blob: 63f3ee33759cf0ed57e2ff1622966b0a5a847583 [file] [log] [blame]
Tom Rini53633a82024-02-29 12:33:36 -05001* Marvell 88PM860x Power Management IC
2
3Required parent device properties:
4- compatible : "marvell,88pm860x"
5- reg : the I2C slave address for the 88pm860x chip
6- interrupts : IRQ line for the 88pm860x chip
7- interrupt-controller: describes the 88pm860x as an interrupt controller (has its own domain)
8- #interrupt-cells : should be 1.
9 - The cell is the 88pm860x local IRQ number
10
11Optional parent device properties:
12- marvell,88pm860x-irq-read-clr: inicates whether interrupt status is cleared by read
13- marvell,88pm860x-slave-addr: 88pm860x are two chips solution. <reg> stores the I2C address
14 of one chip, and this property stores the I2C address of
15 another chip.
16
1788pm860x consists of a large and varied group of sub-devices:
18
19Device Supply Names Description
20------ ------------ -----------
2188pm860x-onkey : : On key
2288pm860x-rtc : : RTC
2388pm8607 : : Regulators
2488pm860x-backlight : : Backlight
2588pm860x-led : : Led
2688pm860x-touch : : Touchscreen
27
28Example:
29
30 pmic: 88pm860x@34 {
31 compatible = "marvell,88pm860x";
32 reg = <0x34>;
33 interrupts = <4>;
34 interrupt-parent = <&intc>;
35 interrupt-controller;
36 #interrupt-cells = <1>;
37
38 marvell,88pm860x-irq-read-clr;
39 marvell,88pm860x-slave-addr = <0x11>;
40
41 regulators {
42 BUCK1 {
43 regulator-min-microvolt = <1000000>;
44 regulator-max-microvolt = <1500000>;
45 regulator-boot-on;
46 regulator-always-on;
47 };
48 LDO1 {
49 regulator-min-microvolt = <1200000>;
50 regulator-max-microvolt = <2800000>;
51 regulator-boot-on;
52 regulator-always-on;
53 };
54 };
55 rtc {
56 marvell,88pm860x-vrtc = <1>;
57 };
58 touch {
59 marvell,88pm860x-gpadc-prebias = <1>;
60 marvell,88pm860x-gpadc-slot-cycle = <1>;
61 marvell,88pm860x-tsi-prebias = <6>;
62 marvell,88pm860x-pen-prebias = <16>;
63 marvell,88pm860x-pen-prechg = <2>;
64 marvell,88pm860x-resistor-X = <300>;
65 };
66 backlights {
67 backlight-0 {
68 marvell,88pm860x-iset = <4>;
69 marvell,88pm860x-pwm = <3>;
70 };
71 backlight-2 {
72 };
73 };
74 leds {
75 led0-red {
76 marvell,88pm860x-iset = <12>;
77 };
78 led0-green {
79 marvell,88pm860x-iset = <12>;
80 };
81 led0-blue {
82 marvell,88pm860x-iset = <12>;
83 };
84 };
85 };