blob: ec5589fc69bde6574e521fc91f499c6cc86ddb95 [file] [log] [blame]
Tom Rini6b642ac2024-10-01 12:20:28 -06001// SPDX-License-Identifier: GPL-2.0-only
2
3/dts-v1/;
4
5#include "msm8916-motorola-common.dtsi"
6
7/ {
8 model = "Motorola Moto G 2015";
9 compatible = "motorola,osprey", "qcom,msm8916";
10 chassis-type = "handset";
11
12 reg_touch_vdda: regulator-touch-vdda {
13 compatible = "regulator-fixed";
14 regulator-name = "touch_vdda";
15 gpio = <&tlmm 114 GPIO_ACTIVE_HIGH>;
16 enable-active-high;
17 pinctrl-0 = <&touch_vdda_default>;
18 pinctrl-names = "default";
19 startup-delay-us = <300>;
20 vin-supply = <&pm8916_l16>;
21 };
22};
23
24&blsp_i2c1 {
25 status = "okay";
26
27 battery@36 {
28 compatible = "maxim,max17050";
29 reg = <0x36>;
30
31 interrupts-extended = <&tlmm 49 IRQ_TYPE_EDGE_FALLING>;
32
33 pinctrl-0 = <&battery_alert_default>;
34 pinctrl-names = "default";
35
36 maxim,rsns-microohm = <10000>;
37 maxim,over-heat-temp = <600>;
38 maxim,cold-temp = <(-200)>;
39 maxim,dead-volt = <3200>;
40 maxim,over-volt = <4500>;
41
42 };
43};
44
45&blsp_i2c6 {
46 /* magnetometer@c */
47};
48
49&pm8916_codec {
50 qcom,micbias1-ext-cap;
51 qcom,micbias2-ext-cap;
52};
53
54&sdhc_2 {
55 pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
56 pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
57 pinctrl-names = "default", "sleep";
58
59 cd-gpios = <&tlmm 25 GPIO_ACTIVE_LOW>;
60};
61
62&sound {
63 audio-routing =
64 "AMIC1", "MIC BIAS External1",
65 "AMIC3", "MIC BIAS External1";
66};
67
68&touchscreen {
69 interrupts-extended = <&tlmm 21 IRQ_TYPE_EDGE_FALLING>;
70
71 vdd-supply = <&reg_touch_vdda>;
72
73 pinctrl-0 = <&ts_int_default>;
74 pinctrl-names = "default";
75};
76
77&tlmm {
78 battery_alert_default: battery-alert-default-state {
79 pins = "gpio49";
80 function = "gpio";
81 drive-strength = <2>;
82 bias-pull-up;
83 };
84
85 sdc2_cd_default: sdc2-cd-default-state {
86 pins = "gpio25";
87 function = "gpio";
88 drive-strength = <2>;
89 bias-disable;
90 };
91
92 ts_int_default: ts-int-default-state {
93 pins = "gpio21";
94 function = "gpio";
95 drive-strength = <2>;
96 bias-disable;
97 };
98
99 touch_vdda_default: touch-vdda-default-state {
100 pins = "gpio114";
101 function = "gpio";
102 drive-strength = <2>;
103 bias-disable;
104 };
105};