blob: 6d47e28fc72b43dec058d4328be9ca56a6f1414f [file] [log] [blame]
Tom Rini10e47792018-05-06 17:58:06 -04001/* SPDX-License-Identifier: GPL-2.0+ */
Fabio Estevam1d97a592015-04-20 14:48:57 -03002/*
3 * Copyright (C) 2015 Freescale Semiconductor, Inc.
4 *
5 * Configuration settings for the SolidRun mx6 based boards
Fabio Estevam1d97a592015-04-20 14:48:57 -03006 */
7#ifndef __MX6CUBOXI_CONFIG_H
8#define __MX6CUBOXI_CONFIG_H
9
Fabio Estevam1d97a592015-04-20 14:48:57 -030010#include "mx6_common.h"
11
Fabio Estevam1d97a592015-04-20 14:48:57 -030012#include "imx6_spl.h"
13
Adrian Alonsoce08c362015-09-02 13:54:13 -050014#define CONFIG_IMX_THERMAL
Fabio Estevam1d97a592015-04-20 14:48:57 -030015
Fabio Estevam239fd312015-04-29 22:28:09 -030016#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)
Fabio Estevam1d97a592015-04-20 14:48:57 -030017#define CONFIG_MXC_UART
Fabio Estevam1d97a592015-04-20 14:48:57 -030018
19/* MMC Configs */
Fabio Estevam1d97a592015-04-20 14:48:57 -030020#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR
Fabio Estevam1d97a592015-04-20 14:48:57 -030021
Peter Robinson8576fbc2017-07-01 18:44:03 +010022/* SATA Configuration */
Peter Robinson8576fbc2017-07-01 18:44:03 +010023#ifdef CONFIG_CMD_SATA
Peter Robinson8576fbc2017-07-01 18:44:03 +010024#define CONFIG_SYS_SATA_MAX_DEVICE 1
25#define CONFIG_DWC_AHSATA_PORT_ID 0
26#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
27#define CONFIG_LBA48
Peter Robinson8576fbc2017-07-01 18:44:03 +010028#endif
29
Fabio Estevam1d97a592015-04-20 14:48:57 -030030/* Ethernet Configuration */
31#define CONFIG_FEC_MXC
Fabio Estevam1d97a592015-04-20 14:48:57 -030032#define IMX_FEC_BASE ENET_BASE_ADDR
33#define CONFIG_FEC_XCV_TYPE RGMII
34#define CONFIG_FEC_MXC_PHYADDR 0
Fabio Estevam1d97a592015-04-20 14:48:57 -030035#define CONFIG_PHY_ATHEROS
36
Fabio Estevam239fd312015-04-29 22:28:09 -030037/* Framebuffer */
Fabio Estevam239fd312015-04-29 22:28:09 -030038#define CONFIG_VIDEO_BMP_RLE8
39#define CONFIG_SPLASH_SCREEN
40#define CONFIG_SPLASH_SCREEN_ALIGN
41#define CONFIG_BMP_16BPP
42#define CONFIG_VIDEO_LOGO
43#define CONFIG_VIDEO_BMP_LOGO
44#define CONFIG_IMX_HDMI
45#define CONFIG_IMX_VIDEO_SKIP
46
Fabio Estevam729bbb82015-04-29 22:28:10 -030047/* USB */
Fabio Estevam729bbb82015-04-29 22:28:10 -030048#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
Fabio Estevam729bbb82015-04-29 22:28:10 -030049
Fabio Estevam1d97a592015-04-20 14:48:57 -030050/* Command definition */
Fabio Estevam1d97a592015-04-20 14:48:57 -030051
Fabio Estevam1d97a592015-04-20 14:48:57 -030052#define CONFIG_MXC_UART_BASE UART1_BASE
Simon Glass4694a742016-10-17 20:12:39 -060053#define CONSOLE_DEV "ttymxc0"
Fabio Estevam1d97a592015-04-20 14:48:57 -030054#define CONFIG_SYS_MMC_ENV_DEV 0 /* SDHC2 */
55
Vagrant Cascadian9ea3d812015-10-27 13:18:22 -070056#ifndef CONFIG_SPL_BUILD
Fabio Estevam1d97a592015-04-20 14:48:57 -030057#define CONFIG_EXTRA_ENV_SETTINGS \
Jon Nettletone368d842018-06-11 15:26:23 +030058 "som_rev=undefined\0" \
59 "has_emmc=undefined\0" \
Fabio Estevam9887c1a2015-04-25 18:47:21 -030060 "fdtfile=undefined\0" \
Fabio Estevamfa252172015-04-25 18:47:20 -030061 "fdt_addr_r=0x18000000\0" \
Vagrant Cascadian9ea3d812015-10-27 13:18:22 -070062 "fdt_addr=0x18000000\0" \
63 "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
64 "pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
65 "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
66 "ramdisk_addr_r=0x13000000\0" \
67 "ramdiskaddr=0x13000000\0" \
68 "initrd_high=0xffffffff\0" \
69 "fdt_high=0xffffffff\0" \
Fabio Estevam1d97a592015-04-20 14:48:57 -030070 "ip_dyn=yes\0" \
Vagrant Cascadianb9671f62017-03-31 13:48:44 -070071 "console=" CONSOLE_DEV ",115200\0" \
Fabio Estevam1d97a592015-04-20 14:48:57 -030072 "bootm_size=0x10000000\0" \
73 "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
Fabio Berton63e861b2017-07-10 17:04:10 -030074 "finduuid=part uuid mmc 0:1 uuid\0" \
Fabio Estevam1d97a592015-04-20 14:48:57 -030075 "update_sd_firmware=" \
76 "if test ${ip_dyn} = yes; then " \
77 "setenv get_cmd dhcp; " \
78 "else " \
79 "setenv get_cmd tftp; " \
80 "fi; " \
81 "if mmc dev ${mmcdev}; then " \
82 "if ${get_cmd} ${update_sd_firmware_filename}; then " \
83 "setexpr fw_sz ${filesize} / 0x200; " \
84 "setexpr fw_sz ${fw_sz} + 1; " \
85 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
86 "fi; " \
87 "fi\0" \
Fabio Estevam9887c1a2015-04-25 18:47:21 -030088 "findfdt="\
Jon Nettletone368d842018-06-11 15:26:23 +030089 "if test ${board_rev} = MX6Q; then " \
Jon Nettleton30cba092018-06-07 16:17:36 +030090 "setenv fdtprefix imx6q; fi; " \
Jon Nettletone368d842018-06-11 15:26:23 +030091 "if test ${board_rev} = MX6DL; then " \
Jon Nettleton30cba092018-06-07 16:17:36 +030092 "setenv fdtprefix imx6dl; fi; " \
Jon Nettletone368d842018-06-11 15:26:23 +030093 "if test ${som_rev} = V15; then " \
Jon Nettleton30cba092018-06-07 16:17:36 +030094 "setenv fdtsuffix -som-v15; fi; " \
Jon Nettletone368d842018-06-11 15:26:23 +030095 "if test ${has_emmc} = yes; then " \
96 "setenv emmcsuffix -emmc; fi; " \
97 "if test ${board_name} = HUMMINGBOARD2 ; then " \
98 "setenv fdtfile ${fdtprefix}-hummingboard2${emmcsuffix}${fdtsuffix}.dtb; fi; " \
99 "if test ${board_name} = HUMMINGBOARD ; then " \
100 "setenv fdtfile ${fdtprefix}-hummingboard${emmcsuffix}${fdtsuffix}.dtb; fi; " \
101 "if test ${board_name} = CUBOXI ; then " \
102 "setenv fdtfile ${fdtprefix}-cubox-i${emmcsuffix}${fdtsuffix}.dtb; fi; " \
103 "if test ${fdtfile} = undefined; then " \
Fabio Estevam9887c1a2015-04-25 18:47:21 -0300104 "echo WARNING: Could not determine dtb to use; fi; \0" \
Vagrant Cascadian9ea3d812015-10-27 13:18:22 -0700105 BOOTENV
Fabio Estevam1d97a592015-04-20 14:48:57 -0300106
Vagrant Cascadian9ea3d812015-10-27 13:18:22 -0700107#define BOOT_TARGET_DEVICES(func) \
Baruch Siach6d3f68c2019-11-10 14:38:07 +0200108 func(MMC, mmc, 1) \
109 func(MMC, mmc, 2) \
Peter Robinson8576fbc2017-07-01 18:44:03 +0100110 func(SATA, sata, 0) \
Vagrant Cascadian9ea3d812015-10-27 13:18:22 -0700111 func(USB, usb, 0) \
112 func(PXE, pxe, na) \
113 func(DHCP, dhcp, na)
114
Vagrant Cascadian9ea3d812015-10-27 13:18:22 -0700115#include <config_distro_bootcmd.h>
116
117#else
118#define CONFIG_EXTRA_ENV_SETTINGS
119#endif /* CONFIG_SPL_BUILD */
Fabio Estevam1d97a592015-04-20 14:48:57 -0300120
Fabio Estevam1d97a592015-04-20 14:48:57 -0300121/* Physical Memory Map */
Fabio Estevam1d97a592015-04-20 14:48:57 -0300122#define CONFIG_SYS_SDRAM_BASE MMDC0_ARB_BASE_ADDR
123#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
124#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
125
126#define CONFIG_SYS_INIT_SP_OFFSET \
127 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
128#define CONFIG_SYS_INIT_SP_ADDR \
129 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
130
131/* Environment organization */
Fabio Estevam1d97a592015-04-20 14:48:57 -0300132
Fabio Estevam1d97a592015-04-20 14:48:57 -0300133#endif /* __MX6CUBOXI_CONFIG_H */