Tom Rini | 6bb92fc | 2024-05-20 09:54:58 -0600 | [diff] [blame^] | 1 | // SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
| 2 | /* |
| 3 | * Device Tree Source for the R-Car V4M Gray Hawk Single board |
| 4 | * |
| 5 | * Copyright (C) 2023 Renesas Electronics Corp. |
| 6 | * Copyright (C) 2024 Glider bv |
| 7 | */ |
| 8 | |
| 9 | /dts-v1/; |
| 10 | |
| 11 | #include <dt-bindings/gpio/gpio.h> |
| 12 | |
| 13 | #include "r8a779h0.dtsi" |
| 14 | |
| 15 | / { |
| 16 | model = "Renesas Gray Hawk Single board based on r8a779h0"; |
| 17 | compatible = "renesas,gray-hawk-single", "renesas,r8a779h0"; |
| 18 | |
| 19 | aliases { |
| 20 | serial0 = &hscif0; |
| 21 | ethernet0 = &avb0; |
| 22 | }; |
| 23 | |
| 24 | chosen { |
| 25 | bootargs = "ignore_loglevel"; |
| 26 | stdout-path = "serial0:921600n8"; |
| 27 | }; |
| 28 | |
| 29 | memory@48000000 { |
| 30 | device_type = "memory"; |
| 31 | /* first 128MB is reserved for secure area. */ |
| 32 | reg = <0x0 0x48000000 0x0 0x78000000>; |
| 33 | }; |
| 34 | |
| 35 | memory@480000000 { |
| 36 | device_type = "memory"; |
| 37 | reg = <0x4 0x80000000 0x1 0x80000000>; |
| 38 | }; |
| 39 | |
| 40 | reg_1p8v: regulator-1p8v { |
| 41 | compatible = "regulator-fixed"; |
| 42 | regulator-name = "fixed-1.8V"; |
| 43 | regulator-min-microvolt = <1800000>; |
| 44 | regulator-max-microvolt = <1800000>; |
| 45 | regulator-boot-on; |
| 46 | regulator-always-on; |
| 47 | }; |
| 48 | |
| 49 | reg_3p3v: regulator-3p3v { |
| 50 | compatible = "regulator-fixed"; |
| 51 | regulator-name = "fixed-3.3V"; |
| 52 | regulator-min-microvolt = <3300000>; |
| 53 | regulator-max-microvolt = <3300000>; |
| 54 | regulator-boot-on; |
| 55 | regulator-always-on; |
| 56 | }; |
| 57 | }; |
| 58 | |
| 59 | &avb0 { |
| 60 | pinctrl-0 = <&avb0_pins>; |
| 61 | pinctrl-names = "default"; |
| 62 | phy-handle = <&phy0>; |
| 63 | tx-internal-delay-ps = <2000>; |
| 64 | status = "okay"; |
| 65 | |
| 66 | phy0: ethernet-phy@0 { |
| 67 | compatible = "ethernet-phy-id0022.1622", |
| 68 | "ethernet-phy-ieee802.3-c22"; |
| 69 | rxc-skew-ps = <1500>; |
| 70 | reg = <0>; |
| 71 | interrupt-parent = <&gpio7>; |
| 72 | interrupts = <5 IRQ_TYPE_LEVEL_LOW>; |
| 73 | reset-gpios = <&gpio7 10 GPIO_ACTIVE_LOW>; |
| 74 | }; |
| 75 | }; |
| 76 | |
| 77 | &extal_clk { |
| 78 | clock-frequency = <16666666>; |
| 79 | }; |
| 80 | |
| 81 | &extalr_clk { |
| 82 | clock-frequency = <32768>; |
| 83 | }; |
| 84 | |
| 85 | &hscif0 { |
| 86 | pinctrl-0 = <&hscif0_pins>; |
| 87 | pinctrl-names = "default"; |
| 88 | |
| 89 | uart-has-rtscts; |
| 90 | status = "okay"; |
| 91 | }; |
| 92 | |
| 93 | &i2c0 { |
| 94 | pinctrl-0 = <&i2c0_pins>; |
| 95 | pinctrl-names = "default"; |
| 96 | |
| 97 | status = "okay"; |
| 98 | clock-frequency = <400000>; |
| 99 | |
| 100 | eeprom@50 { |
| 101 | compatible = "rohm,br24g01", "atmel,24c01"; |
| 102 | label = "cpu-board"; |
| 103 | reg = <0x50>; |
| 104 | pagesize = <8>; |
| 105 | }; |
| 106 | |
| 107 | eeprom@51 { |
| 108 | compatible = "rohm,br24g01", "atmel,24c01"; |
| 109 | label = "breakout-board"; |
| 110 | reg = <0x51>; |
| 111 | pagesize = <8>; |
| 112 | }; |
| 113 | |
| 114 | eeprom@52 { |
| 115 | compatible = "rohm,br24g01", "atmel,24c01"; |
| 116 | label = "csi-dsi-sub-board-id"; |
| 117 | reg = <0x52>; |
| 118 | pagesize = <8>; |
| 119 | }; |
| 120 | |
| 121 | eeprom@53 { |
| 122 | compatible = "rohm,br24g01", "atmel,24c01"; |
| 123 | label = "ethernet-sub-board-id"; |
| 124 | reg = <0x53>; |
| 125 | pagesize = <8>; |
| 126 | }; |
| 127 | }; |
| 128 | |
| 129 | &mmc0 { |
| 130 | pinctrl-0 = <&mmc_pins>; |
| 131 | pinctrl-1 = <&mmc_pins>; |
| 132 | pinctrl-names = "default", "state_uhs"; |
| 133 | |
| 134 | vmmc-supply = <®_3p3v>; |
| 135 | vqmmc-supply = <®_1p8v>; |
| 136 | mmc-hs200-1_8v; |
| 137 | mmc-hs400-1_8v; |
| 138 | bus-width = <8>; |
| 139 | no-sd; |
| 140 | no-sdio; |
| 141 | non-removable; |
| 142 | full-pwr-cycle-in-suspend; |
| 143 | status = "okay"; |
| 144 | }; |
| 145 | |
| 146 | &pfc { |
| 147 | pinctrl-0 = <&scif_clk_pins>; |
| 148 | pinctrl-names = "default"; |
| 149 | |
| 150 | avb0_pins: avb0 { |
| 151 | mux { |
| 152 | groups = "avb0_link", "avb0_mdio", "avb0_rgmii", |
| 153 | "avb0_txcrefclk"; |
| 154 | function = "avb0"; |
| 155 | }; |
| 156 | |
| 157 | pins_mdio { |
| 158 | groups = "avb0_mdio"; |
| 159 | drive-strength = <21>; |
| 160 | }; |
| 161 | |
| 162 | pins_mii { |
| 163 | groups = "avb0_rgmii"; |
| 164 | drive-strength = <21>; |
| 165 | }; |
| 166 | }; |
| 167 | |
| 168 | hscif0_pins: hscif0 { |
| 169 | groups = "hscif0_data", "hscif0_ctrl"; |
| 170 | function = "hscif0"; |
| 171 | }; |
| 172 | |
| 173 | i2c0_pins: i2c0 { |
| 174 | groups = "i2c0"; |
| 175 | function = "i2c0"; |
| 176 | }; |
| 177 | |
| 178 | mmc_pins: mmc { |
| 179 | groups = "mmc_data8", "mmc_ctrl", "mmc_ds"; |
| 180 | function = "mmc"; |
| 181 | power-source = <1800>; |
| 182 | }; |
| 183 | |
| 184 | qspi0_pins: qspi0 { |
| 185 | groups = "qspi0_ctrl", "qspi0_data4"; |
| 186 | function = "qspi0"; |
| 187 | }; |
| 188 | |
| 189 | scif_clk_pins: scif-clk { |
| 190 | groups = "scif_clk"; |
| 191 | function = "scif_clk"; |
| 192 | }; |
| 193 | }; |
| 194 | |
| 195 | &rpc { |
| 196 | pinctrl-0 = <&qspi0_pins>; |
| 197 | pinctrl-names = "default"; |
| 198 | |
| 199 | status = "okay"; |
| 200 | |
| 201 | flash@0 { |
| 202 | compatible = "spansion,s25fs512s", "jedec,spi-nor"; |
| 203 | reg = <0>; |
| 204 | spi-max-frequency = <40000000>; |
| 205 | spi-rx-bus-width = <4>; |
| 206 | |
| 207 | partitions { |
| 208 | compatible = "fixed-partitions"; |
| 209 | #address-cells = <1>; |
| 210 | #size-cells = <1>; |
| 211 | |
| 212 | boot@0 { |
| 213 | reg = <0x0 0x1200000>; |
| 214 | read-only; |
| 215 | }; |
| 216 | user@1200000 { |
| 217 | reg = <0x1200000 0x2e00000>; |
| 218 | }; |
| 219 | }; |
| 220 | }; |
| 221 | }; |
| 222 | |
| 223 | &rwdt { |
| 224 | timeout-sec = <60>; |
| 225 | status = "okay"; |
| 226 | }; |
| 227 | |
| 228 | &scif_clk { |
| 229 | clock-frequency = <24000000>; |
| 230 | }; |