Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 1 | // SPDX-License-Identifier: BSD-3-Clause |
| 2 | /* |
| 3 | * Copyright (c) 2023, Linaro Limited |
| 4 | */ |
| 5 | |
| 6 | #include <dt-bindings/input/input.h> |
| 7 | #include <dt-bindings/spmi/spmi.h> |
| 8 | |
| 9 | / { |
| 10 | thermal-zones { |
| 11 | pmm8654au_0_thermal: pm8775-0-thermal { |
| 12 | polling-delay-passive = <100>; |
Tom Rini | 6b642ac | 2024-10-01 12:20:28 -0600 | [diff] [blame^] | 13 | |
Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 14 | thermal-sensors = <&pmm8654au_0_temp_alarm>; |
| 15 | |
| 16 | trips { |
| 17 | trip0 { |
| 18 | temperature = <105000>; |
| 19 | hysteresis = <0>; |
| 20 | type = "passive"; |
| 21 | }; |
| 22 | |
| 23 | trip1 { |
| 24 | temperature = <125000>; |
| 25 | hysteresis = <0>; |
| 26 | type = "critical"; |
| 27 | }; |
| 28 | }; |
| 29 | }; |
| 30 | |
| 31 | pmm8654au_1_thermal: pm8775-1-thermal { |
| 32 | polling-delay-passive = <100>; |
Tom Rini | 6b642ac | 2024-10-01 12:20:28 -0600 | [diff] [blame^] | 33 | |
Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 34 | thermal-sensors = <&pmm8654au_1_temp_alarm>; |
| 35 | |
| 36 | trips { |
| 37 | trip0 { |
| 38 | temperature = <105000>; |
| 39 | hysteresis = <0>; |
| 40 | type = "passive"; |
| 41 | }; |
| 42 | |
| 43 | trip1 { |
| 44 | temperature = <125000>; |
| 45 | hysteresis = <0>; |
| 46 | type = "critical"; |
| 47 | }; |
| 48 | }; |
| 49 | }; |
| 50 | |
| 51 | pmm8654au_2_thermal: pm8775-2-thermal { |
| 52 | polling-delay-passive = <100>; |
Tom Rini | 6b642ac | 2024-10-01 12:20:28 -0600 | [diff] [blame^] | 53 | |
Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 54 | thermal-sensors = <&pmm8654au_2_temp_alarm>; |
| 55 | |
| 56 | trips { |
| 57 | trip0 { |
| 58 | temperature = <105000>; |
| 59 | hysteresis = <0>; |
| 60 | type = "passive"; |
| 61 | }; |
| 62 | |
| 63 | trip1 { |
| 64 | temperature = <125000>; |
| 65 | hysteresis = <0>; |
| 66 | type = "critical"; |
| 67 | }; |
| 68 | }; |
| 69 | }; |
| 70 | |
| 71 | pmm8654au_3_thermal: pm8775-3-thermal { |
| 72 | polling-delay-passive = <100>; |
Tom Rini | 6b642ac | 2024-10-01 12:20:28 -0600 | [diff] [blame^] | 73 | |
Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 74 | thermal-sensors = <&pmm8654au_3_temp_alarm>; |
| 75 | |
| 76 | trips { |
| 77 | trip0 { |
| 78 | temperature = <105000>; |
| 79 | hysteresis = <0>; |
| 80 | type = "passive"; |
| 81 | }; |
| 82 | |
| 83 | trip1 { |
| 84 | temperature = <125000>; |
| 85 | hysteresis = <0>; |
| 86 | type = "critical"; |
| 87 | }; |
| 88 | }; |
| 89 | }; |
| 90 | }; |
| 91 | |
| 92 | reboot-mode { |
| 93 | compatible = "nvmem-reboot-mode"; |
| 94 | nvmem-cells = <&reboot_reason>; |
| 95 | nvmem-cell-names = "reboot-mode"; |
| 96 | mode-recovery = <0x01>; |
| 97 | mode-bootloader = <0x02>; |
| 98 | }; |
| 99 | }; |
| 100 | |
| 101 | &spmi_bus { |
| 102 | pmm8654au_0: pmic@0 { |
| 103 | compatible = "qcom,pmm8654au", "qcom,spmi-pmic"; |
| 104 | reg = <0x0 SPMI_USID>; |
| 105 | #address-cells = <1>; |
| 106 | #size-cells = <0>; |
| 107 | |
| 108 | pmm8654au_0_temp_alarm: temp-alarm@a00 { |
| 109 | compatible = "qcom,spmi-temp-alarm"; |
| 110 | reg = <0xa00>; |
| 111 | interrupts-extended = <&spmi_bus 0x0 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; |
| 112 | #thermal-sensor-cells = <0>; |
| 113 | }; |
| 114 | |
| 115 | pmm8654au_0_pon: pon@1200 { |
| 116 | compatible = "qcom,pmk8350-pon"; |
| 117 | reg = <0x1200>, <0x800>; |
| 118 | reg-names = "hlos", "pbs"; |
| 119 | |
| 120 | pmm8654au_0_pon_pwrkey: pwrkey { |
| 121 | compatible = "qcom,pmk8350-pwrkey"; |
| 122 | interrupts-extended = <&spmi_bus 0x0 0x12 0x7 IRQ_TYPE_EDGE_BOTH>; |
| 123 | linux,code = <KEY_POWER>; |
| 124 | debounce = <15625>; |
| 125 | }; |
| 126 | |
| 127 | pmm8654au_0_pon_resin: resin { |
| 128 | compatible = "qcom,pmk8350-resin"; |
| 129 | interrupts-extended = <&spmi_bus 0x0 0x12 0x6 IRQ_TYPE_EDGE_BOTH>; |
| 130 | debounce = <15625>; |
| 131 | status = "disabled"; |
| 132 | }; |
| 133 | }; |
| 134 | |
| 135 | pmm8654au_0_gpios: gpio@8800 { |
| 136 | compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio"; |
| 137 | reg = <0x8800>; |
| 138 | gpio-controller; |
| 139 | gpio-ranges = <&pmm8654au_0_gpios 0 0 12>; |
| 140 | #gpio-cells = <2>; |
| 141 | interrupt-controller; |
| 142 | #interrupt-cells = <2>; |
| 143 | }; |
| 144 | |
| 145 | pmm8654au_0_sdam_0: nvram@7100 { |
| 146 | compatible = "qcom,spmi-sdam"; |
| 147 | reg = <0x7100>; |
| 148 | #address-cells = <1>; |
| 149 | #size-cells = <1>; |
| 150 | ranges = <0 0x7100 0x100>; |
| 151 | |
| 152 | reboot_reason: reboot-reason@48 { |
| 153 | reg = <0x48 0x1>; |
| 154 | bits = <1 7>; |
| 155 | }; |
| 156 | }; |
| 157 | }; |
| 158 | |
| 159 | pmm8654au_1: pmic@2 { |
| 160 | compatible = "qcom,pmm8654au", "qcom,spmi-pmic"; |
| 161 | reg = <0x2 SPMI_USID>; |
| 162 | #address-cells = <1>; |
| 163 | #size-cells = <0>; |
| 164 | |
| 165 | pmm8654au_1_temp_alarm: temp-alarm@a00 { |
| 166 | compatible = "qcom,spmi-temp-alarm"; |
| 167 | reg = <0xa00>; |
| 168 | interrupts-extended = <&spmi_bus 0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; |
| 169 | #thermal-sensor-cells = <0>; |
| 170 | }; |
| 171 | |
| 172 | pmm8654au_1_gpios: gpio@8800 { |
| 173 | compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio"; |
| 174 | reg = <0x8800>; |
| 175 | gpio-controller; |
| 176 | gpio-ranges = <&pmm8654au_1_gpios 0 0 12>; |
| 177 | #gpio-cells = <2>; |
| 178 | interrupt-controller; |
| 179 | #interrupt-cells = <2>; |
| 180 | }; |
| 181 | }; |
| 182 | |
| 183 | pmm8654au_2: pmic@4 { |
| 184 | compatible = "qcom,pmm8654au", "qcom,spmi-pmic"; |
| 185 | reg = <0x4 SPMI_USID>; |
| 186 | #address-cells = <1>; |
| 187 | #size-cells = <0>; |
| 188 | |
| 189 | pmm8654au_2_temp_alarm: temp-alarm@a00 { |
| 190 | compatible = "qcom,spmi-temp-alarm"; |
| 191 | reg = <0xa00>; |
| 192 | interrupts-extended = <&spmi_bus 0x4 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; |
| 193 | #thermal-sensor-cells = <0>; |
| 194 | }; |
| 195 | |
| 196 | pmm8654au_2_gpios: gpio@8800 { |
| 197 | compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio"; |
| 198 | reg = <0x8800>; |
| 199 | gpio-controller; |
| 200 | gpio-ranges = <&pmm8654au_2_gpios 0 0 12>; |
| 201 | #gpio-cells = <2>; |
| 202 | interrupt-controller; |
| 203 | #interrupt-cells = <2>; |
| 204 | }; |
| 205 | }; |
| 206 | |
| 207 | pmm8654au_3: pmic@6 { |
| 208 | compatible = "qcom,pmm8654au", "qcom,spmi-pmic"; |
| 209 | reg = <0x6 SPMI_USID>; |
| 210 | #address-cells = <1>; |
| 211 | #size-cells = <0>; |
| 212 | |
| 213 | pmm8654au_3_temp_alarm: temp-alarm@a00 { |
| 214 | compatible = "qcom,spmi-temp-alarm"; |
| 215 | reg = <0xa00>; |
| 216 | interrupts-extended = <&spmi_bus 0x6 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; |
| 217 | #thermal-sensor-cells = <0>; |
| 218 | }; |
| 219 | |
| 220 | pmm8654au_3_gpios: gpio@8800 { |
| 221 | compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio"; |
| 222 | reg = <0x8800>; |
| 223 | gpio-controller; |
| 224 | gpio-ranges = <&pmm8654au_3_gpios 0 0 12>; |
| 225 | #gpio-cells = <2>; |
| 226 | interrupt-controller; |
| 227 | #interrupt-cells = <2>; |
| 228 | }; |
| 229 | }; |
| 230 | }; |