| Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 1 | // SPDX-License-Identifier: (GPL-2.0 OR MIT) |
| 2 | /* Copyright (c) 2022 Microchip Technology Inc */ |
| 3 | |
| 4 | /dts-v1/; |
| 5 | |
| 6 | #include "mpfs.dtsi" |
| 7 | #include "mpfs-sev-kit-fabric.dtsi" |
| 8 | |
| 9 | / { |
| 10 | #address-cells = <2>; |
| 11 | #size-cells = <2>; |
| 12 | model = "Microchip PolarFire-SoC SEV Kit"; |
| 13 | compatible = "microchip,mpfs-sev-kit", "microchip,mpfs"; |
| 14 | |
| 15 | aliases { |
| 16 | ethernet0 = &mac1; |
| 17 | serial0 = &mmuart0; |
| 18 | serial1 = &mmuart1; |
| 19 | serial2 = &mmuart2; |
| 20 | serial3 = &mmuart3; |
| 21 | serial4 = &mmuart4; |
| 22 | }; |
| 23 | |
| 24 | chosen { |
| 25 | stdout-path = "serial1:115200n8"; |
| 26 | }; |
| 27 | |
| 28 | reserved-memory { |
| 29 | #address-cells = <2>; |
| 30 | #size-cells = <2>; |
| 31 | ranges; |
| 32 | |
| 33 | fabricbuf0ddrc: buffer@80000000 { |
| 34 | compatible = "shared-dma-pool"; |
| 35 | reg = <0x0 0x80000000 0x0 0x2000000>; |
| 36 | }; |
| 37 | |
| 38 | fabricbuf1ddrnc: buffer@c4000000 { |
| 39 | compatible = "shared-dma-pool"; |
| 40 | reg = <0x0 0xc4000000 0x0 0x4000000>; |
| 41 | }; |
| 42 | |
| 43 | fabricbuf2ddrncwcb: buffer@d4000000 { |
| 44 | compatible = "shared-dma-pool"; |
| 45 | reg = <0x0 0xd4000000 0x0 0x4000000>; |
| 46 | }; |
| 47 | }; |
| 48 | |
| 49 | ddrc_cache: memory@1000000000 { |
| 50 | device_type = "memory"; |
| 51 | reg = <0x10 0x0 0x0 0x76000000>; |
| 52 | }; |
| 53 | }; |
| 54 | |
| 55 | &i2c0 { |
| 56 | status = "okay"; |
| 57 | }; |
| 58 | |
| 59 | &gpio2 { |
| 60 | interrupts = <53>, <53>, <53>, <53>, |
| 61 | <53>, <53>, <53>, <53>, |
| 62 | <53>, <53>, <53>, <53>, |
| 63 | <53>, <53>, <53>, <53>, |
| 64 | <53>, <53>, <53>, <53>, |
| 65 | <53>, <53>, <53>, <53>, |
| 66 | <53>, <53>, <53>, <53>, |
| 67 | <53>, <53>, <53>, <53>; |
| 68 | status = "okay"; |
| 69 | }; |
| 70 | |
| 71 | &mac0 { |
| 72 | status = "okay"; |
| 73 | phy-mode = "sgmii"; |
| 74 | phy-handle = <&phy0>; |
| 75 | phy1: ethernet-phy@9 { |
| 76 | reg = <9>; |
| 77 | }; |
| 78 | phy0: ethernet-phy@8 { |
| 79 | reg = <8>; |
| 80 | }; |
| 81 | }; |
| 82 | |
| 83 | &mac1 { |
| 84 | status = "okay"; |
| 85 | phy-mode = "sgmii"; |
| 86 | phy-handle = <&phy1>; |
| 87 | }; |
| 88 | |
| 89 | &mbox { |
| 90 | status = "okay"; |
| 91 | }; |
| 92 | |
| 93 | &mmc { |
| 94 | status = "okay"; |
| 95 | bus-width = <4>; |
| 96 | disable-wp; |
| 97 | cap-sd-highspeed; |
| 98 | cap-mmc-highspeed; |
| 99 | mmc-ddr-1_8v; |
| 100 | mmc-hs200-1_8v; |
| 101 | sd-uhs-sdr12; |
| 102 | sd-uhs-sdr25; |
| 103 | sd-uhs-sdr50; |
| 104 | sd-uhs-sdr104; |
| 105 | }; |
| 106 | |
| 107 | &mmuart1 { |
| 108 | status = "okay"; |
| 109 | }; |
| 110 | |
| 111 | &mmuart2 { |
| 112 | status = "okay"; |
| 113 | }; |
| 114 | |
| 115 | &mmuart3 { |
| 116 | status = "okay"; |
| 117 | }; |
| 118 | |
| 119 | &mmuart4 { |
| 120 | status = "okay"; |
| 121 | }; |
| 122 | |
| 123 | &refclk { |
| 124 | clock-frequency = <125000000>; |
| 125 | }; |
| 126 | |
| 127 | &rtc { |
| 128 | status = "okay"; |
| 129 | }; |
| 130 | |
| 131 | &syscontroller { |
| 132 | status = "okay"; |
| 133 | }; |
| 134 | |
| 135 | &usb { |
| 136 | status = "okay"; |
| 137 | dr_mode = "otg"; |
| 138 | }; |