAW_INITRD
Michal Simek12398ea2016-08-19 14:14:52 +020066#if !defined(CONFIG_SPL_BUILD)
Michal Simek00615562016-04-22 14:28:17 +020067#define CONFIG_ENV_VARS_UBOOT_CONFIG
Michal Simek12398ea2016-08-19 14:14:52 +020068#endif
Michal Simek00615562016-04-22 14:28:17 +020069#define CONFIG_AUTO_COMPLETE
70
Masahiro Yamada168c57d2017-01-30 19:46:51 +090071#if defined(CONFIG_MMC_SDHCI_ZYNQ)
Michal Simekfe875952016-04-26 16:03:42 +020072# define CONFIG_SUPPORT_EMMC_BOOT
Michal Simek8bc78172015-09-29 01:27:13 +020073# ifndef CONFIG_ZYNQ_SDHCI_MAX_FREQ
74# define CONFIG_ZYNQ_SDHCI_MAX_FREQ 200000000
75# endif
Siva Durga Prasad Paladugu84aa1342016-11-18 10:27:48 +053076# define CONFIG_ENV_IS_IN_FAT
77# define FAT_ENV_DEVICE_AND_PART "0:auto"
78# define FAT_ENV_FILE "uboot.env"
79# define FAT_ENV_INTERFACE "mmc"
Michal Simeka86995b2016-03-18 18:10:21 +010080#endif
81
Siva Durga Prasad Paladugu937ad762015-11-17 14:30:09 +053082#ifdef CONFIG_NAND_ARASAN
Siva Durga Prasad Paladugu937ad762015-11-17 14:30:09 +053083# define CONFIG_CMD_NAND_LOCK_UNLOCK
84# define CONFIG_SYS_MAX_NAND_DEVICE 1
85# define CONFIG_SYS_NAND_SELF_INIT
86# define CONFIG_SYS_NAND_ONFI_DETECTION
87# define CONFIG_MTD_DEVICE
88#endif
89
Michal Simek04b7e622015-01-15 10:01:51 +010090/* Miscellaneous configurable options */
91#define CONFIG_SYS_LOAD_ADDR 0x8000000
92
Siva Durga Prasad Paladuguba1f68e2015-08-04 13:03:26 +053093#if defined(CONFIG_ZYNQMP_USB)
Siva Durga Prasad Paladugu86746532015-11-16 16:49:24 +053094#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
Siva Durga Prasad Paladugu86746532015-11-16 16:49:24 +053095
Siva Durga Prasad Paladuguba1f68e2015-08-04 13:03:26 +053096#define CONFIG_SYS_DFU_DATA_BUF_SIZE 0x1800000
97#define DFU_DEFAULT_POLL_TIMEOUT 300
Siva Durga Prasad Paladuguba1f68e2015-08-04 13:03:26 +053098#define CONFIG_USB_CABLE_CHECK
Siva Durga Prasad Paladuguba1f68e2015-08-04 13:03:26 +053099#define CONFIG_CMD_THOR_DOWNLOAD
100#define CONFIG_USB_FUNCTION_THOR
101#define CONFIG_THOR_RESET_OFF
102#define DFU_ALT_INFO_RAM \
103 "dfu_ram_info=" \
Siva Durga Prasad Paladuguc2d11502015-09-11 11:57:25 +0530104 "setenv dfu_alt_info " \
Siva Durga Prasad Paladugue69d0fe2015-09-07 11:03:47 +0530105 "Image ram $kernel_addr $kernel_size\\\\;" \
106 "system.dtb ram $fdt_addr $fdt_size\0" \
Siva Durga Prasad Paladuguba1f68e2015-08-04 13:03:26 +0530107 "dfu_ram=run dfu_ram_info && dfu 0 ram 0\0" \
108 "thor_ram=run dfu_ram_info && thordown 0 ram 0\0"
109
110#define DFU_ALT_INFO \
111 DFU_ALT_INFO_RAM
Siva Durga Prasad Paladugu82e7fb22016-05-12 10:54:41 +0530112
113#ifndef CONFIG_SPL_BUILD
114# define CONFIG_USB_FUNCTION_FASTBOOT
115# define CONFIG_CMD_FASTBOOT
116# define CONFIG_ANDROID_BOOT_IMAGE
117# define CONFIG_FASTBOOT_BUF_ADDR 0x100000
118# define CONFIG_FASTBOOT_BUF_SIZE 0x6000000
119# define CONFIG_FASTBOOT_FLASH
Masahiro Yamada168c57d2017-01-30 19:46:51 +0900120# ifdef CONFIG_MMC_SDHCI_ZYNQ
Siva Durga Prasad Paladugu82e7fb22016-05-12 10:54:41 +0530121# define CONFIG_FASTBOOT_FLASH_MMC_DEV 0
122# endif
Siva Durga Prasad Paladugu82e7fb22016-05-12 10:54:41 +0530123
124# define CONFIG_RANDOM_UUID
125# define PARTS_DEFAULT \
126 "partitions=uuid_disk=${uuid_gpt_disk};" \
127 "name=""boot"",size=16M,uuid=${uuid_gpt_boot};" \
128 "name=""Linux"",size=-M,uuid=${uuid_gpt_Linux}\0"
129#endif
Siva Durga Prasad Paladuguba1f68e2015-08-04 13:03:26 +0530130#endif
131
132#if !defined(DFU_ALT_INFO)
133# define DFU_ALT_INFO
134#endif
135
Siva Durga Prasad Paladugu82e7fb22016-05-12 10:54:41 +0530136#if !defined(PARTS_DEFAULT)
137# define PARTS_DEFAULT
138#endif
139
Michal Simek04b7e622015-01-15 10:01:51 +0100140/* Do not preserve environment */
Siva Durga Prasad Paladugu84aa1342016-11-18 10:27:48 +0530141#if !defined(CONFIG_ENV_IS_IN_FAT)
Michal Simek04b7e622015-01-15 10:01:51 +0100142#define CONFIG_ENV_IS_NOWHERE 1
Siva Durga Prasad Paladugu84aa1342016-11-18 10:27:48 +0530143#endif
Siva Durga Prasad Paladuguebb3ebd2016-11-18 10:27:47 +0530144#define CONFIG_ENV_SIZE 0x8000
Michal Simek04b7e622015-01-15 10:01:51 +0100145
146/* Monitor Command Prompt */
147/* Console I/O Buffer Size */
148#define CONFIG_SYS_CBSIZE 2048
Michal Simek04b7e622015-01-15 10:01:51 +0100149#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
150 sizeof(CONFIG_SYS_PROMPT) + 16)
Michal Simek04b7e622015-01-15 10:01:51 +0100151#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
152#define CONFIG_SYS_LONGHELP
153#define CONFIG_CMDLINE_EDITING
154#define CONFIG_SYS_MAXARGS 64
155
Michal Simekc68918e2015-07-23 12:03:55 +0200156/* Ethernet driver */
Michal Simek3d7285f2015-11-30 14:34:52 +0100157#if defined(CONFIG_ZYNQ_GEM)
Michal Simekc68918e2015-07-23 12:03:55 +0200158# define CONFIG_NET_MULTI
Michal Simekc68918e2015-07-23 12:03:55 +0200159# define CONFIG_MII
160# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
Michal Simekc68918e2015-07-23 12:03:55 +0200161# define CONFIG_PHY_MARVELL
Michal Simekb7a4c9b2015-09-23 19:35:31 +0200162# define CONFIG_PHY_NATSEMI
Michal Simek1a113392015-11-10 10:48:05 +0100163# define CONFIG_PHY_TI
Michal Simekf3da2f02015-09-24 20:12:29 +0200164# define CONFIG_PHY_GIGE
Michal Simek2a503592016-05-30 10:13:37 +0200165# define CONFIG_PHY_VITESSE
166# define CONFIG_PHY_REALTEK
Siva Durga Prasad Paladugu73551042016-01-05 15:21:46 +0530167# define PHY_ANEG_TIMEOUT 20000
Michal Simekc68918e2015-07-23 12:03:55 +0200168#endif
169
Siva Durga Prasad Paladugu055792a2015-03-03 15:01:44 +0530170/* I2C */
171#if defined(CONFIG_SYS_I2C_ZYNQ)
Siva Durga Prasad Paladugu055792a2015-03-03 15:01:44 +0530172# define CONFIG_SYS_I2C
173# define CONFIG_SYS_I2C_ZYNQ_SPEED 100000
174# define CONFIG_SYS_I2C_ZYNQ_SLAVE 0
175#endif
176
Siva Durga Prasad Paladugu055792a2015-03-03 15:01:44 +0530177/* EEPROM */
178#ifdef CONFIG_ZYNQMP_EEPROM
Siva Durga Prasad Paladugu055792a2015-03-03 15:01:44 +0530179# define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
180# define CONFIG_SYS_I2C_EEPROM_ADDR 0x54
181# define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4
182# define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
183# define CONFIG_SYS_EEPROM_SIZE (64 * 1024)
184#endif
185
Michal Simeke8de9892016-06-01 14:29:33 +0200186#ifdef CONFIG_SATA_CEVA
Michal Simekb216cc12015-07-23 13:27:40 +0200187#define CONFIG_LIBATA
188#define CONFIG_SCSI_AHCI
Michal Simekd54b1af2015-09-30 17:26:55 +0200189#define CONFIG_SYS_SCSI_MAX_SCSI_ID 2
Michal Simekb216cc12015-07-23 13:27:40 +0200190#define CONFIG_SYS_SCSI_MAX_LUN 1
191#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
192 CONFIG_SYS_SCSI_MAX_LUN)
Simon Glass8706b812016-05-01 11:36:02 -0600193#define CONFIG_SCSI
Michal Simekb216cc12015-07-23 13:27:40 +0200194#endif
195
Michal Simek04b7e622015-01-15 10:01:51 +0100196#define CONFIG_SYS_BOOTM_LEN (60 * 1024 * 1024)
197
Michal Simek04b7e622015-01-15 10:01:51 +0100198#define CONFIG_BOARD_EARLY_INIT_R
199#define CONFIG_CLOCKS
200
Michal Simekecfb6dc2016-04-22 14:28:54 +0200201#define ENV_MEM_LAYOUT_SETTINGS \
202 "fdt_high=10000000\0" \
203 "initrd_high=10000000\0" \
204 "fdt_addr_r=0x40000000\0" \
205 "pxefile_addr_r=0x10000000\0" \
206 "kernel_addr_r=0x18000000\0" \
207 "scriptaddr=0x02000000\0" \
208 "ramdisk_addr_r=0x02100000\0" \
209
Masahiro Yamada168c57d2017-01-30 19:46:51 +0900210#if defined(CONFIG_MMC_SDHCI_ZYNQ)
Michal Simekecfb6dc2016-04-22 14:28:54 +0200211# define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0) func(MMC, mmc, 1)
212#else
213# define BOOT_TARGET_DEVICES_MMC(func)
214#endif
215
216#if defined(CONFIG_SATA_CEVA)
217# define BOOT_TARGET_DEVICES_SCSI(func) func(SCSI, scsi, 0)
218#else
219# define BOOT_TARGET_DEVICES_SCSI(func)
220#endif
221
222#if defined(CONFIG_ZYNQMP_USB)
223# define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0) func(USB, usb, 1)
224#else
225# define BOOT_TARGET_DEVICES_USB(func)
226#endif
227
228#define BOOT_TARGET_DEVICES(func) \
229 BOOT_TARGET_DEVICES_MMC(func) \
230 BOOT_TARGET_DEVICES_USB(func) \
231 BOOT_TARGET_DEVICES_SCSI(func) \
232 func(PXE, pxe, na) \
233 func(DHCP, dhcp, na)
234
235#include <config_distro_bootcmd.h>
236
237/* Initial environment variables */
238#ifndef CONFIG_EXTRA_ENV_SETTINGS
239#define CONFIG_EXTRA_ENV_SETTINGS \
240 ENV_MEM_LAYOUT_SETTINGS \
241 BOOTENV \
242 DFU_ALT_INFO
243#endif
244
Michal Simek12398ea2016-08-19 14:14:52 +0200245/* SPL can't handle all huge variables - define just DFU */
246#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_DFU_SUPPORT)
247#undef CONFIG_EXTRA_ENV_SETTINGS
248# define CONFIG_EXTRA_ENV_SETTINGS \
249 "dfu_alt_info_ram=uboot.bin ram 0x8000000 0x1000000;" \
250 "atf-uboot.ub ram 0x10000000 0x1000000;" \
251 "Image ram 0x80000 0x3f80000;" \
252 "system.dtb ram 0x4000000 0x100000\0" \
253 "dfu_bufsiz=0x1000\0"
254#endif
255
Michal Simek72536fd2015-11-20 13:17:22 +0100256#define CONFIG_SPL_TEXT_BASE 0xfffc0000
Soren Brinkmanne911cd02016-07-27 14:12:03 -0700257#define CONFIG_SPL_STACK 0xfffffffc
Michal Simek12398ea2016-08-19 14:14:52 +0200258#define CONFIG_SPL_MAX_SIZE 0x40000
Michal Simek72536fd2015-11-20 13:17:22 +0100259
260/* Just random location in OCM */
Michal Simek89e1f762016-08-30 14:58:46 +0200261#define CONFIG_SPL_BSS_START_ADDR 0x0
262#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
Michal Simek72536fd2015-11-20 13:17:22 +0100263
264#define CONFIG_SPL_FRAMEWORK
Michal Simek72536fd2015-11-20 13:17:22 +0100265
Michal Simek72536fd2015-11-20 13:17:22 +0100266/* u-boot is like dtb */
267#define CONFIG_SPL_FS_LOAD_ARGS_NAME "u-boot.bin"
268#define CONFIG_SYS_SPL_ARGS_ADDR 0x8000000
269
270/* ATF is my kernel image */
Michal Simekf5140be2016-09-21 11:42:58 +0200271#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "atf-uboot.ub"
Michal Simek72536fd2015-11-20 13:17:22 +0100272
273/* FIT load address for RAM boot */
274#define CONFIG_SPL_LOAD_FIT_ADDRESS 0x10000000
275
276/* MMC support */
Masahiro Yamada168c57d2017-01-30 19:46:51 +0900277#ifdef CONFIG_MMC_SDHCI_ZYNQ
Michal Simek72536fd2015-11-20 13:17:22 +0100278# define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
279# define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0 /* unused */
280# define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0 /* unused */
281# define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0 /* unused */
Michal Simek72536fd2015-11-20 13:17:22 +0100282# define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
283#endif
284
Michal Simek12398ea2016-08-19 14:14:52 +0200285#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_DFU_SUPPORT)
286# undef CONFIG_CMD_BOOTD
287# define CONFIG_SPL_ENV_SUPPORT
288# define CONFIG_SPL_HASH_SUPPORT
289# define CONFIG_ENV_MAX_ENTRIES 10
290
291# define CONFIG_SYS_SPL_MALLOC_START 0x20000000
Michal Simek1a8c43e2016-10-14 14:06:28 +0200292# define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
Michal Simek12398ea2016-08-19 14:14:52 +0200293
294#ifdef CONFIG_SPL_SYS_MALLOC_SIMPLE
295# error "Disable CONFIG_SPL_SYS_MALLOC_SIMPLE. Full malloc needs to be used"
296#endif
297#endif
298
Michal Simek8b353302017-02-07 14:32:26 +0100299#define CONFIG_BOARD_EARLY_INIT_F
300
Michal Simek04b7e622015-01-15 10:01:51 +0100301#endif /* __XILINX_ZYNQMP_H */