Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 1 | // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 | /* |
| 3 | * Copyright (C) 2016 Marvell Technology Group Ltd. |
| 4 | * |
| 5 | * Device Tree file for Marvell Armada CP11x. |
| 6 | */ |
| 7 | |
| 8 | #include <dt-bindings/interrupt-controller/mvebu-icu.h> |
| 9 | #include <dt-bindings/thermal/thermal.h> |
| 10 | |
| 11 | #include "armada-common.dtsi" |
| 12 | |
| 13 | #define CP11X_PCIEx_CONF_BASE(iface) (CP11X_PCIEx_MEM_BASE(iface) + CP11X_PCIEx_MEM_SIZE(iface)) |
| 14 | |
| 15 | / { |
| 16 | /* |
| 17 | * The contents of the node are defined below, in order to |
| 18 | * save one indentation level |
| 19 | */ |
| 20 | CP11X_NAME: CP11X_NAME { }; |
| 21 | |
| 22 | /* |
| 23 | * CPs only have one sensor in the thermal IC. |
| 24 | * |
| 25 | * The cooling maps are empty as there are no cooling devices. |
| 26 | */ |
| 27 | thermal-zones { |
| 28 | CP11X_LABEL(thermal_ic): CP11X_NODE_NAME(ic-thermal) { |
| 29 | polling-delay-passive = <0>; /* Interrupt driven */ |
| 30 | polling-delay = <0>; /* Interrupt driven */ |
| 31 | |
| 32 | thermal-sensors = <&CP11X_LABEL(thermal) 0>; |
| 33 | |
| 34 | trips { |
| 35 | CP11X_LABEL(crit): crit { |
| 36 | temperature = <100000>; /* mC degrees */ |
| 37 | hysteresis = <2000>; /* mC degrees */ |
| 38 | type = "critical"; |
| 39 | }; |
| 40 | }; |
| 41 | |
| 42 | cooling-maps { }; |
| 43 | }; |
| 44 | }; |
| 45 | }; |
| 46 | |
| 47 | &CP11X_NAME { |
| 48 | #address-cells = <2>; |
| 49 | #size-cells = <2>; |
| 50 | compatible = "simple-bus"; |
| 51 | interrupt-parent = <&CP11X_LABEL(icu_nsr)>; |
| 52 | ranges; |
| 53 | |
| 54 | config-space@CP11X_BASE { |
| 55 | #address-cells = <1>; |
| 56 | #size-cells = <1>; |
| 57 | compatible = "simple-bus"; |
| 58 | ranges = <0x0 0x0 ADDRESSIFY(CP11X_BASE) 0x2000000>; |
| 59 | |
| 60 | CP11X_LABEL(ethernet): ethernet@0 { |
| 61 | #address-cells = <1>; |
| 62 | #size-cells = <0>; |
| 63 | compatible = "marvell,armada-7k-pp22"; |
| 64 | reg = <0x0 0x100000>, <0x129000 0xb000>, <0x220000 0x800>; |
| 65 | clocks = <&CP11X_LABEL(clk) 1 3>, <&CP11X_LABEL(clk) 1 9>, |
| 66 | <&CP11X_LABEL(clk) 1 5>, <&CP11X_LABEL(clk) 1 6>, |
| 67 | <&CP11X_LABEL(clk) 1 18>; |
| 68 | clock-names = "pp_clk", "gop_clk", |
| 69 | "mg_clk", "mg_core_clk", "axi_clk"; |
| 70 | marvell,system-controller = <&CP11X_LABEL(syscon0)>; |
| 71 | status = "disabled"; |
| 72 | dma-coherent; |
| 73 | |
| 74 | CP11X_LABEL(eth0): ethernet-port@0 { |
| 75 | interrupts = <39 IRQ_TYPE_LEVEL_HIGH>, |
| 76 | <43 IRQ_TYPE_LEVEL_HIGH>, |
| 77 | <47 IRQ_TYPE_LEVEL_HIGH>, |
| 78 | <51 IRQ_TYPE_LEVEL_HIGH>, |
| 79 | <55 IRQ_TYPE_LEVEL_HIGH>, |
| 80 | <59 IRQ_TYPE_LEVEL_HIGH>, |
| 81 | <63 IRQ_TYPE_LEVEL_HIGH>, |
| 82 | <67 IRQ_TYPE_LEVEL_HIGH>, |
| 83 | <71 IRQ_TYPE_LEVEL_HIGH>, |
| 84 | <129 IRQ_TYPE_LEVEL_HIGH>; |
| 85 | interrupt-names = "hif0", "hif1", "hif2", |
| 86 | "hif3", "hif4", "hif5", "hif6", "hif7", |
| 87 | "hif8", "link"; |
| 88 | reg = <0>; |
| 89 | port-id = <0>; /* For backward compatibility. */ |
| 90 | gop-port-id = <0>; |
| 91 | status = "disabled"; |
| 92 | }; |
| 93 | |
| 94 | CP11X_LABEL(eth1): ethernet-port@1 { |
| 95 | interrupts = <40 IRQ_TYPE_LEVEL_HIGH>, |
| 96 | <44 IRQ_TYPE_LEVEL_HIGH>, |
| 97 | <48 IRQ_TYPE_LEVEL_HIGH>, |
| 98 | <52 IRQ_TYPE_LEVEL_HIGH>, |
| 99 | <56 IRQ_TYPE_LEVEL_HIGH>, |
| 100 | <60 IRQ_TYPE_LEVEL_HIGH>, |
| 101 | <64 IRQ_TYPE_LEVEL_HIGH>, |
| 102 | <68 IRQ_TYPE_LEVEL_HIGH>, |
| 103 | <72 IRQ_TYPE_LEVEL_HIGH>, |
| 104 | <128 IRQ_TYPE_LEVEL_HIGH>; |
| 105 | interrupt-names = "hif0", "hif1", "hif2", |
| 106 | "hif3", "hif4", "hif5", "hif6", "hif7", |
| 107 | "hif8", "link"; |
| 108 | reg = <1>; |
| 109 | port-id = <1>; /* For backward compatibility. */ |
| 110 | gop-port-id = <2>; |
| 111 | status = "disabled"; |
| 112 | }; |
| 113 | |
| 114 | CP11X_LABEL(eth2): ethernet-port@2 { |
| 115 | interrupts = <41 IRQ_TYPE_LEVEL_HIGH>, |
| 116 | <45 IRQ_TYPE_LEVEL_HIGH>, |
| 117 | <49 IRQ_TYPE_LEVEL_HIGH>, |
| 118 | <53 IRQ_TYPE_LEVEL_HIGH>, |
| 119 | <57 IRQ_TYPE_LEVEL_HIGH>, |
| 120 | <61 IRQ_TYPE_LEVEL_HIGH>, |
| 121 | <65 IRQ_TYPE_LEVEL_HIGH>, |
| 122 | <69 IRQ_TYPE_LEVEL_HIGH>, |
| 123 | <73 IRQ_TYPE_LEVEL_HIGH>, |
| 124 | <127 IRQ_TYPE_LEVEL_HIGH>; |
| 125 | interrupt-names = "hif0", "hif1", "hif2", |
| 126 | "hif3", "hif4", "hif5", "hif6", "hif7", |
| 127 | "hif8", "link"; |
| 128 | reg = <2>; |
| 129 | port-id = <2>; /* For backward compatibility. */ |
| 130 | gop-port-id = <3>; |
| 131 | status = "disabled"; |
| 132 | }; |
| 133 | }; |
| 134 | |
| 135 | CP11X_LABEL(comphy): phy@120000 { |
| 136 | compatible = "marvell,comphy-cp110"; |
| 137 | reg = <0x120000 0x6000>; |
| 138 | marvell,system-controller = <&CP11X_LABEL(syscon0)>; |
| 139 | clocks = <&CP11X_LABEL(clk) 1 5>, <&CP11X_LABEL(clk) 1 6>, |
| 140 | <&CP11X_LABEL(clk) 1 18>; |
| 141 | clock-names = "mg_clk", "mg_core_clk", "axi_clk"; |
| 142 | #address-cells = <1>; |
| 143 | #size-cells = <0>; |
| 144 | |
| 145 | CP11X_LABEL(comphy0): phy@0 { |
| 146 | reg = <0>; |
| 147 | #phy-cells = <1>; |
| 148 | }; |
| 149 | |
| 150 | CP11X_LABEL(comphy1): phy@1 { |
| 151 | reg = <1>; |
| 152 | #phy-cells = <1>; |
| 153 | }; |
| 154 | |
| 155 | CP11X_LABEL(comphy2): phy@2 { |
| 156 | reg = <2>; |
| 157 | #phy-cells = <1>; |
| 158 | }; |
| 159 | |
| 160 | CP11X_LABEL(comphy3): phy@3 { |
| 161 | reg = <3>; |
| 162 | #phy-cells = <1>; |
| 163 | }; |
| 164 | |
| 165 | CP11X_LABEL(comphy4): phy@4 { |
| 166 | reg = <4>; |
| 167 | #phy-cells = <1>; |
| 168 | }; |
| 169 | |
| 170 | CP11X_LABEL(comphy5): phy@5 { |
| 171 | reg = <5>; |
| 172 | #phy-cells = <1>; |
| 173 | }; |
| 174 | }; |
| 175 | |
| 176 | CP11X_LABEL(mdio): mdio@12a200 { |
| 177 | #address-cells = <1>; |
| 178 | #size-cells = <0>; |
| 179 | compatible = "marvell,orion-mdio"; |
| 180 | reg = <0x12a200 0x10>; |
| 181 | clocks = <&CP11X_LABEL(clk) 1 9>, <&CP11X_LABEL(clk) 1 5>, |
| 182 | <&CP11X_LABEL(clk) 1 6>, <&CP11X_LABEL(clk) 1 18>; |
| 183 | status = "disabled"; |
| 184 | }; |
| 185 | |
| 186 | CP11X_LABEL(xmdio): mdio@12a600 { |
| 187 | #address-cells = <1>; |
| 188 | #size-cells = <0>; |
| 189 | compatible = "marvell,xmdio"; |
| 190 | reg = <0x12a600 0x10>; |
| 191 | clocks = <&CP11X_LABEL(clk) 1 5>, |
| 192 | <&CP11X_LABEL(clk) 1 6>, <&CP11X_LABEL(clk) 1 18>; |
| 193 | status = "disabled"; |
| 194 | }; |
| 195 | |
| 196 | CP11X_LABEL(icu): interrupt-controller@1e0000 { |
| 197 | compatible = "marvell,cp110-icu"; |
| 198 | reg = <0x1e0000 0x440>; |
| 199 | #address-cells = <1>; |
| 200 | #size-cells = <1>; |
| 201 | |
| 202 | CP11X_LABEL(icu_nsr): interrupt-controller@10 { |
| 203 | compatible = "marvell,cp110-icu-nsr"; |
| 204 | reg = <0x10 0x20>; |
| 205 | #interrupt-cells = <2>; |
| 206 | interrupt-controller; |
| 207 | msi-parent = <&gicp>; |
| 208 | }; |
| 209 | |
| 210 | CP11X_LABEL(icu_sei): interrupt-controller@50 { |
| 211 | compatible = "marvell,cp110-icu-sei"; |
| 212 | reg = <0x50 0x10>; |
| 213 | #interrupt-cells = <2>; |
| 214 | interrupt-controller; |
| 215 | msi-parent = <&sei>; |
| 216 | }; |
| 217 | }; |
| 218 | |
| 219 | CP11X_LABEL(rtc): rtc@284000 { |
| 220 | compatible = "marvell,armada-8k-rtc"; |
| 221 | reg = <0x284000 0x20>, <0x284080 0x24>; |
| 222 | reg-names = "rtc", "rtc-soc"; |
| 223 | interrupts = <77 IRQ_TYPE_LEVEL_HIGH>; |
| 224 | }; |
| 225 | |
| 226 | CP11X_LABEL(syscon0): system-controller@440000 { |
| 227 | compatible = "syscon", "simple-mfd"; |
| 228 | reg = <0x440000 0x2000>; |
| 229 | |
| 230 | CP11X_LABEL(clk): clock { |
| 231 | compatible = "marvell,cp110-clock"; |
| 232 | #clock-cells = <2>; |
| 233 | }; |
| 234 | |
| 235 | CP11X_LABEL(gpio1): gpio@100 { |
| 236 | compatible = "marvell,armada-8k-gpio"; |
| 237 | offset = <0x100>; |
| 238 | ngpios = <32>; |
| 239 | gpio-controller; |
| 240 | #gpio-cells = <2>; |
| 241 | gpio-ranges = <&CP11X_LABEL(pinctrl) 0 0 32>; |
| 242 | marvell,pwm-offset = <0x1f0>; |
| 243 | #pwm-cells = <2>; |
| 244 | interrupt-controller; |
| 245 | interrupts = <86 IRQ_TYPE_LEVEL_HIGH>, |
| 246 | <85 IRQ_TYPE_LEVEL_HIGH>, |
| 247 | <84 IRQ_TYPE_LEVEL_HIGH>, |
| 248 | <83 IRQ_TYPE_LEVEL_HIGH>; |
| 249 | #interrupt-cells = <2>; |
| 250 | clock-names = "core", "axi"; |
| 251 | clocks = <&CP11X_LABEL(clk) 1 21>, |
| 252 | <&CP11X_LABEL(clk) 1 17>; |
| 253 | status = "disabled"; |
| 254 | }; |
| 255 | |
| 256 | CP11X_LABEL(gpio2): gpio@140 { |
| 257 | compatible = "marvell,armada-8k-gpio"; |
| 258 | offset = <0x140>; |
| 259 | ngpios = <31>; |
| 260 | gpio-controller; |
| 261 | #gpio-cells = <2>; |
| 262 | gpio-ranges = <&CP11X_LABEL(pinctrl) 0 32 31>; |
| 263 | marvell,pwm-offset = <0x1f0>; |
| 264 | #pwm-cells = <2>; |
| 265 | interrupt-controller; |
| 266 | interrupts = <82 IRQ_TYPE_LEVEL_HIGH>, |
| 267 | <81 IRQ_TYPE_LEVEL_HIGH>, |
| 268 | <80 IRQ_TYPE_LEVEL_HIGH>, |
| 269 | <79 IRQ_TYPE_LEVEL_HIGH>; |
| 270 | #interrupt-cells = <2>; |
| 271 | clock-names = "core", "axi"; |
| 272 | clocks = <&CP11X_LABEL(clk) 1 21>, |
| 273 | <&CP11X_LABEL(clk) 1 17>; |
| 274 | status = "disabled"; |
| 275 | }; |
| 276 | }; |
| 277 | |
| 278 | CP11X_LABEL(syscon1): system-controller@400000 { |
| 279 | compatible = "syscon", "simple-mfd"; |
| 280 | reg = <0x400000 0x1000>; |
| 281 | #address-cells = <1>; |
| 282 | #size-cells = <1>; |
| 283 | |
| 284 | CP11X_LABEL(thermal): thermal-sensor@70 { |
| 285 | compatible = "marvell,armada-cp110-thermal"; |
| 286 | reg = <0x70 0x10>; |
| 287 | interrupts-extended = |
| 288 | <&CP11X_LABEL(icu_sei) 116 IRQ_TYPE_LEVEL_HIGH>; |
| 289 | #thermal-sensor-cells = <1>; |
| 290 | }; |
| 291 | }; |
| 292 | |
| 293 | CP11X_LABEL(utmi): utmi@580000 { |
| 294 | compatible = "marvell,cp110-utmi-phy"; |
| 295 | reg = <0x580000 0x2000>; |
| 296 | marvell,system-controller = <&CP11X_LABEL(syscon0)>; |
| 297 | #address-cells = <1>; |
| 298 | #size-cells = <0>; |
| 299 | status = "disabled"; |
| 300 | |
| 301 | CP11X_LABEL(utmi0): usb-phy@0 { |
| 302 | reg = <0>; |
| 303 | #phy-cells = <0>; |
| 304 | }; |
| 305 | |
| 306 | CP11X_LABEL(utmi1): usb-phy@1 { |
| 307 | reg = <1>; |
| 308 | #phy-cells = <0>; |
| 309 | }; |
| 310 | }; |
| 311 | |
| 312 | CP11X_LABEL(usb3_0): usb@500000 { |
| 313 | compatible = "marvell,armada-8k-xhci", |
| 314 | "generic-xhci"; |
| 315 | reg = <0x500000 0x4000>; |
| 316 | dma-coherent; |
| 317 | interrupts = <106 IRQ_TYPE_LEVEL_HIGH>; |
| 318 | clock-names = "core", "reg"; |
| 319 | clocks = <&CP11X_LABEL(clk) 1 22>, |
| 320 | <&CP11X_LABEL(clk) 1 16>; |
| 321 | status = "disabled"; |
| 322 | }; |
| 323 | |
| 324 | CP11X_LABEL(usb3_1): usb@510000 { |
| 325 | compatible = "marvell,armada-8k-xhci", |
| 326 | "generic-xhci"; |
| 327 | reg = <0x510000 0x4000>; |
| 328 | dma-coherent; |
| 329 | interrupts = <105 IRQ_TYPE_LEVEL_HIGH>; |
| 330 | clock-names = "core", "reg"; |
| 331 | clocks = <&CP11X_LABEL(clk) 1 23>, |
| 332 | <&CP11X_LABEL(clk) 1 16>; |
| 333 | status = "disabled"; |
| 334 | }; |
| 335 | |
| 336 | CP11X_LABEL(sata0): sata@540000 { |
| 337 | compatible = "marvell,armada-8k-ahci", |
| 338 | "generic-ahci"; |
| 339 | reg = <0x540000 0x30000>; |
| 340 | dma-coherent; |
| 341 | interrupts = <107 IRQ_TYPE_LEVEL_HIGH>; |
| 342 | clocks = <&CP11X_LABEL(clk) 1 15>, |
| 343 | <&CP11X_LABEL(clk) 1 16>; |
| 344 | #address-cells = <1>; |
| 345 | #size-cells = <0>; |
| 346 | status = "disabled"; |
| 347 | |
| 348 | sata-port@0 { |
| 349 | reg = <0>; |
| 350 | }; |
| 351 | |
| 352 | sata-port@1 { |
| 353 | reg = <1>; |
| 354 | }; |
| 355 | }; |
| 356 | |
| 357 | CP11X_LABEL(xor0): xor@6a0000 { |
| 358 | compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; |
| 359 | reg = <0x6a0000 0x1000>, <0x6b0000 0x1000>; |
| 360 | dma-coherent; |
| 361 | msi-parent = <&gic_v2m0>; |
| 362 | clock-names = "core", "reg"; |
| 363 | clocks = <&CP11X_LABEL(clk) 1 8>, |
| 364 | <&CP11X_LABEL(clk) 1 14>; |
| 365 | }; |
| 366 | |
| 367 | CP11X_LABEL(xor1): xor@6c0000 { |
| 368 | compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; |
| 369 | reg = <0x6c0000 0x1000>, <0x6d0000 0x1000>; |
| 370 | dma-coherent; |
| 371 | msi-parent = <&gic_v2m0>; |
| 372 | clock-names = "core", "reg"; |
| 373 | clocks = <&CP11X_LABEL(clk) 1 7>, |
| 374 | <&CP11X_LABEL(clk) 1 14>; |
| 375 | }; |
| 376 | |
| 377 | CP11X_LABEL(spi0): spi@700600 { |
| 378 | compatible = "marvell,armada-380-spi"; |
| 379 | reg = <0x700600 0x50>; |
| 380 | #address-cells = <0x1>; |
| 381 | #size-cells = <0x0>; |
| 382 | clock-names = "core", "axi"; |
| 383 | clocks = <&CP11X_LABEL(clk) 1 21>, |
| 384 | <&CP11X_LABEL(clk) 1 17>; |
| 385 | status = "disabled"; |
| 386 | }; |
| 387 | |
| 388 | CP11X_LABEL(spi1): spi@700680 { |
| 389 | compatible = "marvell,armada-380-spi"; |
| 390 | reg = <0x700680 0x50>; |
| 391 | #address-cells = <1>; |
| 392 | #size-cells = <0>; |
| 393 | clock-names = "core", "axi"; |
| 394 | clocks = <&CP11X_LABEL(clk) 1 21>, |
| 395 | <&CP11X_LABEL(clk) 1 17>; |
| 396 | status = "disabled"; |
| 397 | }; |
| 398 | |
| 399 | CP11X_LABEL(i2c0): i2c@701000 { |
| 400 | compatible = "marvell,mv78230-i2c"; |
| 401 | reg = <0x701000 0x20>; |
| 402 | #address-cells = <1>; |
| 403 | #size-cells = <0>; |
| 404 | interrupts = <120 IRQ_TYPE_LEVEL_HIGH>; |
| 405 | clock-names = "core", "reg"; |
| 406 | clocks = <&CP11X_LABEL(clk) 1 21>, |
| 407 | <&CP11X_LABEL(clk) 1 17>; |
| 408 | status = "disabled"; |
| 409 | }; |
| 410 | |
| 411 | CP11X_LABEL(i2c1): i2c@701100 { |
| 412 | compatible = "marvell,mv78230-i2c"; |
| 413 | reg = <0x701100 0x20>; |
| 414 | #address-cells = <1>; |
| 415 | #size-cells = <0>; |
| 416 | interrupts = <121 IRQ_TYPE_LEVEL_HIGH>; |
| 417 | clock-names = "core", "reg"; |
| 418 | clocks = <&CP11X_LABEL(clk) 1 21>, |
| 419 | <&CP11X_LABEL(clk) 1 17>; |
| 420 | status = "disabled"; |
| 421 | }; |
| 422 | |
| 423 | CP11X_LABEL(uart0): serial@702000 { |
| 424 | compatible = "snps,dw-apb-uart"; |
| 425 | reg = <0x702000 0x100>; |
| 426 | reg-shift = <2>; |
| 427 | interrupts = <122 IRQ_TYPE_LEVEL_HIGH>; |
| 428 | reg-io-width = <1>; |
| 429 | clock-names = "baudclk", "apb_pclk"; |
| 430 | clocks = <&CP11X_LABEL(clk) 1 21>, |
| 431 | <&CP11X_LABEL(clk) 1 17>; |
| 432 | status = "disabled"; |
| 433 | }; |
| 434 | |
| 435 | CP11X_LABEL(uart1): serial@702100 { |
| 436 | compatible = "snps,dw-apb-uart"; |
| 437 | reg = <0x702100 0x100>; |
| 438 | reg-shift = <2>; |
| 439 | interrupts = <123 IRQ_TYPE_LEVEL_HIGH>; |
| 440 | reg-io-width = <1>; |
| 441 | clock-names = "baudclk", "apb_pclk"; |
| 442 | clocks = <&CP11X_LABEL(clk) 1 21>, |
| 443 | <&CP11X_LABEL(clk) 1 17>; |
| 444 | status = "disabled"; |
| 445 | }; |
| 446 | |
| 447 | CP11X_LABEL(uart2): serial@702200 { |
| 448 | compatible = "snps,dw-apb-uart"; |
| 449 | reg = <0x702200 0x100>; |
| 450 | reg-shift = <2>; |
| 451 | interrupts = <124 IRQ_TYPE_LEVEL_HIGH>; |
| 452 | reg-io-width = <1>; |
| 453 | clock-names = "baudclk", "apb_pclk"; |
| 454 | clocks = <&CP11X_LABEL(clk) 1 21>, |
| 455 | <&CP11X_LABEL(clk) 1 17>; |
| 456 | status = "disabled"; |
| 457 | }; |
| 458 | |
| 459 | CP11X_LABEL(uart3): serial@702300 { |
| 460 | compatible = "snps,dw-apb-uart"; |
| 461 | reg = <0x702300 0x100>; |
| 462 | reg-shift = <2>; |
| 463 | interrupts = <125 IRQ_TYPE_LEVEL_HIGH>; |
| 464 | reg-io-width = <1>; |
| 465 | clock-names = "baudclk", "apb_pclk"; |
| 466 | clocks = <&CP11X_LABEL(clk) 1 21>, |
| 467 | <&CP11X_LABEL(clk) 1 17>; |
| 468 | status = "disabled"; |
| 469 | }; |
| 470 | |
| 471 | CP11X_LABEL(nand_controller): nand-controller@720000 { |
| 472 | /* |
| 473 | * Due to the limitation of the pins available |
| 474 | * this controller is only usable on the CPM |
| 475 | * for A7K and on the CPS for A8K. |
| 476 | */ |
| 477 | compatible = "marvell,armada-8k-nand-controller", |
| 478 | "marvell,armada370-nand-controller"; |
| 479 | reg = <0x720000 0x54>; |
| 480 | #address-cells = <1>; |
| 481 | #size-cells = <0>; |
| 482 | interrupts = <115 IRQ_TYPE_LEVEL_HIGH>; |
| 483 | clock-names = "core", "reg"; |
| 484 | clocks = <&CP11X_LABEL(clk) 1 2>, |
| 485 | <&CP11X_LABEL(clk) 1 17>; |
| 486 | marvell,system-controller = <&CP11X_LABEL(syscon0)>; |
| 487 | status = "disabled"; |
| 488 | }; |
| 489 | |
| 490 | CP11X_LABEL(trng): trng@760000 { |
| 491 | compatible = "marvell,armada-8k-rng", |
| 492 | "inside-secure,safexcel-eip76"; |
| 493 | reg = <0x760000 0x7d>; |
| 494 | interrupts = <95 IRQ_TYPE_LEVEL_HIGH>; |
| 495 | clock-names = "core", "reg"; |
| 496 | clocks = <&CP11X_LABEL(clk) 1 25>, |
| 497 | <&CP11X_LABEL(clk) 1 17>; |
| 498 | status = "okay"; |
| 499 | }; |
| 500 | |
| 501 | CP11X_LABEL(sdhci0): mmc@780000 { |
| 502 | compatible = "marvell,armada-cp110-sdhci"; |
| 503 | reg = <0x780000 0x300>; |
| 504 | interrupts = <27 IRQ_TYPE_LEVEL_HIGH>; |
| 505 | clock-names = "core", "axi"; |
| 506 | clocks = <&CP11X_LABEL(clk) 1 4>, <&CP11X_LABEL(clk) 1 18>; |
| 507 | dma-coherent; |
| 508 | status = "disabled"; |
| 509 | }; |
| 510 | |
| 511 | CP11X_LABEL(crypto): crypto@800000 { |
| 512 | compatible = "inside-secure,safexcel-eip197b"; |
| 513 | reg = <0x800000 0x200000>; |
Tom Rini | 6bb92fc | 2024-05-20 09:54:58 -0600 | [diff] [blame^] | 514 | interrupts = <88 IRQ_TYPE_LEVEL_HIGH>, |
Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 515 | <89 IRQ_TYPE_LEVEL_HIGH>, |
| 516 | <90 IRQ_TYPE_LEVEL_HIGH>, |
| 517 | <91 IRQ_TYPE_LEVEL_HIGH>, |
Tom Rini | 6bb92fc | 2024-05-20 09:54:58 -0600 | [diff] [blame^] | 518 | <92 IRQ_TYPE_LEVEL_HIGH>, |
| 519 | <87 IRQ_TYPE_LEVEL_HIGH>; |
| 520 | interrupt-names = "ring0", "ring1", "ring2", "ring3", |
| 521 | "eip", "mem"; |
Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 522 | clock-names = "core", "reg"; |
| 523 | clocks = <&CP11X_LABEL(clk) 1 26>, |
| 524 | <&CP11X_LABEL(clk) 1 17>; |
| 525 | dma-coherent; |
| 526 | }; |
| 527 | }; |
| 528 | |
| 529 | CP11X_LABEL(pcie0): pcie@CP11X_PCIE0_BASE { |
| 530 | compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; |
| 531 | reg = <0 ADDRESSIFY(CP11X_PCIE0_BASE) 0 0x10000>, |
| 532 | <0 CP11X_PCIEx_CONF_BASE(0) 0 0x80000>; |
| 533 | reg-names = "ctrl", "config"; |
| 534 | #address-cells = <3>; |
| 535 | #size-cells = <2>; |
| 536 | #interrupt-cells = <1>; |
| 537 | device_type = "pci"; |
| 538 | dma-coherent; |
| 539 | msi-parent = <&gic_v2m0>; |
| 540 | |
| 541 | bus-range = <0 0xff>; |
| 542 | /* non-prefetchable memory */ |
| 543 | ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(0) 0 CP11X_PCIEx_MEM_BASE(0) 0 CP11X_PCIEx_MEM_SIZE(0)>; |
| 544 | interrupt-map-mask = <0 0 0 0>; |
| 545 | interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 22 IRQ_TYPE_LEVEL_HIGH>; |
| 546 | interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; |
| 547 | num-lanes = <1>; |
| 548 | clock-names = "core", "reg"; |
| 549 | clocks = <&CP11X_LABEL(clk) 1 13>, <&CP11X_LABEL(clk) 1 14>; |
| 550 | status = "disabled"; |
| 551 | }; |
| 552 | |
| 553 | CP11X_LABEL(pcie1): pcie@CP11X_PCIE1_BASE { |
| 554 | compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; |
| 555 | reg = <0 ADDRESSIFY(CP11X_PCIE1_BASE) 0 0x10000>, |
| 556 | <0 CP11X_PCIEx_CONF_BASE(1) 0 0x80000>; |
| 557 | reg-names = "ctrl", "config"; |
| 558 | #address-cells = <3>; |
| 559 | #size-cells = <2>; |
| 560 | #interrupt-cells = <1>; |
| 561 | device_type = "pci"; |
| 562 | dma-coherent; |
| 563 | msi-parent = <&gic_v2m0>; |
| 564 | |
| 565 | bus-range = <0 0xff>; |
| 566 | /* non-prefetchable memory */ |
| 567 | ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(1) 0 CP11X_PCIEx_MEM_BASE(1) 0 CP11X_PCIEx_MEM_SIZE(1)>; |
| 568 | interrupt-map-mask = <0 0 0 0>; |
| 569 | interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 24 IRQ_TYPE_LEVEL_HIGH>; |
| 570 | interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; |
| 571 | |
| 572 | num-lanes = <1>; |
| 573 | clock-names = "core", "reg"; |
| 574 | clocks = <&CP11X_LABEL(clk) 1 11>, <&CP11X_LABEL(clk) 1 14>; |
| 575 | status = "disabled"; |
| 576 | }; |
| 577 | |
| 578 | CP11X_LABEL(pcie2): pcie@CP11X_PCIE2_BASE { |
| 579 | compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; |
| 580 | reg = <0 ADDRESSIFY(CP11X_PCIE2_BASE) 0 0x10000>, |
| 581 | <0 CP11X_PCIEx_CONF_BASE(2) 0 0x80000>; |
| 582 | reg-names = "ctrl", "config"; |
| 583 | #address-cells = <3>; |
| 584 | #size-cells = <2>; |
| 585 | #interrupt-cells = <1>; |
| 586 | device_type = "pci"; |
| 587 | dma-coherent; |
| 588 | msi-parent = <&gic_v2m0>; |
| 589 | |
| 590 | bus-range = <0 0xff>; |
| 591 | /* non-prefetchable memory */ |
| 592 | ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(2) 0 CP11X_PCIEx_MEM_BASE(2) 0 CP11X_PCIEx_MEM_SIZE(2)>; |
| 593 | interrupt-map-mask = <0 0 0 0>; |
| 594 | interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 23 IRQ_TYPE_LEVEL_HIGH>; |
| 595 | interrupts = <23 IRQ_TYPE_LEVEL_HIGH>; |
| 596 | |
| 597 | num-lanes = <1>; |
| 598 | clock-names = "core", "reg"; |
| 599 | clocks = <&CP11X_LABEL(clk) 1 12>, <&CP11X_LABEL(clk) 1 14>; |
| 600 | status = "disabled"; |
| 601 | }; |
| 602 | }; |