board/edb93xx/sdram_cfg.h

/*
 * Copyright (C) 2009 Matthias Kaehlcke <matthias@kaehlcke.net>
 *
 * Copyright (C) 2006 Dominic Rath <Dominic.Rath@gmx.de>
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

#include <config.h>
#include <asm/arch/ep93xx.h>

#define SDRAM_BASE_ADDR		PHYS_SDRAM_1

#ifdef CONFIG_EDB93XX_SDCS0
#define SDRAM_DEVCFG_REG	devcfg0
#elif defined(CONFIG_EDB93XX_SDCS3)
#define SDRAM_DEVCFG_REG	devcfg3
#else
#error "SDRAM bank configuration"
#endif

#if defined(CONFIG_EDB9301) || defined(CONFIG_EDB9302) ||	\
	defined(CONFIG_EDB9302A)
/*
 * 1x Samsung K4S561632C-TC/L75 4M x 16bit x 4 banks SDRAM
 *
 * CLK cycle time min:
 *	@ CAS latency = 3: 7.5ns
 *	@ CAS latency = 2: 10ns
 * We're running at 66MHz (15ns cycle time) external bus speed (HCLK),
 * so it's safe to use CAS latency = 2
 *
 * RAS-to-CAS delay min:
 *	20ns
 * At 15ns cycle time, we use RAS-to-CAS delay = 2
 *
 * SROMLL = 1: Swap BA[1:0] with A[13:12], making the SDRAM appear
 * as four blocks of 8MB size, instead of eight blocks of 4MB size:
 *
 * EDB9301/EDB9302:
 *
 * 0x00000000 - 0x007fffff
 * 0x01000000 - 0x017fffff
 * 0x04000000 - 0x047fffff
 * 0x05000000 - 0x057fffff
 *
 *
 * EDB9302a:
 *
 * 0xc0000000 - 0xc07fffff
 * 0xc1000000 - 0xc17fffff
 * 0xc4000000 - 0xc47fffff
 * 0xc5000000 - 0xc57fffff
 *
 * BANKCOUNT = 1: This is a device with four banks
 */

#define SDRAM_DEVCFG_VAL (SDRAM_DEVCFG_BANKCOUNT |			\
				SDRAM_DEVCFG_SROMLL |			\
				SDRAM_DEVCFG_CASLAT_2 |			\
				SDRAM_DEVCFG_RASTOCAS_2 |		\
				SDRAM_DEVCFG_EXTBUSWIDTH)

/*
 * 16 bit ext. bus
 *
 * A[22:09] is output as SYA[13:0]
 * CAS latency: 2
 * Burst type: sequential
 * Burst length: 8 (required for 16 bit ext. bus)
 * SYA[13:0] = 0x0023
 */
#define SDRAM_MODE_REG_VAL	0x4600

#define SDRAM_BANK_SEL_0	0x00000000 /* A[22:21] = b00 */
#define SDRAM_BANK_SEL_1	0x00200000 /* A[22:21] = b01 */
#define SDRAM_BANK_SEL_2	0x00400000 /* A[22:21] = b10 */
#define SDRAM_BANK_SEL_3	0x00600000 /* A[22:21] = b11 */

#elif defined(CONFIG_EDB9307) || defined(CONFIG_EDB9307A) ||	\
	defined CONFIG_EDB9312 || defined(CONFIG_EDB9315) ||	\
	defined(CONFIG_EDB9315A)
/*
 * 2x Samsung K4S561632C-TC/L75 4M x 16bit x 4 banks SDRAM
 *
 * CLK cycle time min:
 *	@ CAS latency = 3: 7.5ns
 *	@ CAS latency = 2: 10ns
 * We're running at 100MHz (10ns cycle time) external bus speed (HCLK),
 * so it's safe to use CAS latency = 2
 *
 * RAS-to-CAS delay min:
 *	20ns
 * At 10ns cycle time, we use RAS-to-CAS delay = 2
 *
 * EDB9307, EDB9312, EDB9315:
 *
 * 0x00000000 - 0x01ffffff
 * 0x04000000 - 0x05ffffff
 *
 *
 * EDB9307a, EDB9315a:
 *
 * 0xc0000000 - 0xc1ffffff
 * 0xc4000000 - 0xc5ffffff
 */

#define SDRAM_DEVCFG_VAL	(SDRAM_DEVCFG_BANKCOUNT |		\
				SDRAM_DEVCFG_SROMLL |			\
				SDRAM_DEVCFG_CASLAT_2 |			\
				SDRAM_DEVCFG_RASTOCAS_2)

/*
 * 32 bit ext. bus
 *
 * A[23:10] is output as SYA[13:0]
 * CAS latency: 2
 * Burst type: sequential
 * Burst length: 4
 * SYA[13:0] = 0x0022
 */
#define SDRAM_MODE_REG_VAL	0x8800

#define SDRAM_BANK_SEL_0	0x00000000 /* A[23:22] = b00 */
#define SDRAM_BANK_SEL_1	0x00400000 /* A[23:22] = b01 */
#define SDRAM_BANK_SEL_2	0x00800000 /* A[23:22] = b10 */
#define SDRAM_BANK_SEL_3	0x00c00000 /* A[23:22] = b11 */
#endif