Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0 |
| 2 | /* |
| 3 | * Samsung Exynos5250 SoC device tree source |
| 4 | * |
| 5 | * Copyright (c) 2012 Samsung Electronics Co., Ltd. |
| 6 | * http://www.samsung.com |
| 7 | * |
| 8 | * Samsung Exynos5250 SoC device nodes are listed in this file. |
| 9 | * Exynos5250 based board files can include this file and provide |
| 10 | * values for board specific bindings. |
| 11 | * |
| 12 | * Note: This file does not include device nodes for all the controllers in |
| 13 | * Exynos5250 SoC. As device tree coverage for Exynos5250 increases, |
| 14 | * additional nodes can be added to this file. |
| 15 | */ |
| 16 | |
| 17 | #include <dt-bindings/clock/exynos5250.h> |
| 18 | #include "exynos5.dtsi" |
| 19 | #include "exynos4-cpu-thermal.dtsi" |
| 20 | #include <dt-bindings/clock/exynos-audss-clk.h> |
| 21 | |
| 22 | / { |
| 23 | compatible = "samsung,exynos5250", "samsung,exynos5"; |
| 24 | |
| 25 | aliases { |
| 26 | spi0 = &spi_0; |
| 27 | spi1 = &spi_1; |
| 28 | spi2 = &spi_2; |
| 29 | gsc0 = &gsc_0; |
| 30 | gsc1 = &gsc_1; |
| 31 | gsc2 = &gsc_2; |
| 32 | gsc3 = &gsc_3; |
| 33 | i2c4 = &i2c_4; |
| 34 | i2c5 = &i2c_5; |
| 35 | i2c6 = &i2c_6; |
| 36 | i2c7 = &i2c_7; |
| 37 | i2c8 = &i2c_8; |
| 38 | i2c9 = &i2c_9; |
| 39 | pinctrl0 = &pinctrl_0; |
| 40 | pinctrl1 = &pinctrl_1; |
| 41 | pinctrl2 = &pinctrl_2; |
| 42 | pinctrl3 = &pinctrl_3; |
| 43 | }; |
| 44 | |
| 45 | cpus { |
| 46 | #address-cells = <1>; |
| 47 | #size-cells = <0>; |
| 48 | |
| 49 | cpu-map { |
| 50 | cluster0 { |
| 51 | core0 { |
| 52 | cpu = <&cpu0>; |
| 53 | }; |
| 54 | core1 { |
| 55 | cpu = <&cpu1>; |
| 56 | }; |
| 57 | }; |
| 58 | }; |
| 59 | |
| 60 | cpu0: cpu@0 { |
| 61 | device_type = "cpu"; |
| 62 | compatible = "arm,cortex-a15"; |
| 63 | reg = <0>; |
| 64 | clocks = <&clock CLK_ARM_CLK>; |
| 65 | clock-names = "cpu"; |
| 66 | operating-points-v2 = <&cpu0_opp_table>; |
| 67 | #cooling-cells = <2>; /* min followed by max */ |
| 68 | }; |
| 69 | cpu1: cpu@1 { |
| 70 | device_type = "cpu"; |
| 71 | compatible = "arm,cortex-a15"; |
| 72 | reg = <1>; |
| 73 | clocks = <&clock CLK_ARM_CLK>; |
| 74 | clock-names = "cpu"; |
| 75 | operating-points-v2 = <&cpu0_opp_table>; |
| 76 | #cooling-cells = <2>; /* min followed by max */ |
| 77 | }; |
| 78 | }; |
| 79 | |
| 80 | cpu0_opp_table: opp-table-0 { |
| 81 | compatible = "operating-points-v2"; |
| 82 | opp-shared; |
| 83 | |
| 84 | opp-200000000 { |
| 85 | opp-hz = /bits/ 64 <200000000>; |
| 86 | opp-microvolt = <925000>; |
| 87 | clock-latency-ns = <140000>; |
| 88 | }; |
| 89 | opp-300000000 { |
| 90 | opp-hz = /bits/ 64 <300000000>; |
| 91 | opp-microvolt = <937500>; |
| 92 | clock-latency-ns = <140000>; |
| 93 | }; |
| 94 | opp-400000000 { |
| 95 | opp-hz = /bits/ 64 <400000000>; |
| 96 | opp-microvolt = <950000>; |
| 97 | clock-latency-ns = <140000>; |
| 98 | }; |
| 99 | opp-500000000 { |
| 100 | opp-hz = /bits/ 64 <500000000>; |
| 101 | opp-microvolt = <975000>; |
| 102 | clock-latency-ns = <140000>; |
| 103 | }; |
| 104 | opp-600000000 { |
| 105 | opp-hz = /bits/ 64 <600000000>; |
| 106 | opp-microvolt = <1000000>; |
| 107 | clock-latency-ns = <140000>; |
| 108 | }; |
| 109 | opp-700000000 { |
| 110 | opp-hz = /bits/ 64 <700000000>; |
| 111 | opp-microvolt = <1012500>; |
| 112 | clock-latency-ns = <140000>; |
| 113 | }; |
| 114 | opp-800000000 { |
| 115 | opp-hz = /bits/ 64 <800000000>; |
| 116 | opp-microvolt = <1025000>; |
| 117 | clock-latency-ns = <140000>; |
| 118 | }; |
| 119 | opp-900000000 { |
| 120 | opp-hz = /bits/ 64 <900000000>; |
| 121 | opp-microvolt = <1050000>; |
| 122 | clock-latency-ns = <140000>; |
| 123 | }; |
| 124 | opp-1000000000 { |
| 125 | opp-hz = /bits/ 64 <1000000000>; |
| 126 | opp-microvolt = <1075000>; |
| 127 | clock-latency-ns = <140000>; |
| 128 | opp-suspend; |
| 129 | }; |
| 130 | opp-1100000000 { |
| 131 | opp-hz = /bits/ 64 <1100000000>; |
| 132 | opp-microvolt = <1100000>; |
| 133 | clock-latency-ns = <140000>; |
| 134 | }; |
| 135 | opp-1200000000 { |
| 136 | opp-hz = /bits/ 64 <1200000000>; |
| 137 | opp-microvolt = <1125000>; |
| 138 | clock-latency-ns = <140000>; |
| 139 | }; |
| 140 | opp-1300000000 { |
| 141 | opp-hz = /bits/ 64 <1300000000>; |
| 142 | opp-microvolt = <1150000>; |
| 143 | clock-latency-ns = <140000>; |
| 144 | }; |
| 145 | opp-1400000000 { |
| 146 | opp-hz = /bits/ 64 <1400000000>; |
| 147 | opp-microvolt = <1200000>; |
| 148 | clock-latency-ns = <140000>; |
| 149 | }; |
| 150 | opp-1500000000 { |
| 151 | opp-hz = /bits/ 64 <1500000000>; |
| 152 | opp-microvolt = <1225000>; |
| 153 | clock-latency-ns = <140000>; |
| 154 | }; |
| 155 | opp-1600000000 { |
| 156 | opp-hz = /bits/ 64 <1600000000>; |
| 157 | opp-microvolt = <1250000>; |
| 158 | clock-latency-ns = <140000>; |
| 159 | }; |
| 160 | opp-1700000000 { |
| 161 | opp-hz = /bits/ 64 <1700000000>; |
| 162 | opp-microvolt = <1300000>; |
| 163 | clock-latency-ns = <140000>; |
| 164 | }; |
| 165 | }; |
| 166 | |
| 167 | pmu { |
| 168 | compatible = "arm,cortex-a15-pmu"; |
| 169 | interrupt-parent = <&combiner>; |
| 170 | interrupts = <1 2>, <22 4>; |
| 171 | }; |
| 172 | |
| 173 | soc: soc { |
| 174 | sram@2020000 { |
| 175 | compatible = "mmio-sram"; |
| 176 | reg = <0x02020000 0x30000>; |
| 177 | #address-cells = <1>; |
| 178 | #size-cells = <1>; |
| 179 | ranges = <0 0x02020000 0x30000>; |
| 180 | |
| 181 | smp-sram@0 { |
| 182 | compatible = "samsung,exynos4210-sysram"; |
| 183 | reg = <0x0 0x1000>; |
| 184 | }; |
| 185 | |
| 186 | smp-sram@2f000 { |
| 187 | compatible = "samsung,exynos4210-sysram-ns"; |
| 188 | reg = <0x2f000 0x1000>; |
| 189 | }; |
| 190 | }; |
| 191 | |
| 192 | pd_gsc: power-domain@10044000 { |
| 193 | compatible = "samsung,exynos4210-pd"; |
| 194 | reg = <0x10044000 0x20>; |
| 195 | #power-domain-cells = <0>; |
| 196 | label = "GSC"; |
| 197 | }; |
| 198 | |
| 199 | pd_mfc: power-domain@10044040 { |
| 200 | compatible = "samsung,exynos4210-pd"; |
| 201 | reg = <0x10044040 0x20>; |
| 202 | #power-domain-cells = <0>; |
| 203 | label = "MFC"; |
| 204 | }; |
| 205 | |
| 206 | pd_g3d: power-domain@10044060 { |
| 207 | compatible = "samsung,exynos4210-pd"; |
| 208 | reg = <0x10044060 0x20>; |
| 209 | #power-domain-cells = <0>; |
| 210 | label = "G3D"; |
| 211 | }; |
| 212 | |
| 213 | pd_disp1: power-domain@100440a0 { |
| 214 | compatible = "samsung,exynos4210-pd"; |
| 215 | reg = <0x100440a0 0x20>; |
| 216 | #power-domain-cells = <0>; |
| 217 | label = "DISP1"; |
| 218 | }; |
| 219 | |
| 220 | pd_mau: power-domain@100440c0 { |
| 221 | compatible = "samsung,exynos4210-pd"; |
| 222 | reg = <0x100440c0 0x20>; |
| 223 | #power-domain-cells = <0>; |
| 224 | label = "MAU"; |
| 225 | }; |
| 226 | |
| 227 | clock: clock-controller@10010000 { |
| 228 | compatible = "samsung,exynos5250-clock"; |
| 229 | reg = <0x10010000 0x30000>; |
| 230 | #clock-cells = <1>; |
| 231 | }; |
| 232 | |
| 233 | clock_audss: audss-clock-controller@3810000 { |
| 234 | compatible = "samsung,exynos5250-audss-clock"; |
| 235 | reg = <0x03810000 0x0c>; |
| 236 | #clock-cells = <1>; |
| 237 | clocks = <&clock CLK_FIN_PLL>, <&clock CLK_FOUT_EPLL>, |
| 238 | <&clock CLK_SCLK_AUDIO0>, <&clock CLK_DIV_PCM0>; |
| 239 | clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in"; |
| 240 | power-domains = <&pd_mau>; |
| 241 | }; |
| 242 | |
| 243 | timer@101c0000 { |
| 244 | compatible = "samsung,exynos5250-mct", |
| 245 | "samsung,exynos4210-mct"; |
| 246 | reg = <0x101c0000 0x800>; |
| 247 | clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>; |
| 248 | clock-names = "fin_pll", "mct"; |
| 249 | interrupts-extended = <&combiner 23 3>, |
| 250 | <&combiner 23 4>, |
| 251 | <&combiner 25 2>, |
| 252 | <&combiner 25 3>, |
| 253 | <&gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, |
| 254 | <&gic GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; |
| 255 | }; |
| 256 | |
| 257 | pinctrl_0: pinctrl@11400000 { |
| 258 | compatible = "samsung,exynos5250-pinctrl"; |
| 259 | reg = <0x11400000 0x1000>; |
| 260 | interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; |
| 261 | |
| 262 | wakup_eint: wakeup-interrupt-controller { |
| 263 | compatible = "samsung,exynos4210-wakeup-eint"; |
| 264 | interrupt-parent = <&gic>; |
| 265 | interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; |
| 266 | }; |
| 267 | }; |
| 268 | |
| 269 | pinctrl_1: pinctrl@13400000 { |
| 270 | compatible = "samsung,exynos5250-pinctrl"; |
| 271 | reg = <0x13400000 0x1000>; |
| 272 | interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; |
| 273 | }; |
| 274 | |
| 275 | pinctrl_2: pinctrl@10d10000 { |
| 276 | compatible = "samsung,exynos5250-pinctrl"; |
| 277 | reg = <0x10d10000 0x1000>; |
| 278 | interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; |
| 279 | }; |
| 280 | |
| 281 | pinctrl_3: pinctrl@3860000 { |
| 282 | compatible = "samsung,exynos5250-pinctrl"; |
| 283 | reg = <0x03860000 0x1000>; |
| 284 | interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; |
| 285 | power-domains = <&pd_mau>; |
| 286 | }; |
| 287 | |
| 288 | pmu_system_controller: system-controller@10040000 { |
| 289 | compatible = "samsung,exynos5250-pmu", "simple-mfd", "syscon"; |
| 290 | reg = <0x10040000 0x5000>; |
| 291 | clock-names = "clkout16"; |
| 292 | clocks = <&clock CLK_FIN_PLL>; |
| 293 | #clock-cells = <1>; |
| 294 | interrupt-controller; |
| 295 | #interrupt-cells = <3>; |
| 296 | interrupt-parent = <&gic>; |
| 297 | |
| 298 | dp_phy: dp-phy { |
| 299 | compatible = "samsung,exynos5250-dp-video-phy"; |
| 300 | #phy-cells = <0>; |
| 301 | }; |
| 302 | |
| 303 | mipi_phy: mipi-phy { |
| 304 | compatible = "samsung,s5pv210-mipi-video-phy"; |
| 305 | #phy-cells = <1>; |
| 306 | }; |
| 307 | }; |
| 308 | |
| 309 | watchdog@101d0000 { |
| 310 | compatible = "samsung,exynos5250-wdt"; |
| 311 | reg = <0x101d0000 0x100>; |
| 312 | interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; |
| 313 | clocks = <&clock CLK_WDT>; |
| 314 | clock-names = "watchdog"; |
| 315 | samsung,syscon-phandle = <&pmu_system_controller>; |
| 316 | }; |
| 317 | |
| 318 | mfc: codec@11000000 { |
| 319 | compatible = "samsung,mfc-v6"; |
| 320 | reg = <0x11000000 0x10000>; |
| 321 | interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; |
| 322 | power-domains = <&pd_mfc>; |
| 323 | clocks = <&clock CLK_MFC>; |
| 324 | clock-names = "mfc"; |
| 325 | iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>; |
| 326 | iommu-names = "left", "right"; |
| 327 | }; |
| 328 | |
| 329 | rotator: rotator@11c00000 { |
| 330 | compatible = "samsung,exynos5250-rotator"; |
| 331 | reg = <0x11c00000 0x64>; |
| 332 | interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; |
| 333 | clocks = <&clock CLK_ROTATOR>; |
| 334 | clock-names = "rotator"; |
| 335 | iommus = <&sysmmu_rotator>; |
| 336 | }; |
| 337 | |
| 338 | mali: gpu@11800000 { |
| 339 | compatible = "samsung,exynos5250-mali", "arm,mali-t604"; |
| 340 | reg = <0x11800000 0x5000>; |
| 341 | interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, |
| 342 | <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, |
| 343 | <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; |
| 344 | interrupt-names = "job", "mmu", "gpu"; |
| 345 | clocks = <&clock CLK_G3D>; |
| 346 | clock-names = "core"; |
| 347 | operating-points-v2 = <&gpu_opp_table>; |
| 348 | power-domains = <&pd_g3d>; |
| 349 | status = "disabled"; |
| 350 | |
| 351 | gpu_opp_table: opp-table { |
| 352 | compatible = "operating-points-v2"; |
| 353 | |
| 354 | opp-100000000 { |
| 355 | opp-hz = /bits/ 64 <100000000>; |
| 356 | opp-microvolt = <925000>; |
| 357 | }; |
| 358 | opp-160000000 { |
| 359 | opp-hz = /bits/ 64 <160000000>; |
| 360 | opp-microvolt = <925000>; |
| 361 | }; |
| 362 | opp-266000000 { |
| 363 | opp-hz = /bits/ 64 <266000000>; |
| 364 | opp-microvolt = <1025000>; |
| 365 | }; |
| 366 | opp-350000000 { |
| 367 | opp-hz = /bits/ 64 <350000000>; |
| 368 | opp-microvolt = <1075000>; |
| 369 | }; |
| 370 | opp-400000000 { |
| 371 | opp-hz = /bits/ 64 <400000000>; |
| 372 | opp-microvolt = <1125000>; |
| 373 | }; |
| 374 | opp-450000000 { |
| 375 | opp-hz = /bits/ 64 <450000000>; |
| 376 | opp-microvolt = <1150000>; |
| 377 | }; |
| 378 | opp-533000000 { |
| 379 | opp-hz = /bits/ 64 <533000000>; |
| 380 | opp-microvolt = <1250000>; |
| 381 | }; |
| 382 | }; |
| 383 | }; |
| 384 | |
| 385 | tmu: tmu@10060000 { |
| 386 | compatible = "samsung,exynos5250-tmu"; |
| 387 | reg = <0x10060000 0x100>; |
| 388 | interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; |
| 389 | clocks = <&clock CLK_TMU>; |
| 390 | clock-names = "tmu_apbif"; |
| 391 | #thermal-sensor-cells = <0>; |
| 392 | }; |
| 393 | |
| 394 | sata: sata@122f0000 { |
| 395 | compatible = "snps,dwc-ahci"; |
| 396 | reg = <0x122f0000 0x1ff>; |
| 397 | interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; |
| 398 | clocks = <&clock CLK_SATA>, <&clock CLK_SCLK_SATA>; |
| 399 | clock-names = "sata", "pclk"; |
| 400 | phys = <&sata_phy>; |
| 401 | phy-names = "sata-phy"; |
| 402 | ports-implemented = <0x1>; |
| 403 | status = "disabled"; |
| 404 | }; |
| 405 | |
| 406 | sata_phy: sata-phy@12170000 { |
| 407 | compatible = "samsung,exynos5250-sata-phy"; |
| 408 | reg = <0x12170000 0x1ff>; |
| 409 | clocks = <&clock CLK_SATA_PHYCTRL>; |
| 410 | clock-names = "sata_phyctrl"; |
| 411 | #phy-cells = <0>; |
| 412 | samsung,syscon-phandle = <&pmu_system_controller>; |
| 413 | status = "disabled"; |
| 414 | }; |
| 415 | |
| 416 | /* i2c_0-3 are defined in exynos5.dtsi */ |
| 417 | i2c_4: i2c@12ca0000 { |
| 418 | compatible = "samsung,s3c2440-i2c"; |
| 419 | reg = <0x12ca0000 0x100>; |
| 420 | interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; |
| 421 | #address-cells = <1>; |
| 422 | #size-cells = <0>; |
| 423 | clocks = <&clock CLK_I2C4>; |
| 424 | clock-names = "i2c"; |
| 425 | pinctrl-names = "default"; |
| 426 | pinctrl-0 = <&i2c4_bus>; |
| 427 | status = "disabled"; |
| 428 | }; |
| 429 | |
| 430 | i2c_5: i2c@12cb0000 { |
| 431 | compatible = "samsung,s3c2440-i2c"; |
| 432 | reg = <0x12cb0000 0x100>; |
| 433 | interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; |
| 434 | #address-cells = <1>; |
| 435 | #size-cells = <0>; |
| 436 | clocks = <&clock CLK_I2C5>; |
| 437 | clock-names = "i2c"; |
| 438 | pinctrl-names = "default"; |
| 439 | pinctrl-0 = <&i2c5_bus>; |
| 440 | status = "disabled"; |
| 441 | }; |
| 442 | |
| 443 | i2c_6: i2c@12cc0000 { |
| 444 | compatible = "samsung,s3c2440-i2c"; |
| 445 | reg = <0x12cc0000 0x100>; |
| 446 | interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; |
| 447 | #address-cells = <1>; |
| 448 | #size-cells = <0>; |
| 449 | clocks = <&clock CLK_I2C6>; |
| 450 | clock-names = "i2c"; |
| 451 | pinctrl-names = "default"; |
| 452 | pinctrl-0 = <&i2c6_bus>; |
| 453 | status = "disabled"; |
| 454 | }; |
| 455 | |
| 456 | i2c_7: i2c@12cd0000 { |
| 457 | compatible = "samsung,s3c2440-i2c"; |
| 458 | reg = <0x12cd0000 0x100>; |
| 459 | interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; |
| 460 | #address-cells = <1>; |
| 461 | #size-cells = <0>; |
| 462 | clocks = <&clock CLK_I2C7>; |
| 463 | clock-names = "i2c"; |
| 464 | pinctrl-names = "default"; |
| 465 | pinctrl-0 = <&i2c7_bus>; |
| 466 | status = "disabled"; |
| 467 | }; |
| 468 | |
| 469 | i2c_8: i2c@12ce0000 { |
| 470 | compatible = "samsung,s3c2440-hdmiphy-i2c"; |
| 471 | reg = <0x12ce0000 0x1000>; |
| 472 | interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; |
| 473 | #address-cells = <1>; |
| 474 | #size-cells = <0>; |
| 475 | clocks = <&clock CLK_I2C_HDMI>; |
| 476 | clock-names = "i2c"; |
| 477 | status = "disabled"; |
| 478 | |
| 479 | hdmiphy: hdmi-phy@38 { |
| 480 | compatible = "samsung,exynos4212-hdmiphy"; |
| 481 | reg = <0x38>; |
| 482 | }; |
| 483 | }; |
| 484 | |
| 485 | i2c_9: i2c@121d0000 { |
| 486 | compatible = "samsung,exynos5-sata-phy-i2c"; |
| 487 | reg = <0x121d0000 0x100>; |
| 488 | #address-cells = <1>; |
| 489 | #size-cells = <0>; |
| 490 | clocks = <&clock CLK_SATA_PHYI2C>; |
| 491 | clock-names = "i2c"; |
| 492 | status = "disabled"; |
| 493 | |
| 494 | sata_phy_i2c: sata-phy-i2c@38 { |
| 495 | compatible = "samsung,exynos-sataphy-i2c"; |
| 496 | reg = <0x38>; |
| 497 | status = "disabled"; |
| 498 | }; |
| 499 | }; |
| 500 | |
| 501 | spi_0: spi@12d20000 { |
| 502 | compatible = "samsung,exynos4210-spi"; |
| 503 | status = "disabled"; |
| 504 | reg = <0x12d20000 0x100>; |
| 505 | interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; |
| 506 | dmas = <&pdma0 5>, <&pdma0 4>; |
| 507 | dma-names = "tx", "rx"; |
| 508 | #address-cells = <1>; |
| 509 | #size-cells = <0>; |
| 510 | clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>; |
| 511 | clock-names = "spi", "spi_busclk0"; |
| 512 | pinctrl-names = "default"; |
| 513 | pinctrl-0 = <&spi0_bus>; |
| 514 | }; |
| 515 | |
| 516 | spi_1: spi@12d30000 { |
| 517 | compatible = "samsung,exynos4210-spi"; |
| 518 | status = "disabled"; |
| 519 | reg = <0x12d30000 0x100>; |
| 520 | interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; |
| 521 | dmas = <&pdma1 5>, <&pdma1 4>; |
| 522 | dma-names = "tx", "rx"; |
| 523 | #address-cells = <1>; |
| 524 | #size-cells = <0>; |
| 525 | clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>; |
| 526 | clock-names = "spi", "spi_busclk0"; |
| 527 | pinctrl-names = "default"; |
| 528 | pinctrl-0 = <&spi1_bus>; |
| 529 | }; |
| 530 | |
| 531 | spi_2: spi@12d40000 { |
| 532 | compatible = "samsung,exynos4210-spi"; |
| 533 | status = "disabled"; |
| 534 | reg = <0x12d40000 0x100>; |
| 535 | interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; |
| 536 | dmas = <&pdma0 7>, <&pdma0 6>; |
| 537 | dma-names = "tx", "rx"; |
| 538 | #address-cells = <1>; |
| 539 | #size-cells = <0>; |
| 540 | clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>; |
| 541 | clock-names = "spi", "spi_busclk0"; |
| 542 | pinctrl-names = "default"; |
| 543 | pinctrl-0 = <&spi2_bus>; |
| 544 | }; |
| 545 | |
| 546 | mmc_0: mmc@12200000 { |
| 547 | compatible = "samsung,exynos5250-dw-mshc"; |
| 548 | interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; |
| 549 | #address-cells = <1>; |
| 550 | #size-cells = <0>; |
| 551 | reg = <0x12200000 0x1000>; |
| 552 | clocks = <&clock CLK_SDMMC0>, <&clock CLK_SCLK_MMC0>; |
| 553 | clock-names = "biu", "ciu"; |
| 554 | fifo-depth = <0x80>; |
| 555 | status = "disabled"; |
| 556 | }; |
| 557 | |
| 558 | mmc_1: mmc@12210000 { |
| 559 | compatible = "samsung,exynos5250-dw-mshc"; |
| 560 | interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; |
| 561 | #address-cells = <1>; |
| 562 | #size-cells = <0>; |
| 563 | reg = <0x12210000 0x1000>; |
| 564 | clocks = <&clock CLK_SDMMC1>, <&clock CLK_SCLK_MMC1>; |
| 565 | clock-names = "biu", "ciu"; |
| 566 | fifo-depth = <0x80>; |
| 567 | status = "disabled"; |
| 568 | }; |
| 569 | |
| 570 | mmc_2: mmc@12220000 { |
| 571 | compatible = "samsung,exynos5250-dw-mshc"; |
| 572 | interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; |
| 573 | #address-cells = <1>; |
| 574 | #size-cells = <0>; |
| 575 | reg = <0x12220000 0x1000>; |
| 576 | clocks = <&clock CLK_SDMMC2>, <&clock CLK_SCLK_MMC2>; |
| 577 | clock-names = "biu", "ciu"; |
| 578 | fifo-depth = <0x80>; |
| 579 | status = "disabled"; |
| 580 | }; |
| 581 | |
| 582 | mmc_3: mmc@12230000 { |
| 583 | compatible = "samsung,exynos5250-dw-mshc"; |
| 584 | reg = <0x12230000 0x1000>; |
| 585 | interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; |
| 586 | #address-cells = <1>; |
| 587 | #size-cells = <0>; |
| 588 | clocks = <&clock CLK_SDMMC3>, <&clock CLK_SCLK_MMC3>; |
| 589 | clock-names = "biu", "ciu"; |
| 590 | fifo-depth = <0x80>; |
| 591 | status = "disabled"; |
| 592 | }; |
| 593 | |
| 594 | i2s0: i2s@3830000 { |
| 595 | compatible = "samsung,s5pv210-i2s"; |
| 596 | status = "disabled"; |
| 597 | reg = <0x03830000 0x100>; |
| 598 | dmas = <&pdma0 10>, |
| 599 | <&pdma0 9>, |
| 600 | <&pdma0 8>; |
| 601 | dma-names = "tx", "rx", "tx-sec"; |
| 602 | clocks = <&clock_audss EXYNOS_I2S_BUS>, |
| 603 | <&clock_audss EXYNOS_I2S_BUS>, |
| 604 | <&clock_audss EXYNOS_SCLK_I2S>; |
| 605 | clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; |
| 606 | samsung,idma-addr = <0x03000000>; |
| 607 | pinctrl-names = "default"; |
| 608 | pinctrl-0 = <&i2s0_bus>; |
| 609 | power-domains = <&pd_mau>; |
| 610 | #clock-cells = <1>; |
| 611 | #sound-dai-cells = <1>; |
| 612 | }; |
| 613 | |
| 614 | i2s1: i2s@12d60000 { |
| 615 | compatible = "samsung,s3c6410-i2s"; |
| 616 | status = "disabled"; |
| 617 | reg = <0x12d60000 0x100>; |
| 618 | dmas = <&pdma1 12>, |
| 619 | <&pdma1 11>; |
| 620 | dma-names = "tx", "rx"; |
| 621 | clocks = <&clock CLK_I2S1>, <&clock CLK_DIV_I2S1>; |
| 622 | clock-names = "iis", "i2s_opclk0"; |
| 623 | pinctrl-names = "default"; |
| 624 | pinctrl-0 = <&i2s1_bus>; |
| 625 | power-domains = <&pd_mau>; |
| 626 | #sound-dai-cells = <1>; |
| 627 | }; |
| 628 | |
| 629 | i2s2: i2s@12d70000 { |
| 630 | compatible = "samsung,s3c6410-i2s"; |
| 631 | status = "disabled"; |
| 632 | reg = <0x12d70000 0x100>; |
| 633 | dmas = <&pdma0 12>, |
| 634 | <&pdma0 11>; |
| 635 | dma-names = "tx", "rx"; |
| 636 | clocks = <&clock CLK_I2S2>, <&clock CLK_DIV_I2S2>; |
| 637 | clock-names = "iis", "i2s_opclk0"; |
| 638 | pinctrl-names = "default"; |
| 639 | pinctrl-0 = <&i2s2_bus>; |
| 640 | power-domains = <&pd_mau>; |
| 641 | #sound-dai-cells = <1>; |
| 642 | }; |
| 643 | |
| 644 | usbdrd: usb@12000000 { |
| 645 | compatible = "samsung,exynos5250-dwusb3"; |
| 646 | clocks = <&clock CLK_USB3>; |
| 647 | clock-names = "usbdrd30"; |
| 648 | #address-cells = <1>; |
| 649 | #size-cells = <1>; |
| 650 | ranges = <0x0 0x12000000 0x10000>; |
| 651 | |
| 652 | usbdrd_dwc3: usb@0 { |
| 653 | compatible = "snps,dwc3"; |
| 654 | reg = <0x0 0x10000>; |
| 655 | interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; |
| 656 | phys = <&usbdrd_phy 0>, <&usbdrd_phy 1>; |
| 657 | phy-names = "usb2-phy", "usb3-phy"; |
| 658 | }; |
| 659 | }; |
| 660 | |
| 661 | usbdrd_phy: phy@12100000 { |
| 662 | compatible = "samsung,exynos5250-usbdrd-phy"; |
| 663 | reg = <0x12100000 0x100>; |
| 664 | clocks = <&clock CLK_USB3>, <&clock CLK_FIN_PLL>; |
| 665 | clock-names = "phy", "ref"; |
| 666 | samsung,pmu-syscon = <&pmu_system_controller>; |
| 667 | #phy-cells = <1>; |
| 668 | }; |
| 669 | |
| 670 | ehci: usb@12110000 { |
| 671 | compatible = "samsung,exynos4210-ehci"; |
| 672 | reg = <0x12110000 0x100>; |
| 673 | interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; |
| 674 | |
| 675 | clocks = <&clock CLK_USB2>; |
| 676 | clock-names = "usbhost"; |
| 677 | phys = <&usb2_phy_gen 1>; |
| 678 | phy-names = "host"; |
| 679 | }; |
| 680 | |
| 681 | ohci: usb@12120000 { |
| 682 | compatible = "samsung,exynos4210-ohci"; |
| 683 | reg = <0x12120000 0x100>; |
| 684 | interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; |
| 685 | |
| 686 | clocks = <&clock CLK_USB2>; |
| 687 | clock-names = "usbhost"; |
| 688 | phys = <&usb2_phy_gen 1>; |
| 689 | phy-names = "host"; |
| 690 | }; |
| 691 | |
| 692 | usb2_phy_gen: phy@12130000 { |
| 693 | compatible = "samsung,exynos5250-usb2-phy"; |
| 694 | reg = <0x12130000 0x100>; |
| 695 | clocks = <&clock CLK_USB2>, <&clock CLK_FIN_PLL>; |
| 696 | clock-names = "phy", "ref"; |
| 697 | #phy-cells = <1>; |
| 698 | samsung,sysreg-phandle = <&sysreg_system_controller>; |
| 699 | samsung,pmureg-phandle = <&pmu_system_controller>; |
| 700 | }; |
| 701 | |
| 702 | pdma0: dma-controller@121a0000 { |
| 703 | compatible = "arm,pl330", "arm,primecell"; |
| 704 | reg = <0x121a0000 0x1000>; |
| 705 | interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; |
| 706 | clocks = <&clock CLK_PDMA0>; |
| 707 | clock-names = "apb_pclk"; |
| 708 | #dma-cells = <1>; |
| 709 | }; |
| 710 | |
| 711 | pdma1: dma-controller@121b0000 { |
| 712 | compatible = "arm,pl330", "arm,primecell"; |
| 713 | reg = <0x121b0000 0x1000>; |
| 714 | interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; |
| 715 | clocks = <&clock CLK_PDMA1>; |
| 716 | clock-names = "apb_pclk"; |
| 717 | #dma-cells = <1>; |
| 718 | }; |
| 719 | |
| 720 | mdma0: dma-controller@10800000 { |
| 721 | compatible = "arm,pl330", "arm,primecell"; |
| 722 | reg = <0x10800000 0x1000>; |
| 723 | interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; |
| 724 | clocks = <&clock CLK_MDMA0>; |
| 725 | clock-names = "apb_pclk"; |
| 726 | #dma-cells = <1>; |
| 727 | }; |
| 728 | |
| 729 | mdma1: dma-controller@11c10000 { |
| 730 | compatible = "arm,pl330", "arm,primecell"; |
| 731 | reg = <0x11c10000 0x1000>; |
| 732 | interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>; |
| 733 | clocks = <&clock CLK_MDMA1>; |
| 734 | clock-names = "apb_pclk"; |
| 735 | #dma-cells = <1>; |
| 736 | }; |
| 737 | |
| 738 | gsc_0: gsc@13e00000 { |
| 739 | compatible = "samsung,exynos5250-gsc", "samsung,exynos5-gsc"; |
| 740 | reg = <0x13e00000 0x1000>; |
| 741 | interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; |
| 742 | power-domains = <&pd_gsc>; |
| 743 | clocks = <&clock CLK_GSCL0>; |
| 744 | clock-names = "gscl"; |
| 745 | iommus = <&sysmmu_gsc0>; |
| 746 | }; |
| 747 | |
| 748 | gsc_1: gsc@13e10000 { |
| 749 | compatible = "samsung,exynos5250-gsc", "samsung,exynos5-gsc"; |
| 750 | reg = <0x13e10000 0x1000>; |
| 751 | interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; |
| 752 | power-domains = <&pd_gsc>; |
| 753 | clocks = <&clock CLK_GSCL1>; |
| 754 | clock-names = "gscl"; |
| 755 | iommus = <&sysmmu_gsc1>; |
| 756 | }; |
| 757 | |
| 758 | gsc_2: gsc@13e20000 { |
| 759 | compatible = "samsung,exynos5250-gsc", "samsung,exynos5-gsc"; |
| 760 | reg = <0x13e20000 0x1000>; |
| 761 | interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; |
| 762 | power-domains = <&pd_gsc>; |
| 763 | clocks = <&clock CLK_GSCL2>; |
| 764 | clock-names = "gscl"; |
| 765 | iommus = <&sysmmu_gsc2>; |
| 766 | }; |
| 767 | |
| 768 | gsc_3: gsc@13e30000 { |
| 769 | compatible = "samsung,exynos5250-gsc", "samsung,exynos5-gsc"; |
| 770 | reg = <0x13e30000 0x1000>; |
| 771 | interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; |
| 772 | power-domains = <&pd_gsc>; |
| 773 | clocks = <&clock CLK_GSCL3>; |
| 774 | clock-names = "gscl"; |
| 775 | iommus = <&sysmmu_gsc3>; |
| 776 | }; |
| 777 | |
| 778 | hdmi: hdmi@14530000 { |
| 779 | compatible = "samsung,exynos4212-hdmi"; |
| 780 | reg = <0x14530000 0x70000>; |
| 781 | power-domains = <&pd_disp1>; |
| 782 | interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; |
| 783 | clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>, |
| 784 | <&clock CLK_SCLK_PIXEL>, <&clock CLK_SCLK_HDMIPHY>, |
| 785 | <&clock CLK_MOUT_HDMI>; |
| 786 | clock-names = "hdmi", "sclk_hdmi", "sclk_pixel", |
| 787 | "sclk_hdmiphy", "mout_hdmi"; |
| 788 | samsung,syscon-phandle = <&pmu_system_controller>; |
| 789 | phy = <&hdmiphy>; |
| 790 | #sound-dai-cells = <0>; |
| 791 | status = "disabled"; |
| 792 | }; |
| 793 | |
| 794 | hdmicec: cec@101b0000 { |
| 795 | compatible = "samsung,s5p-cec"; |
| 796 | reg = <0x101b0000 0x200>; |
| 797 | interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; |
| 798 | clocks = <&clock CLK_HDMI_CEC>; |
| 799 | clock-names = "hdmicec"; |
| 800 | samsung,syscon-phandle = <&pmu_system_controller>; |
| 801 | hdmi-phandle = <&hdmi>; |
| 802 | pinctrl-names = "default"; |
| 803 | pinctrl-0 = <&hdmi_cec>; |
| 804 | status = "disabled"; |
| 805 | }; |
| 806 | |
| 807 | mixer: mixer@14450000 { |
| 808 | compatible = "samsung,exynos5250-mixer"; |
| 809 | reg = <0x14450000 0x10000>; |
| 810 | power-domains = <&pd_disp1>; |
| 811 | interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; |
| 812 | clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>, |
| 813 | <&clock CLK_SCLK_HDMI>; |
| 814 | clock-names = "mixer", "hdmi", "sclk_hdmi"; |
| 815 | iommus = <&sysmmu_tv>; |
| 816 | status = "disabled"; |
| 817 | }; |
| 818 | |
| 819 | dsi_0: dsi@14500000 { |
| 820 | compatible = "samsung,exynos4210-mipi-dsi"; |
| 821 | reg = <0x14500000 0x10000>; |
| 822 | interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; |
| 823 | samsung,power-domain = <&pd_disp1>; |
| 824 | phys = <&mipi_phy 3>; |
| 825 | phy-names = "dsim"; |
| 826 | clocks = <&clock CLK_DSIM0>, <&clock CLK_SCLK_MIPI1>; |
| 827 | clock-names = "bus_clk", "sclk_mipi"; |
| 828 | status = "disabled"; |
| 829 | #address-cells = <1>; |
| 830 | #size-cells = <0>; |
| 831 | }; |
| 832 | |
| 833 | adc: adc@12d10000 { |
| 834 | compatible = "samsung,exynos-adc-v1"; |
| 835 | reg = <0x12d10000 0x100>; |
| 836 | interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; |
| 837 | clocks = <&clock CLK_ADC>; |
| 838 | clock-names = "adc"; |
| 839 | #io-channel-cells = <1>; |
| 840 | samsung,syscon-phandle = <&pmu_system_controller>; |
| 841 | status = "disabled"; |
| 842 | }; |
| 843 | |
| 844 | sysmmu_g2d: sysmmu@10a60000 { |
| 845 | compatible = "samsung,exynos-sysmmu"; |
| 846 | reg = <0x10a60000 0x1000>; |
| 847 | interrupt-parent = <&combiner>; |
| 848 | interrupts = <24 5>; |
| 849 | clock-names = "sysmmu", "master"; |
| 850 | clocks = <&clock CLK_SMMU_2D>, <&clock CLK_G2D>; |
| 851 | #iommu-cells = <0>; |
| 852 | }; |
| 853 | |
| 854 | sysmmu_mfc_r: sysmmu@11200000 { |
| 855 | compatible = "samsung,exynos-sysmmu"; |
| 856 | reg = <0x11200000 0x1000>; |
| 857 | interrupt-parent = <&combiner>; |
| 858 | interrupts = <6 2>; |
| 859 | power-domains = <&pd_mfc>; |
| 860 | clock-names = "sysmmu", "master"; |
| 861 | clocks = <&clock CLK_SMMU_MFCR>, <&clock CLK_MFC>; |
| 862 | #iommu-cells = <0>; |
| 863 | }; |
| 864 | |
| 865 | sysmmu_mfc_l: sysmmu@11210000 { |
| 866 | compatible = "samsung,exynos-sysmmu"; |
| 867 | reg = <0x11210000 0x1000>; |
| 868 | interrupt-parent = <&combiner>; |
| 869 | interrupts = <8 5>; |
| 870 | power-domains = <&pd_mfc>; |
| 871 | clock-names = "sysmmu", "master"; |
| 872 | clocks = <&clock CLK_SMMU_MFCL>, <&clock CLK_MFC>; |
| 873 | #iommu-cells = <0>; |
| 874 | }; |
| 875 | |
| 876 | sysmmu_rotator: sysmmu@11d40000 { |
| 877 | compatible = "samsung,exynos-sysmmu"; |
| 878 | reg = <0x11d40000 0x1000>; |
| 879 | interrupt-parent = <&combiner>; |
| 880 | interrupts = <4 0>; |
| 881 | clock-names = "sysmmu", "master"; |
| 882 | clocks = <&clock CLK_SMMU_ROTATOR>, <&clock CLK_ROTATOR>; |
| 883 | #iommu-cells = <0>; |
| 884 | }; |
| 885 | |
| 886 | sysmmu_jpeg: sysmmu@11f20000 { |
| 887 | compatible = "samsung,exynos-sysmmu"; |
| 888 | reg = <0x11f20000 0x1000>; |
| 889 | interrupt-parent = <&combiner>; |
| 890 | interrupts = <4 2>; |
| 891 | power-domains = <&pd_gsc>; |
| 892 | clock-names = "sysmmu", "master"; |
| 893 | clocks = <&clock CLK_SMMU_JPEG>, <&clock CLK_JPEG>; |
| 894 | #iommu-cells = <0>; |
| 895 | }; |
| 896 | |
| 897 | sysmmu_fimc_isp: sysmmu@13260000 { |
| 898 | compatible = "samsung,exynos-sysmmu"; |
| 899 | reg = <0x13260000 0x1000>; |
| 900 | interrupt-parent = <&combiner>; |
| 901 | interrupts = <10 6>; |
| 902 | clock-names = "sysmmu"; |
| 903 | clocks = <&clock CLK_SMMU_FIMC_ISP>; |
| 904 | #iommu-cells = <0>; |
| 905 | }; |
| 906 | |
| 907 | sysmmu_fimc_drc: sysmmu@13270000 { |
| 908 | compatible = "samsung,exynos-sysmmu"; |
| 909 | reg = <0x13270000 0x1000>; |
| 910 | interrupt-parent = <&combiner>; |
| 911 | interrupts = <11 6>; |
| 912 | clock-names = "sysmmu"; |
| 913 | clocks = <&clock CLK_SMMU_FIMC_DRC>; |
| 914 | #iommu-cells = <0>; |
| 915 | }; |
| 916 | |
| 917 | sysmmu_fimc_fd: sysmmu@132a0000 { |
| 918 | compatible = "samsung,exynos-sysmmu"; |
| 919 | reg = <0x132a0000 0x1000>; |
| 920 | interrupt-parent = <&combiner>; |
| 921 | interrupts = <5 0>; |
| 922 | clock-names = "sysmmu"; |
| 923 | clocks = <&clock CLK_SMMU_FIMC_FD>; |
| 924 | #iommu-cells = <0>; |
| 925 | }; |
| 926 | |
| 927 | sysmmu_fimc_scc: sysmmu@13280000 { |
| 928 | compatible = "samsung,exynos-sysmmu"; |
| 929 | reg = <0x13280000 0x1000>; |
| 930 | interrupt-parent = <&combiner>; |
| 931 | interrupts = <5 2>; |
| 932 | clock-names = "sysmmu"; |
| 933 | clocks = <&clock CLK_SMMU_FIMC_SCC>; |
| 934 | #iommu-cells = <0>; |
| 935 | }; |
| 936 | |
| 937 | sysmmu_fimc_scp: sysmmu@13290000 { |
| 938 | compatible = "samsung,exynos-sysmmu"; |
| 939 | reg = <0x13290000 0x1000>; |
| 940 | interrupt-parent = <&combiner>; |
| 941 | interrupts = <3 6>; |
| 942 | clock-names = "sysmmu"; |
| 943 | clocks = <&clock CLK_SMMU_FIMC_SCP>; |
| 944 | #iommu-cells = <0>; |
| 945 | }; |
| 946 | |
| 947 | sysmmu_fimc_mcuctl: sysmmu@132b0000 { |
| 948 | compatible = "samsung,exynos-sysmmu"; |
| 949 | reg = <0x132b0000 0x1000>; |
| 950 | interrupt-parent = <&combiner>; |
| 951 | interrupts = <5 4>; |
| 952 | clock-names = "sysmmu"; |
| 953 | clocks = <&clock CLK_SMMU_FIMC_MCU>; |
| 954 | #iommu-cells = <0>; |
| 955 | }; |
| 956 | |
| 957 | sysmmu_fimc_odc: sysmmu@132c0000 { |
| 958 | compatible = "samsung,exynos-sysmmu"; |
| 959 | reg = <0x132c0000 0x1000>; |
| 960 | interrupt-parent = <&combiner>; |
| 961 | interrupts = <11 0>; |
| 962 | clock-names = "sysmmu"; |
| 963 | clocks = <&clock CLK_SMMU_FIMC_ODC>; |
| 964 | #iommu-cells = <0>; |
| 965 | }; |
| 966 | |
| 967 | sysmmu_fimc_dis0: sysmmu@132d0000 { |
| 968 | compatible = "samsung,exynos-sysmmu"; |
| 969 | reg = <0x132d0000 0x1000>; |
| 970 | interrupt-parent = <&combiner>; |
| 971 | interrupts = <10 4>; |
| 972 | clock-names = "sysmmu"; |
| 973 | clocks = <&clock CLK_SMMU_FIMC_DIS0>; |
| 974 | #iommu-cells = <0>; |
| 975 | }; |
| 976 | |
| 977 | sysmmu_fimc_dis1: sysmmu@132e0000 { |
| 978 | compatible = "samsung,exynos-sysmmu"; |
| 979 | reg = <0x132e0000 0x1000>; |
| 980 | interrupt-parent = <&combiner>; |
| 981 | interrupts = <9 4>; |
| 982 | clock-names = "sysmmu"; |
| 983 | clocks = <&clock CLK_SMMU_FIMC_DIS1>; |
| 984 | #iommu-cells = <0>; |
| 985 | }; |
| 986 | |
| 987 | sysmmu_fimc_3dnr: sysmmu@132f0000 { |
| 988 | compatible = "samsung,exynos-sysmmu"; |
| 989 | reg = <0x132f0000 0x1000>; |
| 990 | interrupt-parent = <&combiner>; |
| 991 | interrupts = <5 6>; |
| 992 | clock-names = "sysmmu"; |
| 993 | clocks = <&clock CLK_SMMU_FIMC_3DNR>; |
| 994 | #iommu-cells = <0>; |
| 995 | }; |
| 996 | |
| 997 | sysmmu_fimc_lite0: sysmmu@13c40000 { |
| 998 | compatible = "samsung,exynos-sysmmu"; |
| 999 | reg = <0x13c40000 0x1000>; |
| 1000 | interrupt-parent = <&combiner>; |
| 1001 | interrupts = <3 4>; |
| 1002 | power-domains = <&pd_gsc>; |
| 1003 | clock-names = "sysmmu", "master"; |
| 1004 | clocks = <&clock CLK_SMMU_FIMC_LITE0>, <&clock CLK_CAMIF_TOP>; |
| 1005 | #iommu-cells = <0>; |
| 1006 | }; |
| 1007 | |
| 1008 | sysmmu_fimc_lite1: sysmmu@13c50000 { |
| 1009 | compatible = "samsung,exynos-sysmmu"; |
| 1010 | reg = <0x13c50000 0x1000>; |
| 1011 | interrupt-parent = <&combiner>; |
| 1012 | interrupts = <24 1>; |
| 1013 | power-domains = <&pd_gsc>; |
| 1014 | clock-names = "sysmmu", "master"; |
| 1015 | clocks = <&clock CLK_SMMU_FIMC_LITE1>, <&clock CLK_CAMIF_TOP>; |
| 1016 | #iommu-cells = <0>; |
| 1017 | }; |
| 1018 | |
| 1019 | sysmmu_gsc0: sysmmu@13e80000 { |
| 1020 | compatible = "samsung,exynos-sysmmu"; |
| 1021 | reg = <0x13e80000 0x1000>; |
| 1022 | interrupt-parent = <&combiner>; |
| 1023 | interrupts = <2 0>; |
| 1024 | power-domains = <&pd_gsc>; |
| 1025 | clock-names = "sysmmu", "master"; |
| 1026 | clocks = <&clock CLK_SMMU_GSCL0>, <&clock CLK_GSCL0>; |
| 1027 | #iommu-cells = <0>; |
| 1028 | }; |
| 1029 | |
| 1030 | sysmmu_gsc1: sysmmu@13e90000 { |
| 1031 | compatible = "samsung,exynos-sysmmu"; |
| 1032 | reg = <0x13e90000 0x1000>; |
| 1033 | interrupt-parent = <&combiner>; |
| 1034 | interrupts = <2 2>; |
| 1035 | power-domains = <&pd_gsc>; |
| 1036 | clock-names = "sysmmu", "master"; |
| 1037 | clocks = <&clock CLK_SMMU_GSCL1>, <&clock CLK_GSCL1>; |
| 1038 | #iommu-cells = <0>; |
| 1039 | }; |
| 1040 | |
| 1041 | sysmmu_gsc2: sysmmu@13ea0000 { |
| 1042 | compatible = "samsung,exynos-sysmmu"; |
| 1043 | reg = <0x13ea0000 0x1000>; |
| 1044 | interrupt-parent = <&combiner>; |
| 1045 | interrupts = <2 4>; |
| 1046 | power-domains = <&pd_gsc>; |
| 1047 | clock-names = "sysmmu", "master"; |
| 1048 | clocks = <&clock CLK_SMMU_GSCL2>, <&clock CLK_GSCL2>; |
| 1049 | #iommu-cells = <0>; |
| 1050 | }; |
| 1051 | |
| 1052 | sysmmu_gsc3: sysmmu@13eb0000 { |
| 1053 | compatible = "samsung,exynos-sysmmu"; |
| 1054 | reg = <0x13eb0000 0x1000>; |
| 1055 | interrupt-parent = <&combiner>; |
| 1056 | interrupts = <2 6>; |
| 1057 | power-domains = <&pd_gsc>; |
| 1058 | clock-names = "sysmmu", "master"; |
| 1059 | clocks = <&clock CLK_SMMU_GSCL3>, <&clock CLK_GSCL3>; |
| 1060 | #iommu-cells = <0>; |
| 1061 | }; |
| 1062 | |
| 1063 | sysmmu_fimd1: sysmmu@14640000 { |
| 1064 | compatible = "samsung,exynos-sysmmu"; |
| 1065 | reg = <0x14640000 0x1000>; |
| 1066 | interrupt-parent = <&combiner>; |
| 1067 | interrupts = <3 2>; |
| 1068 | power-domains = <&pd_disp1>; |
| 1069 | clock-names = "sysmmu", "master"; |
| 1070 | clocks = <&clock CLK_SMMU_FIMD1>, <&clock CLK_FIMD1>; |
| 1071 | #iommu-cells = <0>; |
| 1072 | }; |
| 1073 | |
| 1074 | sysmmu_tv: sysmmu@14650000 { |
| 1075 | compatible = "samsung,exynos-sysmmu"; |
| 1076 | reg = <0x14650000 0x1000>; |
| 1077 | interrupt-parent = <&combiner>; |
| 1078 | interrupts = <7 4>; |
| 1079 | power-domains = <&pd_disp1>; |
| 1080 | clock-names = "sysmmu", "master"; |
| 1081 | clocks = <&clock CLK_SMMU_TV>, <&clock CLK_MIXER>; |
| 1082 | #iommu-cells = <0>; |
| 1083 | }; |
| 1084 | }; |
| 1085 | |
| 1086 | timer { |
| 1087 | compatible = "arm,armv7-timer"; |
| 1088 | interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| 1089 | <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| 1090 | <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| 1091 | <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; |
| 1092 | /* |
| 1093 | * Unfortunately we need this since some versions |
| 1094 | * of U-Boot on Exynos don't set the CNTFRQ register, |
| 1095 | * so we need the value from DT. |
| 1096 | */ |
| 1097 | clock-frequency = <24000000>; |
| 1098 | }; |
| 1099 | }; |
| 1100 | |
| 1101 | &cpu_thermal { |
| 1102 | polling-delay-passive = <0>; |
| 1103 | polling-delay = <0>; |
| 1104 | thermal-sensors = <&tmu>; |
| 1105 | |
| 1106 | cooling-maps { |
| 1107 | map0 { |
| 1108 | /* Corresponds to 800MHz at freq_table */ |
| 1109 | cooling-device = <&cpu0 9 9>, <&cpu1 9 9>; |
| 1110 | }; |
| 1111 | map1 { |
| 1112 | /* Corresponds to 200MHz at freq_table */ |
| 1113 | cooling-device = <&cpu0 15 15>, |
| 1114 | <&cpu1 15 15>; |
| 1115 | }; |
| 1116 | }; |
| 1117 | }; |
| 1118 | |
| 1119 | &dp { |
| 1120 | power-domains = <&pd_disp1>; |
| 1121 | clocks = <&clock CLK_DP>; |
| 1122 | clock-names = "dp"; |
| 1123 | phys = <&dp_phy>; |
| 1124 | phy-names = "dp"; |
| 1125 | }; |
| 1126 | |
| 1127 | &fimd { |
| 1128 | power-domains = <&pd_disp1>; |
| 1129 | clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>; |
| 1130 | clock-names = "sclk_fimd", "fimd"; |
| 1131 | iommus = <&sysmmu_fimd1>; |
| 1132 | }; |
| 1133 | |
| 1134 | &g2d { |
| 1135 | iommus = <&sysmmu_g2d>; |
| 1136 | clocks = <&clock CLK_G2D>; |
| 1137 | clock-names = "fimg2d"; |
| 1138 | status = "okay"; |
| 1139 | }; |
| 1140 | |
| 1141 | &i2c_0 { |
| 1142 | clocks = <&clock CLK_I2C0>; |
| 1143 | clock-names = "i2c"; |
| 1144 | pinctrl-names = "default"; |
| 1145 | pinctrl-0 = <&i2c0_bus>; |
| 1146 | }; |
| 1147 | |
| 1148 | &i2c_1 { |
| 1149 | clocks = <&clock CLK_I2C1>; |
| 1150 | clock-names = "i2c"; |
| 1151 | pinctrl-names = "default"; |
| 1152 | pinctrl-0 = <&i2c1_bus>; |
| 1153 | }; |
| 1154 | |
| 1155 | &i2c_2 { |
| 1156 | clocks = <&clock CLK_I2C2>; |
| 1157 | clock-names = "i2c"; |
| 1158 | pinctrl-names = "default"; |
| 1159 | pinctrl-0 = <&i2c2_bus>; |
| 1160 | }; |
| 1161 | |
| 1162 | &i2c_3 { |
| 1163 | clocks = <&clock CLK_I2C3>; |
| 1164 | clock-names = "i2c"; |
| 1165 | pinctrl-names = "default"; |
| 1166 | pinctrl-0 = <&i2c3_bus>; |
| 1167 | }; |
| 1168 | |
| 1169 | &prng { |
| 1170 | clocks = <&clock CLK_SSS>; |
| 1171 | clock-names = "secss"; |
| 1172 | }; |
| 1173 | |
| 1174 | &pwm { |
| 1175 | clocks = <&clock CLK_PWM>; |
| 1176 | clock-names = "timers"; |
| 1177 | }; |
| 1178 | |
| 1179 | &rtc { |
| 1180 | clocks = <&clock CLK_RTC>; |
| 1181 | clock-names = "rtc"; |
| 1182 | interrupt-parent = <&pmu_system_controller>; |
| 1183 | status = "disabled"; |
| 1184 | }; |
| 1185 | |
| 1186 | &serial_0 { |
| 1187 | clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>; |
| 1188 | clock-names = "uart", "clk_uart_baud0"; |
| 1189 | dmas = <&pdma0 13>, <&pdma0 14>; |
| 1190 | dma-names = "rx", "tx"; |
| 1191 | }; |
| 1192 | |
| 1193 | &serial_1 { |
| 1194 | clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>; |
| 1195 | clock-names = "uart", "clk_uart_baud0"; |
| 1196 | dmas = <&pdma1 15>, <&pdma1 16>; |
| 1197 | dma-names = "rx", "tx"; |
| 1198 | }; |
| 1199 | |
| 1200 | &serial_2 { |
| 1201 | clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>; |
| 1202 | clock-names = "uart", "clk_uart_baud0"; |
| 1203 | dmas = <&pdma0 15>, <&pdma0 16>; |
| 1204 | dma-names = "rx", "tx"; |
| 1205 | }; |
| 1206 | |
| 1207 | &serial_3 { |
| 1208 | clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>; |
| 1209 | clock-names = "uart", "clk_uart_baud0"; |
| 1210 | dmas = <&pdma1 17>, <&pdma1 18>; |
| 1211 | dma-names = "rx", "tx"; |
| 1212 | }; |
| 1213 | |
| 1214 | &sss { |
| 1215 | clocks = <&clock CLK_SSS>; |
| 1216 | clock-names = "secss"; |
| 1217 | }; |
| 1218 | |
| 1219 | &trng { |
| 1220 | clocks = <&clock CLK_SSS>; |
| 1221 | clock-names = "secss"; |
| 1222 | }; |
| 1223 | |
| 1224 | #include "exynos5250-pinctrl.dtsi" |
| 1225 | #include "exynos-syscon-restart.dtsi" |