| Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 1 | Maxim MAX1586 voltage regulator |
| 2 | |
| 3 | Required properties: |
| 4 | - compatible: must be "maxim,max1586" |
| 5 | - reg: I2C slave address, usually 0x14 |
| 6 | - v3-gain: integer specifying the V3 gain as per datasheet |
| 7 | (1 + R24/R25 + R24/185.5kOhm) |
| 8 | - any required generic properties defined in regulator.txt |
| 9 | |
| 10 | Example: |
| 11 | |
| 12 | i2c_master { |
| 13 | max1586@14 { |
| 14 | compatible = "maxim,max1586"; |
| 15 | reg = <0x14>; |
| 16 | v3-gain = <1000000>; |
| 17 | |
| 18 | regulators { |
| 19 | vcc_core: v3 { |
| 20 | regulator-name = "vcc_core"; |
| 21 | regulator-compatible = "Output_V3"; |
| 22 | regulator-min-microvolt = <1000000>; |
| 23 | regulator-max-microvolt = <1705000>; |
| 24 | regulator-always-on; |
| 25 | }; |
| 26 | }; |
| 27 | }; |
| 28 | }; |