| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright 2018-2019 NXP |
| * Dong Aisheng <aisheng.dong@nxp.com> |
| */ |
| |
| #include <dt-bindings/clock/imx8-lpcg.h> |
| #include <dt-bindings/firmware/imx/rsrc.h> |
| |
| dma_ipg_clk: clock-dma-ipg { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <120000000>; |
| clock-output-names = "dma_ipg_clk"; |
| }; |
| |
| dma_subsys: bus@5a000000 { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x5a000000 0x0 0x5a000000 0x1000000>; |
| |
| lpspi0: spi@5a000000 { |
| compatible = "fsl,imx7ulp-spi"; |
| reg = <0x5a000000 0x10000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-parent = <&gic>; |
| clocks = <&spi0_lpcg 0>, |
| <&spi0_lpcg 1>; |
| clock-names = "per", "ipg"; |
| assigned-clocks = <&clk IMX_SC_R_SPI_0 IMX_SC_PM_CLK_PER>; |
| assigned-clock-rates = <60000000>; |
| power-domains = <&pd IMX_SC_R_SPI_0>; |
| status = "disabled"; |
| }; |
| |
| lpspi1: spi@5a010000 { |
| compatible = "fsl,imx7ulp-spi"; |
| reg = <0x5a010000 0x10000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-parent = <&gic>; |
| clocks = <&spi1_lpcg 0>, |
| <&spi1_lpcg 1>; |
| clock-names = "per", "ipg"; |
| assigned-clocks = <&clk IMX_SC_R_SPI_1 IMX_SC_PM_CLK_PER>; |
| assigned-clock-rates = <60000000>; |
| power-domains = <&pd IMX_SC_R_SPI_1>; |
| status = "disabled"; |
| }; |
| |
| lpspi2: spi@5a020000 { |
| compatible = "fsl,imx7ulp-spi"; |
| reg = <0x5a020000 0x10000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-parent = <&gic>; |
| clocks = <&spi2_lpcg 0>, |
| <&spi2_lpcg 1>; |
| clock-names = "per", "ipg"; |
| assigned-clocks = <&clk IMX_SC_R_SPI_2 IMX_SC_PM_CLK_PER>; |
| assigned-clock-rates = <60000000>; |
| power-domains = <&pd IMX_SC_R_SPI_2>; |
| status = "disabled"; |
| }; |
| |
| lpspi3: spi@5a030000 { |
| compatible = "fsl,imx7ulp-spi"; |
| reg = <0x5a030000 0x10000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-parent = <&gic>; |
| clocks = <&spi3_lpcg 0>, |
| <&spi3_lpcg 1>; |
| clock-names = "per", "ipg"; |
| assigned-clocks = <&clk IMX_SC_R_SPI_3 IMX_SC_PM_CLK_PER>; |
| assigned-clock-rates = <60000000>; |
| power-domains = <&pd IMX_SC_R_SPI_3>; |
| status = "disabled"; |
| }; |
| |
| lpuart0: serial@5a060000 { |
| reg = <0x5a060000 0x1000>; |
| interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&uart0_lpcg IMX_LPCG_CLK_4>, |
| <&uart0_lpcg IMX_LPCG_CLK_0>; |
| clock-names = "ipg", "baud"; |
| assigned-clocks = <&clk IMX_SC_R_UART_0 IMX_SC_PM_CLK_PER>; |
| assigned-clock-rates = <80000000>; |
| power-domains = <&pd IMX_SC_R_UART_0>; |
| dma-names = "tx","rx"; |
| dmas = <&edma2 9 0 0>, <&edma2 8 0 1>; |
| status = "disabled"; |
| }; |
| |
| lpuart1: serial@5a070000 { |
| reg = <0x5a070000 0x1000>; |
| interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&uart1_lpcg IMX_LPCG_CLK_4>, |
| <&uart1_lpcg IMX_LPCG_CLK_0>; |
| clock-names = "ipg", "baud"; |
| assigned-clocks = <&clk IMX_SC_R_UART_1 IMX_SC_PM_CLK_PER>; |
| assigned-clock-rates = <80000000>; |
| power-domains = <&pd IMX_SC_R_UART_1>; |
| dma-names = "tx","rx"; |
| dmas = <&edma2 11 0 0>, <&edma2 10 0 1>; |
| status = "disabled"; |
| }; |
| |
| lpuart2: serial@5a080000 { |
| reg = <0x5a080000 0x1000>; |
| interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&uart2_lpcg IMX_LPCG_CLK_4>, |
| <&uart2_lpcg IMX_LPCG_CLK_0>; |
| clock-names = "ipg", "baud"; |
| assigned-clocks = <&clk IMX_SC_R_UART_2 IMX_SC_PM_CLK_PER>; |
| assigned-clock-rates = <80000000>; |
| power-domains = <&pd IMX_SC_R_UART_2>; |
| dma-names = "tx","rx"; |
| dmas = <&edma2 13 0 0>, <&edma2 12 0 1>; |
| status = "disabled"; |
| }; |
| |
| lpuart3: serial@5a090000 { |
| reg = <0x5a090000 0x1000>; |
| interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&uart3_lpcg IMX_LPCG_CLK_4>, |
| <&uart3_lpcg IMX_LPCG_CLK_0>; |
| clock-names = "ipg", "baud"; |
| assigned-clocks = <&clk IMX_SC_R_UART_3 IMX_SC_PM_CLK_PER>; |
| assigned-clock-rates = <80000000>; |
| power-domains = <&pd IMX_SC_R_UART_3>; |
| dma-names = "tx","rx"; |
| dmas = <&edma2 15 0 0>, <&edma2 14 0 1>; |
| status = "disabled"; |
| }; |
| |
| adma_pwm: pwm@5a190000 { |
| compatible = "fsl,imx8qxp-pwm", "fsl,imx27-pwm"; |
| reg = <0x5a190000 0x1000>; |
| interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&adma_pwm_lpcg 1>, |
| <&adma_pwm_lpcg 0>; |
| clock-names = "ipg", "per"; |
| assigned-clocks = <&clk IMX_SC_R_LCD_0_PWM_0 IMX_SC_PM_CLK_PER>; |
| assigned-clock-rates = <24000000>; |
| #pwm-cells = <3>; |
| power-domains = <&pd IMX_SC_R_LCD_0_PWM_0>; |
| }; |
| |
| edma2: dma-controller@5a1f0000 { |
| compatible = "fsl,imx8qm-edma"; |
| reg = <0x5a1f0000 0x170000>; |
| #dma-cells = <3>; |
| dma-channels = <16>; |
| interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 436 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 437 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 441 IRQ_TYPE_LEVEL_HIGH>; |
| power-domains = <&pd IMX_SC_R_DMA_2_CH0>, |
| <&pd IMX_SC_R_DMA_2_CH1>, |
| <&pd IMX_SC_R_DMA_2_CH2>, |
| <&pd IMX_SC_R_DMA_2_CH3>, |
| <&pd IMX_SC_R_DMA_2_CH4>, |
| <&pd IMX_SC_R_DMA_2_CH5>, |
| <&pd IMX_SC_R_DMA_2_CH6>, |
| <&pd IMX_SC_R_DMA_2_CH7>, |
| <&pd IMX_SC_R_DMA_2_CH8>, |
| <&pd IMX_SC_R_DMA_2_CH9>, |
| <&pd IMX_SC_R_DMA_2_CH10>, |
| <&pd IMX_SC_R_DMA_2_CH11>, |
| <&pd IMX_SC_R_DMA_2_CH12>, |
| <&pd IMX_SC_R_DMA_2_CH13>, |
| <&pd IMX_SC_R_DMA_2_CH14>, |
| <&pd IMX_SC_R_DMA_2_CH15>; |
| }; |
| |
| edma3: dma-controller@5a9f0000 { |
| compatible = "fsl,imx8qm-edma"; |
| reg = <0x5a9f0000 0x90000>; |
| #dma-cells = <3>; |
| dma-channels = <8>; |
| interrupts = <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>; |
| power-domains = <&pd IMX_SC_R_DMA_3_CH0>, |
| <&pd IMX_SC_R_DMA_3_CH1>, |
| <&pd IMX_SC_R_DMA_3_CH2>, |
| <&pd IMX_SC_R_DMA_3_CH3>, |
| <&pd IMX_SC_R_DMA_3_CH4>, |
| <&pd IMX_SC_R_DMA_3_CH5>, |
| <&pd IMX_SC_R_DMA_3_CH6>, |
| <&pd IMX_SC_R_DMA_3_CH7>; |
| }; |
| |
| spi0_lpcg: clock-controller@5a400000 { |
| compatible = "fsl,imx8qxp-lpcg"; |
| reg = <0x5a400000 0x10000>; |
| #clock-cells = <1>; |
| clocks = <&clk IMX_SC_R_SPI_0 IMX_SC_PM_CLK_PER>, |
| <&dma_ipg_clk>; |
| clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; |
| clock-output-names = "spi0_lpcg_clk", |
| "spi0_lpcg_ipg_clk"; |
| power-domains = <&pd IMX_SC_R_SPI_0>; |
| }; |
| |
| spi1_lpcg: clock-controller@5a410000 { |
| compatible = "fsl,imx8qxp-lpcg"; |
| reg = <0x5a410000 0x10000>; |
| #clock-cells = <1>; |
| clocks = <&clk IMX_SC_R_SPI_1 IMX_SC_PM_CLK_PER>, |
| <&dma_ipg_clk>; |
| clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; |
| clock-output-names = "spi1_lpcg_clk", |
| "spi1_lpcg_ipg_clk"; |
| power-domains = <&pd IMX_SC_R_SPI_1>; |
| }; |
| |
| spi2_lpcg: clock-controller@5a420000 { |
| compatible = "fsl,imx8qxp-lpcg"; |
| reg = <0x5a420000 0x10000>; |
| #clock-cells = <1>; |
| clocks = <&clk IMX_SC_R_SPI_2 IMX_SC_PM_CLK_PER>, |
| <&dma_ipg_clk>; |
| clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; |
| clock-output-names = "spi2_lpcg_clk", |
| "spi2_lpcg_ipg_clk"; |
| power-domains = <&pd IMX_SC_R_SPI_2>; |
| }; |
| |
| spi3_lpcg: clock-controller@5a430000 { |
| compatible = "fsl,imx8qxp-lpcg"; |
| reg = <0x5a430000 0x10000>; |
| #clock-cells = <1>; |
| clocks = <&clk IMX_SC_R_SPI_3 IMX_SC_PM_CLK_PER>, |
| <&dma_ipg_clk>; |
| clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; |
| clock-output-names = "spi3_lpcg_clk", |
| "spi3_lpcg_ipg_clk"; |
| power-domains = <&pd IMX_SC_R_SPI_3>; |
| }; |
| |
| uart0_lpcg: clock-controller@5a460000 { |
| compatible = "fsl,imx8qxp-lpcg"; |
| reg = <0x5a460000 0x10000>; |
| #clock-cells = <1>; |
| clocks = <&clk IMX_SC_R_UART_0 IMX_SC_PM_CLK_PER>, |
| <&dma_ipg_clk>; |
| clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; |
| clock-output-names = "uart0_lpcg_baud_clk", |
| "uart0_lpcg_ipg_clk"; |
| power-domains = <&pd IMX_SC_R_UART_0>; |
| }; |
| |
| uart1_lpcg: clock-controller@5a470000 { |
| compatible = "fsl,imx8qxp-lpcg"; |
| reg = <0x5a470000 0x10000>; |
| #clock-cells = <1>; |
| clocks = <&clk IMX_SC_R_UART_1 IMX_SC_PM_CLK_PER>, |
| <&dma_ipg_clk>; |
| clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; |
| clock-output-names = "uart1_lpcg_baud_clk", |
| "uart1_lpcg_ipg_clk"; |
| power-domains = <&pd IMX_SC_R_UART_1>; |
| }; |
| |
| uart2_lpcg: clock-controller@5a480000 { |
| compatible = "fsl,imx8qxp-lpcg"; |
| reg = <0x5a480000 0x10000>; |
| #clock-cells = <1>; |
| clocks = <&clk IMX_SC_R_UART_2 IMX_SC_PM_CLK_PER>, |
| <&dma_ipg_clk>; |
| clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; |
| clock-output-names = "uart2_lpcg_baud_clk", |
| "uart2_lpcg_ipg_clk"; |
| power-domains = <&pd IMX_SC_R_UART_2>; |
| }; |
| |
| uart3_lpcg: clock-controller@5a490000 { |
| compatible = "fsl,imx8qxp-lpcg"; |
| reg = <0x5a490000 0x10000>; |
| #clock-cells = <1>; |
| clocks = <&clk IMX_SC_R_UART_3 IMX_SC_PM_CLK_PER>, |
| <&dma_ipg_clk>; |
| clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; |
| clock-output-names = "uart3_lpcg_baud_clk", |
| "uart3_lpcg_ipg_clk"; |
| power-domains = <&pd IMX_SC_R_UART_3>; |
| }; |
| |
| adma_pwm_lpcg: clock-controller@5a590000 { |
| compatible = "fsl,imx8qxp-lpcg"; |
| reg = <0x5a590000 0x10000>; |
| #clock-cells = <1>; |
| clocks = <&clk IMX_SC_R_LCD_0_PWM_0 IMX_SC_PM_CLK_PER>, |
| <&dma_ipg_clk>; |
| clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; |
| clock-output-names = "adma_pwm_lpcg_clk", |
| "adma_pwm_lpcg_ipg_clk"; |
| power-domains = <&pd IMX_SC_R_LCD_0_PWM_0>; |
| }; |
| |
| i2c0: i2c@5a800000 { |
| reg = <0x5a800000 0x4000>; |
| interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&i2c0_lpcg IMX_LPCG_CLK_0>, |
| <&i2c0_lpcg IMX_LPCG_CLK_4>; |
| clock-names = "per", "ipg"; |
| assigned-clocks = <&clk IMX_SC_R_I2C_0 IMX_SC_PM_CLK_PER>; |
| assigned-clock-rates = <24000000>; |
| power-domains = <&pd IMX_SC_R_I2C_0>; |
| status = "disabled"; |
| }; |
| |
| i2c1: i2c@5a810000 { |
| reg = <0x5a810000 0x4000>; |
| interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&i2c1_lpcg IMX_LPCG_CLK_0>, |
| <&i2c1_lpcg IMX_LPCG_CLK_4>; |
| clock-names = "per", "ipg"; |
| assigned-clocks = <&clk IMX_SC_R_I2C_1 IMX_SC_PM_CLK_PER>; |
| assigned-clock-rates = <24000000>; |
| power-domains = <&pd IMX_SC_R_I2C_1>; |
| status = "disabled"; |
| }; |
| |
| i2c2: i2c@5a820000 { |
| reg = <0x5a820000 0x4000>; |
| interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&i2c2_lpcg IMX_LPCG_CLK_0>, |
| <&i2c2_lpcg IMX_LPCG_CLK_4>; |
| clock-names = "per", "ipg"; |
| assigned-clocks = <&clk IMX_SC_R_I2C_2 IMX_SC_PM_CLK_PER>; |
| assigned-clock-rates = <24000000>; |
| power-domains = <&pd IMX_SC_R_I2C_2>; |
| status = "disabled"; |
| }; |
| |
| i2c3: i2c@5a830000 { |
| reg = <0x5a830000 0x4000>; |
| interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&i2c3_lpcg IMX_LPCG_CLK_0>, |
| <&i2c3_lpcg IMX_LPCG_CLK_4>; |
| clock-names = "per", "ipg"; |
| assigned-clocks = <&clk IMX_SC_R_I2C_3 IMX_SC_PM_CLK_PER>; |
| assigned-clock-rates = <24000000>; |
| power-domains = <&pd IMX_SC_R_I2C_3>; |
| status = "disabled"; |
| }; |
| |
| adc0: adc@5a880000 { |
| compatible = "nxp,imx8qxp-adc"; |
| #io-channel-cells = <1>; |
| reg = <0x5a880000 0x10000>; |
| interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-parent = <&gic>; |
| clocks = <&adc0_lpcg 0>, |
| <&adc0_lpcg 1>; |
| clock-names = "per", "ipg"; |
| assigned-clocks = <&clk IMX_SC_R_ADC_0 IMX_SC_PM_CLK_PER>; |
| assigned-clock-rates = <24000000>; |
| power-domains = <&pd IMX_SC_R_ADC_0>; |
| status = "disabled"; |
| }; |
| |
| adc1: adc@5a890000 { |
| compatible = "nxp,imx8qxp-adc"; |
| #io-channel-cells = <1>; |
| reg = <0x5a890000 0x10000>; |
| interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-parent = <&gic>; |
| clocks = <&adc1_lpcg 0>, |
| <&adc1_lpcg 1>; |
| clock-names = "per", "ipg"; |
| assigned-clocks = <&clk IMX_SC_R_ADC_1 IMX_SC_PM_CLK_PER>; |
| assigned-clock-rates = <24000000>; |
| power-domains = <&pd IMX_SC_R_ADC_1>; |
| status = "disabled"; |
| }; |
| |
| flexcan1: can@5a8d0000 { |
| compatible = "fsl,imx8qm-flexcan"; |
| reg = <0x5a8d0000 0x10000>; |
| interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-parent = <&gic>; |
| clocks = <&can0_lpcg 1>, |
| <&can0_lpcg 0>; |
| clock-names = "ipg", "per"; |
| assigned-clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>; |
| assigned-clock-rates = <40000000>; |
| power-domains = <&pd IMX_SC_R_CAN_0>; |
| /* SLSlice[4] */ |
| fsl,clk-source = /bits/ 8 <0>; |
| fsl,scu-index = /bits/ 8 <0>; |
| status = "disabled"; |
| }; |
| |
| flexcan2: can@5a8e0000 { |
| compatible = "fsl,imx8qm-flexcan"; |
| reg = <0x5a8e0000 0x10000>; |
| interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-parent = <&gic>; |
| /* CAN0 clock and PD is shared among all CAN instances as |
| * CAN1 shares CAN0's clock and to enable CAN0's clock it |
| * has to be powered on. |
| */ |
| clocks = <&can0_lpcg 1>, |
| <&can0_lpcg 0>; |
| clock-names = "ipg", "per"; |
| assigned-clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>; |
| assigned-clock-rates = <40000000>; |
| power-domains = <&pd IMX_SC_R_CAN_1>; |
| /* SLSlice[4] */ |
| fsl,clk-source = /bits/ 8 <0>; |
| fsl,scu-index = /bits/ 8 <1>; |
| status = "disabled"; |
| }; |
| |
| flexcan3: can@5a8f0000 { |
| compatible = "fsl,imx8qm-flexcan"; |
| reg = <0x5a8f0000 0x10000>; |
| interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-parent = <&gic>; |
| /* CAN0 clock and PD is shared among all CAN instances as |
| * CAN2 shares CAN0's clock and to enable CAN0's clock it |
| * has to be powered on. |
| */ |
| clocks = <&can0_lpcg 1>, |
| <&can0_lpcg 0>; |
| clock-names = "ipg", "per"; |
| assigned-clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>; |
| assigned-clock-rates = <40000000>; |
| power-domains = <&pd IMX_SC_R_CAN_2>; |
| /* SLSlice[4] */ |
| fsl,clk-source = /bits/ 8 <0>; |
| fsl,scu-index = /bits/ 8 <2>; |
| status = "disabled"; |
| }; |
| |
| i2c0_lpcg: clock-controller@5ac00000 { |
| compatible = "fsl,imx8qxp-lpcg"; |
| reg = <0x5ac00000 0x10000>; |
| #clock-cells = <1>; |
| clocks = <&clk IMX_SC_R_I2C_0 IMX_SC_PM_CLK_PER>, |
| <&dma_ipg_clk>; |
| clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; |
| clock-output-names = "i2c0_lpcg_clk", |
| "i2c0_lpcg_ipg_clk"; |
| power-domains = <&pd IMX_SC_R_I2C_0>; |
| }; |
| |
| i2c1_lpcg: clock-controller@5ac10000 { |
| compatible = "fsl,imx8qxp-lpcg"; |
| reg = <0x5ac10000 0x10000>; |
| #clock-cells = <1>; |
| clocks = <&clk IMX_SC_R_I2C_1 IMX_SC_PM_CLK_PER>, |
| <&dma_ipg_clk>; |
| clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; |
| clock-output-names = "i2c1_lpcg_clk", |
| "i2c1_lpcg_ipg_clk"; |
| power-domains = <&pd IMX_SC_R_I2C_1>; |
| }; |
| |
| i2c2_lpcg: clock-controller@5ac20000 { |
| compatible = "fsl,imx8qxp-lpcg"; |
| reg = <0x5ac20000 0x10000>; |
| #clock-cells = <1>; |
| clocks = <&clk IMX_SC_R_I2C_2 IMX_SC_PM_CLK_PER>, |
| <&dma_ipg_clk>; |
| clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; |
| clock-output-names = "i2c2_lpcg_clk", |
| "i2c2_lpcg_ipg_clk"; |
| power-domains = <&pd IMX_SC_R_I2C_2>; |
| }; |
| |
| i2c3_lpcg: clock-controller@5ac30000 { |
| compatible = "fsl,imx8qxp-lpcg"; |
| reg = <0x5ac30000 0x10000>; |
| #clock-cells = <1>; |
| clocks = <&clk IMX_SC_R_I2C_3 IMX_SC_PM_CLK_PER>, |
| <&dma_ipg_clk>; |
| clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; |
| clock-output-names = "i2c3_lpcg_clk", |
| "i2c3_lpcg_ipg_clk"; |
| power-domains = <&pd IMX_SC_R_I2C_3>; |
| }; |
| |
| adc0_lpcg: clock-controller@5ac80000 { |
| compatible = "fsl,imx8qxp-lpcg"; |
| reg = <0x5ac80000 0x10000>; |
| #clock-cells = <1>; |
| clocks = <&clk IMX_SC_R_ADC_0 IMX_SC_PM_CLK_PER>, |
| <&dma_ipg_clk>; |
| clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; |
| clock-output-names = "adc0_lpcg_clk", |
| "adc0_lpcg_ipg_clk"; |
| power-domains = <&pd IMX_SC_R_ADC_0>; |
| }; |
| |
| adc1_lpcg: clock-controller@5ac90000 { |
| compatible = "fsl,imx8qxp-lpcg"; |
| reg = <0x5ac90000 0x10000>; |
| #clock-cells = <1>; |
| clocks = <&clk IMX_SC_R_ADC_1 IMX_SC_PM_CLK_PER>, |
| <&dma_ipg_clk>; |
| clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>; |
| clock-output-names = "adc1_lpcg_clk", |
| "adc1_lpcg_ipg_clk"; |
| power-domains = <&pd IMX_SC_R_ADC_1>; |
| }; |
| |
| can0_lpcg: clock-controller@5acd0000 { |
| compatible = "fsl,imx8qxp-lpcg"; |
| reg = <0x5acd0000 0x10000>; |
| #clock-cells = <1>; |
| clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>, |
| <&dma_ipg_clk>, <&dma_ipg_clk>; |
| clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>; |
| clock-output-names = "can0_lpcg_pe_clk", |
| "can0_lpcg_ipg_clk", |
| "can0_lpcg_chi_clk"; |
| power-domains = <&pd IMX_SC_R_CAN_0>; |
| }; |
| }; |