| Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 1 | * Freescale i.MX6 SoloX IOMUX Controller |
| 2 | |
| 3 | Please refer to fsl,imx-pinctrl.txt in this directory for common binding part |
| 4 | and usage. |
| 5 | |
| 6 | Required properties: |
| 7 | - compatible: "fsl,imx6sx-iomuxc" |
| 8 | - fsl,pins: each entry consists of 6 integers and represents the mux and config |
| 9 | setting for one pin. The first 5 integers <mux_reg conf_reg input_reg mux_val |
| 10 | input_val> are specified using a PIN_FUNC_ID macro, which can be found in |
| 11 | imx6sx-pinfunc.h under device tree source folder. The last integer CONFIG is |
| 12 | the pad setting value like pull-up on this pin. Please refer to i.MX6 SoloX |
| 13 | Reference Manual for detailed CONFIG settings. |
| 14 | |
| 15 | CONFIG bits definition: |
| 16 | PAD_CTL_HYS (1 << 16) |
| 17 | PAD_CTL_PUS_100K_DOWN (0 << 14) |
| 18 | PAD_CTL_PUS_47K_UP (1 << 14) |
| 19 | PAD_CTL_PUS_100K_UP (2 << 14) |
| 20 | PAD_CTL_PUS_22K_UP (3 << 14) |
| 21 | PAD_CTL_PUE (1 << 13) |
| 22 | PAD_CTL_PKE (1 << 12) |
| 23 | PAD_CTL_ODE (1 << 11) |
| 24 | PAD_CTL_SPEED_LOW (0 << 6) |
| 25 | PAD_CTL_SPEED_MED (1 << 6) |
| 26 | PAD_CTL_SPEED_HIGH (3 << 6) |
| 27 | PAD_CTL_DSE_DISABLE (0 << 3) |
| 28 | PAD_CTL_DSE_260ohm (1 << 3) |
| 29 | PAD_CTL_DSE_130ohm (2 << 3) |
| 30 | PAD_CTL_DSE_87ohm (3 << 3) |
| 31 | PAD_CTL_DSE_65ohm (4 << 3) |
| 32 | PAD_CTL_DSE_52ohm (5 << 3) |
| 33 | PAD_CTL_DSE_43ohm (6 << 3) |
| 34 | PAD_CTL_DSE_37ohm (7 << 3) |
| 35 | PAD_CTL_SRE_FAST (1 << 0) |
| 36 | PAD_CTL_SRE_SLOW (0 << 0) |