Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0+ |
| 2 | /* |
| 3 | * Copyright 2018-2019 NXP |
| 4 | * Dong Aisheng <aisheng.dong@nxp.com> |
| 5 | */ |
| 6 | |
| 7 | #include <dt-bindings/clock/imx8-lpcg.h> |
| 8 | #include <dt-bindings/firmware/imx/rsrc.h> |
| 9 | |
| 10 | dma_ipg_clk: clock-dma-ipg { |
| 11 | compatible = "fixed-clock"; |
| 12 | #clock-cells = <0>; |
| 13 | clock-frequency = <120000000>; |
| 14 | clock-output-names = "dma_ipg_clk"; |
| 15 | }; |
| 16 | |
| 17 | dma_subsys: bus@5a000000 { |
| 18 | compatible = "simple-bus"; |
| 19 | #address-cells = <1>; |
| 20 | #size-cells = <1>; |
| 21 | ranges = <0x5a000000 0x0 0x5a000000 0x1000000>; |
| 22 | |
| 23 | lpspi0: spi@5a000000 { |
| 24 | compatible = "fsl,imx7ulp-spi"; |
| 25 | reg = <0x5a000000 0x10000>; |
| 26 | #address-cells = <1>; |
| 27 | #size-cells = <0>; |
| 28 | interrupts = <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>; |
| 29 | interrupt-parent = <&gic>; |
| 30 | clocks = <&spi0_lpcg 0>, |
| 31 | <&spi0_lpcg 1>; |
| 32 | clock-names = "per", "ipg"; |
| 33 | assigned-clocks = <&clk IMX_SC_R_SPI_0 IMX_SC_PM_CLK_PER>; |
| 34 | assigned-clock-rates = <60000000>; |
| 35 | power-domains = <&pd IMX_SC_R_SPI_0>; |
| 36 | status = "disabled"; |
| 37 | }; |
| 38 | |
| 39 | lpspi1: spi@5a010000 { |
| 40 | compatible = "fsl,imx7ulp-spi"; |
| 41 | reg = <0x5a010000 0x10000>; |
| 42 | #address-cells = <1>; |
| 43 | #size-cells = <0>; |
| 44 | interrupts = <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>; |
| 45 | interrupt-parent = <&gic>; |
| 46 | clocks = <&spi1_lpcg 0>, |
| 47 | <&spi1_lpcg 1>; |
| 48 | clock-names = "per", "ipg"; |
| 49 | assigned-clocks = <&clk IMX_SC_R_SPI_1 IMX_SC_PM_CLK_PER>; |
| 50 | assigned-clock-rates = <60000000>; |
| 51 | power-domains = <&pd IMX_SC_R_SPI_1>; |
| 52 | status = "disabled"; |
| 53 | }; |
| 54 | |
| 55 | lpspi2: spi@5a020000 { |
| 56 | compatible = "fsl,imx7ulp-spi"; |
| 57 | reg = <0x5a020000 0x10000>; |
| 58 | #address-cells = <1>; |
| 59 | #size-cells = <0>; |
| 60 | interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>; |
| 61 | interrupt-parent = <&gic>; |
| 62 | clocks = <&spi2_lpcg 0>, |
| 63 | <&spi2_lpcg 1>; |
| 64 | clock-names = "per", "ipg"; |
| 65 | assigned-clocks = <&clk IMX_SC_R_SPI_2 IMX_SC_PM_CLK_PER>; |
| 66 | assigned-clock-rates = <60000000>; |
| 67 | power-domains = <&pd IMX_SC_R_SPI_2>; |
| 68 | status = "disabled"; |
| 69 | }; |
| 70 | |
| 71 | lpspi3: spi@5a030000 { |
| 72 | compatible = "fsl,imx7ulp-spi"; |
| 73 | reg = <0x5a030000 0x10000>; |
| 74 | #address-cells = <1>; |
| 75 | #size-cells = <0>; |
| 76 | interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>; |
| 77 | interrupt-parent = <&gic>; |
| 78 | clocks = <&spi3_lpcg 0>, |
| 79 | <&spi3_lpcg 1>; |
| 80 | clock-names = "per", "ipg"; |
| 81 | assigned-clocks = <&clk IMX_SC_R_SPI_3 IMX_SC_PM_CLK_PER>; |
| 82 | assigned-clock-rates = <60000000>; |
| 83 | power-domains = <&pd IMX_SC_R_SPI_3>; |
| 84 | status = "disabled"; |
| 85 | }; |
| 86 | |
| 87 | lpuart0: serial@5a060000 { |
| 88 | reg = <0x5a060000 0x1000>; |
| 89 | interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>; |
| 90 | clocks = <&uart0_lpcg IMX_LPCG_CLK_4>, |
| 91 | <&uart0_lpcg IMX_LPCG_CLK_0>; |
| 92 | clock-names = "ipg", "baud"; |
| 93 | assigned-clocks = <&clk IMX_SC_R_UART_0 IMX_SC_PM_CLK_PER>; |
| 94 | assigned-clock-rates = <80000000>; |
| 95 | power-domains = <&pd IMX_SC_R_UART_0>; |
| 96 | dma-names = "tx","rx"; |
| 97 | dmas = <&edma2 9 0 0>, <&edma2 8 0 1>; |
| 98 | status = "disabled"; |
| 99 | }; |
| 100 | |
| 101 | lpuart1: serial@5a070000 { |
| 102 | reg = <0x5a070000 0x1000>; |
| 103 | interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>; |
| 104 | clocks = <&uart1_lpcg IMX_LPCG_CLK_4>, |
| 105 | <&uart1_lpcg IMX_LPCG_CLK_0>; |
| 106 | clock-names = "ipg", "baud"; |
| 107 | assigned-clocks = <&clk IMX_SC_R_UART_1 IMX_SC_PM_CLK_PER>; |
| 108 | assigned-clock-rates = <80000000>; |
| 109 | power-domains = <&pd IMX_SC_R_UART_1>; |
| 110 | dma-names = "tx","rx"; |
| 111 | dmas = <&edma2 11 0 0>, <&edma2 10 0 1>; |
| 112 | status = "disabled"; |
| 113 | }; |
| 114 | |
| 115 | lpuart2: serial@5a080000 { |
| 116 | reg = <0x5a080000 0x1000>; |
| 117 | interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>; |
| 118 | clocks = <&uart2_lpcg IMX_LPCG_CLK_4>, |
| 119 | <&uart2_lpcg IMX_LPCG_CLK_0>; |
| 120 | clock-names = "ipg", "baud"; |
| 121 | assigned-clocks = <&clk IMX_SC_R_UART_2 IMX_SC_PM_CLK_PER>; |
| 122 | assigned-clock-rates = <80000000>; |
| 123 | power-domains = <&pd IMX_SC_R_UART_2>; |
| 124 | dma-names = "tx","rx"; |
| 125 | dmas = <&edma2 13 0 0>, <&edma2 12 0 1>; |
| 126 | status = "disabled"; |
| 127 | }; |
| 128 | |
| 129 | lpuart3: serial@5a090000 { |
| 130 | reg = <0x5a090000 0x1000>; |
| 131 | interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>; |
| 132 | clocks = <&uart3_lpcg IMX_LPCG_CLK_4>, |
| 133 | <&uart3_lpcg IMX_LPCG_CLK_0>; |
| 134 | clock-names = "ipg", "baud"; |
| 135 | assigned-clocks = <&clk IMX_SC_R_UART_3 IMX_SC_PM_CLK_PER>; |
| 136 | assigned-clock-rates = <80000000>; |
| 137 | power-domains = <&pd IMX_SC_R_UART_3>; |
| 138 | dma-names = "tx","rx"; |
| 139 | dmas = <&edma2 15 0 0>, <&edma2 14 0 1>; |
| 140 | status = "disabled"; |
| 141 | }; |
| 142 | |
| 143 | adma_pwm: pwm@5a190000 { |
| 144 | compatible = "fsl,imx8qxp-pwm", "fsl,imx27-pwm"; |
| 145 | reg = <0x5a190000 0x1000>; |
| 146 | interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; |
| 147 | clocks = <&adma_pwm_lpcg 1>, |
| 148 | <&adma_pwm_lpcg 0>; |
| 149 | clock-names = "ipg", "per"; |
| 150 | assigned-clocks = <&clk IMX_SC_R_LCD_0_PWM_0 IMX_SC_PM_CLK_PER>; |
| 151 | assigned-clock-rates = <24000000>; |
| 152 | #pwm-cells = <3>; |
| 153 | power-domains = <&pd IMX_SC_R_LCD_0_PWM_0>; |
| 154 | }; |
| 155 | |
| 156 | edma2: dma-controller@5a1f0000 { |
| 157 | compatible = "fsl,imx8qm-edma"; |
| 158 | reg = <0x5a1f0000 0x170000>; |
| 159 | #dma-cells = <3>; |
| 160 | dma-channels = <16>; |
| 161 | interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, |
| 162 | <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>, |
| 163 | <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, |
| 164 | <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, |
| 165 | <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>, |
| 166 | <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, |
| 167 | <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, |
| 168 | <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, |
| 169 | <GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>, |
| 170 | <GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>, |
| 171 | <GIC_SPI 436 IRQ_TYPE_LEVEL_HIGH>, |
| 172 | <GIC_SPI 437 IRQ_TYPE_LEVEL_HIGH>, |
| 173 | <GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>, |
| 174 | <GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>, |
| 175 | <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>, |
| 176 | <GIC_SPI 441 IRQ_TYPE_LEVEL_HIGH>; |
| 177 | power-domains = <&pd IMX_SC_R_DMA_2_CH0>, |
| 178 | <&pd IMX_SC_R_DMA_2_CH1>, |
| 179 | <&pd IMX_SC_R_DMA_2_CH2>, |
| 180 | <&pd IMX_SC_R_DMA_2_CH3>, |
| 181 | <&pd IMX_SC_R_DMA_2_CH4>, |
| 182 | <&pd IMX_SC_R_DMA_2_CH5>, |
| 183 | <&pd IMX_SC_R_DMA_2_CH6>, |
| 184 | <&pd IMX_SC_R_DMA_2_CH7>, |
| 185 | <&pd IMX_SC_R_DMA_2_CH8>, |
| 186 | <&pd IMX_SC_R_DMA_2_CH9>, |
| 187 | <&pd IMX_SC_R_DMA_2_CH10>, |
| 188 | <&pd IMX_SC_R_DMA_2_CH11>, |
| 189 | <&pd IMX_SC_R_DMA_2_CH12>, |
| 190 | <&pd IMX_SC_R_DMA_2_CH13>, |
| 191 | <&pd IMX_SC_R_DMA_2_CH14>, |
| 192 | <&pd IMX_SC_R_DMA_2_CH15>; |
| 193 | }; |
| 194 | |
| 195 | edma3: dma-controller@5a9f0000 { |
| 196 | compatible = "fsl,imx8qm-edma"; |
| 197 | reg = <0x5a9f0000 0x90000>; |
| 198 | #dma-cells = <3>; |
| 199 | dma-channels = <8>; |
| 200 | interrupts = <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, |
| 201 | <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>, |
| 202 | <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>, |
| 203 | <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>, |
| 204 | <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>, |
| 205 | <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>, |
| 206 | <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>, |
| 207 | <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>; |
| 208 | power-domains = <&pd IMX_SC_R_DMA_3_CH0>, |
| 209 | <&pd IMX_SC_R_DMA_3_CH1>, |
| 210 | <&pd IMX_SC_R_DMA_3_CH2>, |
| 211 | <&pd IMX_SC_R_DMA_3_CH3>, |
| 212 | <&pd IMX_SC_R_DMA_3_CH4>, |
| 213 | <&pd IMX_SC_R_DMA_3_CH5>, |
| 214 | <&pd IMX_SC_R_DMA_3_CH6>, |
| 215 | <&pd IMX_SC_R_DMA_3_CH7>; |
| 216 | }; |
| 217 | |
| 218 | spi0_lpcg: clock-controller@5a400000 { |
| 219 | compatible = "fsl,imx8qxp-lpcg"; |
| 220 | reg = <0x5a400000 0x10000>; |
| 221 | #clock-cells = <1>; |
| 222 | clocks = <&clk IMX_SC_R_SPI_0 IMX_SC_PM_CLK_PER>, |
| 223 | <&dma_ipg_clk>; |
| 224 | clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; |
| 225 | clock-output-names = "spi0_lpcg_clk", |
| 226 | "spi0_lpcg_ipg_clk"; |
| 227 | power-domains = <&pd IMX_SC_R_SPI_0>; |
| 228 | }; |
| 229 | |
| 230 | spi1_lpcg: clock-controller@5a410000 { |
| 231 | compatible = "fsl,imx8qxp-lpcg"; |
| 232 | reg = <0x5a410000 0x10000>; |
| 233 | #clock-cells = <1>; |
| 234 | clocks = <&clk IMX_SC_R_SPI_1 IMX_SC_PM_CLK_PER>, |
| 235 | <&dma_ipg_clk>; |
| 236 | clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; |
| 237 | clock-output-names = "spi1_lpcg_clk", |
| 238 | "spi1_lpcg_ipg_clk"; |
| 239 | power-domains = <&pd IMX_SC_R_SPI_1>; |
| 240 | }; |
| 241 | |
| 242 | spi2_lpcg: clock-controller@5a420000 { |
| 243 | compatible = "fsl,imx8qxp-lpcg"; |
| 244 | reg = <0x5a420000 0x10000>; |
| 245 | #clock-cells = <1>; |
| 246 | clocks = <&clk IMX_SC_R_SPI_2 IMX_SC_PM_CLK_PER>, |
| 247 | <&dma_ipg_clk>; |
| 248 | clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; |
| 249 | clock-output-names = "spi2_lpcg_clk", |
| 250 | "spi2_lpcg_ipg_clk"; |
| 251 | power-domains = <&pd IMX_SC_R_SPI_2>; |
| 252 | }; |
| 253 | |
| 254 | spi3_lpcg: clock-controller@5a430000 { |
| 255 | compatible = "fsl,imx8qxp-lpcg"; |
| 256 | reg = <0x5a430000 0x10000>; |
| 257 | #clock-cells = <1>; |
| 258 | clocks = <&clk IMX_SC_R_SPI_3 IMX_SC_PM_CLK_PER>, |
| 259 | <&dma_ipg_clk>; |
| 260 | clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; |
| 261 | clock-output-names = "spi3_lpcg_clk", |
| 262 | "spi3_lpcg_ipg_clk"; |
| 263 | power-domains = <&pd IMX_SC_R_SPI_3>; |
| 264 | }; |
| 265 | |
| 266 | uart0_lpcg: clock-controller@5a460000 { |
| 267 | compatible = "fsl,imx8qxp-lpcg"; |
| 268 | reg = <0x5a460000 0x10000>; |
| 269 | #clock-cells = <1>; |
| 270 | clocks = <&clk IMX_SC_R_UART_0 IMX_SC_PM_CLK_PER>, |
| 271 | <&dma_ipg_clk>; |
| 272 | clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; |
| 273 | clock-output-names = "uart0_lpcg_baud_clk", |
| 274 | "uart0_lpcg_ipg_clk"; |
| 275 | power-domains = <&pd IMX_SC_R_UART_0>; |
| 276 | }; |
| 277 | |
| 278 | uart1_lpcg: clock-controller@5a470000 { |
| 279 | compatible = "fsl,imx8qxp-lpcg"; |
| 280 | reg = <0x5a470000 0x10000>; |
| 281 | #clock-cells = <1>; |
| 282 | clocks = <&clk IMX_SC_R_UART_1 IMX_SC_PM_CLK_PER>, |
| 283 | <&dma_ipg_clk>; |
| 284 | clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; |
| 285 | clock-output-names = "uart1_lpcg_baud_clk", |
| 286 | "uart1_lpcg_ipg_clk"; |
| 287 | power-domains = <&pd IMX_SC_R_UART_1>; |
| 288 | }; |
| 289 | |
| 290 | uart2_lpcg: clock-controller@5a480000 { |
| 291 | compatible = "fsl,imx8qxp-lpcg"; |
| 292 | reg = <0x5a480000 0x10000>; |
| 293 | #clock-cells = <1>; |
| 294 | clocks = <&clk IMX_SC_R_UART_2 IMX_SC_PM_CLK_PER>, |
| 295 | <&dma_ipg_clk>; |
| 296 | clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; |
| 297 | clock-output-names = "uart2_lpcg_baud_clk", |
| 298 | "uart2_lpcg_ipg_clk"; |
| 299 | power-domains = <&pd IMX_SC_R_UART_2>; |
| 300 | }; |
| 301 | |
| 302 | uart3_lpcg: clock-controller@5a490000 { |
| 303 | compatible = "fsl,imx8qxp-lpcg"; |
| 304 | reg = <0x5a490000 0x10000>; |
| 305 | #clock-cells = <1>; |
| 306 | clocks = <&clk IMX_SC_R_UART_3 IMX_SC_PM_CLK_PER>, |
| 307 | <&dma_ipg_clk>; |
| 308 | clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; |
| 309 | clock-output-names = "uart3_lpcg_baud_clk", |
| 310 | "uart3_lpcg_ipg_clk"; |
| 311 | power-domains = <&pd IMX_SC_R_UART_3>; |
| 312 | }; |
| 313 | |
| 314 | adma_pwm_lpcg: clock-controller@5a590000 { |
| 315 | compatible = "fsl,imx8qxp-lpcg"; |
| 316 | reg = <0x5a590000 0x10000>; |
| 317 | #clock-cells = <1>; |
| 318 | clocks = <&clk IMX_SC_R_LCD_0_PWM_0 IMX_SC_PM_CLK_PER>, |
| 319 | <&dma_ipg_clk>; |
| 320 | clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; |
| 321 | clock-output-names = "adma_pwm_lpcg_clk", |
| 322 | "adma_pwm_lpcg_ipg_clk"; |
| 323 | power-domains = <&pd IMX_SC_R_LCD_0_PWM_0>; |
| 324 | }; |
| 325 | |
| 326 | i2c0: i2c@5a800000 { |
| 327 | reg = <0x5a800000 0x4000>; |
| 328 | interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; |
| 329 | clocks = <&i2c0_lpcg IMX_LPCG_CLK_0>, |
| 330 | <&i2c0_lpcg IMX_LPCG_CLK_4>; |
| 331 | clock-names = "per", "ipg"; |
| 332 | assigned-clocks = <&clk IMX_SC_R_I2C_0 IMX_SC_PM_CLK_PER>; |
| 333 | assigned-clock-rates = <24000000>; |
| 334 | power-domains = <&pd IMX_SC_R_I2C_0>; |
| 335 | status = "disabled"; |
| 336 | }; |
| 337 | |
| 338 | i2c1: i2c@5a810000 { |
| 339 | reg = <0x5a810000 0x4000>; |
| 340 | interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; |
| 341 | clocks = <&i2c1_lpcg IMX_LPCG_CLK_0>, |
| 342 | <&i2c1_lpcg IMX_LPCG_CLK_4>; |
| 343 | clock-names = "per", "ipg"; |
| 344 | assigned-clocks = <&clk IMX_SC_R_I2C_1 IMX_SC_PM_CLK_PER>; |
| 345 | assigned-clock-rates = <24000000>; |
| 346 | power-domains = <&pd IMX_SC_R_I2C_1>; |
| 347 | status = "disabled"; |
| 348 | }; |
| 349 | |
| 350 | i2c2: i2c@5a820000 { |
| 351 | reg = <0x5a820000 0x4000>; |
| 352 | interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>; |
| 353 | clocks = <&i2c2_lpcg IMX_LPCG_CLK_0>, |
| 354 | <&i2c2_lpcg IMX_LPCG_CLK_4>; |
| 355 | clock-names = "per", "ipg"; |
| 356 | assigned-clocks = <&clk IMX_SC_R_I2C_2 IMX_SC_PM_CLK_PER>; |
| 357 | assigned-clock-rates = <24000000>; |
| 358 | power-domains = <&pd IMX_SC_R_I2C_2>; |
| 359 | status = "disabled"; |
| 360 | }; |
| 361 | |
| 362 | i2c3: i2c@5a830000 { |
| 363 | reg = <0x5a830000 0x4000>; |
| 364 | interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; |
| 365 | clocks = <&i2c3_lpcg IMX_LPCG_CLK_0>, |
| 366 | <&i2c3_lpcg IMX_LPCG_CLK_4>; |
| 367 | clock-names = "per", "ipg"; |
| 368 | assigned-clocks = <&clk IMX_SC_R_I2C_3 IMX_SC_PM_CLK_PER>; |
| 369 | assigned-clock-rates = <24000000>; |
| 370 | power-domains = <&pd IMX_SC_R_I2C_3>; |
| 371 | status = "disabled"; |
| 372 | }; |
| 373 | |
| 374 | adc0: adc@5a880000 { |
| 375 | compatible = "nxp,imx8qxp-adc"; |
| 376 | #io-channel-cells = <1>; |
| 377 | reg = <0x5a880000 0x10000>; |
| 378 | interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>; |
| 379 | interrupt-parent = <&gic>; |
| 380 | clocks = <&adc0_lpcg 0>, |
| 381 | <&adc0_lpcg 1>; |
| 382 | clock-names = "per", "ipg"; |
| 383 | assigned-clocks = <&clk IMX_SC_R_ADC_0 IMX_SC_PM_CLK_PER>; |
| 384 | assigned-clock-rates = <24000000>; |
| 385 | power-domains = <&pd IMX_SC_R_ADC_0>; |
| 386 | status = "disabled"; |
| 387 | }; |
| 388 | |
| 389 | adc1: adc@5a890000 { |
| 390 | compatible = "nxp,imx8qxp-adc"; |
| 391 | #io-channel-cells = <1>; |
| 392 | reg = <0x5a890000 0x10000>; |
| 393 | interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>; |
| 394 | interrupt-parent = <&gic>; |
| 395 | clocks = <&adc1_lpcg 0>, |
| 396 | <&adc1_lpcg 1>; |
| 397 | clock-names = "per", "ipg"; |
| 398 | assigned-clocks = <&clk IMX_SC_R_ADC_1 IMX_SC_PM_CLK_PER>; |
| 399 | assigned-clock-rates = <24000000>; |
| 400 | power-domains = <&pd IMX_SC_R_ADC_1>; |
| 401 | status = "disabled"; |
| 402 | }; |
| 403 | |
| 404 | flexcan1: can@5a8d0000 { |
| 405 | compatible = "fsl,imx8qm-flexcan"; |
| 406 | reg = <0x5a8d0000 0x10000>; |
| 407 | interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>; |
| 408 | interrupt-parent = <&gic>; |
| 409 | clocks = <&can0_lpcg 1>, |
| 410 | <&can0_lpcg 0>; |
| 411 | clock-names = "ipg", "per"; |
| 412 | assigned-clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>; |
| 413 | assigned-clock-rates = <40000000>; |
| 414 | power-domains = <&pd IMX_SC_R_CAN_0>; |
| 415 | /* SLSlice[4] */ |
| 416 | fsl,clk-source = /bits/ 8 <0>; |
| 417 | fsl,scu-index = /bits/ 8 <0>; |
| 418 | status = "disabled"; |
| 419 | }; |
| 420 | |
| 421 | flexcan2: can@5a8e0000 { |
| 422 | compatible = "fsl,imx8qm-flexcan"; |
| 423 | reg = <0x5a8e0000 0x10000>; |
| 424 | interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>; |
| 425 | interrupt-parent = <&gic>; |
| 426 | /* CAN0 clock and PD is shared among all CAN instances as |
| 427 | * CAN1 shares CAN0's clock and to enable CAN0's clock it |
| 428 | * has to be powered on. |
| 429 | */ |
| 430 | clocks = <&can0_lpcg 1>, |
| 431 | <&can0_lpcg 0>; |
| 432 | clock-names = "ipg", "per"; |
| 433 | assigned-clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>; |
| 434 | assigned-clock-rates = <40000000>; |
| 435 | power-domains = <&pd IMX_SC_R_CAN_1>; |
| 436 | /* SLSlice[4] */ |
| 437 | fsl,clk-source = /bits/ 8 <0>; |
| 438 | fsl,scu-index = /bits/ 8 <1>; |
| 439 | status = "disabled"; |
| 440 | }; |
| 441 | |
| 442 | flexcan3: can@5a8f0000 { |
| 443 | compatible = "fsl,imx8qm-flexcan"; |
| 444 | reg = <0x5a8f0000 0x10000>; |
| 445 | interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>; |
| 446 | interrupt-parent = <&gic>; |
| 447 | /* CAN0 clock and PD is shared among all CAN instances as |
| 448 | * CAN2 shares CAN0's clock and to enable CAN0's clock it |
| 449 | * has to be powered on. |
| 450 | */ |
| 451 | clocks = <&can0_lpcg 1>, |
| 452 | <&can0_lpcg 0>; |
| 453 | clock-names = "ipg", "per"; |
| 454 | assigned-clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>; |
| 455 | assigned-clock-rates = <40000000>; |
| 456 | power-domains = <&pd IMX_SC_R_CAN_2>; |
| 457 | /* SLSlice[4] */ |
| 458 | fsl,clk-source = /bits/ 8 <0>; |
| 459 | fsl,scu-index = /bits/ 8 <2>; |
| 460 | status = "disabled"; |
| 461 | }; |
| 462 | |
| 463 | i2c0_lpcg: clock-controller@5ac00000 { |
| 464 | compatible = "fsl,imx8qxp-lpcg"; |
| 465 | reg = <0x5ac00000 0x10000>; |
| 466 | #clock-cells = <1>; |
| 467 | clocks = <&clk IMX_SC_R_I2C_0 IMX_SC_PM_CLK_PER>, |
| 468 | <&dma_ipg_clk>; |
| 469 | clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; |
| 470 | clock-output-names = "i2c0_lpcg_clk", |
| 471 | "i2c0_lpcg_ipg_clk"; |
| 472 | power-domains = <&pd IMX_SC_R_I2C_0>; |
| 473 | }; |
| 474 | |
| 475 | i2c1_lpcg: clock-controller@5ac10000 { |
| 476 | compatible = "fsl,imx8qxp-lpcg"; |
| 477 | reg = <0x5ac10000 0x10000>; |
| 478 | #clock-cells = <1>; |
| 479 | clocks = <&clk IMX_SC_R_I2C_1 IMX_SC_PM_CLK_PER>, |
| 480 | <&dma_ipg_clk>; |
| 481 | clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; |
| 482 | clock-output-names = "i2c1_lpcg_clk", |
| 483 | "i2c1_lpcg_ipg_clk"; |
| 484 | power-domains = <&pd IMX_SC_R_I2C_1>; |
| 485 | }; |
| 486 | |
| 487 | i2c2_lpcg: clock-controller@5ac20000 { |
| 488 | compatible = "fsl,imx8qxp-lpcg"; |
| 489 | reg = <0x5ac20000 0x10000>; |
| 490 | #clock-cells = <1>; |
| 491 | clocks = <&clk IMX_SC_R_I2C_2 IMX_SC_PM_CLK_PER>, |
| 492 | <&dma_ipg_clk>; |
| 493 | clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; |
| 494 | clock-output-names = "i2c2_lpcg_clk", |
| 495 | "i2c2_lpcg_ipg_clk"; |
| 496 | power-domains = <&pd IMX_SC_R_I2C_2>; |
| 497 | }; |
| 498 | |
| 499 | i2c3_lpcg: clock-controller@5ac30000 { |
| 500 | compatible = "fsl,imx8qxp-lpcg"; |
| 501 | reg = <0x5ac30000 0x10000>; |
| 502 | #clock-cells = <1>; |
| 503 | clocks = <&clk IMX_SC_R_I2C_3 IMX_SC_PM_CLK_PER>, |
| 504 | <&dma_ipg_clk>; |
| 505 | clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; |
| 506 | clock-output-names = "i2c3_lpcg_clk", |
| 507 | "i2c3_lpcg_ipg_clk"; |
| 508 | power-domains = <&pd IMX_SC_R_I2C_3>; |
| 509 | }; |
| 510 | |
| 511 | adc0_lpcg: clock-controller@5ac80000 { |
| 512 | compatible = "fsl,imx8qxp-lpcg"; |
| 513 | reg = <0x5ac80000 0x10000>; |
| 514 | #clock-cells = <1>; |
| 515 | clocks = <&clk IMX_SC_R_ADC_0 IMX_SC_PM_CLK_PER>, |
| 516 | <&dma_ipg_clk>; |
| 517 | clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; |
| 518 | clock-output-names = "adc0_lpcg_clk", |
| 519 | "adc0_lpcg_ipg_clk"; |
| 520 | power-domains = <&pd IMX_SC_R_ADC_0>; |
| 521 | }; |
| 522 | |
| 523 | adc1_lpcg: clock-controller@5ac90000 { |
| 524 | compatible = "fsl,imx8qxp-lpcg"; |
| 525 | reg = <0x5ac90000 0x10000>; |
| 526 | #clock-cells = <1>; |
| 527 | clocks = <&clk IMX_SC_R_ADC_1 IMX_SC_PM_CLK_PER>, |
| 528 | <&dma_ipg_clk>; |
| 529 | clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; |
| 530 | clock-output-names = "adc1_lpcg_clk", |
| 531 | "adc1_lpcg_ipg_clk"; |
| 532 | power-domains = <&pd IMX_SC_R_ADC_1>; |
| 533 | }; |
| 534 | |
| 535 | can0_lpcg: clock-controller@5acd0000 { |
| 536 | compatible = "fsl,imx8qxp-lpcg"; |
| 537 | reg = <0x5acd0000 0x10000>; |
| 538 | #clock-cells = <1>; |
| 539 | clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>, |
| 540 | <&dma_ipg_clk>, <&dma_ipg_clk>; |
| 541 | clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>; |
| 542 | clock-output-names = "can0_lpcg_pe_clk", |
| 543 | "can0_lpcg_ipg_clk", |
| 544 | "can0_lpcg_chi_clk"; |
| 545 | power-domains = <&pd IMX_SC_R_CAN_0>; |
| 546 | }; |
| 547 | }; |