Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / 6b642aca7f571e777924f50732f530fd94b03bfb / . / src / arm64 / qcom / sm8450-sony-xperia-nagara-pdx223.dts
blob: daf2f91f356ebd1ae5856c076bbfe461921a4bdb [file] [log] [blame]
Tom Rini53633a82024-02-29 12:33:36 -0500[diff] [blame]1// SPDX-License-Identifier: BSD-3-Clause
2/*
3 * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org>
4 * Copyright (c) 2022, Linaro Limited
5 */
6
7/dts-v1/;
8
9#include "sm8450-sony-xperia-nagara.dtsi"
10
11/ {
12 model = "Sony Xperia 1 IV";
13 compatible = "sony,pdx223", "qcom,sm8450";
14
15 imx316_lvdd_regulator: imx316-lvdd-regulator {
16 compatible = "regulator-fixed";
17 regulator-name = "imx316_lvdd_regulator";
18 gpio = <&pm8350b_gpios 6 GPIO_ACTIVE_HIGH>;
19 enable-active-high;
20
21 pinctrl-names = "default";
22 pinctrl-0 = <&cam_pwr_ld_en>;
23 };
24
25 tcs3490_vdd_regulator: rgbcir-vdd-regulator {
26 compatible = "regulator-fixed";
27 regulator-name = "tcs3490_vdd_regulator";
28 gpio = <&pm8350c_gpios 6 GPIO_ACTIVE_HIGH>;
29 enable-active-high;
30
31 pinctrl-names = "default";
32 pinctrl-0 = <&rgbc_ir_pwr_en>;
33 };
34};
35
36&pm8350b_gpios {
37 gpio-line-names = "CAM_PWR_A_CS", /* GPIO_1 */
38 "NC",
39 "NC",
40 "NC",
41 "SNAPSHOT_N",
42 "CAM_PWR_LD_EN",
43 "NC",
44 "FOCUS_N";
45
46 cam_pwr_ld_en: cam-pwr-ld-en-state {
47 pins = "gpio6";
48 function = "normal";
49 qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
50 power-source = <0>;
51 drive-push-pull;
52 output-low;
53 };
54};
55
56&pm8350c_gpios {
57 gpio-line-names = "FL_STROBE_TRIG_WIDE", /* GPIO_1 */
58 "FL_STROBE_TRIG_TELE",
59 "WLC_ID",
60 "WLC_TXPWR_EN",
61 "NC",
62 "RGBC_IR_PWR_EN",
63 "NC",
64 "NC",
65 "WIDEC_PWR_EN";
66
67 rgbc_ir_pwr_en: rgbc-ir-pwr-en-state {
68 pins = "gpio6";
69 function = "normal";
70 qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
71 power-source = <1>;
72 drive-push-pull;
73 output-low;
74 };
75};
76
77&tlmm {
78 gpio-line-names = "NC", /* GPIO_0 */
79 "NC",
80 "NC",
81 "NC",
82 "WLC_I2C_SDA",
83 "WLC_I2C_SCL",
84 "NC",
85 "PM8010_1_RESET_N",
86 "WLC_INT_N",
87 "NC",
88 "NC", /* GPIO_10 */
89 "PM8010_2_RESET_N",
90 "DISP_ERR_FG",
91 "HALL_INT_N",
92 "ALS_PROX_INT_N",
93 "IMU1_INT",
94 "TS_I2C_SDA",
95 "TS_I2C_SCL",
96 "DISP_RESET_N",
97 "DISP_VDDR_EN",
98 "TS_RESET_N", /* GPIO_20 */
99 "TS_INT_N",
100 "NC",
101 "TELEC_PWR_EN",
102 "CAM1_RESET_N",
103 "LEO_CAM0_RESET_N",
104 "DEBUG_UART_TX",
105 "DEBUG_UART_RX",
106 "FP_SPI_MISO",
107 "FP_SPI_MOSI",
108 "FP_SPI_CLK", /* GPIO_30 */
109 "FP_SPI_CS_N",
110 "NFC_I2C_SDA",
111 "NFC_I2C_SCL",
112 "NFC_EN",
113 "NFC_CLK_REQ",
114 "NFC_ESE_SPI_MISO",
115 "NFC_ESE_SPI_MOSI",
116 "NFC_ESE_SPI_CLK",
117 "NFC_ESE_SPI_CS",
118 "FP_INT_N", /* GPIO_40 */
119 "NC",
120 "FP_RESET_N",
121 "WCD_RST_N",
122 "NC",
123 "NFC_DWL_REQ",
124 "NFC_IRQ",
125 "FORCE_USB_BOOT",
126 "APPS_I2C_1_SDA",
127 "APPS_I2C_1_SCL",
128 "SBU_SW_OE", /* GPIO_50 */
129 "SBU_SW_SEL",
130 "SPK_AMP_I2C_SDA",
131 "SPK_AMP_I2C_SCL",
132 "NC",
133 "NC",
134 "CAMSENSOR_I2C_SDA",
135 "CAMSENSOR_I2C_SCL",
136 "GNSS_ELNA_EN0",
137 "NC",
138 "NC", /* GPIO_60 */
139 "NC",
140 "NC",
141 "NC",
142 "NC",
143 "NC",
144 "RGBC_IR_INT",
145 "NC",
146 "NC",
147 "NC",
148 "NC", /* GPIO_70 */
149 "NC",
150 "HAP_I2C_SDA",
151 "HAP_I2C_SCL",
152 "HAP_RST_N",
153 "HAP_INT_N",
154 "HST_BT_UART_CTS",
155 "HST_BT_UART_RFR",
156 "HST_BT_UART_TX",
157 "HST_BT_UART_RX",
158 "HST_WLAN_EN", /* GPIO_80 */
159 "HST_BT_EN",
160 "HST_SW_CTRL",
161 "NC",
162 "NC",
163 "NC",
164 "DISP_VSYNC",
165 "NC",
166 "NC",
167 "HW_ID_0",
168 "HW_ID_1", /* GPIO_90 */
169 "USB_CC_DIR",
170 "TRAY_DET",
171 "SW_SERVICE",
172 "PCIE0_RESET_N",
173 "PCIE0_CLK_REQ_N",
174 "PCIE0_WAKE_N",
175 "OIS_ENABLE_WIDE",
176 "DEBUG_GPIO0",
177 "NC",
178 "CAM_MCLK0", /* GPIO_100 */
179 "CAM_MCLK1",
180 "CAM_MCLK2",
181 "CAM_MCLK3",
182 "NC",
183 "NC",
184 "TOF_RST_N",
185 "CAM_SOF",
186 "NC",
187 "AFEXPTMG_TELE",
188 "CCI_I2C0_SDA", /* GPIO_110 */
189 "CCI_I2C0_SCL",
190 "CCI_I2C1_SDA",
191 "CCI_I2C1_SCL",
192 "CCI_I2C2_SDA",
193 "CCI_I2C2_SCL",
194 "NC",
195 "CAM2_RESET_N",
196 "NC",
197 "EXT_VD0_XVS",
198 "CAM3_RESET_N", /* GPIO_120 */
199 "NC",
200 "NC",
201 "NC",
202 "NC",
203 "RF_ID_EXTENSION_2",
204 "HAP_I2S_CLK",
205 "HAP_I2S_DOUT",
206 "HAP_TRG1",
207 "HAP_I2S_SYNC",
208 "UIM1_DATA", /* GPIO_130 */
209 "UIM1_CLK",
210 "UIM1_RESET",
211 "TRAY_DET",
212 "UIM2_DATA",
213 "UIM2_CLK",
214 "UIM2_RESET",
215 "UIM2_PRESENT",
216 "SM_RFFE0_CLK",
217 "SM_RFFE0_DATA",
218 "SM_RFFE1_CLK", /* GPIO_140 */
219 "SM_RFFE1_DATA",
220 "SM_MSS_GRFC4",
221 "HST_AS_EN",
222 "LAA_RX_EN",
223 "NC",
224 "SM_RFFE4_CLK",
225 "SM_RFFE4_DATA",
226 "WLAN_COEX_UART1_RX",
227 "WLAN_COEX_UART1_TX",
228 "RF_LCD_ID_EN", /* GPIO_150 */
229 "RF_ID_EXTENSION",
230 "SM_MSS_GRFC12",
231 "NFC_COLD_RST",
232 "NC",
233 "NC",
234 "SDR1_QLINK0_REQ",
235 "SDR1_QLINK0_EN",
236 "SDR1_QLINK0_WMSS_RESET_N",
237 "QLINK1_REQ",
238 "QLINK1_EN", /* GPIO_160 */
239 "QLINK1_WMSS_RESET_N",
240 "SDR2_QLINK2_REQ",
241 "SDR2_QLINK2_EN",
242 "SDR2_QLINK2_WMSS_RESET_N",
243 "WCD_SWR_TX_CLK",
244 "WCD_SWR_TX_DATA0",
245 "WCD_SWR_TX_DATA1",
246 "WCD_SWR_RX_CLK",
247 "WCD_SWR_RX_DATA0",
248 "WCD_SWR_RX_DATA1", /* GPIO_170 */
249 "SM_DMIC1_CLK",
250 "SM_DMIC1_DATA",
251 "SM_DMIC2_CLK",
252 "SM_DMIC2_DATA",
253 "SPK_AMP_I2S_CLK",
254 "SPK_AMP_I2S_WS",
255 "NC",
256 "NC",
257 "WCD_SWR_TX_DATA2",
258 "SPK_AMP_I2S_ASP_DIN", /* GPIO_180 */
259 "SPK_AMP_I2S_ASP_DOUT",
260 "SPK_AMP_INT_N",
261 "SPK_AMP_RESET_N",
262 "HST_BT_WLAN_SLIMBUS_CLK",
263 "HST_BT_WLAN_SLIMBUS_DAT0",
264 "NC",
265 "NC",
266 "NC",
267 "NC",
268 "MAG_I2C_SDA", /* GPIO_190 */
269 "MAG_I2C_SCL",
270 "IMU_SPI_MISO",
271 "IMU_SPI_MOSI",
272 "IMU_SPI_CLK",
273 "IMU_SPI_CS_N",
274 "SENSOR_I2C_SDA",
275 "SENSOR_I2C_SCL",
276 "OIS_TELE_I2C_SDA",
277 "OIS_TELE_I2C_SCL",
278 "NC", /* GPIO_200 */
279 "OIS_ENABLE_TELE",
280 "HST_BLE_UART_TX",
281 "HST_BLE_UART_RX",
282 "HSTP_CLK_CFG_SEL",
283 "NC",
284 "APPS_I2C_0_SDA",
285 "APPS_I2C_0_SCL",
286 "CCI_I2C3_SDA",
287 "CCI_I2C3_SCL";
288};