| Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 1 | # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
| 2 | %YAML 1.2 |
| 3 | --- |
| 4 | $id: http://devicetree.org/schemas/pci/samsung,exynos-pcie.yaml# |
| 5 | $schema: http://devicetree.org/meta-schemas/core.yaml# |
| 6 | |
| 7 | title: Samsung SoC series PCIe Host Controller |
| 8 | |
| 9 | maintainers: |
| 10 | - Marek Szyprowski <m.szyprowski@samsung.com> |
| 11 | - Jaehoon Chung <jh80.chung@samsung.com> |
| 12 | |
| 13 | description: |+ |
| 14 | Exynos5433 SoC PCIe host controller is based on the Synopsys DesignWare |
| 15 | PCIe IP and thus inherits all the common properties defined in |
| 16 | snps,dw-pcie.yaml. |
| 17 | |
| 18 | allOf: |
| 19 | - $ref: /schemas/pci/snps,dw-pcie.yaml# |
| 20 | |
| 21 | properties: |
| 22 | compatible: |
| 23 | const: samsung,exynos5433-pcie |
| 24 | |
| 25 | reg: |
| 26 | items: |
| 27 | - description: Data Bus Interface (DBI) registers. |
| 28 | - description: External Local Bus interface (ELBI) registers. |
| 29 | - description: PCIe configuration space region. |
| 30 | |
| 31 | reg-names: |
| 32 | items: |
| 33 | - const: dbi |
| 34 | - const: elbi |
| 35 | - const: config |
| 36 | |
| 37 | interrupts: |
| 38 | maxItems: 1 |
| 39 | |
| 40 | clocks: |
| 41 | items: |
| 42 | - description: PCIe bridge clock |
| 43 | - description: PCIe bus clock |
| 44 | |
| 45 | clock-names: |
| 46 | items: |
| 47 | - const: pcie |
| 48 | - const: pcie_bus |
| 49 | |
| 50 | phys: |
| 51 | maxItems: 1 |
| 52 | |
| 53 | vdd10-supply: |
| 54 | description: |
| 55 | Phandle to a regulator that provides 1.0V power to the PCIe block. |
| 56 | |
| 57 | vdd18-supply: |
| 58 | description: |
| 59 | Phandle to a regulator that provides 1.8V power to the PCIe block. |
| 60 | |
| 61 | num-lanes: |
| 62 | const: 1 |
| 63 | |
| 64 | num-viewport: |
| 65 | const: 3 |
| 66 | |
| 67 | required: |
| 68 | - reg |
| 69 | - reg-names |
| 70 | - interrupts |
| 71 | - "#address-cells" |
| 72 | - "#size-cells" |
| 73 | - "#interrupt-cells" |
| 74 | - interrupt-map |
| 75 | - interrupt-map-mask |
| 76 | - ranges |
| 77 | - bus-range |
| 78 | - device_type |
| 79 | - num-lanes |
| 80 | - num-viewport |
| 81 | - clocks |
| 82 | - clock-names |
| 83 | - phys |
| 84 | - vdd10-supply |
| 85 | - vdd18-supply |
| 86 | |
| 87 | unevaluatedProperties: false |
| 88 | |
| 89 | examples: |
| 90 | - | |
| 91 | #include <dt-bindings/interrupt-controller/irq.h> |
| 92 | #include <dt-bindings/interrupt-controller/arm-gic.h> |
| 93 | #include <dt-bindings/clock/exynos5433.h> |
| 94 | |
| 95 | pcie: pcie@15700000 { |
| 96 | compatible = "samsung,exynos5433-pcie"; |
| 97 | reg = <0x15700000 0x1000>, <0x156b0000 0x1000>, <0x0c000000 0x1000>; |
| 98 | reg-names = "dbi", "elbi", "config"; |
| 99 | #address-cells = <3>; |
| 100 | #size-cells = <2>; |
| 101 | #interrupt-cells = <1>; |
| 102 | device_type = "pci"; |
| 103 | interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>; |
| 104 | clocks = <&cmu_fsys CLK_PCIE>, <&cmu_fsys CLK_PCLK_PCIE_PHY>; |
| 105 | clock-names = "pcie", "pcie_bus"; |
| 106 | phys = <&pcie_phy>; |
| 107 | pinctrl-0 = <&pcie_bus &pcie_wlanen>; |
| 108 | pinctrl-names = "default"; |
| 109 | num-lanes = <1>; |
| 110 | num-viewport = <3>; |
| 111 | bus-range = <0x00 0xff>; |
| 112 | ranges = <0x81000000 0 0 0x0c001000 0 0x00010000>, |
| 113 | <0x82000000 0 0x0c011000 0x0c011000 0 0x03feefff>; |
| 114 | vdd10-supply = <&ldo6_reg>; |
| 115 | vdd18-supply = <&ldo7_reg>; |
| 116 | interrupt-map-mask = <0 0 0 0>; |
| 117 | interrupt-map = <0 0 0 0 &gic GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>; |
| 118 | }; |
| 119 | ... |