| Paul Burton | b62cd89 | 2013-11-08 11:18:58 +0000 | [diff] [blame] | 1 | MIPS Malta board |
| 2 | |
| 3 | How to flash using a MIPS Navigator Probe: |
| 4 | |
| 5 | - Ensure that your Malta has jumper JP1 fitted. Without this jumper you will |
| 6 | be unable to flash your Malta using a Navigator Probe. |
| 7 | |
| 8 | - Connect Navigator Console to your probe and Malta as usual. |
| 9 | |
| 10 | - Within Navigator Console run the following commands: |
| 11 | |
| James Hogan | 8cda1d4 | 2014-03-04 14:48:42 +0000 | [diff] [blame] | 12 | source /path/to/u-boot/board/imgtec/malta/flash-malta-boot.tcl |
| Paul Burton | b62cd89 | 2013-11-08 11:18:58 +0000 | [diff] [blame] | 13 | reset |
| 14 | flash-boot /path/to/u-boot/u-boot.bin |
| 15 | |
| Bin Meng | 7557405 | 2016-02-05 19:30:11 -0800 | [diff] [blame] | 16 | - You should now be able to reboot your Malta to a U-Boot shell. |