blob: f320792cfd478d8623c2a1765e4c236493eecd14 [file] [log] [blame]
Akshay Bhat9301aea2016-07-29 11:44:46 -04001/*
2 * Copyright (C) 2016 Timesys Corporation
3 * Copyright (C) 2016 Advantech Corporation
4 * Copyright (C) 2012 Freescale Semiconductor, Inc.
5 *
6 * SPDX-License-Identifier: GPL-2.0+
7 */
8
9#ifndef __ADVANTECH_DMSBA16_CONFIG_H
10#define __ADVANTECH_DMSBA16_CONFIG_H
11
12#include <asm/arch/imx-regs.h>
13#include <asm/imx-common/gpio.h>
14
15#define CONFIG_BOARD_NAME "Advantech DMS-BA16"
Akshay Bhat9301aea2016-07-29 11:44:46 -040016
17#define CONFIG_MXC_UART_BASE UART4_BASE
Simon Glass4694a742016-10-17 20:12:39 -060018#define CONSOLE_DEV "ttymxc3"
Akshay Bhat9301aea2016-07-29 11:44:46 -040019#define CONFIG_EXTRA_BOOTARGS "panic=10"
20
21#define CONFIG_BOOT_DIR ""
22#define CONFIG_LOADCMD "fatload"
23#define CONFIG_RFSPART "2"
24
25#define CONFIG_SUPPORT_EMMC_BOOT
26
27#include "mx6_common.h"
28#include <linux/sizes.h>
29
Akshay Bhat9301aea2016-07-29 11:44:46 -040030#define CONFIG_CMDLINE_TAG
31#define CONFIG_SETUP_MEMORY_TAGS
32#define CONFIG_INITRD_TAG
33#define CONFIG_REVISION_TAG
34#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)
35
Akshay Bhat9301aea2016-07-29 11:44:46 -040036#define CONFIG_MXC_GPIO
37#define CONFIG_MXC_UART
38
Akshay Bhat9301aea2016-07-29 11:44:46 -040039#define CONFIG_MXC_OCOTP
40
41/* SATA Configs */
42#define CONFIG_CMD_SATA
43#define CONFIG_DWC_AHSATA
44#define CONFIG_SYS_SATA_MAX_DEVICE 1
45#define CONFIG_DWC_AHSATA_PORT_ID 0
46#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
47#define CONFIG_LBA48
48#define CONFIG_LIBATA
49
50/* MMC Configs */
51#define CONFIG_FSL_ESDHC
52#define CONFIG_FSL_USDHC
53#define CONFIG_SYS_FSL_ESDHC_ADDR 0
Akshay Bhat9301aea2016-07-29 11:44:46 -040054#define CONFIG_BOUNCE_BUFFER
Akshay Bhat9301aea2016-07-29 11:44:46 -040055
56/* USB Configs */
Akshay Bhat9301aea2016-07-29 11:44:46 -040057#define CONFIG_USB_STORAGE
58#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
59#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
60#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
61#define CONFIG_MXC_USB_FLAGS 0
Akshay Bhat9301aea2016-07-29 11:44:46 -040062#define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
63
64#define CONFIG_USBD_HS
65#define CONFIG_USB_FUNCTION_MASS_STORAGE
66#define CONFIG_USB_GADGET_VBUS_DRAW 2
67
68/* Networking Configs */
69#define CONFIG_FEC_MXC
70#define CONFIG_MII
71#define IMX_FEC_BASE ENET_BASE_ADDR
72#define CONFIG_FEC_XCV_TYPE RGMII
73#define CONFIG_ETHPRIME "FEC"
74#define CONFIG_FEC_MXC_PHYADDR 4
75#define CONFIG_PHYLIB
76#define CONFIG_PHY_ATHEROS
77
78/* Serial Flash */
79#ifdef CONFIG_CMD_SF
80#define CONFIG_MXC_SPI
81#define CONFIG_SF_DEFAULT_BUS 0
82#define CONFIG_SF_DEFAULT_CS 0
83#define CONFIG_SF_DEFAULT_SPEED 20000000
84#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
85#endif
86
87/* allow to overwrite serial and ethaddr */
88#define CONFIG_ENV_OVERWRITE
89#define CONFIG_CONS_INDEX 1
Akshay Bhat9301aea2016-07-29 11:44:46 -040090
Akshay Bhat9301aea2016-07-29 11:44:46 -040091#define CONFIG_LOADADDR 0x12000000
92#define CONFIG_SYS_TEXT_BASE 0x17800000
93
94#define CONFIG_EXTRA_ENV_SETTINGS \
95 "script=boot.scr\0" \
96 "image=" CONFIG_BOOT_DIR "/uImage\0" \
97 "uboot=u-boot.imx\0" \
98 "fdt_file=" CONFIG_BOOT_DIR "/" CONFIG_DEFAULT_FDT_FILE "\0" \
99 "fdt_addr=0x18000000\0" \
100 "boot_fdt=yes\0" \
101 "ip_dyn=yes\0" \
Simon Glass4694a742016-10-17 20:12:39 -0600102 "console=" CONSOLE_DEV "\0" \
Akshay Bhat9301aea2016-07-29 11:44:46 -0400103 "fdt_high=0xffffffff\0" \
104 "initrd_high=0xffffffff\0" \
105 "sddev=0\0" \
106 "emmcdev=1\0" \
107 "partnum=1\0" \
108 "loadcmd=" CONFIG_LOADCMD "\0" \
109 "rfspart=" CONFIG_RFSPART "\0" \
110 "update_sd_firmware=" \
111 "if test ${ip_dyn} = yes; then " \
112 "setenv get_cmd dhcp; " \
113 "else " \
114 "setenv get_cmd tftp; " \
115 "fi; " \
116 "if mmc dev ${mmcdev}; then " \
117 "if ${get_cmd} ${update_sd_firmware_filename}; then " \
118 "setexpr fw_sz ${filesize} / 0x200; " \
119 "setexpr fw_sz ${fw_sz} + 1; " \
120 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
121 "fi; " \
122 "fi\0" \
123 "update_sf_uboot=" \
124 "if tftp $loadaddr $uboot; then " \
125 "sf probe; " \
126 "sf erase 0 0xC0000; " \
127 "sf write $loadaddr 0x400 $filesize; " \
128 "echo 'U-Boot upgraded. Please reset'; " \
129 "fi\0" \
130 "setargs=setenv bootargs console=${console},${baudrate} " \
131 "root=/dev/${rootdev} rw rootwait " CONFIG_EXTRA_BOOTARGS "\0" \
132 "loadbootscript=" \
133 "${loadcmd} ${dev} ${devnum}:${partnum} ${loadaddr} ${script};\0" \
134 "bootscript=echo Running bootscript from ${dev}:${devnum}:${partnum};" \
135 " source\0" \
136 "loadimage=" \
137 "${loadcmd} ${dev} ${devnum}:${partnum} ${loadaddr} ${image}\0" \
138 "loadfdt=${loadcmd} ${dev} ${devnum}:${partnum} ${fdt_addr} ${fdt_file}\0" \
139 "tryboot=" \
140 "if run loadbootscript; then " \
141 "run bootscript; " \
142 "else " \
143 "if run loadimage; then " \
144 "run doboot; " \
145 "fi; " \
146 "fi;\0" \
147 "doboot=echo Booting from ${dev}:${devnum}:${partnum} ...; " \
148 "run setargs; " \
149 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
150 "if run loadfdt; then " \
151 "bootm ${loadaddr} - ${fdt_addr}; " \
152 "else " \
153 "if test ${boot_fdt} = try; then " \
154 "bootm; " \
155 "else " \
156 "echo WARN: Cannot load the DT; " \
157 "fi; " \
158 "fi; " \
159 "else " \
160 "bootm; " \
161 "fi;\0" \
162 "netargs=setenv bootargs console=${console},${baudrate} " \
163 "root=/dev/nfs " \
164 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
165 "netboot=echo Booting from net ...; " \
166 "run netargs; " \
167 "if test ${ip_dyn} = yes; then " \
168 "setenv get_cmd dhcp; " \
169 "else " \
170 "setenv get_cmd tftp; " \
171 "fi; " \
172 "${get_cmd} ${image}; " \
173 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
174 "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
175 "bootm ${loadaddr} - ${fdt_addr}; " \
176 "else " \
177 "if test ${boot_fdt} = try; then " \
178 "bootm; " \
179 "else " \
180 "echo WARN: Cannot load the DT; " \
181 "fi; " \
182 "fi; " \
183 "else " \
184 "bootm; " \
185 "fi;\0" \
186
187#define CONFIG_BOOTCOMMAND \
188 "usb start; " \
189 "setenv dev usb; " \
190 "setenv devnum 0; " \
191 "setenv rootdev sda${rfspart}; " \
192 "run tryboot; " \
193 \
194 "setenv dev mmc; " \
195 "setenv rootdev mmcblk0p${rfspart}; " \
196 \
197 "setenv devnum ${sddev}; " \
198 "if mmc dev ${devnum}; then " \
199 "run tryboot; " \
200 "fi; " \
201 \
202 "setenv devnum ${emmcdev}; " \
203 "setenv rootdev mmcblk${emmcdev}p${rfspart}; " \
204 "if mmc dev ${devnum}; then " \
205 "run tryboot; " \
206 "fi; " \
207 \
208 "bmode usb; " \
209
210#define CONFIG_ARP_TIMEOUT 200UL
211
212/* Miscellaneous configurable options */
213#define CONFIG_SYS_LONGHELP
214#define CONFIG_AUTO_COMPLETE
215
216/* Print Buffer Size */
217#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
218#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
219
220#define CONFIG_SYS_MEMTEST_START 0x10000000
221#define CONFIG_SYS_MEMTEST_END 0x10010000
222#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
223
224#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
225
226#define CONFIG_CMDLINE_EDITING
Akshay Bhat9301aea2016-07-29 11:44:46 -0400227
228/* Physical Memory Map */
229#define CONFIG_NR_DRAM_BANKS 1
230#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
231
232#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
233#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
234#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
235
236#define CONFIG_SYS_INIT_SP_OFFSET \
237 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
238#define CONFIG_SYS_INIT_SP_ADDR \
239 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
240
241/* FLASH and environment organization */
Akshay Bhat9301aea2016-07-29 11:44:46 -0400242
243#define CONFIG_ENV_IS_IN_SPI_FLASH
244#define CONFIG_ENV_SIZE (8 * 1024)
245#define CONFIG_ENV_OFFSET (768 * 1024)
246#define CONFIG_ENV_SECT_SIZE (64 * 1024)
247#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
248#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
249#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
250#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
251
252#ifndef CONFIG_SYS_DCACHE_OFF
253#endif
254
255#define CONFIG_SYS_FSL_USDHC_NUM 3
256
257/* Framebuffer */
Yung-Ching LIN7bcb3892017-03-29 01:51:22 +0800258#ifdef CONFIG_VIDEO
Akshay Bhat9301aea2016-07-29 11:44:46 -0400259#define CONFIG_VIDEO_IPUV3
Akshay Bhat9301aea2016-07-29 11:44:46 -0400260#define CONFIG_VIDEO_BMP_RLE8
261#define CONFIG_SPLASH_SCREEN
262#define CONFIG_SPLASH_SCREEN_ALIGN
263#define CONFIG_BMP_16BPP
264#define CONFIG_VIDEO_LOGO
265#define CONFIG_VIDEO_BMP_LOGO
266#define CONFIG_IPUV3_CLK 260000000
267#define CONFIG_IMX_HDMI
268#define CONFIG_IMX_VIDEO_SKIP
Yung-Ching LIN7bcb3892017-03-29 01:51:22 +0800269#endif
Akshay Bhat9301aea2016-07-29 11:44:46 -0400270
271#define CONFIG_PWM_IMX
272#define CONFIG_IMX6_PWM_PER_CLK 66000000
273
274#undef CONFIG_CMD_PCI
275#ifdef CONFIG_CMD_PCI
Akshay Bhat9301aea2016-07-29 11:44:46 -0400276#define CONFIG_PCI_SCAN_SHOW
277#define CONFIG_PCIE_IMX
278#define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(7, 12)
279#define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(1, 5)
280#endif
281
282/* I2C Configs */
283#define CONFIG_SYS_I2C
284#define CONFIG_SYS_I2C_MXC
285#define CONFIG_SYS_I2C_SPEED 100000
286#define CONFIG_SYS_I2C_MXC_I2C1
287#define CONFIG_SYS_I2C_MXC_I2C2
288#define CONFIG_SYS_I2C_MXC_I2C3
289
290#endif /* __ADVANTECH_DMSBA16_CONFIG_H */