blob: eaca57fc5dfe05efd65b49de70d6e51edf0cfff6 [file] [log] [blame]
Prabhakar Kushwaha768e1202013-09-12 11:11:28 +05301/*
2 * Copyright 2013 Freescale Semiconductor, Inc.
3 *
4 * SPDX-License-Identifier: GPL-2.0+
5 */
6
7#include <common.h>
8#include <command.h>
9#include <i2c.h>
10#include <netdev.h>
11#include <linux/compiler.h>
12#include <asm/mmu.h>
13#include <asm/processor.h>
14#include <asm/cache.h>
15#include <asm/immap_85xx.h>
16#include <asm/fsl_law.h>
17#include <asm/fsl_serdes.h>
18#include <asm/fsl_portals.h>
19#include <asm/fsl_liodn.h>
20#include <fm_eth.h>
Zhao Qiang433e0af2014-03-21 16:21:46 +080021#include <hwconfig.h>
Prabhakar Kushwaha768e1202013-09-12 11:11:28 +053022
tang yuantian10871092014-12-18 10:20:07 +080023#include "../common/sleep.h"
Prabhakar Kushwaha768e1202013-09-12 11:11:28 +053024#include "../common/qixis.h"
25#include "t1040qds.h"
26#include "t1040qds_qixis.h"
27
28DECLARE_GLOBAL_DATA_PTR;
29
30int checkboard(void)
31{
32 char buf[64];
33 u8 sw;
34 struct cpu_type *cpu = gd->arch.cpu;
35 static const char *const freq[] = {"100", "125", "156.25", "161.13",
36 "122.88", "122.88", "122.88"};
37 int clock;
38
39 printf("Board: %sQDS, ", cpu->name);
40 printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, ",
41 QIXIS_READ(id), QIXIS_READ(arch));
42
43 sw = QIXIS_READ(brdcfg[0]);
44 sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
45
46 if (sw < 0x8)
47 printf("vBank: %d\n", sw);
48 else if (sw == 0x8)
49 puts("PromJet\n");
50 else if (sw == 0x9)
51 puts("NAND\n");
52 else if (sw == 0x15)
53 printf("IFCCard\n");
54 else
55 printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH);
56
57 printf("FPGA: v%d (%s), build %d",
58 (int)QIXIS_READ(scver), qixis_read_tag(buf),
59 (int)qixis_read_minor());
60 /* the timestamp string contains "\n" at the end */
61 printf(" on %s", qixis_read_time(buf));
62
63 /*
64 * Display the actual SERDES reference clocks as configured by the
65 * dip switches on the board. Note that the SWx registers could
66 * technically be set to force the reference clocks to match the
67 * values that the SERDES expects (or vice versa). For now, however,
68 * we just display both values and hope the user notices when they
69 * don't match.
70 */
71 puts("SERDES Reference: ");
72 sw = QIXIS_READ(brdcfg[2]);
73 clock = (sw >> 6) & 3;
74 printf("Clock1=%sMHz ", freq[clock]);
75 clock = (sw >> 4) & 3;
76 printf("Clock2=%sMHz\n", freq[clock]);
77
78 return 0;
79}
80
81int select_i2c_ch_pca9547(u8 ch)
82{
83 int ret;
84
85 ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
86 if (ret) {
87 puts("PCA: failed to select proper channel\n");
88 return ret;
89 }
90
91 return 0;
92}
93
Zhao Qiang433e0af2014-03-21 16:21:46 +080094static void qe_board_setup(void)
95{
96 u8 brdcfg15, brdcfg9;
97
98 if (hwconfig("qe") && hwconfig("tdm")) {
99 brdcfg15 = QIXIS_READ(brdcfg[15]);
100 /*
101 * TDMRiser uses QE-TDM
102 * Route QE_TDM signals to TDM Riser slot
103 */
104 QIXIS_WRITE(brdcfg[15], brdcfg15 | 7);
105 } else if (hwconfig("qe") && hwconfig("uart")) {
106 brdcfg15 = QIXIS_READ(brdcfg[15]);
107 brdcfg9 = QIXIS_READ(brdcfg[9]);
108 /*
109 * Route QE_TDM signals to UCC
110 * ProfiBus controlled by UCC3
111 */
112 brdcfg15 &= 0xfc;
113 QIXIS_WRITE(brdcfg[15], brdcfg15 | 2);
114 QIXIS_WRITE(brdcfg[9], brdcfg9 | 4);
115 }
116}
117
tang yuantian10871092014-12-18 10:20:07 +0800118int board_early_init_f(void)
119{
120#if defined(CONFIG_DEEP_SLEEP)
121 if (is_warm_boot())
122 fsl_dp_disable_console();
123#endif
124
125 return 0;
126}
127
Prabhakar Kushwaha768e1202013-09-12 11:11:28 +0530128int board_early_init_r(void)
129{
130#ifdef CONFIG_SYS_FLASH_BASE
131 const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
York Sun220c3462014-06-24 21:16:20 -0700132 int flash_esel = find_tlb_idx((void *)flashbase, 1);
Prabhakar Kushwaha768e1202013-09-12 11:11:28 +0530133
134 /*
135 * Remap Boot flash + PROMJET region to caching-inhibited
136 * so that flash can be erased properly.
137 */
138
139 /* Flush d-cache and invalidate i-cache of any FLASH data */
140 flush_dcache();
141 invalidate_icache();
142
York Sun220c3462014-06-24 21:16:20 -0700143 if (flash_esel == -1) {
144 /* very unlikely unless something is messed up */
145 puts("Error: Could not find TLB for FLASH BASE\n");
146 flash_esel = 2; /* give our best effort to continue */
147 } else {
148 /* invalidate existing TLB entry for flash + promjet */
149 disable_tlb(flash_esel);
150 }
Prabhakar Kushwaha768e1202013-09-12 11:11:28 +0530151
152 set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
153 MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
154 0, flash_esel, BOOKE_PAGESZ_256M, 1);
155#endif
156 set_liodns();
157#ifdef CONFIG_SYS_DPAA_QBMAN
158 setup_portals();
159#endif
160 select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
161
162 return 0;
163}
164
165unsigned long get_board_sys_clk(void)
166{
167 u8 sysclk_conf = QIXIS_READ(brdcfg[1]);
168
169 switch (sysclk_conf & 0x0F) {
170 case QIXIS_SYSCLK_64:
171 return 64000000;
172 case QIXIS_SYSCLK_83:
173 return 83333333;
174 case QIXIS_SYSCLK_100:
175 return 100000000;
176 case QIXIS_SYSCLK_125:
177 return 125000000;
178 case QIXIS_SYSCLK_133:
179 return 133333333;
180 case QIXIS_SYSCLK_150:
181 return 150000000;
182 case QIXIS_SYSCLK_160:
183 return 160000000;
184 case QIXIS_SYSCLK_166:
185 return 166666666;
186 }
187 return 66666666;
188}
189
190unsigned long get_board_ddr_clk(void)
191{
192 u8 ddrclk_conf = QIXIS_READ(brdcfg[1]);
193
194 switch ((ddrclk_conf & 0x30) >> 4) {
195 case QIXIS_DDRCLK_100:
196 return 100000000;
197 case QIXIS_DDRCLK_125:
198 return 125000000;
199 case QIXIS_DDRCLK_133:
200 return 133333333;
201 }
202 return 66666666;
203}
204
Prabhakar Kushwaha768e1202013-09-12 11:11:28 +0530205#define NUM_SRDS_BANKS 2
206int misc_init_r(void)
207{
208 u8 sw;
209 serdes_corenet_t *srds_regs =
210 (void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR;
211 u32 actual[NUM_SRDS_BANKS] = { 0 };
212 int i;
213
214 sw = QIXIS_READ(brdcfg[2]);
215 for (i = 0; i < NUM_SRDS_BANKS; i++) {
216 unsigned int clock = (sw >> (6 - 2 * i)) & 3;
217 switch (clock) {
218 case 0:
219 actual[i] = SRDS_PLLCR0_RFCK_SEL_100;
220 break;
221 case 1:
222 actual[i] = SRDS_PLLCR0_RFCK_SEL_125;
223 break;
224 case 2:
225 actual[i] = SRDS_PLLCR0_RFCK_SEL_156_25;
226 break;
227 }
228 }
229
230 puts("SerDes1");
231 for (i = 0; i < NUM_SRDS_BANKS; i++) {
232 u32 pllcr0 = srds_regs->bank[i].pllcr0;
233 u32 expected = pllcr0 & SRDS_PLLCR0_RFCK_SEL_MASK;
234 if (expected != actual[i]) {
235 printf("expects ref clk%d %sMHz, but actual is %sMHz\n",
236 i + 1, serdes_clock_to_string(expected),
237 serdes_clock_to_string(actual[i]));
238 }
239 }
240
Zhao Qiang433e0af2014-03-21 16:21:46 +0800241 qe_board_setup();
242
Prabhakar Kushwaha768e1202013-09-12 11:11:28 +0530243 return 0;
244}
245
Simon Glass2aec3cc2014-10-23 18:58:47 -0600246int ft_board_setup(void *blob, bd_t *bd)
Prabhakar Kushwaha768e1202013-09-12 11:11:28 +0530247{
248 phys_addr_t base;
249 phys_size_t size;
250
251 ft_cpu_setup(blob, bd);
252
253 base = getenv_bootm_low();
254 size = getenv_bootm_size();
255
256 fdt_fixup_memory(blob, (u64)base, (u64)size);
257
258#ifdef CONFIG_PCI
259 pci_of_setup(blob, bd);
260#endif
261
262 fdt_fixup_liodn(blob);
263
264#ifdef CONFIG_HAS_FSL_DR_USB
265 fdt_fixup_dr_usb(blob, bd);
266#endif
267
268#ifdef CONFIG_SYS_DPAA_FMAN
269 fdt_fixup_fman_ethernet(blob);
Prabhakar Kushwahae70cd8d2014-01-27 15:55:20 +0530270 fdt_fixup_board_enet(blob);
Prabhakar Kushwaha768e1202013-09-12 11:11:28 +0530271#endif
Simon Glass2aec3cc2014-10-23 18:58:47 -0600272
273 return 0;
Prabhakar Kushwaha768e1202013-09-12 11:11:28 +0530274}
275
276void qixis_dump_switch(void)
277{
278 int i, nr_of_cfgsw;
279
280 QIXIS_WRITE(cms[0], 0x00);
281 nr_of_cfgsw = QIXIS_READ(cms[1]);
282
283 puts("DIP switch settings dump:\n");
284 for (i = 1; i <= nr_of_cfgsw; i++) {
285 QIXIS_WRITE(cms[0], i);
286 printf("SW%d = (0x%02x)\n", i, QIXIS_READ(cms[1]));
287 }
288}
Prabhakar Kushwaha692256a2013-12-26 12:40:55 +0530289
290int board_need_mem_reset(void)
291{
292 return 1;
293}