Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / 6b642aca7f571e777924f50732f530fd94b03bfb / . / src / arm64 / qcom / sm6350-sony-xperia-lena-pdx213.dts
blob: bf23033a294e3f6e5f248d1d8114e52a70d17094 [file] [log] [blame]
Tom Rini53633a82024-02-29 12:33:36 -0500[diff] [blame]1// SPDX-License-Identifier: BSD-3-Clause
2/*
3 * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
4 */
5/dts-v1/;
6
7#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
8#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
9#include "sm6350.dtsi"
10#include "pm6350.dtsi"
11
12/ {
13 model = "Sony Xperia 10 III";
14 compatible = "sony,pdx213", "qcom,sm6350";
15 chassis-type = "handset";
16 qcom,msm-id = <434 0x10000>, <459 0x10000>;
17 qcom,board-id = <0x1000B 0>;
18
19 chosen {
20 #address-cells = <2>;
21 #size-cells = <2>;
22 ranges;
23
24 framebuffer: framebuffer@a0000000 {
25 compatible = "simple-framebuffer";
26 reg = <0 0xa0000000 0 0x2300000>;
27 width = <1080>;
28 height = <2520>;
29 stride = <(1080 * 4)>;
30 format = "a8r8g8b8";
31 clocks = <&gcc GCC_DISP_AXI_CLK>;
32 };
33 };
34
35 gpio-keys {
36 compatible = "gpio-keys";
37 pinctrl-names = "default";
38 pinctrl-0 = <&vol_down_n>;
39
40 key-volume-down {
41 label = "Volume Down";
42 linux,code = <KEY_VOLUMEDOWN>;
43 gpios = <&pm6350_gpios 2 GPIO_ACTIVE_LOW>;
44 };
45 };
46
47 touch_en_vreg: touch-en-regulator {
48 compatible = "regulator-fixed";
49 regulator-name = "touch_en_vreg";
50 gpio = <&tlmm 10 GPIO_ACTIVE_HIGH>;
51 enable-active-high;
52
53 vin-supply = <&pm6350_l6>;
54 };
55};
56
57&apps_rsc {
58 regulators-0 {
59 compatible = "qcom,pm6350-rpmh-regulators";
60 qcom,pmic-id = "a";
61
62 pm6350_s1: smps1 {
63 regulator-min-microvolt = <1000000>;
64 regulator-max-microvolt = <1200000>;
65 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
66 };
67
68 pm6350_s2: smps2 {
69 regulator-min-microvolt = <1503000>;
70 regulator-max-microvolt = <2048000>;
71 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
72 };
73
74 pm6350_l2: ldo2 {
75 regulator-min-microvolt = <1503000>;
76 regulator-max-microvolt = <1980000>;
77 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
78 };
79
80 pm6350_l3: ldo3 {
81 regulator-min-microvolt = <2700000>;
82 regulator-max-microvolt = <3300000>;
83 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
84 };
85
86 pm6350_l4: ldo4 {
87 regulator-min-microvolt = <352000>;
88 regulator-max-microvolt = <801000>;
89 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
90 };
91
92 pm6350_l5: ldo5 {
93 regulator-min-microvolt = <1503000>;
94 regulator-max-microvolt = <1980000>;
95 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
96 };
97
98 pm6350_l6: ldo6 {
99 regulator-min-microvolt = <1710000>;
100 regulator-max-microvolt = <3544000>;
101 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
102 };
103
104 pm6350_l7: ldo7 {
105 regulator-min-microvolt = <1620000>;
106 regulator-max-microvolt = <1980000>;
107 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
108 };
109
110 pm6350_l8: ldo8 {
111 regulator-min-microvolt = <2500000>;
112 regulator-max-microvolt = <3544000>;
113 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
114 };
115
116 pm6350_l9: ldo9 {
117 regulator-min-microvolt = <1650000>;
118 regulator-max-microvolt = <3401000>;
119 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
120 };
121
122 pm6350_l11: ldo11 {
123 regulator-min-microvolt = <1800000>;
124 regulator-max-microvolt = <2000000>;
125 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
126 };
127
128 pm6350_l12: ldo12 {
129 regulator-min-microvolt = <1620000>;
130 regulator-max-microvolt = <1980000>;
131 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
132 };
133
134 pm6350_l13: ldo13 {
135 regulator-min-microvolt = <570000>;
136 regulator-max-microvolt = <650000>;
137 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
138 };
139
140 pm6350_l14: ldo14 {
141 regulator-min-microvolt = <1700000>;
142 regulator-max-microvolt = <1900000>;
143 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
144 };
145
146 pm6350_l15: ldo15 {
147 regulator-min-microvolt = <1100000>;
148 regulator-max-microvolt = <1305000>;
149 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
150 };
151
152 pm6350_l16: ldo16 {
153 regulator-min-microvolt = <830000>;
154 regulator-max-microvolt = <921000>;
155 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
156 };
157
158 pm6350_l18: ldo18 {
159 regulator-min-microvolt = <788000>;
160 regulator-max-microvolt = <1049000>;
161 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
162 };
163
164 pm6350_l19: ldo19 {
165 regulator-min-microvolt = <1080000>;
166 regulator-max-microvolt = <1305000>;
167 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
168 };
169
170 pm6350_l20: ldo20 {
171 regulator-min-microvolt = <530000>;
172 regulator-max-microvolt = <801000>;
173 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
174 };
175
176 pm6350_l21: ldo21 {
177 regulator-min-microvolt = <751000>;
178 regulator-max-microvolt = <825000>;
179 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
180 };
181
182 pm6350_l22: ldo22 {
183 regulator-min-microvolt = <1080000>;
184 regulator-max-microvolt = <1305000>;
185 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
186 };
187 };
188
189 regulators-1 {
190 compatible = "qcom,pm6150l-rpmh-regulators";
191 qcom,pmic-id = "e";
192
193 pm6150l_s8: smps8 {
194 regulator-min-microvolt = <313000>;
195 regulator-max-microvolt = <1395000>;
196 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
197 };
198
199 pm6150l_l1: ldo1 {
200 regulator-min-microvolt = <1620000>;
201 regulator-max-microvolt = <1980000>;
202 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
203 };
204
205 pm6150l_l2: ldo2 {
206 regulator-min-microvolt = <1170000>;
207 regulator-max-microvolt = <1305000>;
208 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
209 };
210
211 pm6150l_l3: ldo3 {
212 regulator-min-microvolt = <1100000>;
213 regulator-max-microvolt = <1299000>;
214 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
215 };
216
217 pm6150l_l4: ldo4 {
218 regulator-min-microvolt = <1620000>;
219 regulator-max-microvolt = <3300000>;
220 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
221 };
222
223 pm6150l_l5: ldo5 {
224 regulator-min-microvolt = <1620000>;
225 regulator-max-microvolt = <3300000>;
226 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
227 };
228
229 pm6150l_l6: ldo6 {
230 regulator-min-microvolt = <1700000>;
231 regulator-max-microvolt = <2950000>;
232 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
233 regulator-allow-set-load;
234 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
235 RPMH_REGULATOR_MODE_HPM>;
236 };
237
238 pm6150l_l7: ldo7 {
239 regulator-min-microvolt = <2700000>;
240 regulator-max-microvolt = <3544000>;
241 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
242 };
243
244 pm6150l_l8: ldo8 {
245 regulator-min-microvolt = <1620000>;
246 regulator-max-microvolt = <2000000>;
247 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
248 };
249
250 pm6150l_l9: ldo9 {
251 regulator-min-microvolt = <2700000>;
252 regulator-max-microvolt = <2960000>;
253 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
254 regulator-allow-set-load;
255 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
256 RPMH_REGULATOR_MODE_HPM>;
257 };
258
259 pm6150l_l10: ldo10 {
260 regulator-min-microvolt = <3000000>;
261 regulator-max-microvolt = <3401000>;
262 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
263 };
264
265 pm6150l_l11: ldo11 {
266 regulator-min-microvolt = <3000000>;
267 regulator-max-microvolt = <3401000>;
268 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
269 };
270
271 pm6150l_bob: bob {
272 regulator-min-microvolt = <1620000>;
273 regulator-max-microvolt = <5492000>;
274 regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
275 regulator-allow-bypass;
276 };
277 };
278};
279
280&gpi_dma0 {
281 status = "okay";
282};
283
284&gpi_dma1 {
285 status = "okay";
286};
287
288&i2c8 {
289 clock-frequency = <400000>;
290 status = "okay";
291
292 touchscreen@48 {
293 compatible = "samsung,s6sy761";
294 reg = <0x48>;
295 interrupt-parent = <&tlmm>;
Tom Rini6b642ac2024-10-01 12:20:28 -0600[diff] [blame^]296 interrupts = <22 IRQ_TYPE_LEVEL_LOW>;
Tom Rini53633a82024-02-29 12:33:36 -0500[diff] [blame]297 vdd-supply = <&pm6350_l11>;
298 avdd-supply = <&touch_en_vreg>;
299
300 pinctrl-names = "default";
301 pinctrl-0 = <&ts_int_default &ts_active>;
302 };
303};
304
305&pm6350_gpios {
306 vol_down_n: vol-down-n-state {
307 pins = "gpio2";
308 function = PMIC_GPIO_FUNC_NORMAL;
309 power-source = <0>;
310 bias-disable;
311 input-enable;
312 };
313};
314
315&pm6350_resin {
316 linux,code = <KEY_VOLUMEUP>;
317 status = "okay";
318};
319
320&qupv3_id_0 {
321 status = "okay";
322};
323
324&qupv3_id_1 {
325 status = "okay";
326};
327
328&sdc2_off_state {
329 sd-cd-pins {
330 pins = "gpio94";
331 function = "gpio";
332 drive-strength = <2>;
333 bias-disable;
334 };
335};
336
337&sdc2_on_state {
338 sd-cd-pins {
339 pins = "gpio94";
340 function = "gpio";
341 drive-strength = <2>;
342 bias-pull-up;
343 };
344};
345
346&sdhc_2 {
347 status = "okay";
348
349 vmmc-supply = <&pm6150l_l9>;
350 vqmmc-supply = <&pm6150l_l6>;
351
352 cd-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>;
353};
354
355&tlmm {
356 gpio-reserved-ranges = <13 4>, <45 2>, <56 2>;
357
358 ts_active: ts-active-state {
359 pins = "gpio21";
360 function = "gpio";
361 drive-strength = <8>;
362 bias-pull-up;
363 };
364
365 ts_int_default: ts-int-default-state {
366 pins = "gpio22";
367 function = "gpio";
368 drive-strength = <2>;
369 bias-disable;
370 };
371};
372
373&usb_1 {
374 status = "okay";
375};
376
377&usb_1_dwc3 {
Tom Rini6b642ac2024-10-01 12:20:28 -0600[diff] [blame^]378 /delete-property/ usb-role-switch;
Tom Rini53633a82024-02-29 12:33:36 -0500[diff] [blame]379 maximum-speed = "super-speed";
380 dr_mode = "peripheral";
381};
382
383&usb_1_hsphy {
384 status = "okay";
385};
386
387&usb_1_qmpphy {
388 status = "okay";
389};