blob: ae9b1b6e6b312b67841212042ec735ba00a60b40 [file] [log] [blame]
Przemyslaw Marczakafee81e2015-04-20 20:07:47 +02001MAXIM, MAX77686 regulators
2
3This device uses two drivers:
4- drivers/power/pmic/max77686.c (as parent I/O device)
5- drivers/power/regulator/max77686.c (for child regulators)
6
7This file describes the binding info for the REGULATOR driver.
8
9First, please read the binding info for the pmic:
10- doc/device-tree-bindings/pmic/max77686.txt
11
12Required subnode:
13- voltage-regulators: required for the PMIC driver
14
15Required properties:
16- regulator-name: used for regulator uclass platform data '.name'
17
18Optional:
19- regulator-min-microvolt: minimum allowed Voltage to set
20- regulator-max-microvolt: minimum allowed Voltage to set
21- regulator-always-on: regulator should be never disabled
22- regulator-boot-on: regulator should be enabled by the bootloader
23
24Example:
25(subnode of max77686 pmic node)
26voltage-regulators {
27 ldo1 {
28 regulator-name = "VDD_ALIVE_1.0V";
29 regulator-min-microvolt = <1000000>;
30 regulator-max-microvolt = <1000000>;
31 regulator-always-on;
32 regulator-boot-on;
33 };
34
35 ldo2 {
36 regulator-name = "VDDQ_VM1M2_1.2V";
37 regulator-min-microvolt = <1200000>;
38 regulator-max-microvolt = <1200000>;
39 regulator-always-on;
40 regulator-boot-on;
41 };
42 .
43 .
44 .
45 ldo26 {
46 regulator-name = "nc";
47 regulator-min-microvolt = <3000000>;
48 regulator-max-microvolt = <3000000>;
49 regulator-always-on;
50 regulator-boot-on;
51 };
52
53 buck1 {
54 regulator-compatible = "BUCK1";
55 regulator-name = "VDD_MIF_1.0V";
56 regulator-min-microvolt = <8500000>;
57 regulator-max-microvolt = <1100000>;
58 regulator-always-on;
59 regulator-boot-on;
60 };
61 .
62 .
63 .
64 buck9 {
65 regulator-compatible = "BUCK9";
66 regulator-name = "nc";
67 regulator-min-microvolt = <1200000>;
68 regulator-max-microvolt = <1200000>;
69 };
70};