Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / 6b642aca7f571e777924f50732f530fd94b03bfb / . / src / arm64 / freescale / imx8mp-tqma8mpql-mba8mpxl.dts
blob: ae64731266f35e9a2be8cdff95d87dbcab36e161 [file] [log] [blame]
Tom Rini53633a82024-02-29 12:33:36 -0500[diff] [blame]1// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2/*
3 * Copyright 2021-2022 TQ-Systems GmbH
4 * Author: Alexander Stein <alexander.stein@tq-group.com>
5 */
6
7/dts-v1/;
8
9#include <dt-bindings/leds/common.h>
10#include <dt-bindings/net/ti-dp83867.h>
11#include <dt-bindings/phy/phy-imx8-pcie.h>
12#include <dt-bindings/pwm/pwm.h>
13#include "imx8mp-tqma8mpql.dtsi"
14
15/ {
16 model = "TQ-Systems i.MX8MPlus TQMa8MPxL on MBa8MPxL";
17 compatible = "tq,imx8mp-tqma8mpql-mba8mpxl", "tq,imx8mp-tqma8mpql", "fsl,imx8mp";
Tom Rini93743d22024-04-01 09:08:13 -0400[diff] [blame]18 chassis-type = "embedded";
Tom Rini53633a82024-02-29 12:33:36 -0500[diff] [blame]19
20 chosen {
21 stdout-path = &uart4;
22 };
23
24 iio-hwmon {
25 compatible = "iio-hwmon";
26 io-channels = <&adc 0>, <&adc 1>;
27 };
28
29 aliases {
30 mmc0 = &usdhc3;
31 mmc1 = &usdhc2;
32 mmc2 = &usdhc1;
33 rtc0 = &pcf85063;
34 rtc1 = &snvs_rtc;
35 spi0 = &flexspi;
36 spi1 = &ecspi1;
37 spi2 = &ecspi2;
38 spi3 = &ecspi3;
39 };
40
41 backlight_lvds: backlight {
42 compatible = "pwm-backlight";
43 pinctrl-names = "default";
44 pinctrl-0 = <&pinctrl_backlight>;
45 pwms = <&pwm2 0 5000000 0>;
46 brightness-levels = <0 4 8 16 32 64 128 255>;
47 default-brightness-level = <7>;
48 power-supply = <&reg_vcc_12v0>;
49 enable-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
50 status = "disabled";
51 };
52
53 clk_xtal25: clk-xtal25 {
54 compatible = "fixed-clock";
55 #clock-cells = <0>;
56 clock-frequency = <25000000>;
57 };
58
Tom Rini93743d22024-04-01 09:08:13 -0400[diff] [blame]59 connector {
60 compatible = "gpio-usb-b-connector", "usb-b-connector";
61 type = "micro";
62 label = "X29";
63 pinctrl-names = "default";
64 pinctrl-0 = <&pinctrl_usbcon0>;
65 id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
66
67 port {
68 usb_dr_connector: endpoint {
69 remote-endpoint = <&usb3_dwc>;
70 };
71 };
72 };
73
Tom Rini53633a82024-02-29 12:33:36 -0500[diff] [blame]74 fan0: pwm-fan {
75 compatible = "pwm-fan";
76 pinctrl-names = "default";
77 pinctrl-0 = <&pinctrl_pwmfan>;
78 fan-supply = <&reg_pwm_fan>;
79 #cooling-cells = <2>;
80 /* typical 25 kHz -> 40.000 nsec */
81 pwms = <&pwm3 0 40000 PWM_POLARITY_INVERTED>;
82 cooling-levels = <0 32 64 128 196 240>;
83 pulses-per-revolution = <2>;
84 interrupt-parent = <&gpio5>;
85 interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
86 status = "disabled";
87 };
88
89 gpio-keys {
90 compatible = "gpio-keys";
91 pinctrl-names = "default";
92 pinctrl-0 = <&pinctrl_gpiobutton>;
93 autorepeat;
94
95 switch-1 {
96 label = "S12";
97 linux,code = <BTN_0>;
98 gpios = <&gpio5 27 GPIO_ACTIVE_LOW>;
99 wakeup-source;
100 };
101
102 switch-2 {
103 label = "S13";
104 linux,code = <BTN_1>;
105 gpios = <&gpio5 26 GPIO_ACTIVE_LOW>;
106 wakeup-source;
107 };
108 };
109
110 gpio-leds {
111 compatible = "gpio-leds";
112 pinctrl-names = "default";
113 pinctrl-0 = <&pinctrl_gpioled>;
114
115 led-0 {
116 color = <LED_COLOR_ID_GREEN>;
117 function = LED_FUNCTION_STATUS;
118 function-enumerator = <0>;
119 gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
120 linux,default-trigger = "default-on";
121 };
122
123 led-1 {
124 color = <LED_COLOR_ID_GREEN>;
125 function = LED_FUNCTION_HEARTBEAT;
126 gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
127 linux,default-trigger = "heartbeat";
128 };
129
130 led-2 {
131 color = <LED_COLOR_ID_YELLOW>;
132 function = LED_FUNCTION_STATUS;
133 function-enumerator = <1>;
134 gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>;
135 };
136 };
137
Tom Rini762f85b2024-07-20 11:15:10 -0600[diff] [blame]138 hdmi-connector {
139 compatible = "hdmi-connector";
140 label = "X44";
141 type = "a";
142
143 port {
144 hdmi_connector_in: endpoint {
145 remote-endpoint = <&hdmi_tx_out>;
146 };
147 };
148 };
149
Tom Rini53633a82024-02-29 12:33:36 -0500[diff] [blame]150 display: display {
151 /*
152 * Display is not fixed, so compatible has to be added from
153 * DT overlay
154 */
155 pinctrl-names = "default";
156 pinctrl-0 = <&pinctrl_lvdsdisplay>;
157 power-supply = <&reg_vcc_3v3>;
158 enable-gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
159 backlight = <&backlight_lvds>;
160 status = "disabled";
161 };
162
163 reg_pwm_fan: regulator-pwm-fan {
164 compatible = "regulator-fixed";
165 pinctrl-names = "default";
166 pinctrl-0 = <&pinctrl_regpwmfan>;
167 regulator-name = "FAN_PWR";
168 regulator-min-microvolt = <12000000>;
169 regulator-max-microvolt = <12000000>;
170 gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
171 enable-active-high;
172 vin-supply = <&reg_vcc_12v0>;
173 };
174
175 reg_usdhc2_vmmc: regulator-usdhc2 {
176 compatible = "regulator-fixed";
177 pinctrl-names = "default";
178 pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
179 regulator-name = "VSD_3V3";
180 regulator-min-microvolt = <3300000>;
181 regulator-max-microvolt = <3300000>;
182 gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
183 enable-active-high;
184 startup-delay-us = <100>;
185 off-on-delay-us = <12000>;
186 };
187
188 reg_vcc_12v0: regulator-12v0 {
189 compatible = "regulator-fixed";
190 pinctrl-names = "default";
191 pinctrl-0 = <&pinctrl_reg12v0>;
192 regulator-name = "VCC_12V0";
193 regulator-min-microvolt = <12000000>;
194 regulator-max-microvolt = <12000000>;
195 gpio = <&gpio2 6 GPIO_ACTIVE_HIGH>;
196 enable-active-high;
197 };
198
Tom Rini93743d22024-04-01 09:08:13 -0400[diff] [blame]199 reg_vcc_1v8: regulator-1v8 {
200 compatible = "regulator-fixed";
201 regulator-name = "VCC_1V8";
202 regulator-min-microvolt = <1800000>;
203 regulator-max-microvolt = <1800000>;
204 };
205
Tom Rini53633a82024-02-29 12:33:36 -0500[diff] [blame]206 reg_vcc_3v3: regulator-3v3 {
207 compatible = "regulator-fixed";
208 regulator-name = "VCC_3V3";
209 regulator-min-microvolt = <3300000>;
210 regulator-max-microvolt = <3300000>;
211 };
212
213 reg_vcc_5v0: regulator-5v0 {
214 compatible = "regulator-fixed";
215 regulator-name = "VCC_5V0";
216 regulator-min-microvolt = <5000000>;
217 regulator-max-microvolt = <5000000>;
218 };
219
220 reserved-memory {
221 #address-cells = <2>;
222 #size-cells = <2>;
223 ranges;
224
Tom Rini53633a82024-02-29 12:33:36 -0500[diff] [blame]225 /* global autoconfigured region for contiguous allocations */
226 linux,cma {
227 compatible = "shared-dma-pool";
228 reusable;
229 size = <0 0x38000000>;
230 alloc-ranges = <0 0x40000000 0 0xB0000000>;
231 linux,cma-default;
232 };
233 };
234
235 sound {
236 compatible = "fsl,imx-audio-tlv320aic32x4";
237 model = "tq-tlv320aic32x";
238 audio-cpu = <&sai3>;
239 audio-codec = <&tlv320aic3x04>;
240 };
241
242 thermal-zones {
243 soc-thermal {
244 trips {
245 soc_active0: trip-active0 {
246 temperature = <40000>;
247 hysteresis = <5000>;
248 type = "active";
249 };
250
251 soc_active1: trip-active1 {
252 temperature = <48000>;
253 hysteresis = <3000>;
254 type = "active";
255 };
256
257 soc_active2: trip-active2 {
258 temperature = <60000>;
259 hysteresis = <10000>;
260 type = "active";
261 };
262 };
263
264 cooling-maps {
265 map1 {
266 trip = <&soc_active0>;
267 cooling-device = <&fan0 1 1>;
268 };
269
270 map2 {
271 trip = <&soc_active1>;
272 cooling-device = <&fan0 2 2>;
273 };
274
275 map3 {
276 trip = <&soc_active2>;
277 cooling-device = <&fan0 3 3>;
278 };
279 };
280 };
281 };
282};
283
284&ecspi1 {
285 pinctrl-names = "default";
286 pinctrl-0 = <&pinctrl_ecspi1>;
287 cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
288 status = "okay";
289};
290
291&ecspi2 {
292 pinctrl-names = "default";
293 pinctrl-0 = <&pinctrl_ecspi2>;
294 cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
295 status = "okay";
296};
297
298&ecspi3 {
299 pinctrl-names = "default";
300 pinctrl-0 = <&pinctrl_ecspi3>;
301 cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>;
302 status = "okay";
303
304 adc: adc@0 {
305 reg = <0>;
306 compatible = "microchip,mcp3202";
307 /* 100 ksps * 18 */
308 spi-max-frequency = <1800000>;
309 vref-supply = <&reg_vcc_3v3>;
310 #io-channel-cells = <1>;
311 };
312};
313
314&eqos {
315 pinctrl-names = "default";
316 pinctrl-0 = <&pinctrl_eqos>, <&pinctrl_eqos_phy>;
317 phy-mode = "rgmii-id";
318 phy-handle = <&ethphy3>;
319 status = "okay";
320
321 mdio {
322 compatible = "snps,dwmac-mdio";
323 #address-cells = <1>;
324 #size-cells = <0>;
325
326 ethphy3: ethernet-phy@3 {
327 compatible = "ethernet-phy-ieee802.3-c22";
328 reg = <3>;
329 ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
330 ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
331 ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
332 ti,dp83867-rxctrl-strap-quirk;
333 ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
334 reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
335 reset-assert-us = <500000>;
336 reset-deassert-us = <50000>;
337 enet-phy-lane-no-swap;
338 interrupt-parent = <&gpio4>;
339 interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
340 };
341 };
342};
343
344&fec {
345 pinctrl-names = "default";
346 pinctrl-0 = <&pinctrl_fec>, <&pinctrl_fec_phy>;
347 phy-mode = "rgmii-id";
348 phy-handle = <&ethphy0>;
349 fsl,magic-packet;
350 status = "okay";
351
352 mdio {
353 #address-cells = <1>;
354 #size-cells = <0>;
355
356 ethphy0: ethernet-phy@0 {
357 compatible = "ethernet-phy-ieee802.3-c22";
358 reg = <0>;
359 ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
360 ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
361 ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
362 ti,dp83867-rxctrl-strap-quirk;
363 ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
364 reset-gpios = <&gpio4 0 GPIO_ACTIVE_LOW>;
365 reset-assert-us = <500000>;
366 reset-deassert-us = <50000>;
367 enet-phy-lane-no-swap;
368 interrupt-parent = <&gpio4>;
369 interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
370 };
371 };
372};
373
374&flexcan1 {
375 pinctrl-names = "default";
376 pinctrl-0 = <&pinctrl_flexcan1>;
377 xceiver-supply = <&reg_vcc_3v3>;
378 status = "okay";
379};
380
381&flexcan2 {
382 pinctrl-names = "default";
383 pinctrl-0 = <&pinctrl_flexcan2>;
384 xceiver-supply = <&reg_vcc_3v3>;
385 status = "okay";
386};
387
388&gpio1 {
389 pinctrl-names = "default";
390 pinctrl-0 = <&pinctrl_gpio1>;
391
392 gpio-line-names = "GPO1", "GPO0", "", "GPO3",
393 "", "", "GPO2", "GPI0",
394 "PMIC_IRQ", "GPI1", "OTG_ID", "USB_HUB_RST#",
395 "OTG_PWR", "", "GPI2", "GPI3",
396 "", "", "", "",
397 "", "", "", "",
398 "", "", "", "",
399 "", "", "", "";
400};
401
402&gpio2 {
403 pinctrl-names = "default";
404 pinctrl-0 = <&pinctrl_hoggpio2>;
405
406 gpio-line-names = "", "", "", "",
407 "", "", "VCC12V_EN", "PERST#",
408 "", "", "CLKREQ#", "PEWAKE#",
409 "USDHC2_CD", "", "", "",
410 "", "", "", "V_SD3V3_EN",
411 "", "", "", "",
412 "", "", "", "",
413 "", "", "", "";
414
415 perst-hog {
416 gpio-hog;
417 gpios = <7 0>;
418 output-high;
419 line-name = "PERST#";
420 };
421
422 clkreq-hog {
423 gpio-hog;
424 gpios = <10 0>;
425 input;
426 line-name = "CLKREQ#";
427 };
428
429 pewake-hog {
430 gpio-hog;
431 gpios = <11 0>;
432 input;
433 line-name = "PEWAKE#";
434 };
435};
436
437&gpio3 {
438 gpio-line-names = "", "", "", "",
439 "", "", "", "",
440 "", "", "", "",
441 "", "", "LVDS0_RESET#", "",
442 "", "", "", "LVDS0_BLT_EN",
443 "LVDS0_PWR_EN", "", "", "",
444 "", "", "", "",
445 "", "", "", "";
446};
447
448&gpio4 {
449 pinctrl-names = "default";
450 pinctrl-0 = <&pinctrl_gpio4>;
451
452 gpio-line-names = "ENET0_RST#", "ENET0_INT#", "ENET1_RST#", "ENET1_INT#",
453 "", "", "", "",
454 "", "", "", "",
455 "", "", "", "",
456 "", "", "DP_IRQ", "DSI_EN",
457 "HDMI_OC#", "TEMP_EVENT#", "PCIE_REFCLK_OE#", "",
458 "", "", "", "FAN_PWR",
459 "RTC_EVENT#", "CODEC_RST#", "", "";
460
461 pcie-refclkreq-hog {
462 gpio-hog;
463 gpios = <22 0>;
464 output-high;
465 line-name = "PCIE_REFCLK_OE#";
466 };
467};
468
469&gpio5 {
470 gpio-line-names = "", "", "", "LED2",
471 "LED1", "LED0", "CSI0_RESET#", "CSI0_SYNC",
472 "CSI0_TRIGGER", "CSI0_ENABLE", "", "",
473 "", "ECSPI2_SS0", "", "",
474 "", "", "", "",
475 "", "", "", "",
476 "", "ECSPI3_SS0", "SWITCH_A", "SWITCH_B",
477 "", "", "", "";
478};
479
Tom Rini762f85b2024-07-20 11:15:10 -0600[diff] [blame]480&hdmi_pvi {
481 status = "okay";
482};
483
484&hdmi_tx {
485 pinctrl-names = "default";
486 pinctrl-0 = <&pinctrl_hdmi>;
487 status = "okay";
488
489 ports {
490 port@1 {
491 hdmi_tx_out: endpoint {
492 remote-endpoint = <&hdmi_connector_in>;
493 };
494 };
495 };
496};
497
498&hdmi_tx_phy {
499 status = "okay";
500};
501
Tom Rini53633a82024-02-29 12:33:36 -0500[diff] [blame]502&i2c2 {
503 clock-frequency = <384000>;
504 pinctrl-names = "default", "gpio";
505 pinctrl-0 = <&pinctrl_i2c2>;
506 pinctrl-1 = <&pinctrl_i2c2_gpio>;
507 scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
508 sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
509 status = "okay";
510
511 tlv320aic3x04: audio-codec@18 {
512 compatible = "ti,tlv320aic32x4";
513 pinctrl-names = "default";
514 pinctrl-0 = <&pinctrl_tlv320aic3x04>;
515 reg = <0x18>;
516 clock-names = "mclk";
517 clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>;
518 reset-gpios = <&gpio4 29 GPIO_ACTIVE_LOW>;
Tom Rini93743d22024-04-01 09:08:13 -0400[diff] [blame]519 iov-supply = <&reg_vcc_1v8>;
Tom Rini53633a82024-02-29 12:33:36 -0500[diff] [blame]520 ldoin-supply = <&reg_vcc_3v3>;
521 };
522
523 se97_1c: temperature-sensor@1c {
524 compatible = "nxp,se97b", "jedec,jc-42.4-temp";
525 reg = <0x1c>;
526 };
527
528 at24c02_54: eeprom@54 {
529 compatible = "nxp,se97b", "atmel,24c02";
530 reg = <0x54>;
531 pagesize = <16>;
532 vcc-supply = <&reg_vcc_3v3>;
533 };
534
535 pcieclk: clock-generator@6a {
536 compatible = "renesas,9fgv0241";
537 reg = <0x6a>;
538 clocks = <&clk_xtal25>;
539 #clock-cells = <1>;
540 };
541};
542
543&i2c4 {
544 clock-frequency = <384000>;
545 pinctrl-names = "default", "gpio";
546 pinctrl-0 = <&pinctrl_i2c4>;
547 pinctrl-1 = <&pinctrl_i2c4_gpio>;
548 scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
549 sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
550 status = "okay";
551};
552
553&i2c6 {
554 clock-frequency = <384000>;
555 pinctrl-names = "default", "gpio";
556 pinctrl-0 = <&pinctrl_i2c6>;
557 pinctrl-1 = <&pinctrl_i2c6_gpio>;
558 scl-gpios = <&gpio2 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
559 sda-gpios = <&gpio2 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
560 status = "okay";
561};
562
Tom Rini762f85b2024-07-20 11:15:10 -0600[diff] [blame]563&lcdif3 {
564 status = "okay";
565};
566
Tom Rini53633a82024-02-29 12:33:36 -0500[diff] [blame]567&pcf85063 {
568 /* RTC_EVENT# is connected on MBa8MPxL */
569 pinctrl-names = "default";
570 pinctrl-0 = <&pinctrl_pcf85063>;
571 interrupt-parent = <&gpio4>;
572 interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
573};
574
575&pcie_phy {
576 fsl,clkreq-unsupported;
577 fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
578 clocks = <&pcieclk 0>;
579 clock-names = "ref";
580 status = "okay";
581};
582
583&pcie {
584 clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
585 <&clk IMX8MP_CLK_HSIO_AXI>,
586 <&clk IMX8MP_CLK_PCIE_ROOT>;
587 clock-names = "pcie", "pcie_bus", "pcie_aux";
588 assigned-clocks = <&clk IMX8MP_CLK_PCIE_AUX>;
589 assigned-clock-rates = <10000000>;
590 assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_50M>;
591 status = "okay";
592};
593
594&pwm2 {
595 pinctrl-names = "default";
596 pinctrl-0 = <&pinctrl_pwm2>;
597 status = "disabled";
598};
599
600&pwm3 {
601 pinctrl-names = "default";
602 pinctrl-0 = <&pinctrl_pwm3>;
603 status = "okay";
604};
605
606&sai3 {
607 pinctrl-names = "default";
608 pinctrl-0 = <&pinctrl_sai3>;
609 assigned-clocks = <&clk IMX8MP_CLK_SAI3>;
610 assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
611 assigned-clock-rates = <12288000>;
612 fsl,sai-mclk-direction-output;
613 status = "okay";
614};
615
616&snvs_pwrkey {
617 status = "okay";
618};
619
620&uart1 {
621 pinctrl-names = "default";
622 pinctrl-0 = <&pinctrl_uart1>;
623 assigned-clocks = <&clk IMX8MP_CLK_UART1>;
624 assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
625 status = "okay";
626};
627
628&uart2 {
629 pinctrl-names = "default";
630 pinctrl-0 = <&pinctrl_uart2>;
631 assigned-clocks = <&clk IMX8MP_CLK_UART2>;
632 assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
633 status = "okay";
634};
635
636&uart3 {
637 pinctrl-names = "default";
638 pinctrl-0 = <&pinctrl_uart3>;
639 assigned-clocks = <&clk IMX8MP_CLK_UART3>;
640 assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
641 status = "okay";
642};
643
644&uart4 {
645 /* console */
646 pinctrl-names = "default";
647 pinctrl-0 = <&pinctrl_uart4>;
648 status = "okay";
649};
650
651&usb3_0 {
652 pinctrl-names = "default";
653 pinctrl-0 = <&pinctrl_usb0>;
654 fsl,over-current-active-low;
655 status = "okay";
656};
657
658&usb3_1 {
659 fsl,disable-port-power-control;
660 fsl,permanently-attached;
Tom Rini53633a82024-02-29 12:33:36 -0500[diff] [blame]661 status = "okay";
662};
663
664&usb3_phy0 {
665 vbus-supply = <&reg_vcc_5v0>;
666 status = "okay";
667};
668
669&usb3_phy1 {
670 vbus-supply = <&reg_vcc_5v0>;
671 status = "okay";
672};
673
674&usb_dwc3_0 {
675 /* dual role is implemented, but not a full featured OTG */
676 hnp-disable;
677 srp-disable;
678 adp-disable;
679 dr_mode = "otg";
680 usb-role-switch;
681 role-switch-default-mode = "peripheral";
682 status = "okay";
683
Tom Rini93743d22024-04-01 09:08:13 -0400[diff] [blame]684 port {
685 usb3_dwc: endpoint {
686 remote-endpoint = <&usb_dr_connector>;
687 };
Tom Rini53633a82024-02-29 12:33:36 -0500[diff] [blame]688 };
689};
690
691&usb_dwc3_1 {
692 dr_mode = "host";
693 #address-cells = <1>;
694 #size-cells = <0>;
695 pinctrl-names = "default";
696 pinctrl-0 = <&pinctrl_usbhub>;
697 status = "okay";
698
699 hub_2_0: hub@1 {
700 compatible = "usb451,8142";
701 reg = <1>;
702 peer-hub = <&hub_3_0>;
703 reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
704 vdd-supply = <&reg_vcc_3v3>;
705 };
706
707 hub_3_0: hub@2 {
708 compatible = "usb451,8140";
709 reg = <2>;
710 peer-hub = <&hub_2_0>;
711 reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
712 vdd-supply = <&reg_vcc_3v3>;
713 };
714};
715
716&usdhc2 {
717 pinctrl-names = "default", "state_100mhz", "state_200mhz";
718 pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
719 pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
720 pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
721 cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
722 vmmc-supply = <&reg_usdhc2_vmmc>;
723 no-mmc;
724 no-sdio;
725 disable-wp;
726 bus-width = <4>;
727 status = "okay";
728};
729
730&iomuxc {
731 pinctrl_backlight: backlightgrp {
732 fsl,pins = <MX8MP_IOMUXC_SAI5_RXFS__GPIO3_IO19 0x14>;
733 };
734
735 pinctrl_flexcan1: flexcan1grp {
736 fsl,pins = <MX8MP_IOMUXC_SAI5_RXD1__CAN1_TX 0x150>,
737 <MX8MP_IOMUXC_SAI5_RXD2__CAN1_RX 0x150>;
738 };
739
740 pinctrl_flexcan2: flexcan2grp {
741 fsl,pins = <MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX 0x150>,
742 <MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX 0x150>;
743 };
744
745 /* only on X57, primary used as CSI0 control signals */
746 pinctrl_ecspi1: ecspi1grp {
747 fsl,pins = <MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO 0x1c0>,
748 <MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI 0x1c0>,
749 <MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK 0x1c0>,
750 <MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09 0x1c0>;
751 };
752
753 /* on X63 and optionally on X57, can also be used as CSI1 control signals */
754 pinctrl_ecspi2: ecspi2grp {
755 fsl,pins = <MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO 0x1c0>,
756 <MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI 0x1c0>,
757 <MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK 0x1c0>,
758 <MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13 0x1c0>;
759 };
760
761 pinctrl_ecspi3: ecspi3grp {
762 fsl,pins = <MX8MP_IOMUXC_UART1_TXD__ECSPI3_MOSI 0x1c0>,
763 <MX8MP_IOMUXC_UART1_RXD__ECSPI3_SCLK 0x1c0>,
764 <MX8MP_IOMUXC_UART2_RXD__ECSPI3_MISO 0x1c0>,
765 <MX8MP_IOMUXC_UART2_TXD__GPIO5_IO25 0x1c0>;
766 };
767
768 pinctrl_eqos: eqosgrp {
769 fsl,pins = <MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x40000044>,
770 <MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x40000044>,
771 <MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x90>,
772 <MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x90>,
773 <MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x90>,
774 <MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x90>,
775 <MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x90>,
776 <MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x90>,
777 <MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x12>,
778 <MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x12>,
779 <MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x12>,
780 <MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x12>,
781 <MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x12>,
782 <MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x14>;
783 };
784
785 pinctrl_eqos_event: eqosevtgrp {
786 fsl,pins = <MX8MP_IOMUXC_SAI2_RXD0__ENET_QOS_1588_EVENT2_OUT 0x100>,
787 <MX8MP_IOMUXC_SAI2_TXD0__ENET_QOS_1588_EVENT2_IN 0x1c0>;
788 };
789
790 pinctrl_eqos_phy: eqosphygrp {
791 fsl,pins = <MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02 0x100>,
792 <MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03 0x1c0>;
793 };
794
795 pinctrl_fec: fecgrp {
796 fsl,pins = <MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x40000044>,
797 <MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO 0x40000044>,
798 <MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x90>,
799 <MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x90>,
800 <MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x90>,
801 <MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x90>,
802 <MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x90>,
803 <MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x90>,
804 <MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x12>,
805 <MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x12>,
806 <MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x12>,
807 <MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x12>,
808 <MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x12>,
809 <MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x14>;
810 };
811
812 pinctrl_fec_event: fecevtgrp {
813 fsl,pins = <MX8MP_IOMUXC_SAI1_RXFS__ENET1_1588_EVENT0_IN 0x100>,
814 <MX8MP_IOMUXC_SAI1_RXC__ENET1_1588_EVENT0_OUT 0x1c0>;
815 };
816
817 pinctrl_fec_phy: fecphygrp {
818 fsl,pins = <MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00 0x100>,
819 <MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01 0x1c0>;
820 };
821
822 pinctrl_fec_phyalt: fecphyaltgrp {
823 fsl,pins = <MX8MP_IOMUXC_SAI2_TXFS__GPIO4_IO24 0x180>,
824 <MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25 0x180>;
825 };
826
827 pinctrl_gpiobutton: gpiobuttongrp {
828 fsl,pins = <MX8MP_IOMUXC_UART3_RXD__GPIO5_IO26 0x10>,
829 <MX8MP_IOMUXC_UART3_TXD__GPIO5_IO27 0x10>;
830 };
831
832 pinctrl_gpioled: gpioledgrp {
833 fsl,pins = <MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05 0x14>,
834 <MX8MP_IOMUXC_SPDIF_RX__GPIO5_IO04 0x14>,
835 <MX8MP_IOMUXC_SPDIF_TX__GPIO5_IO03 0x14>;
836 };
837
838 pinctrl_gpio1: gpio1grp {
839 fsl,pins = <MX8MP_IOMUXC_GPIO1_IO00__GPIO1_IO00 0x10>,
840 <MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01 0x10>,
841 <MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03 0x10>,
842 <MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06 0x10>,
843 <MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07 0x80>,
844 <MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09 0x80>,
845 <MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14 0x80>,
846 <MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15 0x80>;
847 };
848
849 pinctrl_gpio4: gpio4grp {
850 fsl,pins = <MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20 0x180>,
851 <MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22 0x180>;
852 };
853
854 pinctrl_hdmi: hdmigrp {
855 fsl,pins = <MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL 0x400001c2>,
856 <MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA 0x400001c2>,
857 <MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD 0x40000010>,
858 <MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC 0x40000010>;
859 };
860
861 pinctrl_hoggpio2: hoggpio2grp {
862 fsl,pins = <MX8MP_IOMUXC_SD1_DATA5__GPIO2_IO07 0x140>,
863 <MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10 0x140>,
864 <MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11 0x140>;
865 };
866
867 pinctrl_i2c2: i2c2grp {
868 fsl,pins = <MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001e2>,
869 <MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001e2>;
870 };
871
872 pinctrl_i2c2_gpio: i2c2-gpiogrp {
873 fsl,pins = <MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16 0x400001e2>,
874 <MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17 0x400001e2>;
875 };
876
877 pinctrl_i2c4: i2c4grp {
878 fsl,pins = <MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL 0x400001e2>,
879 <MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA 0x400001e2>;
880 };
881
882 pinctrl_i2c4_gpio: i2c4-gpiogrp {
883 fsl,pins = <MX8MP_IOMUXC_I2C4_SCL__GPIO5_IO20 0x400001e2>,
884 <MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21 0x400001e2>;
885 };
886
887 pinctrl_i2c6: i2c6grp {
888 fsl,pins = <MX8MP_IOMUXC_SD1_DATA0__I2C6_SCL 0x400001e2>,
889 <MX8MP_IOMUXC_SD1_DATA1__I2C6_SDA 0x400001e2>;
890 };
891
892 pinctrl_i2c6_gpio: i2c6-gpiogrp {
893 fsl,pins = <MX8MP_IOMUXC_SD1_DATA0__GPIO2_IO02 0x400001e2>,
894 <MX8MP_IOMUXC_SD1_DATA1__GPIO2_IO03 0x400001e2>;
895 };
896
897 pinctrl_lvdsdisplay: lvdsdisplaygrp {
898 fsl,pins = <MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20 0x10>; /* Power enable */
899 };
900
901 pinctrl_pcf85063: pcf85063grp {
902 fsl,pins = <MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28 0x80>;
903 };
904
905 /* LVDS Backlight */
906 pinctrl_pwm2: pwm2grp {
907 fsl,pins = <MX8MP_IOMUXC_SAI5_RXD0__PWM2_OUT 0x14>;
908 };
909
910 /* FAN */
911 pinctrl_pwm3: pwm3grp {
912 fsl,pins = <MX8MP_IOMUXC_I2C3_SDA__PWM3_OUT 0x14>;
913 };
914
915 pinctrl_pwmfan: pwmfangrp {
916 fsl,pins = <MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18 0x80>; /* FAN RPM */
917 };
918
919 pinctrl_reg12v0: reg12v0grp {
920 fsl,pins = <MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06 0x140>; /* VCC12V enable */
921 };
922
923 pinctrl_regpwmfan: regpwmfangrp {
924 fsl,pins = <MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27 0x80>;
925 };
926
927 pinctrl_sai3: sai3grp {
928 fsl,pins = <
929 MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC 0x94
930 MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK 0x94
931 MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00 0x94
932 MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00 0x94
933 MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI3_MCLK 0x94
934 >;
935 };
936
937 pinctrl_tlv320aic3x04: tlv320aic3x04grp {
938 fsl,pins = <
939 /* CODEC RST# */
940 MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29 0x180
941 >;
942 };
943
944 /* X61 */
945 pinctrl_uart1: uart1grp {
946 fsl,pins = <MX8MP_IOMUXC_SD1_CLK__UART1_DCE_TX 0x140>,
947 <MX8MP_IOMUXC_SD1_CMD__UART1_DCE_RX 0x140>;
948 };
949
950 /* X61 */
951 pinctrl_uart2: uart2grp {
952 fsl,pins = <MX8MP_IOMUXC_SD1_DATA2__UART2_DCE_TX 0x140>,
953 <MX8MP_IOMUXC_SD1_DATA3__UART2_DCE_RX 0x140>;
954 };
955
956 pinctrl_uart3: uart3grp {
957 fsl,pins = <MX8MP_IOMUXC_SD1_DATA6__UART3_DCE_TX 0x140>,
958 <MX8MP_IOMUXC_SD1_DATA7__UART3_DCE_RX 0x140>;
959 };
960
961 pinctrl_uart4: uart4grp {
962 fsl,pins = <MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX 0x140>,
963 <MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX 0x140>;
964 };
965
966 pinctrl_usb0: usb0grp {
967 fsl,pins = <MX8MP_IOMUXC_GPIO1_IO13__USB1_OTG_OC 0x1c0>,
968 <MX8MP_IOMUXC_GPIO1_IO12__USB1_OTG_PWR 0x1c0>;
969 };
970
971 pinctrl_usbcon0: usb0congrp {
972 fsl,pins = <MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10 0x1c0>;
973 };
974
975 pinctrl_usbhub: usbhubgrp {
976 fsl,pins = <MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11 0x10>;
977 };
978
979 pinctrl_usdhc2: usdhc2grp {
980 fsl,pins = <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x192>,
981 <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d2>,
982 <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d2>,
983 <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d2>,
984 <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d2>,
985 <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d2>,
986 <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0>;
987 };
988
989 pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
990 fsl,pins = <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194>,
991 <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4>,
992 <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4>,
993 <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4>,
994 <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4>,
995 <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4>,
996 <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0>;
997 };
998
999 pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
1000 fsl,pins = <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194>,
1001 <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4>,
1002 <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4>,
1003 <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4>,
1004 <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4>,
1005 <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4>,
1006 <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0>;
1007 };
1008
1009 pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
1010 fsl,pins = <MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x1c0>;
1011 };
1012};