blob: 42b78485cfcfdf80a9d7305be90dd2ad428a7291 [file] [log] [blame]
Peng Fanf9220172019-08-27 06:26:08 +00001/* SPDX-License-Identifier: GPL-2.0+ */
2/*
3 * Copyright 2019 NXP
4 */
5
6#ifndef __IMX8MM_EVK_H
7#define __IMX8MM_EVK_H
8
9#include <linux/sizes.h>
Simon Glassfb64e362020-05-10 11:40:09 -060010#include <linux/stringify.h>
Peng Fanf9220172019-08-27 06:26:08 +000011#include <asm/arch/imx-regs.h>
12
Oleksandr Suvorovef7b1f72021-08-29 22:39:11 +030013#define CONFIG_SYS_BOOTM_LEN (64 * SZ_1M)
Peng Fanf9220172019-08-27 06:26:08 +000014#define CONFIG_SPL_MAX_SIZE (148 * 1024)
15#define CONFIG_SYS_MONITOR_LEN SZ_512K
Peng Fanf9220172019-08-27 06:26:08 +000016#define CONFIG_SYS_UBOOT_BASE \
17 (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
18
19#ifdef CONFIG_SPL_BUILD
20#define CONFIG_SPL_STACK 0x920000
21#define CONFIG_SPL_BSS_START_ADDR 0x910000
22#define CONFIG_SPL_BSS_MAX_SIZE SZ_8K /* 8 KB */
23#define CONFIG_SYS_SPL_MALLOC_START 0x42200000
24#define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K /* 512 KB */
25
26/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
27#define CONFIG_MALLOC_F_ADDR 0x930000
28/* For RAW image gives a error info not panic */
29#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
30
31#endif
32
Alice Guo7bc61e42020-12-18 14:50:07 +080033#ifndef CONFIG_SPL_BUILD
34#define BOOT_TARGET_DEVICES(func) \
35 func(MMC, mmc, 1) \
36 func(MMC, mmc, 2) \
37 func(DHCP, dhcp, na)
38
39#include <config_distro_bootcmd.h>
40#endif
41
Peng Fanf9220172019-08-27 06:26:08 +000042/* Initial environment variables */
43#define CONFIG_EXTRA_ENV_SETTINGS \
Alice Guo7bc61e42020-12-18 14:50:07 +080044 BOOTENV \
Tom Rini9004ee02021-08-23 10:25:30 -040045 "scriptaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
46 "kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
Fabio Estevameb047fb2019-12-16 16:09:22 -030047 "image=Image\0" \
Fabio Estevam21b135a2019-12-11 14:31:03 -030048 "console=ttymxc1,115200\0" \
Peng Fan580d6bd2021-03-19 15:56:57 +080049 "fdt_addr_r=0x43000000\0" \
Fabio Estevameb047fb2019-12-16 16:09:22 -030050 "boot_fit=no\0" \
Peng Fan580d6bd2021-03-19 15:56:57 +080051 "fdtfile=imx8mm-evk.dtb\0" \
Peng Fanf9220172019-08-27 06:26:08 +000052 "initrd_addr=0x43800000\0" \
Grygorii Tertychnyi4d7cbe52020-08-21 15:39:43 +020053 "bootm_size=0x10000000\0" \
Tom Rinib113bca2021-12-11 14:55:52 -050054 "mmcpart=1\0" \
Peng Fanbb4bb582022-04-15 12:23:41 +080055 "mmcroot=/dev/mmcblk1p2 rootwait rw\0" \
Peng Fanf9220172019-08-27 06:26:08 +000056
57/* Link Definitions */
Peng Fanf9220172019-08-27 06:26:08 +000058
59#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
60#define CONFIG_SYS_INIT_RAM_SIZE 0x200000
61#define CONFIG_SYS_INIT_SP_OFFSET \
62 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
63#define CONFIG_SYS_INIT_SP_ADDR \
64 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
65
Peng Fanf9220172019-08-27 06:26:08 +000066
Peng Fanf9220172019-08-27 06:26:08 +000067#define CONFIG_SYS_SDRAM_BASE 0x40000000
68#define PHYS_SDRAM 0x40000000
69#define PHYS_SDRAM_SIZE 0x80000000 /* 2GB DDR */
70
Peng Fanf9220172019-08-27 06:26:08 +000071#define CONFIG_MXC_UART_BASE UART2_BASE_ADDR
72
73/* Monitor Command Prompt */
Peng Fanf9220172019-08-27 06:26:08 +000074#define CONFIG_SYS_CBSIZE 2048
75#define CONFIG_SYS_MAXARGS 64
76#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
77#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
78 sizeof(CONFIG_SYS_PROMPT) + 16)
79
Peng Fane5f2b222019-10-22 03:30:04 +000080#define CONFIG_FEC_MXC_PHYADDR 0
81#define FEC_QUIRK_ENET_MAC
82
Peng Fanf9220172019-08-27 06:26:08 +000083#endif