Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 1 | // SPDX-License-Identifier: BSD-3-Clause |
| 2 | /* |
| 3 | * Copyright (c) 2023 Linaro Limited |
| 4 | */ |
| 5 | |
| 6 | /dts-v1/; |
| 7 | |
| 8 | #include <dt-bindings/leds/common.h> |
| 9 | #include <dt-bindings/regulator/qcom,rpmh-regulator.h> |
| 10 | #include "sm8550.dtsi" |
| 11 | #include "pm8010.dtsi" |
| 12 | #include "pm8550.dtsi" |
| 13 | #include "pm8550b.dtsi" |
Tom Rini | 93743d2 | 2024-04-01 09:08:13 -0400 | [diff] [blame] | 14 | #define PMK8550VE_SID 5 |
Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 15 | #include "pm8550ve.dtsi" |
| 16 | #include "pm8550vs.dtsi" |
| 17 | #include "pmk8550.dtsi" |
| 18 | #include "pmr735d_a.dtsi" |
| 19 | #include "pmr735d_b.dtsi" |
| 20 | |
| 21 | / { |
| 22 | model = "Qualcomm Technologies, Inc. SM8550 QRD"; |
| 23 | compatible = "qcom,sm8550-qrd", "qcom,sm8550"; |
| 24 | chassis-type = "handset"; |
| 25 | |
| 26 | aliases { |
| 27 | serial0 = &uart7; |
| 28 | serial1 = &uart14; |
| 29 | }; |
| 30 | |
| 31 | wcd938x: audio-codec { |
| 32 | compatible = "qcom,wcd9385-codec"; |
| 33 | |
| 34 | pinctrl-names = "default"; |
| 35 | pinctrl-0 = <&wcd_default>; |
| 36 | |
| 37 | qcom,micbias1-microvolt = <1800000>; |
| 38 | qcom,micbias2-microvolt = <1800000>; |
| 39 | qcom,micbias3-microvolt = <1800000>; |
| 40 | qcom,micbias4-microvolt = <1800000>; |
| 41 | qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; |
| 42 | qcom,mbhc-headset-vthreshold-microvolt = <1700000>; |
| 43 | qcom,mbhc-headphone-vthreshold-microvolt = <50000>; |
| 44 | qcom,rx-device = <&wcd_rx>; |
| 45 | qcom,tx-device = <&wcd_tx>; |
| 46 | |
| 47 | reset-gpios = <&tlmm 108 GPIO_ACTIVE_LOW>; |
| 48 | |
| 49 | vdd-buck-supply = <&vreg_l15b_1p8>; |
| 50 | vdd-rxtx-supply = <&vreg_l15b_1p8>; |
| 51 | vdd-io-supply = <&vreg_l15b_1p8>; |
| 52 | vdd-mic-bias-supply = <&vreg_bob1>; |
| 53 | |
| 54 | #sound-dai-cells = <1>; |
| 55 | }; |
| 56 | |
| 57 | chosen { |
| 58 | stdout-path = "serial0:115200n8"; |
| 59 | }; |
| 60 | |
| 61 | gpio-keys { |
| 62 | compatible = "gpio-keys"; |
| 63 | |
| 64 | pinctrl-0 = <&volume_up_n>; |
| 65 | pinctrl-names = "default"; |
| 66 | |
| 67 | key-volume-up { |
| 68 | label = "Volume Up"; |
| 69 | linux,code = <KEY_VOLUMEUP>; |
| 70 | gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>; |
| 71 | debounce-interval = <15>; |
| 72 | linux,can-disable; |
| 73 | wakeup-source; |
| 74 | }; |
| 75 | }; |
| 76 | |
| 77 | pmic-glink { |
| 78 | compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink"; |
| 79 | #address-cells = <1>; |
| 80 | #size-cells = <0>; |
| 81 | orientation-gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>; |
| 82 | |
| 83 | connector@0 { |
| 84 | compatible = "usb-c-connector"; |
| 85 | reg = <0>; |
| 86 | power-role = "dual"; |
| 87 | data-role = "dual"; |
| 88 | |
| 89 | ports { |
| 90 | #address-cells = <1>; |
| 91 | #size-cells = <0>; |
| 92 | |
| 93 | port@0 { |
| 94 | reg = <0>; |
| 95 | |
| 96 | pmic_glink_hs_in: endpoint { |
| 97 | remote-endpoint = <&usb_1_dwc3_hs>; |
| 98 | }; |
| 99 | }; |
| 100 | |
| 101 | port@1 { |
| 102 | reg = <1>; |
| 103 | |
| 104 | pmic_glink_ss_in: endpoint { |
| 105 | remote-endpoint = <&redriver_ss_out>; |
| 106 | }; |
| 107 | }; |
| 108 | |
| 109 | port@2 { |
| 110 | reg = <2>; |
| 111 | |
| 112 | pmic_glink_sbu: endpoint { |
| 113 | remote-endpoint = <&fsa4480_sbu_mux>; |
| 114 | }; |
| 115 | }; |
| 116 | }; |
| 117 | }; |
| 118 | }; |
| 119 | |
| 120 | sound { |
| 121 | compatible = "qcom,sm8550-sndcard", "qcom,sm8450-sndcard"; |
| 122 | model = "SM8550-QRD"; |
| 123 | audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT", |
| 124 | "SpkrRight IN", "WSA_SPK2 OUT", |
| 125 | "IN1_HPHL", "HPHL_OUT", |
| 126 | "IN2_HPHR", "HPHR_OUT", |
Tom Rini | 6bb92fc | 2024-05-20 09:54:58 -0600 | [diff] [blame] | 127 | "AMIC1", "MIC BIAS1", |
Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 128 | "AMIC2", "MIC BIAS2", |
Tom Rini | 6bb92fc | 2024-05-20 09:54:58 -0600 | [diff] [blame] | 129 | "AMIC3", "MIC BIAS3", |
| 130 | "AMIC4", "MIC BIAS3", |
| 131 | "AMIC5", "MIC BIAS4", |
Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 132 | "VA DMIC0", "MIC BIAS1", |
| 133 | "VA DMIC1", "MIC BIAS1", |
| 134 | "VA DMIC2", "MIC BIAS3", |
| 135 | "TX DMIC0", "MIC BIAS1", |
| 136 | "TX DMIC1", "MIC BIAS2", |
| 137 | "TX DMIC2", "MIC BIAS3", |
Tom Rini | 6bb92fc | 2024-05-20 09:54:58 -0600 | [diff] [blame] | 138 | "TX SWR_INPUT0", "ADC1_OUTPUT", |
| 139 | "TX SWR_INPUT1", "ADC2_OUTPUT", |
| 140 | "TX SWR_INPUT0", "ADC3_OUTPUT", |
| 141 | "TX SWR_INPUT1", "ADC4_OUTPUT"; |
Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 142 | |
| 143 | wcd-playback-dai-link { |
| 144 | link-name = "WCD Playback"; |
| 145 | |
| 146 | cpu { |
| 147 | sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>; |
| 148 | }; |
| 149 | |
| 150 | codec { |
| 151 | sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>; |
| 152 | }; |
| 153 | |
| 154 | platform { |
| 155 | sound-dai = <&q6apm>; |
| 156 | }; |
| 157 | }; |
| 158 | |
| 159 | wcd-capture-dai-link { |
| 160 | link-name = "WCD Capture"; |
| 161 | |
| 162 | cpu { |
| 163 | sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; |
| 164 | }; |
| 165 | |
| 166 | codec { |
| 167 | sound-dai = <&wcd938x 1>, <&swr2 0>, <&lpass_txmacro 0>; |
| 168 | }; |
| 169 | |
| 170 | platform { |
| 171 | sound-dai = <&q6apm>; |
| 172 | }; |
| 173 | }; |
| 174 | |
| 175 | wsa-dai-link { |
| 176 | link-name = "WSA Playback"; |
| 177 | |
| 178 | cpu { |
| 179 | sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; |
| 180 | }; |
| 181 | |
| 182 | codec { |
| 183 | sound-dai = <&north_spkr>, <&south_spkr>, <&swr0 0>, <&lpass_wsamacro 0>; |
| 184 | }; |
| 185 | |
| 186 | platform { |
| 187 | sound-dai = <&q6apm>; |
| 188 | }; |
| 189 | }; |
| 190 | |
| 191 | va-dai-link { |
| 192 | link-name = "VA Capture"; |
| 193 | |
| 194 | cpu { |
| 195 | sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; |
| 196 | }; |
| 197 | |
| 198 | codec { |
| 199 | sound-dai = <&lpass_vamacro 0>; |
| 200 | }; |
| 201 | |
| 202 | platform { |
| 203 | sound-dai = <&q6apm>; |
| 204 | }; |
| 205 | }; |
| 206 | }; |
| 207 | |
| 208 | vph_pwr: vph-pwr-regulator { |
| 209 | compatible = "regulator-fixed"; |
| 210 | regulator-name = "vph_pwr"; |
| 211 | regulator-min-microvolt = <3700000>; |
| 212 | regulator-max-microvolt = <3700000>; |
| 213 | |
| 214 | regulator-always-on; |
| 215 | regulator-boot-on; |
| 216 | }; |
Tom Rini | 6b642ac | 2024-10-01 12:20:28 -0600 | [diff] [blame^] | 217 | |
| 218 | wcn7850-pmu { |
| 219 | compatible = "qcom,wcn7850-pmu"; |
| 220 | |
| 221 | pinctrl-names = "default"; |
| 222 | pinctrl-0 = <&wlan_en>, <&pmk8550_sleep_clk>; |
| 223 | |
| 224 | wlan-enable-gpios = <&tlmm 80 GPIO_ACTIVE_HIGH>; |
| 225 | /* |
| 226 | * TODO Add bt-enable-gpios once the Bluetooth driver is |
| 227 | * converted to using the power sequencer. |
| 228 | */ |
| 229 | |
| 230 | vdd-supply = <&vreg_s5g_0p85>; |
| 231 | vddio-supply = <&vreg_l15b_1p8>; |
| 232 | vddaon-supply = <&vreg_s2g_0p85>; |
| 233 | vdddig-supply = <&vreg_s4e_0p95>; |
| 234 | vddrfa1p2-supply = <&vreg_s4g_1p25>; |
| 235 | vddrfa1p8-supply = <&vreg_s6g_1p86>; |
| 236 | |
| 237 | regulators { |
| 238 | vreg_pmu_rfa_cmn: ldo0 { |
| 239 | regulator-name = "vreg_pmu_rfa_cmn"; |
| 240 | }; |
| 241 | |
| 242 | vreg_pmu_aon_0p59: ldo1 { |
| 243 | regulator-name = "vreg_pmu_aon_0p59"; |
| 244 | }; |
| 245 | |
| 246 | vreg_pmu_wlcx_0p8: ldo2 { |
| 247 | regulator-name = "vreg_pmu_wlcx_0p8"; |
| 248 | }; |
| 249 | |
| 250 | vreg_pmu_wlmx_0p85: ldo3 { |
| 251 | regulator-name = "vreg_pmu_wlmx_0p85"; |
| 252 | }; |
| 253 | |
| 254 | vreg_pmu_btcmx_0p85: ldo4 { |
| 255 | regulator-name = "vreg_pmu_btcmx_0p85"; |
| 256 | }; |
| 257 | |
| 258 | vreg_pmu_rfa_0p8: ldo5 { |
| 259 | regulator-name = "vreg_pmu_rfa_0p8"; |
| 260 | }; |
| 261 | |
| 262 | vreg_pmu_rfa_1p2: ldo6 { |
| 263 | regulator-name = "vreg_pmu_rfa_1p2"; |
| 264 | }; |
| 265 | |
| 266 | vreg_pmu_rfa_1p8: ldo7 { |
| 267 | regulator-name = "vreg_pmu_rfa_1p8"; |
| 268 | }; |
| 269 | |
| 270 | vreg_pmu_pcie_0p9: ldo8 { |
| 271 | regulator-name = "vreg_pmu_pcie_0p9"; |
| 272 | }; |
| 273 | |
| 274 | vreg_pmu_pcie_1p8: ldo9 { |
| 275 | regulator-name = "vreg_pmu_pcie_1p8"; |
| 276 | }; |
| 277 | }; |
| 278 | }; |
Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 279 | }; |
| 280 | |
| 281 | &apps_rsc { |
| 282 | regulators-0 { |
| 283 | compatible = "qcom,pm8550-rpmh-regulators"; |
| 284 | qcom,pmic-id = "b"; |
| 285 | |
| 286 | vdd-bob1-supply = <&vph_pwr>; |
| 287 | vdd-bob2-supply = <&vph_pwr>; |
| 288 | vdd-l1-l4-l10-supply = <&vreg_s6g_1p86>; |
| 289 | vdd-l2-l13-l14-supply = <&vreg_bob1>; |
| 290 | vdd-l3-supply = <&vreg_s4g_1p25>; |
| 291 | vdd-l5-l16-supply = <&vreg_bob1>; |
| 292 | vdd-l6-l7-supply = <&vreg_bob1>; |
| 293 | vdd-l8-l9-supply = <&vreg_bob1>; |
| 294 | vdd-l11-supply = <&vreg_s4g_1p25>; |
| 295 | vdd-l12-supply = <&vreg_s6g_1p86>; |
| 296 | vdd-l15-supply = <&vreg_s6g_1p86>; |
| 297 | vdd-l17-supply = <&vreg_bob2>; |
| 298 | |
| 299 | vreg_bob1: bob1 { |
| 300 | regulator-name = "vreg_bob1"; |
| 301 | regulator-min-microvolt = <3296000>; |
| 302 | regulator-max-microvolt = <3960000>; |
| 303 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 304 | }; |
| 305 | |
| 306 | vreg_bob2: bob2 { |
| 307 | regulator-name = "vreg_bob2"; |
| 308 | regulator-min-microvolt = <2720000>; |
| 309 | regulator-max-microvolt = <3960000>; |
| 310 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 311 | }; |
| 312 | |
| 313 | vreg_l1b_1p8: ldo1 { |
| 314 | regulator-name = "vreg_l1b_1p8"; |
| 315 | regulator-min-microvolt = <1800000>; |
| 316 | regulator-max-microvolt = <1800000>; |
| 317 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 318 | }; |
| 319 | |
| 320 | vreg_l2b_3p0: ldo2 { |
| 321 | regulator-name = "vreg_l2b_3p0"; |
| 322 | regulator-min-microvolt = <3008000>; |
| 323 | regulator-max-microvolt = <3008000>; |
| 324 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 325 | }; |
| 326 | |
| 327 | vreg_l5b_3p1: ldo5 { |
| 328 | regulator-name = "vreg_l5b_3p1"; |
| 329 | regulator-min-microvolt = <3104000>; |
| 330 | regulator-max-microvolt = <3104000>; |
| 331 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 332 | }; |
| 333 | |
| 334 | vreg_l6b_1p8: ldo6 { |
| 335 | regulator-name = "vreg_l6b_1p8"; |
| 336 | regulator-min-microvolt = <1800000>; |
| 337 | regulator-max-microvolt = <3008000>; |
| 338 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 339 | }; |
| 340 | |
| 341 | vreg_l7b_1p8: ldo7 { |
| 342 | regulator-name = "vreg_l7b_1p8"; |
| 343 | regulator-min-microvolt = <1800000>; |
| 344 | regulator-max-microvolt = <3008000>; |
| 345 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 346 | }; |
| 347 | |
| 348 | vreg_l8b_1p8: ldo8 { |
| 349 | regulator-name = "vreg_l8b_1p8"; |
| 350 | regulator-min-microvolt = <1800000>; |
| 351 | regulator-max-microvolt = <3008000>; |
| 352 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 353 | }; |
| 354 | |
| 355 | vreg_l9b_2p9: ldo9 { |
| 356 | regulator-name = "vreg_l9b_2p9"; |
| 357 | regulator-min-microvolt = <2960000>; |
| 358 | regulator-max-microvolt = <3008000>; |
| 359 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 360 | }; |
| 361 | |
| 362 | vreg_l11b_1p2: ldo11 { |
| 363 | regulator-name = "vreg_l11b_1p2"; |
| 364 | regulator-min-microvolt = <1200000>; |
| 365 | regulator-max-microvolt = <1504000>; |
| 366 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 367 | }; |
| 368 | |
| 369 | vreg_l12b_1p8: ldo12 { |
| 370 | regulator-name = "vreg_l12b_1p8"; |
| 371 | regulator-min-microvolt = <1800000>; |
| 372 | regulator-max-microvolt = <1800000>; |
| 373 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 374 | }; |
| 375 | |
| 376 | vreg_l13b_3p0: ldo13 { |
| 377 | regulator-name = "vreg_l13b_3p0"; |
| 378 | regulator-min-microvolt = <3000000>; |
| 379 | regulator-max-microvolt = <3000000>; |
| 380 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 381 | }; |
| 382 | |
| 383 | vreg_l14b_3p2: ldo14 { |
| 384 | regulator-name = "vreg_l14b_3p2"; |
| 385 | regulator-min-microvolt = <3200000>; |
| 386 | regulator-max-microvolt = <3200000>; |
| 387 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 388 | }; |
| 389 | |
| 390 | vreg_l15b_1p8: ldo15 { |
| 391 | regulator-name = "vreg_l15b_1p8"; |
| 392 | regulator-min-microvolt = <1800000>; |
| 393 | regulator-max-microvolt = <1800000>; |
| 394 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 395 | }; |
| 396 | |
| 397 | vreg_l16b_2p8: ldo16 { |
| 398 | regulator-name = "vreg_l16b_2p8"; |
| 399 | regulator-min-microvolt = <2800000>; |
| 400 | regulator-max-microvolt = <2800000>; |
| 401 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 402 | }; |
| 403 | |
| 404 | vreg_l17b_2p5: ldo17 { |
| 405 | regulator-name = "vreg_l17b_2p5"; |
| 406 | regulator-min-microvolt = <2504000>; |
| 407 | regulator-max-microvolt = <2504000>; |
| 408 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 409 | }; |
| 410 | }; |
| 411 | |
| 412 | regulators-1 { |
| 413 | compatible = "qcom,pm8550vs-rpmh-regulators"; |
| 414 | qcom,pmic-id = "c"; |
| 415 | |
| 416 | vdd-l1-supply = <&vreg_s4g_1p25>; |
| 417 | vdd-l2-supply = <&vreg_s4e_0p95>; |
| 418 | vdd-l3-supply = <&vreg_s4e_0p95>; |
| 419 | |
| 420 | vreg_l3c_0p9: ldo3 { |
| 421 | regulator-name = "vreg_l3c_0p9"; |
| 422 | regulator-min-microvolt = <880000>; |
| 423 | regulator-max-microvolt = <912000>; |
| 424 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 425 | }; |
| 426 | }; |
| 427 | |
| 428 | regulators-2 { |
| 429 | compatible = "qcom,pm8550vs-rpmh-regulators"; |
| 430 | qcom,pmic-id = "d"; |
| 431 | |
| 432 | vdd-l1-supply = <&vreg_s4e_0p95>; |
| 433 | vdd-l2-supply = <&vreg_s4e_0p95>; |
| 434 | vdd-l3-supply = <&vreg_s4e_0p95>; |
| 435 | |
| 436 | vreg_l1d_0p88: ldo1 { |
| 437 | regulator-name = "vreg_l1d_0p88"; |
| 438 | regulator-min-microvolt = <880000>; |
| 439 | regulator-max-microvolt = <920000>; |
| 440 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 441 | }; |
| 442 | |
| 443 | /* ldo2 supplies SM8550 VDD_LPI_MX */ |
| 444 | }; |
| 445 | |
| 446 | regulators-3 { |
| 447 | compatible = "qcom,pm8550vs-rpmh-regulators"; |
| 448 | qcom,pmic-id = "e"; |
| 449 | |
| 450 | vdd-l1-supply = <&vreg_s4e_0p95>; |
| 451 | vdd-l2-supply = <&vreg_s4e_0p95>; |
| 452 | vdd-l3-supply = <&vreg_s4g_1p25>; |
| 453 | vdd-s4-supply = <&vph_pwr>; |
| 454 | vdd-s5-supply = <&vph_pwr>; |
| 455 | |
| 456 | vreg_s4e_0p95: smps4 { |
| 457 | regulator-name = "vreg_s4e_0p95"; |
| 458 | regulator-min-microvolt = <904000>; |
| 459 | regulator-max-microvolt = <984000>; |
| 460 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 461 | }; |
| 462 | |
| 463 | vreg_s5e_1p08: smps5 { |
| 464 | regulator-name = "vreg_s5e_1p08"; |
| 465 | regulator-min-microvolt = <1080000>; |
| 466 | regulator-max-microvolt = <1120000>; |
| 467 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 468 | }; |
| 469 | |
| 470 | vreg_l1e_0p88: ldo1 { |
| 471 | regulator-name = "vreg_l1e_0p88"; |
| 472 | regulator-min-microvolt = <880000>; |
| 473 | regulator-max-microvolt = <880000>; |
| 474 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 475 | }; |
| 476 | |
| 477 | vreg_l2e_0p9: ldo2 { |
| 478 | regulator-name = "vreg_l2e_0p9"; |
| 479 | regulator-min-microvolt = <904000>; |
| 480 | regulator-max-microvolt = <970000>; |
| 481 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 482 | }; |
| 483 | |
| 484 | vreg_l3e_1p2: ldo3 { |
| 485 | regulator-name = "vreg_l3e_1p2"; |
| 486 | regulator-min-microvolt = <1200000>; |
| 487 | regulator-max-microvolt = <1200000>; |
| 488 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 489 | }; |
| 490 | }; |
| 491 | |
| 492 | regulators-4 { |
| 493 | compatible = "qcom,pm8550ve-rpmh-regulators"; |
| 494 | qcom,pmic-id = "f"; |
| 495 | |
| 496 | vdd-l1-supply = <&vreg_s4e_0p95>; |
| 497 | vdd-l2-supply = <&vreg_s4e_0p95>; |
| 498 | vdd-l3-supply = <&vreg_s4e_0p95>; |
| 499 | vdd-s4-supply = <&vph_pwr>; |
| 500 | |
| 501 | vreg_s4f_0p5: smps4 { |
| 502 | regulator-name = "vreg_s4f_0p5"; |
| 503 | regulator-min-microvolt = <500000>; |
| 504 | regulator-max-microvolt = <700000>; |
| 505 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 506 | }; |
| 507 | |
| 508 | vreg_l1f_0p9: ldo1 { |
| 509 | regulator-name = "vreg_l1f_0p9"; |
| 510 | regulator-min-microvolt = <912000>; |
| 511 | regulator-max-microvolt = <912000>; |
| 512 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 513 | }; |
| 514 | |
| 515 | vreg_l2f_0p88: ldo2 { |
| 516 | regulator-name = "vreg_l2f_0p88"; |
| 517 | regulator-min-microvolt = <880000>; |
| 518 | regulator-max-microvolt = <912000>; |
| 519 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 520 | }; |
| 521 | |
| 522 | vreg_l3f_0p88: ldo3 { |
| 523 | regulator-name = "vreg_l3f_0p88"; |
| 524 | regulator-min-microvolt = <880000>; |
| 525 | regulator-max-microvolt = <912000>; |
| 526 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 527 | }; |
| 528 | }; |
| 529 | |
| 530 | regulators-5 { |
| 531 | compatible = "qcom,pm8550vs-rpmh-regulators"; |
| 532 | qcom,pmic-id = "g"; |
| 533 | |
| 534 | vdd-l1-supply = <&vreg_s4g_1p25>; |
| 535 | vdd-l2-supply = <&vreg_s4g_1p25>; |
| 536 | vdd-l3-supply = <&vreg_s4g_1p25>; |
| 537 | vdd-s1-supply = <&vph_pwr>; |
| 538 | vdd-s2-supply = <&vph_pwr>; |
| 539 | vdd-s3-supply = <&vph_pwr>; |
| 540 | vdd-s4-supply = <&vph_pwr>; |
| 541 | vdd-s5-supply = <&vph_pwr>; |
| 542 | vdd-s6-supply = <&vph_pwr>; |
| 543 | |
| 544 | vreg_s1g_1p25: smps1 { |
| 545 | regulator-name = "vreg_s1g_1p25"; |
| 546 | regulator-min-microvolt = <1200000>; |
| 547 | regulator-max-microvolt = <1300000>; |
| 548 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 549 | }; |
| 550 | |
| 551 | vreg_s2g_0p85: smps2 { |
| 552 | regulator-name = "vreg_s2g_0p85"; |
| 553 | regulator-min-microvolt = <800000>; |
| 554 | regulator-max-microvolt = <1000000>; |
| 555 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 556 | }; |
| 557 | |
| 558 | vreg_s3g_0p8: smps3 { |
| 559 | regulator-name = "vreg_s3g_0p8"; |
| 560 | regulator-min-microvolt = <300000>; |
| 561 | regulator-max-microvolt = <1004000>; |
| 562 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 563 | }; |
| 564 | |
| 565 | vreg_s4g_1p25: smps4 { |
| 566 | regulator-name = "vreg_s4g_1p25"; |
| 567 | regulator-min-microvolt = <1200000>; |
| 568 | regulator-max-microvolt = <1352000>; |
| 569 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 570 | }; |
| 571 | |
| 572 | vreg_s5g_0p85: smps5 { |
| 573 | regulator-name = "vreg_s5g_0p85"; |
| 574 | regulator-min-microvolt = <500000>; |
| 575 | regulator-max-microvolt = <1004000>; |
| 576 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 577 | }; |
| 578 | |
| 579 | vreg_s6g_1p86: smps6 { |
| 580 | regulator-name = "vreg_s6g_1p86"; |
| 581 | regulator-min-microvolt = <1800000>; |
| 582 | regulator-max-microvolt = <2000000>; |
| 583 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 584 | }; |
| 585 | |
| 586 | vreg_l1g_1p2: ldo1 { |
| 587 | regulator-name = "vreg_l1g_1p2"; |
| 588 | regulator-min-microvolt = <1200000>; |
| 589 | regulator-max-microvolt = <1200000>; |
| 590 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 591 | }; |
| 592 | |
| 593 | vreg_l3g_1p2: ldo3 { |
| 594 | regulator-name = "vreg_l3g_1p2"; |
| 595 | regulator-min-microvolt = <1200000>; |
| 596 | regulator-max-microvolt = <1200000>; |
| 597 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 598 | }; |
| 599 | }; |
Tom Rini | 93743d2 | 2024-04-01 09:08:13 -0400 | [diff] [blame] | 600 | |
| 601 | regulators-6 { |
| 602 | compatible = "qcom,pm8010-rpmh-regulators"; |
| 603 | qcom,pmic-id = "m"; |
| 604 | |
| 605 | vdd-l1-l2-supply = <&vreg_s4g_1p25>; |
| 606 | vdd-l3-l4-supply = <&vreg_bob2>; |
| 607 | vdd-l5-supply = <&vreg_s6g_1p86>; |
| 608 | vdd-l6-supply = <&vreg_s6g_1p86>; |
| 609 | vdd-l7-supply = <&vreg_bob1>; |
| 610 | |
| 611 | vreg_l1m_1p056: ldo1 { |
| 612 | regulator-name = "vreg_l1m_1p056"; |
| 613 | regulator-min-microvolt = <1056000>; |
| 614 | regulator-max-microvolt = <1056000>; |
| 615 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 616 | }; |
| 617 | |
| 618 | vreg_l2m_1p056: ldo2 { |
| 619 | regulator-name = "vreg_l2m_1p056"; |
| 620 | regulator-min-microvolt = <1056000>; |
| 621 | regulator-max-microvolt = <1056000>; |
| 622 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 623 | }; |
| 624 | |
| 625 | vreg_l3m_2p8: ldo3 { |
| 626 | regulator-name = "vreg_l3m_2p8"; |
| 627 | regulator-min-microvolt = <2800000>; |
| 628 | regulator-max-microvolt = <2800000>; |
| 629 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 630 | }; |
| 631 | |
| 632 | vreg_l4m_2p8: ldo4 { |
| 633 | regulator-name = "vreg_l4m_2p8"; |
| 634 | regulator-min-microvolt = <2800000>; |
| 635 | regulator-max-microvolt = <2800000>; |
| 636 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 637 | }; |
| 638 | |
| 639 | vreg_l5m_1p8: ldo5 { |
| 640 | regulator-name = "vreg_l5m_1p8"; |
| 641 | regulator-min-microvolt = <1800000>; |
| 642 | regulator-max-microvolt = <1800000>; |
| 643 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 644 | }; |
| 645 | |
| 646 | vreg_l6m_1p8: ldo6 { |
| 647 | regulator-name = "vreg_l6m_1p8"; |
| 648 | regulator-min-microvolt = <1800000>; |
| 649 | regulator-max-microvolt = <1800000>; |
| 650 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 651 | }; |
| 652 | |
| 653 | vreg_l7m_2p9: ldo7 { |
| 654 | regulator-name = "vreg_l7m_2p9"; |
| 655 | regulator-min-microvolt = <2800000>; |
| 656 | regulator-max-microvolt = <2904000>; |
| 657 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 658 | }; |
| 659 | }; |
| 660 | |
| 661 | regulators-7 { |
| 662 | compatible = "qcom,pm8010-rpmh-regulators"; |
| 663 | qcom,pmic-id = "n"; |
| 664 | |
| 665 | vdd-l1-l2-supply = <&vreg_s4g_1p25>; |
| 666 | vdd-l3-l4-supply = <&vreg_bob2>; |
| 667 | vdd-l5-supply = <&vreg_s6g_1p86>; |
| 668 | vdd-l6-supply = <&vreg_bob1>; |
| 669 | vdd-l7-supply = <&vreg_bob1>; |
| 670 | |
| 671 | vreg_l1n_1p1: ldo1 { |
| 672 | regulator-name = "vreg_l1n_1p1"; |
| 673 | regulator-min-microvolt = <1104000>; |
| 674 | regulator-max-microvolt = <1200000>; |
| 675 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 676 | }; |
| 677 | |
| 678 | vreg_l2n_1p1: ldo2 { |
| 679 | regulator-name = "vreg_l2n_1p1"; |
| 680 | regulator-min-microvolt = <1104000>; |
| 681 | regulator-max-microvolt = <1200000>; |
| 682 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 683 | }; |
| 684 | |
| 685 | vreg_l3n_2p8: ldo3 { |
| 686 | regulator-name = "vreg_l3n_2p8"; |
| 687 | regulator-min-microvolt = <2800000>; |
| 688 | regulator-max-microvolt = <3000000>; |
| 689 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 690 | }; |
| 691 | |
| 692 | vreg_l4n_2p8: ldo4 { |
| 693 | regulator-name = "vreg_l4n_2p8"; |
| 694 | regulator-min-microvolt = <2800000>; |
| 695 | regulator-max-microvolt = <3300000>; |
| 696 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 697 | }; |
| 698 | |
| 699 | vreg_l5n_1p8: ldo5 { |
| 700 | regulator-name = "vreg_l5n_1p8"; |
| 701 | regulator-min-microvolt = <1800000>; |
| 702 | regulator-max-microvolt = <1800000>; |
| 703 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 704 | }; |
| 705 | |
| 706 | vreg_l6n_3p3: ldo6 { |
| 707 | regulator-name = "vreg_l6n_3p3"; |
| 708 | regulator-min-microvolt = <2800000>; |
| 709 | regulator-max-microvolt = <3304000>; |
| 710 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 711 | }; |
| 712 | |
| 713 | vreg_l7n_2p96: ldo7 { |
| 714 | regulator-name = "vreg_l7n_2p96"; |
| 715 | regulator-min-microvolt = <2800000>; |
| 716 | regulator-max-microvolt = <2960000>; |
| 717 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 718 | }; |
| 719 | }; |
Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 720 | }; |
| 721 | |
| 722 | &i2c_master_hub_0 { |
| 723 | status = "okay"; |
| 724 | }; |
| 725 | |
| 726 | &i2c_hub_2 { |
| 727 | status = "okay"; |
| 728 | |
| 729 | typec-retimer@1c { |
| 730 | compatible = "onnn,nb7vpq904m"; |
| 731 | reg = <0x1c>; |
| 732 | |
| 733 | vcc-supply = <&vreg_l15b_1p8>; |
| 734 | |
| 735 | retimer-switch; |
| 736 | orientation-switch; |
| 737 | |
| 738 | ports { |
| 739 | #address-cells = <1>; |
| 740 | #size-cells = <0>; |
| 741 | |
| 742 | port@0 { |
| 743 | reg = <0>; |
| 744 | |
| 745 | redriver_ss_out: endpoint { |
| 746 | remote-endpoint = <&pmic_glink_ss_in>; |
| 747 | }; |
| 748 | }; |
| 749 | |
| 750 | port@1 { |
| 751 | reg = <1>; |
| 752 | |
| 753 | redriver_ss_in: endpoint { |
| 754 | data-lanes = <3 2 1 0>; |
| 755 | remote-endpoint = <&usb_dp_qmpphy_out>; |
| 756 | }; |
| 757 | }; |
| 758 | }; |
| 759 | }; |
| 760 | |
| 761 | typec-mux@42 { |
| 762 | compatible = "fcs,fsa4480"; |
| 763 | reg = <0x42>; |
| 764 | |
| 765 | vcc-supply = <&vreg_bob1>; |
| 766 | |
| 767 | mode-switch; |
| 768 | orientation-switch; |
| 769 | |
| 770 | port { |
| 771 | fsa4480_sbu_mux: endpoint { |
| 772 | remote-endpoint = <&pmic_glink_sbu>; |
| 773 | }; |
| 774 | }; |
| 775 | }; |
| 776 | }; |
| 777 | |
Tom Rini | 93743d2 | 2024-04-01 09:08:13 -0400 | [diff] [blame] | 778 | &ipa { |
| 779 | qcom,gsi-loader = "self"; |
| 780 | memory-region = <&ipa_fw_mem>; |
| 781 | firmware-name = "qcom/sm8550/ipa_fws.mbn"; |
| 782 | status = "okay"; |
| 783 | }; |
| 784 | |
Tom Rini | 6bb92fc | 2024-05-20 09:54:58 -0600 | [diff] [blame] | 785 | &gpi_dma1 { |
| 786 | status = "okay"; |
| 787 | }; |
| 788 | |
Tom Rini | 93743d2 | 2024-04-01 09:08:13 -0400 | [diff] [blame] | 789 | &gpu { |
| 790 | status = "okay"; |
| 791 | |
| 792 | zap-shader { |
| 793 | firmware-name = "qcom/sm8550/a740_zap.mbn"; |
| 794 | }; |
| 795 | }; |
| 796 | |
Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 797 | &lpass_tlmm { |
| 798 | spkr_1_sd_n_active: spkr-1-sd-n-active-state { |
| 799 | pins = "gpio17"; |
| 800 | function = "gpio"; |
| 801 | drive-strength = <16>; |
| 802 | bias-disable; |
| 803 | output-low; |
| 804 | }; |
| 805 | |
| 806 | spkr_2_sd_n_active: spkr-2-sd-n-active-state { |
| 807 | pins = "gpio18"; |
| 808 | function = "gpio"; |
| 809 | drive-strength = <16>; |
| 810 | bias-disable; |
| 811 | output-low; |
| 812 | }; |
| 813 | }; |
| 814 | |
| 815 | &mdss { |
| 816 | status = "okay"; |
| 817 | }; |
| 818 | |
| 819 | &mdss_dsi0 { |
| 820 | vdda-supply = <&vreg_l3e_1p2>; |
| 821 | status = "okay"; |
| 822 | |
| 823 | panel@0 { |
| 824 | compatible = "visionox,vtdr6130"; |
| 825 | reg = <0>; |
| 826 | |
| 827 | pinctrl-0 = <&sde_dsi_active>, <&sde_te_active>; |
| 828 | pinctrl-1 = <&sde_dsi_suspend>, <&sde_te_suspend>; |
| 829 | pinctrl-names = "default", "sleep"; |
| 830 | |
| 831 | vci-supply = <&vreg_l13b_3p0>; |
| 832 | vdd-supply = <&vreg_l11b_1p2>; |
| 833 | vddio-supply = <&vreg_l12b_1p8>; |
| 834 | |
| 835 | reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>; |
| 836 | |
| 837 | port { |
| 838 | panel0_in: endpoint { |
| 839 | remote-endpoint = <&mdss_dsi0_out>; |
| 840 | }; |
| 841 | }; |
| 842 | }; |
| 843 | }; |
| 844 | |
| 845 | &mdss_dsi0_out { |
| 846 | remote-endpoint = <&panel0_in>; |
| 847 | data-lanes = <0 1 2 3>; |
| 848 | }; |
| 849 | |
| 850 | &mdss_dsi0_phy { |
| 851 | vdds-supply = <&vreg_l1e_0p88>; |
| 852 | status = "okay"; |
| 853 | }; |
| 854 | |
| 855 | &mdss_dp0 { |
| 856 | status = "okay"; |
| 857 | }; |
| 858 | |
| 859 | &mdss_dp0_out { |
| 860 | data-lanes = <0 1>; |
Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 861 | }; |
| 862 | |
| 863 | &pcie0 { |
| 864 | wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; |
| 865 | perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; |
| 866 | |
| 867 | pinctrl-0 = <&pcie0_default_state>; |
| 868 | pinctrl-names = "default"; |
| 869 | |
| 870 | status = "okay"; |
| 871 | }; |
| 872 | |
Tom Rini | 6b642ac | 2024-10-01 12:20:28 -0600 | [diff] [blame^] | 873 | &pcieport0 { |
| 874 | wifi@0 { |
| 875 | compatible = "pci17cb,1107"; |
| 876 | reg = <0x10000 0x0 0x0 0x0 0x0>; |
| 877 | |
| 878 | vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; |
| 879 | vddaon-supply = <&vreg_pmu_aon_0p59>; |
| 880 | vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; |
| 881 | vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; |
| 882 | vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; |
| 883 | vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; |
| 884 | vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>; |
| 885 | vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>; |
| 886 | vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>; |
| 887 | }; |
| 888 | }; |
| 889 | |
Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 890 | &pcie0_phy { |
| 891 | vdda-phy-supply = <&vreg_l1e_0p88>; |
| 892 | vdda-pll-supply = <&vreg_l3e_1p2>; |
| 893 | |
| 894 | status = "okay"; |
| 895 | }; |
| 896 | |
| 897 | &pm8550_flash { |
| 898 | status = "okay"; |
| 899 | |
| 900 | led-0 { |
| 901 | function = LED_FUNCTION_FLASH; |
| 902 | color = <LED_COLOR_ID_YELLOW>; |
| 903 | led-sources = <1>, <4>; |
| 904 | led-max-microamp = <500000>; |
| 905 | flash-max-microamp = <2000000>; |
| 906 | flash-max-timeout-us = <1280000>; |
| 907 | function-enumerator = <0>; |
| 908 | }; |
| 909 | |
| 910 | led-1 { |
| 911 | function = LED_FUNCTION_FLASH; |
| 912 | color = <LED_COLOR_ID_WHITE>; |
| 913 | led-sources = <2>, <3>; |
| 914 | led-max-microamp = <500000>; |
| 915 | flash-max-microamp = <2000000>; |
| 916 | flash-max-timeout-us = <1280000>; |
| 917 | function-enumerator = <1>; |
| 918 | }; |
| 919 | }; |
| 920 | |
| 921 | &pm8550_gpios { |
| 922 | volume_up_n: volume-up-n-state { |
| 923 | pins = "gpio6"; |
| 924 | function = "normal"; |
| 925 | power-source = <1>; |
| 926 | bias-pull-up; |
| 927 | input-enable; |
| 928 | }; |
| 929 | }; |
| 930 | |
| 931 | &pm8550_pwm { |
| 932 | status = "okay"; |
| 933 | |
| 934 | multi-led { |
| 935 | color = <LED_COLOR_ID_RGB>; |
| 936 | function = LED_FUNCTION_STATUS; |
| 937 | |
| 938 | #address-cells = <1>; |
| 939 | #size-cells = <0>; |
| 940 | |
| 941 | led@1 { |
| 942 | reg = <1>; |
| 943 | color = <LED_COLOR_ID_RED>; |
| 944 | }; |
| 945 | |
| 946 | led@2 { |
| 947 | reg = <2>; |
| 948 | color = <LED_COLOR_ID_GREEN>; |
| 949 | }; |
| 950 | |
| 951 | led@3 { |
| 952 | reg = <3>; |
| 953 | color = <LED_COLOR_ID_BLUE>; |
| 954 | }; |
| 955 | }; |
| 956 | }; |
| 957 | |
| 958 | &pm8550b_eusb2_repeater { |
| 959 | vdd18-supply = <&vreg_l15b_1p8>; |
| 960 | vdd3-supply = <&vreg_l5b_3p1>; |
| 961 | }; |
| 962 | |
| 963 | &pon_pwrkey { |
| 964 | status = "okay"; |
| 965 | }; |
| 966 | |
| 967 | &pon_resin { |
| 968 | linux,code = <KEY_VOLUMEDOWN>; |
| 969 | |
| 970 | status = "okay"; |
| 971 | }; |
| 972 | |
Tom Rini | 6b642ac | 2024-10-01 12:20:28 -0600 | [diff] [blame^] | 973 | &pmk8550_gpios { |
| 974 | pmk8550_sleep_clk: sleep-clk-state { |
| 975 | pins = "gpio3"; |
| 976 | function = "func1"; |
| 977 | input-disable; |
| 978 | output-enable; |
| 979 | bias-disable; |
| 980 | power-source = <0>; |
| 981 | }; |
Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 982 | }; |
| 983 | |
| 984 | &qupv3_id_0 { |
| 985 | status = "okay"; |
| 986 | }; |
| 987 | |
| 988 | &qupv3_id_1 { |
| 989 | status = "okay"; |
| 990 | }; |
| 991 | |
| 992 | &remoteproc_adsp { |
| 993 | firmware-name = "qcom/sm8550/adsp.mbn", |
| 994 | "qcom/sm8550/adsp_dtb.mbn"; |
| 995 | status = "okay"; |
| 996 | }; |
| 997 | |
| 998 | &remoteproc_cdsp { |
| 999 | firmware-name = "qcom/sm8550/cdsp.mbn", |
| 1000 | "qcom/sm8550/cdsp_dtb.mbn"; |
| 1001 | status = "okay"; |
| 1002 | }; |
| 1003 | |
| 1004 | &remoteproc_mpss { |
| 1005 | firmware-name = "qcom/sm8550/modem.mbn", |
| 1006 | "qcom/sm8550/modem_dtb.mbn"; |
| 1007 | status = "okay"; |
| 1008 | }; |
| 1009 | |
| 1010 | &sleep_clk { |
| 1011 | clock-frequency = <32000>; |
| 1012 | }; |
| 1013 | |
| 1014 | &swr0 { |
| 1015 | status = "okay"; |
| 1016 | |
| 1017 | /* WSA8845, Speaker North */ |
| 1018 | north_spkr: speaker@0,0 { |
| 1019 | compatible = "sdw20217020400"; |
| 1020 | reg = <0 0>; |
| 1021 | pinctrl-names = "default"; |
| 1022 | pinctrl-0 = <&spkr_1_sd_n_active>; |
| 1023 | powerdown-gpios = <&lpass_tlmm 17 GPIO_ACTIVE_LOW>; |
| 1024 | #sound-dai-cells = <0>; |
| 1025 | sound-name-prefix = "SpkrLeft"; |
| 1026 | vdd-1p8-supply = <&vreg_l15b_1p8>; |
| 1027 | vdd-io-supply = <&vreg_l3g_1p2>; |
Tom Rini | 6b642ac | 2024-10-01 12:20:28 -0600 | [diff] [blame^] | 1028 | qcom,port-mapping = <1 2 3 7 10 13>; |
Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 1029 | }; |
| 1030 | |
| 1031 | /* WSA8845, Speaker South */ |
| 1032 | south_spkr: speaker@0,1 { |
| 1033 | compatible = "sdw20217020400"; |
| 1034 | reg = <0 1>; |
| 1035 | pinctrl-names = "default"; |
| 1036 | pinctrl-0 = <&spkr_2_sd_n_active>; |
| 1037 | powerdown-gpios = <&lpass_tlmm 18 GPIO_ACTIVE_LOW>; |
| 1038 | #sound-dai-cells = <0>; |
| 1039 | sound-name-prefix = "SpkrRight"; |
| 1040 | vdd-1p8-supply = <&vreg_l15b_1p8>; |
| 1041 | vdd-io-supply = <&vreg_l3g_1p2>; |
Tom Rini | 6b642ac | 2024-10-01 12:20:28 -0600 | [diff] [blame^] | 1042 | qcom,port-mapping = <4 5 6 7 11 13>; |
Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 1043 | }; |
| 1044 | }; |
| 1045 | |
Tom Rini | 6bb92fc | 2024-05-20 09:54:58 -0600 | [diff] [blame] | 1046 | &spi4 { |
| 1047 | status = "okay"; |
| 1048 | |
| 1049 | touchscreen@0 { |
| 1050 | compatible = "goodix,gt9916"; |
| 1051 | reg = <0>; |
| 1052 | |
| 1053 | interrupt-parent = <&tlmm>; |
| 1054 | interrupts = <25 IRQ_TYPE_LEVEL_LOW>; |
| 1055 | |
| 1056 | reset-gpios = <&tlmm 24 GPIO_ACTIVE_LOW>; |
| 1057 | |
| 1058 | avdd-supply = <&vreg_l14b_3p2>; |
| 1059 | |
| 1060 | spi-max-frequency = <1000000>; |
| 1061 | |
| 1062 | touchscreen-size-x = <1080>; |
| 1063 | touchscreen-size-y = <2400>; |
| 1064 | |
| 1065 | pinctrl-names = "default"; |
| 1066 | pinctrl-0 = <&ts_irq>, <&ts_reset>; |
| 1067 | }; |
| 1068 | }; |
| 1069 | |
Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 1070 | &swr1 { |
| 1071 | status = "okay"; |
| 1072 | |
| 1073 | /* WCD9385 RX */ |
| 1074 | wcd_rx: codec@0,4 { |
| 1075 | compatible = "sdw20217010d00"; |
| 1076 | reg = <0 4>; |
| 1077 | qcom,rx-port-mapping = <1 2 3 4 5>; |
| 1078 | }; |
| 1079 | }; |
| 1080 | |
| 1081 | &swr2 { |
| 1082 | status = "okay"; |
| 1083 | |
| 1084 | /* WCD9385 TX */ |
| 1085 | wcd_tx: codec@0,3 { |
| 1086 | compatible = "sdw20217010d00"; |
| 1087 | reg = <0 3>; |
Tom Rini | 6bb92fc | 2024-05-20 09:54:58 -0600 | [diff] [blame] | 1088 | qcom,tx-port-mapping = <2 2 3 4>; |
Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 1089 | }; |
| 1090 | }; |
| 1091 | |
| 1092 | &tlmm { |
| 1093 | gpio-reserved-ranges = <32 8>; |
| 1094 | |
| 1095 | bt_default: bt-default-state { |
| 1096 | bt-en-pins { |
| 1097 | pins = "gpio81"; |
| 1098 | function = "gpio"; |
| 1099 | drive-strength = <16>; |
| 1100 | bias-disable; |
| 1101 | }; |
| 1102 | |
| 1103 | sw-ctrl-pins { |
| 1104 | pins = "gpio82"; |
| 1105 | function = "gpio"; |
| 1106 | bias-pull-down; |
| 1107 | }; |
| 1108 | }; |
| 1109 | |
| 1110 | sde_dsi_active: sde-dsi-active-state { |
| 1111 | pins = "gpio133"; |
| 1112 | function = "gpio"; |
| 1113 | drive-strength = <8>; |
| 1114 | bias-disable; |
| 1115 | }; |
| 1116 | |
| 1117 | sde_dsi_suspend: sde-dsi-suspend-state { |
| 1118 | pins = "gpio133"; |
| 1119 | function = "gpio"; |
| 1120 | drive-strength = <2>; |
| 1121 | bias-pull-down; |
| 1122 | }; |
| 1123 | |
| 1124 | sde_te_active: sde-te-active-state { |
| 1125 | pins = "gpio86"; |
| 1126 | function = "mdp_vsync"; |
| 1127 | drive-strength = <2>; |
| 1128 | bias-pull-down; |
| 1129 | }; |
| 1130 | |
| 1131 | sde_te_suspend: sde-te-suspend-state { |
| 1132 | pins = "gpio86"; |
| 1133 | function = "mdp_vsync"; |
| 1134 | drive-strength = <2>; |
| 1135 | bias-pull-down; |
| 1136 | }; |
| 1137 | |
Tom Rini | 6bb92fc | 2024-05-20 09:54:58 -0600 | [diff] [blame] | 1138 | ts_irq: ts-irq-state { |
| 1139 | pins = "gpio25"; |
| 1140 | function = "gpio"; |
| 1141 | drive-strength = <8>; |
| 1142 | bias-pull-up; |
| 1143 | }; |
| 1144 | |
| 1145 | ts_reset: ts-reset-state { |
| 1146 | pins = "gpio24"; |
| 1147 | function = "gpio"; |
| 1148 | drive-strength = <8>; |
| 1149 | bias-pull-up; |
| 1150 | }; |
| 1151 | |
Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 1152 | wcd_default: wcd-reset-n-active-state { |
| 1153 | pins = "gpio108"; |
| 1154 | function = "gpio"; |
| 1155 | drive-strength = <16>; |
| 1156 | bias-disable; |
| 1157 | output-low; |
| 1158 | }; |
Tom Rini | 6b642ac | 2024-10-01 12:20:28 -0600 | [diff] [blame^] | 1159 | |
| 1160 | wlan_en: wlan-en-state { |
| 1161 | pins = "gpio80"; |
| 1162 | function = "gpio"; |
| 1163 | drive-strength = <8>; |
| 1164 | bias-pull-down; |
| 1165 | }; |
Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 1166 | }; |
| 1167 | |
| 1168 | &uart7 { |
| 1169 | status = "okay"; |
| 1170 | }; |
| 1171 | |
| 1172 | &uart14 { |
| 1173 | status = "okay"; |
| 1174 | |
| 1175 | bluetooth { |
| 1176 | compatible = "qcom,wcn7850-bt"; |
| 1177 | |
| 1178 | vddio-supply = <&vreg_l15b_1p8>; |
| 1179 | vddaon-supply = <&vreg_s4e_0p95>; |
| 1180 | vdddig-supply = <&vreg_s4e_0p95>; |
| 1181 | vddrfa0p8-supply = <&vreg_s4e_0p95>; |
| 1182 | vddrfa1p2-supply = <&vreg_s4g_1p25>; |
| 1183 | vddrfa1p9-supply = <&vreg_s6g_1p86>; |
| 1184 | |
| 1185 | max-speed = <3200000>; |
| 1186 | |
| 1187 | enable-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>; |
| 1188 | swctrl-gpios = <&tlmm 82 GPIO_ACTIVE_HIGH>; |
| 1189 | |
| 1190 | pinctrl-0 = <&bt_default>; |
| 1191 | pinctrl-names = "default"; |
| 1192 | }; |
| 1193 | }; |
| 1194 | |
| 1195 | &ufs_mem_hc { |
| 1196 | reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>; |
| 1197 | vcc-supply = <&vreg_l17b_2p5>; |
| 1198 | vcc-max-microamp = <1300000>; |
| 1199 | vccq-supply = <&vreg_l1g_1p2>; |
| 1200 | vccq-max-microamp = <1200000>; |
| 1201 | vdd-hba-supply = <&vreg_l3g_1p2>; |
| 1202 | |
| 1203 | status = "okay"; |
| 1204 | }; |
| 1205 | |
| 1206 | &ufs_mem_phy { |
| 1207 | vdda-phy-supply = <&vreg_l1d_0p88>; |
| 1208 | vdda-pll-supply = <&vreg_l3e_1p2>; |
| 1209 | |
| 1210 | status = "okay"; |
| 1211 | }; |
| 1212 | |
| 1213 | &usb_1 { |
| 1214 | status = "okay"; |
| 1215 | }; |
| 1216 | |
Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 1217 | &usb_1_dwc3_hs { |
| 1218 | remote-endpoint = <&pmic_glink_hs_in>; |
| 1219 | }; |
| 1220 | |
Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 1221 | &usb_1_hsphy { |
| 1222 | vdd-supply = <&vreg_l1e_0p88>; |
| 1223 | vdda12-supply = <&vreg_l3e_1p2>; |
| 1224 | |
| 1225 | phys = <&pm8550b_eusb2_repeater>; |
| 1226 | |
| 1227 | status = "okay"; |
| 1228 | }; |
| 1229 | |
| 1230 | &usb_dp_qmpphy { |
| 1231 | vdda-phy-supply = <&vreg_l3e_1p2>; |
| 1232 | vdda-pll-supply = <&vreg_l3f_0p88>; |
| 1233 | |
Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 1234 | status = "okay"; |
| 1235 | }; |
| 1236 | |
Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 1237 | &usb_dp_qmpphy_out { |
| 1238 | remote-endpoint = <&redriver_ss_in>; |
| 1239 | }; |
| 1240 | |
Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 1241 | &xo_board { |
| 1242 | clock-frequency = <76800000>; |
| 1243 | }; |