Donghwa Lee | b73a88b | 2012-07-02 01:16:02 +0000 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (C) 2012 Samsung Electronics |
| 3 | * |
| 4 | * Author: Donghwa Lee <dh09.lee@samsung.com> |
| 5 | * |
| 6 | * This program is free software; you can redistribute it and/or |
| 7 | * modify it under the terms of the GNU General Public License as |
| 8 | * published by the Free Software Foundation; either version 2 of |
| 9 | * the License, or (at your option) any later version. |
| 10 | * |
| 11 | * This program is distributed in the hope that it will be useful, |
| 12 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 14 | * GNU General Public License for more details. |
| 15 | * |
| 16 | * You should have received a copy of the GNU General Public License |
| 17 | * along with this program; if not, write to the Free Software |
| 18 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| 19 | * MA 02111-1307 USA |
| 20 | */ |
| 21 | |
| 22 | #include <config.h> |
| 23 | #include <common.h> |
| 24 | #include <malloc.h> |
| 25 | #include <linux/err.h> |
| 26 | #include <asm/arch/clk.h> |
| 27 | #include <asm/arch/cpu.h> |
| 28 | #include <asm/arch/dp_info.h> |
| 29 | #include <asm/arch/dp.h> |
Ajay Kumar | 65f50f9 | 2013-02-21 23:53:06 +0000 | [diff] [blame^] | 30 | #include <fdtdec.h> |
| 31 | #include <libfdt.h> |
Donghwa Lee | b73a88b | 2012-07-02 01:16:02 +0000 | [diff] [blame] | 32 | |
| 33 | #include "exynos_dp_lowlevel.h" |
| 34 | |
Ajay Kumar | 65f50f9 | 2013-02-21 23:53:06 +0000 | [diff] [blame^] | 35 | DECLARE_GLOBAL_DATA_PTR; |
| 36 | |
Donghwa Lee | b73a88b | 2012-07-02 01:16:02 +0000 | [diff] [blame] | 37 | static struct exynos_dp_platform_data *dp_pd; |
| 38 | |
Ajay Kumar | d6092d9 | 2013-02-21 23:52:58 +0000 | [diff] [blame] | 39 | void __exynos_set_dp_phy(unsigned int onoff) |
| 40 | { |
| 41 | } |
| 42 | void exynos_set_dp_phy(unsigned int onoff) |
| 43 | __attribute__((weak, alias("__exynos_set_dp_phy"))); |
| 44 | |
Donghwa Lee | b73a88b | 2012-07-02 01:16:02 +0000 | [diff] [blame] | 45 | static void exynos_dp_disp_info(struct edp_disp_info *disp_info) |
| 46 | { |
| 47 | disp_info->h_total = disp_info->h_res + disp_info->h_sync_width + |
| 48 | disp_info->h_back_porch + disp_info->h_front_porch; |
| 49 | disp_info->v_total = disp_info->v_res + disp_info->v_sync_width + |
| 50 | disp_info->v_back_porch + disp_info->v_front_porch; |
| 51 | |
| 52 | return; |
| 53 | } |
| 54 | |
| 55 | static int exynos_dp_init_dp(void) |
| 56 | { |
| 57 | int ret; |
| 58 | exynos_dp_reset(); |
| 59 | |
| 60 | /* SW defined function Normal operation */ |
| 61 | exynos_dp_enable_sw_func(DP_ENABLE); |
| 62 | |
| 63 | ret = exynos_dp_init_analog_func(); |
| 64 | if (ret != EXYNOS_DP_SUCCESS) |
| 65 | return ret; |
| 66 | |
| 67 | exynos_dp_init_hpd(); |
| 68 | exynos_dp_init_aux(); |
| 69 | |
| 70 | return ret; |
| 71 | } |
| 72 | |
| 73 | static unsigned char exynos_dp_calc_edid_check_sum(unsigned char *edid_data) |
| 74 | { |
| 75 | int i; |
| 76 | unsigned char sum = 0; |
| 77 | |
| 78 | for (i = 0; i < EDID_BLOCK_LENGTH; i++) |
| 79 | sum = sum + edid_data[i]; |
| 80 | |
| 81 | return sum; |
| 82 | } |
| 83 | |
| 84 | static unsigned int exynos_dp_read_edid(void) |
| 85 | { |
| 86 | unsigned char edid[EDID_BLOCK_LENGTH * 2]; |
| 87 | unsigned int extend_block = 0; |
| 88 | unsigned char sum; |
| 89 | unsigned char test_vector; |
| 90 | int retval; |
| 91 | |
| 92 | /* |
| 93 | * EDID device address is 0x50. |
| 94 | * However, if necessary, you must have set upper address |
| 95 | * into E-EDID in I2C device, 0x30. |
| 96 | */ |
| 97 | |
| 98 | /* Read Extension Flag, Number of 128-byte EDID extension blocks */ |
| 99 | exynos_dp_read_byte_from_i2c(I2C_EDID_DEVICE_ADDR, EDID_EXTENSION_FLAG, |
| 100 | &extend_block); |
| 101 | |
| 102 | if (extend_block > 0) { |
| 103 | printf("DP EDID data includes a single extension!\n"); |
| 104 | |
| 105 | /* Read EDID data */ |
| 106 | retval = exynos_dp_read_bytes_from_i2c(I2C_EDID_DEVICE_ADDR, |
| 107 | EDID_HEADER_PATTERN, |
| 108 | EDID_BLOCK_LENGTH, |
| 109 | &edid[EDID_HEADER_PATTERN]); |
| 110 | if (retval != 0) { |
| 111 | printf("DP EDID Read failed!\n"); |
| 112 | return -1; |
| 113 | } |
| 114 | sum = exynos_dp_calc_edid_check_sum(edid); |
| 115 | if (sum != 0) { |
| 116 | printf("DP EDID bad checksum!\n"); |
| 117 | return -1; |
| 118 | } |
| 119 | |
| 120 | /* Read additional EDID data */ |
| 121 | retval = exynos_dp_read_bytes_from_i2c(I2C_EDID_DEVICE_ADDR, |
| 122 | EDID_BLOCK_LENGTH, |
| 123 | EDID_BLOCK_LENGTH, |
| 124 | &edid[EDID_BLOCK_LENGTH]); |
| 125 | if (retval != 0) { |
| 126 | printf("DP EDID Read failed!\n"); |
| 127 | return -1; |
| 128 | } |
| 129 | sum = exynos_dp_calc_edid_check_sum(&edid[EDID_BLOCK_LENGTH]); |
| 130 | if (sum != 0) { |
| 131 | printf("DP EDID bad checksum!\n"); |
| 132 | return -1; |
| 133 | } |
| 134 | |
| 135 | exynos_dp_read_byte_from_dpcd(DPCD_TEST_REQUEST, |
| 136 | &test_vector); |
| 137 | if (test_vector & DPCD_TEST_EDID_READ) { |
| 138 | exynos_dp_write_byte_to_dpcd(DPCD_TEST_EDID_CHECKSUM, |
| 139 | edid[EDID_BLOCK_LENGTH + EDID_CHECKSUM]); |
| 140 | exynos_dp_write_byte_to_dpcd(DPCD_TEST_RESPONSE, |
| 141 | DPCD_TEST_EDID_CHECKSUM_WRITE); |
| 142 | } |
| 143 | } else { |
| 144 | debug("DP EDID data does not include any extensions.\n"); |
| 145 | |
| 146 | /* Read EDID data */ |
| 147 | retval = exynos_dp_read_bytes_from_i2c(I2C_EDID_DEVICE_ADDR, |
| 148 | EDID_HEADER_PATTERN, |
| 149 | EDID_BLOCK_LENGTH, |
| 150 | &edid[EDID_HEADER_PATTERN]); |
| 151 | |
| 152 | if (retval != 0) { |
| 153 | printf("DP EDID Read failed!\n"); |
| 154 | return -1; |
| 155 | } |
| 156 | sum = exynos_dp_calc_edid_check_sum(edid); |
| 157 | if (sum != 0) { |
| 158 | printf("DP EDID bad checksum!\n"); |
| 159 | return -1; |
| 160 | } |
| 161 | |
| 162 | exynos_dp_read_byte_from_dpcd(DPCD_TEST_REQUEST, |
| 163 | &test_vector); |
| 164 | if (test_vector & DPCD_TEST_EDID_READ) { |
| 165 | exynos_dp_write_byte_to_dpcd(DPCD_TEST_EDID_CHECKSUM, |
| 166 | edid[EDID_CHECKSUM]); |
| 167 | exynos_dp_write_byte_to_dpcd(DPCD_TEST_RESPONSE, |
| 168 | DPCD_TEST_EDID_CHECKSUM_WRITE); |
| 169 | } |
| 170 | } |
| 171 | |
| 172 | debug("DP EDID Read success!\n"); |
| 173 | |
| 174 | return 0; |
| 175 | } |
| 176 | |
| 177 | static unsigned int exynos_dp_handle_edid(struct edp_device_info *edp_info) |
| 178 | { |
| 179 | unsigned char buf[12]; |
| 180 | unsigned int ret; |
| 181 | unsigned char temp; |
| 182 | unsigned char retry_cnt; |
| 183 | unsigned char dpcd_rev[16]; |
| 184 | unsigned char lane_bw[16]; |
| 185 | unsigned char lane_cnt[16]; |
| 186 | |
| 187 | memset(dpcd_rev, 0, 16); |
| 188 | memset(lane_bw, 0, 16); |
| 189 | memset(lane_cnt, 0, 16); |
| 190 | memset(buf, 0, 12); |
| 191 | |
| 192 | retry_cnt = 5; |
| 193 | while (retry_cnt) { |
| 194 | /* Read DPCD 0x0000-0x000b */ |
| 195 | ret = exynos_dp_read_bytes_from_dpcd(DPCD_DPCD_REV, 12, |
| 196 | buf); |
| 197 | if (ret != EXYNOS_DP_SUCCESS) { |
| 198 | if (retry_cnt == 0) { |
| 199 | printf("DP read_byte_from_dpcd() failed\n"); |
| 200 | return ret; |
| 201 | } |
| 202 | retry_cnt--; |
| 203 | } else |
| 204 | break; |
| 205 | } |
| 206 | |
| 207 | /* */ |
| 208 | temp = buf[DPCD_DPCD_REV]; |
| 209 | if (temp == DP_DPCD_REV_10 || temp == DP_DPCD_REV_11) |
| 210 | edp_info->dpcd_rev = temp; |
| 211 | else { |
| 212 | printf("DP Wrong DPCD Rev : %x\n", temp); |
| 213 | return -ENODEV; |
| 214 | } |
| 215 | |
| 216 | temp = buf[DPCD_MAX_LINK_RATE]; |
| 217 | if (temp == DP_LANE_BW_1_62 || temp == DP_LANE_BW_2_70) |
| 218 | edp_info->lane_bw = temp; |
| 219 | else { |
| 220 | printf("DP Wrong MAX LINK RATE : %x\n", temp); |
| 221 | return -EINVAL; |
| 222 | } |
| 223 | |
| 224 | /*Refer VESA Display Port Stnadard Ver1.1a Page 120 */ |
| 225 | if (edp_info->dpcd_rev == DP_DPCD_REV_11) { |
| 226 | temp = buf[DPCD_MAX_LANE_COUNT] & 0x1f; |
| 227 | if (buf[DPCD_MAX_LANE_COUNT] & 0x80) |
| 228 | edp_info->dpcd_efc = 1; |
| 229 | else |
| 230 | edp_info->dpcd_efc = 0; |
| 231 | } else { |
| 232 | temp = buf[DPCD_MAX_LANE_COUNT]; |
| 233 | edp_info->dpcd_efc = 0; |
| 234 | } |
| 235 | |
| 236 | if (temp == DP_LANE_CNT_1 || temp == DP_LANE_CNT_2 || |
| 237 | temp == DP_LANE_CNT_4) { |
| 238 | edp_info->lane_cnt = temp; |
| 239 | } else { |
| 240 | printf("DP Wrong MAX LANE COUNT : %x\n", temp); |
| 241 | return -EINVAL; |
| 242 | } |
| 243 | |
| 244 | ret = exynos_dp_read_edid(); |
| 245 | if (ret != EXYNOS_DP_SUCCESS) { |
| 246 | printf("DP exynos_dp_read_edid() failed\n"); |
| 247 | return -EINVAL; |
| 248 | } |
| 249 | |
| 250 | return ret; |
| 251 | } |
| 252 | |
| 253 | static void exynos_dp_init_training(void) |
| 254 | { |
| 255 | /* |
| 256 | * MACRO_RST must be applied after the PLL_LOCK to avoid |
| 257 | * the DP inter pair skew issue for at least 10 us |
| 258 | */ |
| 259 | exynos_dp_reset_macro(); |
| 260 | |
| 261 | /* All DP analog module power up */ |
| 262 | exynos_dp_set_analog_power_down(POWER_ALL, 0); |
| 263 | } |
| 264 | |
| 265 | static unsigned int exynos_dp_link_start(struct edp_device_info *edp_info) |
| 266 | { |
| 267 | unsigned char buf[5]; |
| 268 | unsigned int ret = 0; |
| 269 | |
| 270 | debug("DP: %s was called\n", __func__); |
| 271 | |
| 272 | edp_info->lt_info.lt_status = DP_LT_CR; |
| 273 | edp_info->lt_info.ep_loop = 0; |
| 274 | edp_info->lt_info.cr_loop[0] = 0; |
| 275 | edp_info->lt_info.cr_loop[1] = 0; |
| 276 | edp_info->lt_info.cr_loop[2] = 0; |
| 277 | edp_info->lt_info.cr_loop[3] = 0; |
| 278 | |
| 279 | /* Set sink to D0 (Sink Not Ready) mode. */ |
| 280 | ret = exynos_dp_write_byte_to_dpcd(DPCD_SINK_POWER_STATE, |
| 281 | DPCD_SET_POWER_STATE_D0); |
| 282 | if (ret != EXYNOS_DP_SUCCESS) { |
| 283 | printf("DP write_dpcd_byte failed\n"); |
| 284 | return ret; |
| 285 | } |
| 286 | |
| 287 | /* Set link rate and count as you want to establish*/ |
| 288 | exynos_dp_set_link_bandwidth(edp_info->lane_bw); |
| 289 | exynos_dp_set_lane_count(edp_info->lane_cnt); |
| 290 | |
| 291 | /* Setup RX configuration */ |
| 292 | buf[0] = edp_info->lane_bw; |
| 293 | buf[1] = edp_info->lane_cnt; |
| 294 | |
| 295 | ret = exynos_dp_write_bytes_to_dpcd(DPCD_LINK_BW_SET, 2, |
| 296 | buf); |
| 297 | if (ret != EXYNOS_DP_SUCCESS) { |
| 298 | printf("DP write_dpcd_byte failed\n"); |
| 299 | return ret; |
| 300 | } |
| 301 | |
| 302 | exynos_dp_set_lane_pre_emphasis(PRE_EMPHASIS_LEVEL_0, |
| 303 | edp_info->lane_cnt); |
| 304 | |
| 305 | /* Set training pattern 1 */ |
| 306 | exynos_dp_set_training_pattern(TRAINING_PTN1); |
| 307 | |
| 308 | /* Set RX training pattern */ |
| 309 | buf[0] = DPCD_SCRAMBLING_DISABLED | DPCD_TRAINING_PATTERN_1; |
| 310 | |
| 311 | buf[1] = DPCD_PRE_EMPHASIS_SET_PATTERN_2_LEVEL_0 | |
| 312 | DPCD_VOLTAGE_SWING_SET_PATTERN_1_LEVEL_0; |
| 313 | buf[2] = DPCD_PRE_EMPHASIS_SET_PATTERN_2_LEVEL_0 | |
| 314 | DPCD_VOLTAGE_SWING_SET_PATTERN_1_LEVEL_0; |
| 315 | buf[3] = DPCD_PRE_EMPHASIS_SET_PATTERN_2_LEVEL_0 | |
| 316 | DPCD_VOLTAGE_SWING_SET_PATTERN_1_LEVEL_0; |
| 317 | buf[4] = DPCD_PRE_EMPHASIS_SET_PATTERN_2_LEVEL_0 | |
| 318 | DPCD_VOLTAGE_SWING_SET_PATTERN_1_LEVEL_0; |
| 319 | |
| 320 | ret = exynos_dp_write_bytes_to_dpcd(DPCD_TRAINING_PATTERN_SET, |
| 321 | 5, buf); |
| 322 | if (ret != EXYNOS_DP_SUCCESS) { |
| 323 | printf("DP write_dpcd_byte failed\n"); |
| 324 | return ret; |
| 325 | } |
| 326 | |
| 327 | return ret; |
| 328 | } |
| 329 | |
| 330 | static unsigned int exynos_dp_training_pattern_dis(void) |
| 331 | { |
| 332 | unsigned int ret = EXYNOS_DP_SUCCESS; |
| 333 | |
| 334 | exynos_dp_set_training_pattern(DP_NONE); |
| 335 | |
| 336 | ret = exynos_dp_write_byte_to_dpcd(DPCD_TRAINING_PATTERN_SET, |
| 337 | DPCD_TRAINING_PATTERN_DISABLED); |
| 338 | if (ret != EXYNOS_DP_SUCCESS) { |
| 339 | printf("DP requst_link_traninig_req failed\n"); |
| 340 | return -EAGAIN; |
| 341 | } |
| 342 | |
| 343 | return ret; |
| 344 | } |
| 345 | |
| 346 | static unsigned int exynos_dp_enable_rx_to_enhanced_mode(unsigned char enable) |
| 347 | { |
| 348 | unsigned char data; |
| 349 | unsigned int ret = EXYNOS_DP_SUCCESS; |
| 350 | |
| 351 | ret = exynos_dp_read_byte_from_dpcd(DPCD_LANE_COUNT_SET, |
| 352 | &data); |
| 353 | if (ret != EXYNOS_DP_SUCCESS) { |
| 354 | printf("DP read_from_dpcd failed\n"); |
| 355 | return -EAGAIN; |
| 356 | } |
| 357 | |
| 358 | if (enable) |
| 359 | data = DPCD_ENHANCED_FRAME_EN | DPCD_LN_COUNT_SET(data); |
| 360 | else |
| 361 | data = DPCD_LN_COUNT_SET(data); |
| 362 | |
| 363 | ret = exynos_dp_write_byte_to_dpcd(DPCD_LANE_COUNT_SET, |
| 364 | data); |
| 365 | if (ret != EXYNOS_DP_SUCCESS) { |
| 366 | printf("DP write_to_dpcd failed\n"); |
| 367 | return -EAGAIN; |
| 368 | |
| 369 | } |
| 370 | |
| 371 | return ret; |
| 372 | } |
| 373 | |
| 374 | static unsigned int exynos_dp_set_enhanced_mode(unsigned char enhance_mode) |
| 375 | { |
| 376 | unsigned int ret = EXYNOS_DP_SUCCESS; |
| 377 | |
| 378 | ret = exynos_dp_enable_rx_to_enhanced_mode(enhance_mode); |
| 379 | if (ret != EXYNOS_DP_SUCCESS) { |
| 380 | printf("DP rx_enhance_mode failed\n"); |
| 381 | return -EAGAIN; |
| 382 | } |
| 383 | |
| 384 | exynos_dp_enable_enhanced_mode(enhance_mode); |
| 385 | |
| 386 | return ret; |
| 387 | } |
| 388 | |
| 389 | static int exynos_dp_read_dpcd_lane_stat(struct edp_device_info *edp_info, |
| 390 | unsigned char *status) |
| 391 | { |
| 392 | unsigned int ret, i; |
| 393 | unsigned char buf[2]; |
| 394 | unsigned char lane_stat[DP_LANE_CNT_4] = {0,}; |
| 395 | unsigned char shift_val[DP_LANE_CNT_4] = {0,}; |
| 396 | |
| 397 | shift_val[0] = 0; |
| 398 | shift_val[1] = 4; |
| 399 | shift_val[2] = 0; |
| 400 | shift_val[3] = 4; |
| 401 | |
| 402 | ret = exynos_dp_read_bytes_from_dpcd(DPCD_LANE0_1_STATUS, 2, buf); |
| 403 | if (ret != EXYNOS_DP_SUCCESS) { |
| 404 | printf("DP read lane status failed\n"); |
| 405 | return ret; |
| 406 | } |
| 407 | |
| 408 | for (i = 0; i < edp_info->lane_cnt; i++) { |
| 409 | lane_stat[i] = (buf[(i / 2)] >> shift_val[i]) & 0x0f; |
| 410 | if (lane_stat[0] != lane_stat[i]) { |
| 411 | printf("Wrong lane status\n"); |
| 412 | return -EINVAL; |
| 413 | } |
| 414 | } |
| 415 | |
| 416 | *status = lane_stat[0]; |
| 417 | |
| 418 | return ret; |
| 419 | } |
| 420 | |
| 421 | static unsigned int exynos_dp_read_dpcd_adj_req(unsigned char lane_num, |
| 422 | unsigned char *sw, unsigned char *em) |
| 423 | { |
| 424 | unsigned int ret = EXYNOS_DP_SUCCESS; |
| 425 | unsigned char buf; |
| 426 | unsigned int dpcd_addr; |
| 427 | unsigned char shift_val[DP_LANE_CNT_4] = {0, 4, 0, 4}; |
| 428 | |
| 429 | /*lane_num value is used as arry index, so this range 0 ~ 3 */ |
| 430 | dpcd_addr = DPCD_ADJUST_REQUEST_LANE0_1 + (lane_num / 2); |
| 431 | |
| 432 | ret = exynos_dp_read_byte_from_dpcd(dpcd_addr, &buf); |
| 433 | if (ret != EXYNOS_DP_SUCCESS) { |
| 434 | printf("DP read adjust request failed\n"); |
| 435 | return -EAGAIN; |
| 436 | } |
| 437 | |
| 438 | *sw = ((buf >> shift_val[lane_num]) & 0x03); |
| 439 | *em = ((buf >> shift_val[lane_num]) & 0x0c) >> 2; |
| 440 | |
| 441 | return ret; |
| 442 | } |
| 443 | |
| 444 | static int exynos_dp_equalizer_err_link(struct edp_device_info *edp_info) |
| 445 | { |
| 446 | int ret; |
| 447 | |
| 448 | ret = exynos_dp_training_pattern_dis(); |
| 449 | if (ret != EXYNOS_DP_SUCCESS) { |
| 450 | printf("DP training_patter_disable() failed\n"); |
| 451 | edp_info->lt_info.lt_status = DP_LT_FAIL; |
| 452 | } |
| 453 | |
| 454 | ret = exynos_dp_set_enhanced_mode(edp_info->dpcd_efc); |
| 455 | if (ret != EXYNOS_DP_SUCCESS) { |
| 456 | printf("DP set_enhanced_mode() failed\n"); |
| 457 | edp_info->lt_info.lt_status = DP_LT_FAIL; |
| 458 | } |
| 459 | |
| 460 | return ret; |
| 461 | } |
| 462 | |
| 463 | static int exynos_dp_reduce_link_rate(struct edp_device_info *edp_info) |
| 464 | { |
| 465 | int ret; |
| 466 | |
| 467 | if (edp_info->lane_bw == DP_LANE_BW_2_70) { |
| 468 | edp_info->lane_bw = DP_LANE_BW_1_62; |
| 469 | printf("DP Change lane bw to 1.62Gbps\n"); |
| 470 | edp_info->lt_info.lt_status = DP_LT_START; |
| 471 | ret = EXYNOS_DP_SUCCESS; |
| 472 | } else { |
| 473 | ret = exynos_dp_training_pattern_dis(); |
| 474 | if (ret != EXYNOS_DP_SUCCESS) |
| 475 | printf("DP training_patter_disable() failed\n"); |
| 476 | |
| 477 | ret = exynos_dp_set_enhanced_mode(edp_info->dpcd_efc); |
| 478 | if (ret != EXYNOS_DP_SUCCESS) |
| 479 | printf("DP set_enhanced_mode() failed\n"); |
| 480 | |
| 481 | edp_info->lt_info.lt_status = DP_LT_FAIL; |
| 482 | } |
| 483 | |
| 484 | return ret; |
| 485 | } |
| 486 | |
| 487 | static unsigned int exynos_dp_process_clock_recovery(struct edp_device_info |
| 488 | *edp_info) |
| 489 | { |
| 490 | unsigned int ret = EXYNOS_DP_SUCCESS; |
| 491 | unsigned char lane_stat; |
| 492 | unsigned char lt_ctl_val[DP_LANE_CNT_4] = {0, }; |
| 493 | unsigned int i; |
| 494 | unsigned char adj_req_sw; |
| 495 | unsigned char adj_req_em; |
| 496 | unsigned char buf[5]; |
| 497 | |
| 498 | debug("DP: %s was called\n", __func__); |
| 499 | mdelay(1); |
| 500 | |
| 501 | ret = exynos_dp_read_dpcd_lane_stat(edp_info, &lane_stat); |
| 502 | if (ret != EXYNOS_DP_SUCCESS) { |
| 503 | printf("DP read lane status failed\n"); |
| 504 | edp_info->lt_info.lt_status = DP_LT_FAIL; |
| 505 | return ret; |
| 506 | } |
| 507 | |
| 508 | if (lane_stat & DP_LANE_STAT_CR_DONE) { |
| 509 | debug("DP clock Recovery training succeed\n"); |
| 510 | exynos_dp_set_training_pattern(TRAINING_PTN2); |
| 511 | |
| 512 | for (i = 0; i < edp_info->lane_cnt; i++) { |
| 513 | ret = exynos_dp_read_dpcd_adj_req(i, &adj_req_sw, |
| 514 | &adj_req_em); |
| 515 | if (ret != EXYNOS_DP_SUCCESS) { |
| 516 | edp_info->lt_info.lt_status = DP_LT_FAIL; |
| 517 | return ret; |
| 518 | } |
| 519 | |
| 520 | lt_ctl_val[i] = 0; |
| 521 | lt_ctl_val[i] = adj_req_em << 3 | adj_req_sw; |
| 522 | |
| 523 | if ((adj_req_sw == VOLTAGE_LEVEL_3) |
| 524 | || (adj_req_em == PRE_EMPHASIS_LEVEL_3)) { |
| 525 | lt_ctl_val[i] |= MAX_DRIVE_CURRENT_REACH_3 | |
| 526 | MAX_PRE_EMPHASIS_REACH_3; |
| 527 | } |
| 528 | exynos_dp_set_lanex_pre_emphasis(lt_ctl_val[i], i); |
| 529 | } |
| 530 | |
| 531 | buf[0] = DPCD_SCRAMBLING_DISABLED | DPCD_TRAINING_PATTERN_2; |
| 532 | buf[1] = lt_ctl_val[0]; |
| 533 | buf[2] = lt_ctl_val[1]; |
| 534 | buf[3] = lt_ctl_val[2]; |
| 535 | buf[4] = lt_ctl_val[3]; |
| 536 | |
| 537 | ret = exynos_dp_write_bytes_to_dpcd( |
| 538 | DPCD_TRAINING_PATTERN_SET, 5, buf); |
| 539 | if (ret != EXYNOS_DP_SUCCESS) { |
| 540 | printf("DP write traning pattern1 failed\n"); |
| 541 | edp_info->lt_info.lt_status = DP_LT_FAIL; |
| 542 | return ret; |
| 543 | } else |
| 544 | edp_info->lt_info.lt_status = DP_LT_ET; |
| 545 | } else { |
| 546 | for (i = 0; i < edp_info->lane_cnt; i++) { |
| 547 | lt_ctl_val[i] = exynos_dp_get_lanex_pre_emphasis(i); |
| 548 | ret = exynos_dp_read_dpcd_adj_req(i, |
| 549 | &adj_req_sw, &adj_req_em); |
| 550 | if (ret != EXYNOS_DP_SUCCESS) { |
| 551 | printf("DP read adj req failed\n"); |
| 552 | edp_info->lt_info.lt_status = DP_LT_FAIL; |
| 553 | return ret; |
| 554 | } |
| 555 | |
| 556 | if ((adj_req_sw == VOLTAGE_LEVEL_3) || |
| 557 | (adj_req_em == PRE_EMPHASIS_LEVEL_3)) |
| 558 | ret = exynos_dp_reduce_link_rate(edp_info); |
| 559 | |
| 560 | if ((DRIVE_CURRENT_SET_0_GET(lt_ctl_val[i]) == |
| 561 | adj_req_sw) && |
| 562 | (PRE_EMPHASIS_SET_0_GET(lt_ctl_val[i]) == |
| 563 | adj_req_em)) { |
| 564 | edp_info->lt_info.cr_loop[i]++; |
| 565 | if (edp_info->lt_info.cr_loop[i] == MAX_CR_LOOP) |
| 566 | ret = exynos_dp_reduce_link_rate( |
| 567 | edp_info); |
| 568 | } |
| 569 | |
| 570 | lt_ctl_val[i] = 0; |
| 571 | lt_ctl_val[i] = adj_req_em << 3 | adj_req_sw; |
| 572 | |
| 573 | if ((adj_req_sw == VOLTAGE_LEVEL_3) || |
| 574 | (adj_req_em == PRE_EMPHASIS_LEVEL_3)) { |
| 575 | lt_ctl_val[i] |= MAX_DRIVE_CURRENT_REACH_3 | |
| 576 | MAX_PRE_EMPHASIS_REACH_3; |
| 577 | } |
| 578 | exynos_dp_set_lanex_pre_emphasis(lt_ctl_val[i], i); |
| 579 | } |
| 580 | |
| 581 | ret = exynos_dp_write_bytes_to_dpcd( |
| 582 | DPCD_TRAINING_LANE0_SET, 4, lt_ctl_val); |
| 583 | if (ret != EXYNOS_DP_SUCCESS) { |
| 584 | printf("DP write traning pattern2 failed\n"); |
| 585 | edp_info->lt_info.lt_status = DP_LT_FAIL; |
| 586 | return ret; |
| 587 | } |
| 588 | } |
| 589 | |
| 590 | return ret; |
| 591 | } |
| 592 | |
| 593 | static unsigned int exynos_dp_process_equalizer_training(struct edp_device_info |
| 594 | *edp_info) |
| 595 | { |
| 596 | unsigned int ret = EXYNOS_DP_SUCCESS; |
| 597 | unsigned char lane_stat, adj_req_sw, adj_req_em, i; |
| 598 | unsigned char lt_ctl_val[DP_LANE_CNT_4] = {0,}; |
| 599 | unsigned char interlane_aligned = 0; |
| 600 | unsigned char f_bw; |
| 601 | unsigned char f_lane_cnt; |
| 602 | unsigned char sink_stat; |
| 603 | |
| 604 | mdelay(1); |
| 605 | |
| 606 | ret = exynos_dp_read_dpcd_lane_stat(edp_info, &lane_stat); |
| 607 | if (ret != EXYNOS_DP_SUCCESS) { |
| 608 | printf("DP read lane status failed\n"); |
| 609 | edp_info->lt_info.lt_status = DP_LT_FAIL; |
| 610 | return ret; |
| 611 | } |
| 612 | |
| 613 | debug("DP lane stat : %x\n", lane_stat); |
| 614 | |
| 615 | if (lane_stat & DP_LANE_STAT_CR_DONE) { |
| 616 | ret = exynos_dp_read_byte_from_dpcd(DPCD_LN_ALIGN_UPDATED, |
| 617 | &sink_stat); |
| 618 | if (ret != EXYNOS_DP_SUCCESS) { |
| 619 | edp_info->lt_info.lt_status = DP_LT_FAIL; |
| 620 | |
| 621 | return ret; |
| 622 | } |
| 623 | |
| 624 | interlane_aligned = (sink_stat & DPCD_INTERLANE_ALIGN_DONE); |
| 625 | |
| 626 | for (i = 0; i < edp_info->lane_cnt; i++) { |
| 627 | ret = exynos_dp_read_dpcd_adj_req(i, |
| 628 | &adj_req_sw, &adj_req_em); |
| 629 | if (ret != EXYNOS_DP_SUCCESS) { |
| 630 | printf("DP read adj req 1 failed\n"); |
| 631 | edp_info->lt_info.lt_status = DP_LT_FAIL; |
| 632 | |
| 633 | return ret; |
| 634 | } |
| 635 | |
| 636 | lt_ctl_val[i] = 0; |
| 637 | lt_ctl_val[i] = adj_req_em << 3 | adj_req_sw; |
| 638 | |
| 639 | if ((adj_req_sw == VOLTAGE_LEVEL_3) || |
| 640 | (adj_req_em == PRE_EMPHASIS_LEVEL_3)) { |
| 641 | lt_ctl_val[i] |= MAX_DRIVE_CURRENT_REACH_3; |
| 642 | lt_ctl_val[i] |= MAX_PRE_EMPHASIS_REACH_3; |
| 643 | } |
| 644 | } |
| 645 | |
| 646 | if (((lane_stat&DP_LANE_STAT_CE_DONE) && |
| 647 | (lane_stat&DP_LANE_STAT_SYM_LOCK)) |
| 648 | && (interlane_aligned == DPCD_INTERLANE_ALIGN_DONE)) { |
| 649 | debug("DP Equalizer training succeed\n"); |
| 650 | |
| 651 | f_bw = exynos_dp_get_link_bandwidth(); |
| 652 | f_lane_cnt = exynos_dp_get_lane_count(); |
| 653 | |
| 654 | debug("DP final BandWidth : %x\n", f_bw); |
| 655 | debug("DP final Lane Count : %x\n", f_lane_cnt); |
| 656 | |
| 657 | edp_info->lt_info.lt_status = DP_LT_FINISHED; |
| 658 | |
| 659 | exynos_dp_equalizer_err_link(edp_info); |
| 660 | |
| 661 | } else { |
| 662 | edp_info->lt_info.ep_loop++; |
| 663 | |
| 664 | if (edp_info->lt_info.ep_loop > MAX_EQ_LOOP) { |
| 665 | if (edp_info->lane_bw == DP_LANE_BW_2_70) { |
| 666 | ret = exynos_dp_reduce_link_rate( |
| 667 | edp_info); |
| 668 | } else { |
| 669 | edp_info->lt_info.lt_status = |
| 670 | DP_LT_FAIL; |
| 671 | exynos_dp_equalizer_err_link(edp_info); |
| 672 | } |
| 673 | } else { |
| 674 | for (i = 0; i < edp_info->lane_cnt; i++) |
| 675 | exynos_dp_set_lanex_pre_emphasis( |
| 676 | lt_ctl_val[i], i); |
| 677 | |
| 678 | ret = exynos_dp_write_bytes_to_dpcd( |
| 679 | DPCD_TRAINING_LANE0_SET, |
| 680 | 4, lt_ctl_val); |
| 681 | if (ret != EXYNOS_DP_SUCCESS) { |
| 682 | printf("DP set lt pattern failed\n"); |
| 683 | edp_info->lt_info.lt_status = |
| 684 | DP_LT_FAIL; |
| 685 | exynos_dp_equalizer_err_link(edp_info); |
| 686 | } |
| 687 | } |
| 688 | } |
| 689 | } else if (edp_info->lane_bw == DP_LANE_BW_2_70) { |
| 690 | ret = exynos_dp_reduce_link_rate(edp_info); |
| 691 | } else { |
| 692 | edp_info->lt_info.lt_status = DP_LT_FAIL; |
| 693 | exynos_dp_equalizer_err_link(edp_info); |
| 694 | } |
| 695 | |
| 696 | return ret; |
| 697 | } |
| 698 | |
| 699 | static unsigned int exynos_dp_sw_link_training(struct edp_device_info *edp_info) |
| 700 | { |
| 701 | unsigned int ret = 0; |
| 702 | int training_finished; |
| 703 | |
| 704 | /* Turn off unnecessary lane */ |
| 705 | if (edp_info->lane_cnt == 1) |
| 706 | exynos_dp_set_analog_power_down(CH1_BLOCK, 1); |
| 707 | |
| 708 | training_finished = 0; |
| 709 | |
| 710 | edp_info->lt_info.lt_status = DP_LT_START; |
| 711 | |
| 712 | /* Process here */ |
| 713 | while (!training_finished) { |
| 714 | switch (edp_info->lt_info.lt_status) { |
| 715 | case DP_LT_START: |
| 716 | ret = exynos_dp_link_start(edp_info); |
| 717 | if (ret != EXYNOS_DP_SUCCESS) { |
| 718 | printf("DP LT:link start failed\n"); |
| 719 | return ret; |
| 720 | } |
| 721 | break; |
| 722 | case DP_LT_CR: |
| 723 | ret = exynos_dp_process_clock_recovery(edp_info); |
| 724 | if (ret != EXYNOS_DP_SUCCESS) { |
| 725 | printf("DP LT:clock recovery failed\n"); |
| 726 | return ret; |
| 727 | } |
| 728 | break; |
| 729 | case DP_LT_ET: |
| 730 | ret = exynos_dp_process_equalizer_training(edp_info); |
| 731 | if (ret != EXYNOS_DP_SUCCESS) { |
| 732 | printf("DP LT:equalizer training failed\n"); |
| 733 | return ret; |
| 734 | } |
| 735 | break; |
| 736 | case DP_LT_FINISHED: |
| 737 | training_finished = 1; |
| 738 | break; |
| 739 | case DP_LT_FAIL: |
| 740 | return -1; |
| 741 | } |
| 742 | } |
| 743 | |
| 744 | return ret; |
| 745 | } |
| 746 | |
| 747 | static unsigned int exynos_dp_set_link_train(struct edp_device_info *edp_info) |
| 748 | { |
| 749 | unsigned int ret; |
| 750 | |
| 751 | exynos_dp_init_training(); |
| 752 | |
| 753 | ret = exynos_dp_sw_link_training(edp_info); |
| 754 | if (ret != EXYNOS_DP_SUCCESS) |
| 755 | printf("DP dp_sw_link_traning() failed\n"); |
| 756 | |
| 757 | return ret; |
| 758 | } |
| 759 | |
| 760 | static void exynos_dp_enable_scramble(unsigned int enable) |
| 761 | { |
| 762 | unsigned char data; |
| 763 | |
| 764 | if (enable) { |
| 765 | exynos_dp_enable_scrambling(DP_ENABLE); |
| 766 | |
| 767 | exynos_dp_read_byte_from_dpcd(DPCD_TRAINING_PATTERN_SET, |
| 768 | &data); |
| 769 | exynos_dp_write_byte_to_dpcd(DPCD_TRAINING_PATTERN_SET, |
| 770 | (u8)(data & ~DPCD_SCRAMBLING_DISABLED)); |
| 771 | } else { |
| 772 | exynos_dp_enable_scrambling(DP_DISABLE); |
| 773 | exynos_dp_read_byte_from_dpcd(DPCD_TRAINING_PATTERN_SET, |
| 774 | &data); |
| 775 | exynos_dp_write_byte_to_dpcd(DPCD_TRAINING_PATTERN_SET, |
| 776 | (u8)(data | DPCD_SCRAMBLING_DISABLED)); |
| 777 | } |
| 778 | } |
| 779 | |
| 780 | static unsigned int exynos_dp_config_video(struct edp_device_info *edp_info) |
| 781 | { |
| 782 | unsigned int ret = 0; |
| 783 | unsigned int retry_cnt; |
| 784 | |
| 785 | mdelay(1); |
| 786 | |
| 787 | if (edp_info->video_info.master_mode) { |
| 788 | printf("DP does not support master mode\n"); |
| 789 | return -ENODEV; |
| 790 | } else { |
| 791 | /* debug slave */ |
| 792 | exynos_dp_config_video_slave_mode(&edp_info->video_info); |
| 793 | } |
| 794 | |
| 795 | exynos_dp_set_video_color_format(&edp_info->video_info); |
| 796 | |
| 797 | if (edp_info->video_info.bist_mode) { |
| 798 | if (exynos_dp_config_video_bist(edp_info) != 0) |
| 799 | return -1; |
| 800 | } |
| 801 | |
| 802 | ret = exynos_dp_get_pll_lock_status(); |
| 803 | if (ret != PLL_LOCKED) { |
| 804 | printf("DP PLL is not locked yet\n"); |
| 805 | return -EIO; |
| 806 | } |
| 807 | |
| 808 | if (edp_info->video_info.master_mode == 0) { |
| 809 | retry_cnt = 10; |
| 810 | while (retry_cnt) { |
| 811 | ret = exynos_dp_is_slave_video_stream_clock_on(); |
| 812 | if (ret != EXYNOS_DP_SUCCESS) { |
| 813 | if (retry_cnt == 0) { |
| 814 | printf("DP stream_clock_on failed\n"); |
| 815 | return ret; |
| 816 | } |
| 817 | retry_cnt--; |
| 818 | mdelay(1); |
| 819 | } else |
| 820 | break; |
| 821 | } |
| 822 | } |
| 823 | |
| 824 | /* Set to use the register calculated M/N video */ |
| 825 | exynos_dp_set_video_cr_mn(CALCULATED_M, 0, 0); |
| 826 | |
| 827 | /* For video bist, Video timing must be generated by register */ |
| 828 | exynos_dp_set_video_timing_mode(VIDEO_TIMING_FROM_CAPTURE); |
| 829 | |
| 830 | /* Enable video bist */ |
| 831 | if (edp_info->video_info.bist_pattern != COLOR_RAMP && |
| 832 | edp_info->video_info.bist_pattern != BALCK_WHITE_V_LINES && |
| 833 | edp_info->video_info.bist_pattern != COLOR_SQUARE) |
| 834 | exynos_dp_enable_video_bist(edp_info->video_info.bist_mode); |
| 835 | else |
| 836 | exynos_dp_enable_video_bist(DP_DISABLE); |
| 837 | |
| 838 | /* Disable video mute */ |
| 839 | exynos_dp_enable_video_mute(DP_DISABLE); |
| 840 | |
| 841 | /* Configure video Master or Slave mode */ |
| 842 | exynos_dp_enable_video_master(edp_info->video_info.master_mode); |
| 843 | |
| 844 | /* Enable video */ |
| 845 | exynos_dp_start_video(); |
| 846 | |
| 847 | if (edp_info->video_info.master_mode == 0) { |
| 848 | retry_cnt = 100; |
| 849 | while (retry_cnt) { |
| 850 | ret = exynos_dp_is_video_stream_on(); |
| 851 | if (ret != EXYNOS_DP_SUCCESS) { |
| 852 | if (retry_cnt == 0) { |
| 853 | printf("DP Timeout of video stream\n"); |
| 854 | return ret; |
| 855 | } |
| 856 | retry_cnt--; |
| 857 | mdelay(5); |
| 858 | } else |
| 859 | break; |
| 860 | } |
| 861 | } |
| 862 | |
| 863 | return ret; |
| 864 | } |
Ajay Kumar | 65f50f9 | 2013-02-21 23:53:06 +0000 | [diff] [blame^] | 865 | |
| 866 | #ifdef CONFIG_OF_CONTROL |
| 867 | int exynos_dp_parse_dt(const void *blob, struct edp_device_info *edp_info) |
| 868 | { |
| 869 | unsigned int node = fdtdec_next_compatible(blob, 0, |
| 870 | COMPAT_SAMSUNG_EXYNOS5_DP); |
| 871 | if (node <= 0) { |
| 872 | debug("exynos_dp: Can't get device node for dp\n"); |
| 873 | return -ENODEV; |
| 874 | } |
| 875 | |
| 876 | edp_info->disp_info.h_res = fdtdec_get_int(blob, node, |
| 877 | "samsung,h-res", 0); |
| 878 | edp_info->disp_info.h_sync_width = fdtdec_get_int(blob, node, |
| 879 | "samsung,h-sync-width", 0); |
| 880 | edp_info->disp_info.h_back_porch = fdtdec_get_int(blob, node, |
| 881 | "samsung,h-back-porch", 0); |
| 882 | edp_info->disp_info.h_front_porch = fdtdec_get_int(blob, node, |
| 883 | "samsung,h-front-porch", 0); |
| 884 | edp_info->disp_info.v_res = fdtdec_get_int(blob, node, |
| 885 | "samsung,v-res", 0); |
| 886 | edp_info->disp_info.v_sync_width = fdtdec_get_int(blob, node, |
| 887 | "samsung,v-sync-width", 0); |
| 888 | edp_info->disp_info.v_back_porch = fdtdec_get_int(blob, node, |
| 889 | "samsung,v-back-porch", 0); |
| 890 | edp_info->disp_info.v_front_porch = fdtdec_get_int(blob, node, |
| 891 | "samsung,v-front-porch", 0); |
| 892 | edp_info->disp_info.v_sync_rate = fdtdec_get_int(blob, node, |
| 893 | "samsung,v-sync-rate", 0); |
| 894 | |
| 895 | edp_info->lt_info.lt_status = fdtdec_get_int(blob, node, |
| 896 | "samsung,lt-status", 0); |
| 897 | |
| 898 | edp_info->video_info.master_mode = fdtdec_get_int(blob, node, |
| 899 | "samsung,master-mode", 0); |
| 900 | edp_info->video_info.bist_mode = fdtdec_get_int(blob, node, |
| 901 | "samsung,bist-mode", 0); |
| 902 | edp_info->video_info.bist_pattern = fdtdec_get_int(blob, node, |
| 903 | "samsung,bist-pattern", 0); |
| 904 | edp_info->video_info.h_sync_polarity = fdtdec_get_int(blob, node, |
| 905 | "samsung,h-sync-polarity", 0); |
| 906 | edp_info->video_info.v_sync_polarity = fdtdec_get_int(blob, node, |
| 907 | "samsung,v-sync-polarity", 0); |
| 908 | edp_info->video_info.interlaced = fdtdec_get_int(blob, node, |
| 909 | "samsung,interlaced", 0); |
| 910 | edp_info->video_info.color_space = fdtdec_get_int(blob, node, |
| 911 | "samsung,color-space", 0); |
| 912 | edp_info->video_info.dynamic_range = fdtdec_get_int(blob, node, |
| 913 | "samsung,dynamic-range", 0); |
| 914 | edp_info->video_info.ycbcr_coeff = fdtdec_get_int(blob, node, |
| 915 | "samsung,ycbcr-coeff", 0); |
| 916 | edp_info->video_info.color_depth = fdtdec_get_int(blob, node, |
| 917 | "samsung,color-depth", 0); |
| 918 | return 0; |
| 919 | } |
| 920 | #endif |
Donghwa Lee | b73a88b | 2012-07-02 01:16:02 +0000 | [diff] [blame] | 921 | |
| 922 | unsigned int exynos_init_dp(void) |
| 923 | { |
| 924 | unsigned int ret; |
| 925 | struct edp_device_info *edp_info; |
Donghwa Lee | b73a88b | 2012-07-02 01:16:02 +0000 | [diff] [blame] | 926 | |
| 927 | edp_info = kzalloc(sizeof(struct edp_device_info), GFP_KERNEL); |
| 928 | if (!edp_info) { |
| 929 | debug("failed to allocate edp device object.\n"); |
| 930 | return -EFAULT; |
| 931 | } |
| 932 | |
Ajay Kumar | 65f50f9 | 2013-02-21 23:53:06 +0000 | [diff] [blame^] | 933 | #ifdef CONFIG_OF_CONTROL |
| 934 | if (exynos_dp_parse_dt(gd->fdt_blob, edp_info)) |
| 935 | debug("unable to parse DP DT node\n"); |
| 936 | #else |
Donghwa Lee | b73a88b | 2012-07-02 01:16:02 +0000 | [diff] [blame] | 937 | edp_info = dp_pd->edp_dev_info; |
| 938 | if (edp_info == NULL) { |
| 939 | debug("failed to get edp_info data.\n"); |
| 940 | return -EFAULT; |
| 941 | } |
Ajay Kumar | 65f50f9 | 2013-02-21 23:53:06 +0000 | [diff] [blame^] | 942 | #endif |
Donghwa Lee | b73a88b | 2012-07-02 01:16:02 +0000 | [diff] [blame] | 943 | |
Ajay Kumar | ca7c3e1 | 2013-02-21 23:53:04 +0000 | [diff] [blame] | 944 | exynos_dp_set_base_addr(); |
| 945 | |
Donghwa Lee | b73a88b | 2012-07-02 01:16:02 +0000 | [diff] [blame] | 946 | exynos_dp_disp_info(&edp_info->disp_info); |
| 947 | |
Ajay Kumar | d6092d9 | 2013-02-21 23:52:58 +0000 | [diff] [blame] | 948 | exynos_set_dp_phy(1); |
Donghwa Lee | b73a88b | 2012-07-02 01:16:02 +0000 | [diff] [blame] | 949 | |
| 950 | ret = exynos_dp_init_dp(); |
| 951 | if (ret != EXYNOS_DP_SUCCESS) { |
| 952 | printf("DP exynos_dp_init_dp() failed\n"); |
| 953 | return ret; |
| 954 | } |
| 955 | |
| 956 | ret = exynos_dp_handle_edid(edp_info); |
| 957 | if (ret != EXYNOS_DP_SUCCESS) { |
| 958 | printf("EDP handle_edid fail\n"); |
| 959 | return ret; |
| 960 | } |
| 961 | |
| 962 | ret = exynos_dp_set_link_train(edp_info); |
| 963 | if (ret != EXYNOS_DP_SUCCESS) { |
| 964 | printf("DP link training fail\n"); |
| 965 | return ret; |
| 966 | } |
| 967 | |
| 968 | exynos_dp_enable_scramble(DP_ENABLE); |
| 969 | exynos_dp_enable_rx_to_enhanced_mode(DP_ENABLE); |
| 970 | exynos_dp_enable_enhanced_mode(DP_ENABLE); |
| 971 | |
| 972 | exynos_dp_set_link_bandwidth(edp_info->lane_bw); |
| 973 | exynos_dp_set_lane_count(edp_info->lane_cnt); |
| 974 | |
| 975 | exynos_dp_init_video(); |
| 976 | ret = exynos_dp_config_video(edp_info); |
| 977 | if (ret != EXYNOS_DP_SUCCESS) { |
| 978 | printf("Exynos DP init failed\n"); |
| 979 | return ret; |
| 980 | } |
| 981 | |
| 982 | printf("Exynos DP init done\n"); |
| 983 | |
| 984 | return ret; |
| 985 | } |
| 986 | |
| 987 | void exynos_set_dp_platform_data(struct exynos_dp_platform_data *pd) |
| 988 | { |
| 989 | if (pd == NULL) { |
| 990 | debug("pd is NULL\n"); |
| 991 | return; |
| 992 | } |
| 993 | |
| 994 | dp_pd = pd; |
| 995 | } |