Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / 6b642aca7f571e777924f50732f530fd94b03bfb / . / src / powerpc / pcm032.dts
blob: d00f13b625103545ca143c561082f43163c28891 [file] [log] [blame]
Tom Rini53633a82024-02-29 12:33:36 -0500[diff] [blame]1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * phyCORE-MPC5200B-IO (pcm032) board Device Tree Source
4 *
5 * Copyright (C) 2006-2009 Pengutronix
6 * Sascha Hauer, Juergen Beisert, Wolfram Sang <kernel@pengutronix.de>
7 */
8
9/include/ "mpc5200b.dtsi"
10
11&gpt0 { fsl,has-wdt; };
12&gpt2 { gpio-controller; };
13&gpt3 { gpio-controller; };
14&gpt4 { gpio-controller; };
15&gpt5 { gpio-controller; };
16&gpt6 { gpio-controller; };
17&gpt7 { gpio-controller; };
18
19/ {
20 model = "phytec,pcm032";
21 compatible = "phytec,pcm032";
22
23 memory@0 {
24 reg = <0x00000000 0x08000000>; // 128MB
25 };
26
27 soc5200@f0000000 {
28 psc@2000 { /* PSC1 is ac97 */
29 compatible = "fsl,mpc5200b-psc-ac97","fsl,mpc5200-psc-ac97";
30 cell-index = <0>;
31 };
32
33 /* PSC2 port is used by CAN1/2 */
34 psc@2200 {
35 status = "disabled";
36 };
37
38 psc@2400 { /* PSC3 in UART mode */
39 compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
40 };
41
42 /* PSC4 is ??? */
43 psc@2600 {
44 status = "disabled";
45 };
46
47 /* PSC5 is ??? */
48 psc@2800 {
49 status = "disabled";
50 };
51
52 psc@2c00 { /* PSC6 in UART mode */
53 compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
54 };
55
56 ethernet@3000 {
57 phy-handle = <&phy0>;
58 };
59
60 mdio@3000 {
61 phy0: ethernet-phy@0 {
62 reg = <0>;
63 };
64 };
65
66 i2c@3d40 {
67 rtc@51 {
68 compatible = "nxp,pcf8563";
69 reg = <0x51>;
70 };
71 eeprom@52 {
72 compatible = "catalyst,24c32", "atmel,24c32";
73 reg = <0x52>;
74 pagesize = <32>;
75 };
76 };
77 };
78
79 pci@f0000d00 {
80 interrupt-map-mask = <0xf800 0 0 7>;
81 interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
82 0xc000 0 0 2 &mpc5200_pic 1 1 3
83 0xc000 0 0 3 &mpc5200_pic 1 2 3
84 0xc000 0 0 4 &mpc5200_pic 1 3 3
85
86 0xc800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot
87 0xc800 0 0 2 &mpc5200_pic 1 2 3
88 0xc800 0 0 3 &mpc5200_pic 1 3 3
89 0xc800 0 0 4 &mpc5200_pic 0 0 3>;
90 ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000>,
91 <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000>,
92 <0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
93 };
94
95 localbus {
96 ranges = <0 0 0xfe000000 0x02000000
97 1 0 0xfc000000 0x02000000
98 2 0 0xfbe00000 0x00200000
99 3 0 0xf9e00000 0x02000000
100 4 0 0xf7e00000 0x02000000
101 5 0 0xe6000000 0x02000000
102 6 0 0xe8000000 0x02000000
103 7 0 0xea000000 0x02000000>;
104
105 flash@0,0 {
106 compatible = "cfi-flash";
107 reg = <0 0 0x02000000>;
108 bank-width = <4>;
109 #size-cells = <1>;
110 #address-cells = <1>;
111
112 partition@0 {
113 label = "ubootl";
114 reg = <0x00000000 0x00040000>;
115 };
116 partition@40000 {
117 label = "kernel";
118 reg = <0x00040000 0x001c0000>;
119 };
120 partition@200000 {
121 label = "jffs2";
122 reg = <0x00200000 0x01d00000>;
123 };
124 partition@1f00000 {
125 label = "uboot";
126 reg = <0x01f00000 0x00040000>;
127 };
128 partition@1f40000 {
129 label = "env";
130 reg = <0x01f40000 0x00040000>;
131 };
132 partition@1f80000 {
133 label = "oftree";
134 reg = <0x01f80000 0x00040000>;
135 };
136 partition@1fc0000 {
137 label = "space";
138 reg = <0x01fc0000 0x00040000>;
139 };
140 };
141
142 sram@2,0 {
143 compatible = "mtd-ram";
144 reg = <2 0 0x00200000>;
145 bank-width = <2>;
146 };
147
148 /*
149 * example snippets for FPGA
150 *
151 * fpga@3,0 {
152 * compatible = "fpga_driver";
153 * reg = <3 0 0x02000000>;
154 * bank-width = <4>;
155 * };
156 *
157 * fpga@4,0 {
158 * compatible = "fpga_driver";
159 * reg = <4 0 0x02000000>;
160 * bank-width = <4>;
161 * };
162 */
163
164 /*
165 * example snippets for free chipselects
166 *
167 * device@5,0 {
168 * compatible = "custom_driver";
169 * reg = <5 0 0x02000000>;
170 * };
171 *
172 * device@6,0 {
173 * compatible = "custom_driver";
174 * reg = <6 0 0x02000000>;
175 * };
176 *
177 * device@7,0 {
178 * compatible = "custom_driver";
179 * reg = <7 0 0x02000000>;
180 * };
181 */
182 };
183};