blob: 5674d42b6dca826b2118f8a6f6d3053fe9117a98 [file] [log] [blame]
Mike Frysinger83ebf372010-06-02 04:17:26 -04001/*
2 * GPIO Abstraction Layer
3 *
4 * Copyright 2006-2010 Analog Devices Inc.
5 *
6 * Licensed under the GPL-2 or later
7 */
8
9#include <common.h>
10#include <asm/errno.h>
11#include <asm/gpio.h>
12#include <asm/portmux.h>
13
14#if ANOMALY_05000311 || ANOMALY_05000323
15enum {
16 AWA_data = SYSCR,
17 AWA_data_clear = SYSCR,
18 AWA_data_set = SYSCR,
19 AWA_toggle = SYSCR,
20 AWA_maska = UART_SCR,
21 AWA_maska_clear = UART_SCR,
22 AWA_maska_set = UART_SCR,
23 AWA_maska_toggle = UART_SCR,
24 AWA_maskb = UART_GCTL,
25 AWA_maskb_clear = UART_GCTL,
26 AWA_maskb_set = UART_GCTL,
27 AWA_maskb_toggle = UART_GCTL,
28 AWA_dir = SPORT1_STAT,
29 AWA_polar = SPORT1_STAT,
30 AWA_edge = SPORT1_STAT,
31 AWA_both = SPORT1_STAT,
32#if ANOMALY_05000311
33 AWA_inen = TIMER_ENABLE,
34#elif ANOMALY_05000323
35 AWA_inen = DMA1_1_CONFIG,
36#endif
37};
38 /* Anomaly Workaround */
39#define AWA_DUMMY_READ(name) bfin_read16(AWA_ ## name)
40#else
41#define AWA_DUMMY_READ(...) do { } while (0)
42#endif
43
44static struct gpio_port_t * const gpio_array[] = {
45#if defined(BF533_FAMILY)
46 (struct gpio_port_t *) FIO_FLAG_D,
47#elif defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x) \
Mike Frysinger134db0d2010-12-17 15:25:09 -050048 || defined(BF538_FAMILY) || defined(CONFIG_BF50x)
Mike Frysinger83ebf372010-06-02 04:17:26 -040049 (struct gpio_port_t *) PORTFIO,
50# if !defined(BF538_FAMILY)
51 (struct gpio_port_t *) PORTGIO,
52 (struct gpio_port_t *) PORTHIO,
53# endif
54#elif defined(BF561_FAMILY)
55 (struct gpio_port_t *) FIO0_FLAG_D,
56 (struct gpio_port_t *) FIO1_FLAG_D,
57 (struct gpio_port_t *) FIO2_FLAG_D,
58#elif defined(CONFIG_BF54x)
59 (struct gpio_port_t *)PORTA_FER,
60 (struct gpio_port_t *)PORTB_FER,
61 (struct gpio_port_t *)PORTC_FER,
62 (struct gpio_port_t *)PORTD_FER,
63 (struct gpio_port_t *)PORTE_FER,
64 (struct gpio_port_t *)PORTF_FER,
65 (struct gpio_port_t *)PORTG_FER,
66 (struct gpio_port_t *)PORTH_FER,
67 (struct gpio_port_t *)PORTI_FER,
68 (struct gpio_port_t *)PORTJ_FER,
69#else
70# error no gpio arrays defined
71#endif
72};
73
Mike Frysinger134db0d2010-12-17 15:25:09 -050074#if defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x) || \
75 defined(CONFIG_BF50x)
Mike Frysinger83ebf372010-06-02 04:17:26 -040076static unsigned short * const port_fer[] = {
77 (unsigned short *) PORTF_FER,
78 (unsigned short *) PORTG_FER,
79 (unsigned short *) PORTH_FER,
80};
81
82# if !defined(BF537_FAMILY)
83static unsigned short * const port_mux[] = {
84 (unsigned short *) PORTF_MUX,
85 (unsigned short *) PORTG_MUX,
86 (unsigned short *) PORTH_MUX,
87};
88
89static const
90u8 pmux_offset[][16] = {
91# if defined(CONFIG_BF52x)
92 { 0, 0, 0, 0, 0, 0, 0, 0, 2, 2, 4, 6, 8, 8, 10, 10 }, /* PORTF */
93 { 0, 0, 0, 0, 0, 2, 2, 4, 4, 6, 8, 10, 10, 10, 12, 12 }, /* PORTG */
94 { 0, 0, 0, 0, 0, 0, 0, 0, 2, 4, 4, 4, 4, 4, 4, 4 }, /* PORTH */
95# elif defined(CONFIG_BF51x)
96 { 0, 2, 2, 2, 2, 2, 2, 4, 6, 6, 6, 8, 8, 8, 8, 10 }, /* PORTF */
97 { 0, 0, 0, 2, 4, 6, 6, 6, 8, 10, 10, 12, 14, 14, 14, 14 }, /* PORTG */
98 { 0, 0, 0, 0, 2, 2, 4, 6, 10, 10, 10, 10, 10, 10, 10, 10 }, /* PORTH */
99# endif
100};
101# endif
102
103#elif defined(BF538_FAMILY)
104static unsigned short * const port_fer[] = {
105 (unsigned short *) PORTCIO_FER,
106 (unsigned short *) PORTDIO_FER,
107 (unsigned short *) PORTEIO_FER,
108};
109#endif
110
111#ifdef CONFIG_BFIN_GPIO_TRACK
112#define RESOURCE_LABEL_SIZE 16
113
114static struct str_ident {
115 char name[RESOURCE_LABEL_SIZE];
116} str_ident[MAX_RESOURCES];
117
118static void gpio_error(unsigned gpio)
119{
120 printf("bfin-gpio: GPIO %d wasn't requested!\n", gpio);
121}
122
123static void set_label(unsigned short ident, const char *label)
124{
125 if (label) {
126 strncpy(str_ident[ident].name, label,
127 RESOURCE_LABEL_SIZE);
128 str_ident[ident].name[RESOURCE_LABEL_SIZE - 1] = 0;
129 }
130}
131
132static char *get_label(unsigned short ident)
133{
134 return (*str_ident[ident].name ? str_ident[ident].name : "UNKNOWN");
135}
136
137static int cmp_label(unsigned short ident, const char *label)
138{
139 if (label == NULL)
140 printf("bfin-gpio: please provide none-null label\n");
141
142 if (label)
143 return strcmp(str_ident[ident].name, label);
144 else
145 return -EINVAL;
146}
147
148#define map_entry(m, i) reserved_##m##_map[gpio_bank(i)]
149#define is_reserved(m, i, e) (map_entry(m, i) & gpio_bit(i))
150#define reserve(m, i) (map_entry(m, i) |= gpio_bit(i))
151#define unreserve(m, i) (map_entry(m, i) &= ~gpio_bit(i))
152#define DECLARE_RESERVED_MAP(m, c) static unsigned short reserved_##m##_map[c]
153#else
154#define is_reserved(m, i, e) (!(e))
155#define reserve(m, i)
156#define unreserve(m, i)
157#define DECLARE_RESERVED_MAP(m, c)
158#define gpio_error(gpio)
159#define set_label(...)
160#define get_label(...) ""
161#define cmp_label(...) 1
162#endif
163
164DECLARE_RESERVED_MAP(gpio, GPIO_BANK_NUM);
165DECLARE_RESERVED_MAP(peri, gpio_bank(MAX_RESOURCES));
166
167inline int check_gpio(unsigned gpio)
168{
169#if defined(CONFIG_BF54x)
170 if (gpio == GPIO_PB15 || gpio == GPIO_PC14 || gpio == GPIO_PC15
171 || gpio == GPIO_PH14 || gpio == GPIO_PH15
172 || gpio == GPIO_PJ14 || gpio == GPIO_PJ15)
173 return -EINVAL;
174#endif
175 if (gpio >= MAX_BLACKFIN_GPIOS)
176 return -EINVAL;
177 return 0;
178}
179
180static void port_setup(unsigned gpio, unsigned short usage)
181{
182#if defined(BF538_FAMILY)
183 /*
184 * BF538/9 Port C,D and E are special.
185 * Inverted PORT_FER polarity on CDE and no PORF_FER on F
186 * Regular PORT F GPIOs are handled here, CDE are exclusively
187 * managed by GPIOLIB
188 */
189
190 if (gpio < MAX_BLACKFIN_GPIOS || gpio >= MAX_RESOURCES)
191 return;
192
193 gpio -= MAX_BLACKFIN_GPIOS;
194
195 if (usage == GPIO_USAGE)
196 *port_fer[gpio_bank(gpio)] |= gpio_bit(gpio);
197 else
198 *port_fer[gpio_bank(gpio)] &= ~gpio_bit(gpio);
199 SSYNC();
200 return;
201#endif
202
203 if (check_gpio(gpio))
204 return;
205
Mike Frysinger134db0d2010-12-17 15:25:09 -0500206#if defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x) || \
207 defined(CONFIG_BF50x)
Mike Frysinger83ebf372010-06-02 04:17:26 -0400208 if (usage == GPIO_USAGE)
209 *port_fer[gpio_bank(gpio)] &= ~gpio_bit(gpio);
210 else
211 *port_fer[gpio_bank(gpio)] |= gpio_bit(gpio);
212 SSYNC();
213#elif defined(CONFIG_BF54x)
214 if (usage == GPIO_USAGE)
215 gpio_array[gpio_bank(gpio)]->port_fer &= ~gpio_bit(gpio);
216 else
217 gpio_array[gpio_bank(gpio)]->port_fer |= gpio_bit(gpio);
218 SSYNC();
219#endif
220}
221
222#ifdef BF537_FAMILY
223static struct {
224 unsigned short res;
225 unsigned short offset;
226} port_mux_lut[] = {
227 {.res = P_PPI0_D13, .offset = 11},
228 {.res = P_PPI0_D14, .offset = 11},
229 {.res = P_PPI0_D15, .offset = 11},
230 {.res = P_SPORT1_TFS, .offset = 11},
231 {.res = P_SPORT1_TSCLK, .offset = 11},
232 {.res = P_SPORT1_DTPRI, .offset = 11},
233 {.res = P_PPI0_D10, .offset = 10},
234 {.res = P_PPI0_D11, .offset = 10},
235 {.res = P_PPI0_D12, .offset = 10},
236 {.res = P_SPORT1_RSCLK, .offset = 10},
237 {.res = P_SPORT1_RFS, .offset = 10},
238 {.res = P_SPORT1_DRPRI, .offset = 10},
239 {.res = P_PPI0_D8, .offset = 9},
240 {.res = P_PPI0_D9, .offset = 9},
241 {.res = P_SPORT1_DRSEC, .offset = 9},
242 {.res = P_SPORT1_DTSEC, .offset = 9},
243 {.res = P_TMR2, .offset = 8},
244 {.res = P_PPI0_FS3, .offset = 8},
245 {.res = P_TMR3, .offset = 7},
246 {.res = P_SPI0_SSEL4, .offset = 7},
247 {.res = P_TMR4, .offset = 6},
248 {.res = P_SPI0_SSEL5, .offset = 6},
249 {.res = P_TMR5, .offset = 5},
250 {.res = P_SPI0_SSEL6, .offset = 5},
251 {.res = P_UART1_RX, .offset = 4},
252 {.res = P_UART1_TX, .offset = 4},
253 {.res = P_TMR6, .offset = 4},
254 {.res = P_TMR7, .offset = 4},
255 {.res = P_UART0_RX, .offset = 3},
256 {.res = P_UART0_TX, .offset = 3},
257 {.res = P_DMAR0, .offset = 3},
258 {.res = P_DMAR1, .offset = 3},
259 {.res = P_SPORT0_DTSEC, .offset = 1},
260 {.res = P_SPORT0_DRSEC, .offset = 1},
261 {.res = P_CAN0_RX, .offset = 1},
262 {.res = P_CAN0_TX, .offset = 1},
263 {.res = P_SPI0_SSEL7, .offset = 1},
264 {.res = P_SPORT0_TFS, .offset = 0},
265 {.res = P_SPORT0_DTPRI, .offset = 0},
266 {.res = P_SPI0_SSEL2, .offset = 0},
267 {.res = P_SPI0_SSEL3, .offset = 0},
268};
269
270static void portmux_setup(unsigned short per)
271{
272 u16 y, offset, muxreg;
273 u16 function = P_FUNCT2MUX(per);
274
275 for (y = 0; y < ARRAY_SIZE(port_mux_lut); y++) {
276 if (port_mux_lut[y].res == per) {
277
278 /* SET PORTMUX REG */
279
280 offset = port_mux_lut[y].offset;
281 muxreg = bfin_read_PORT_MUX();
282
283 if (offset != 1)
284 muxreg &= ~(1 << offset);
285 else
286 muxreg &= ~(3 << 1);
287
288 muxreg |= (function << offset);
289 bfin_write_PORT_MUX(muxreg);
290 }
291 }
292}
293#elif defined(CONFIG_BF54x)
294inline void portmux_setup(unsigned short per)
295{
296 u32 pmux;
297 u16 ident = P_IDENT(per);
298 u16 function = P_FUNCT2MUX(per);
299
300 pmux = gpio_array[gpio_bank(ident)]->port_mux;
301
302 pmux &= ~(0x3 << (2 * gpio_sub_n(ident)));
303 pmux |= (function & 0x3) << (2 * gpio_sub_n(ident));
304
305 gpio_array[gpio_bank(ident)]->port_mux = pmux;
306}
307
308inline u16 get_portmux(unsigned short per)
309{
310 u32 pmux;
311 u16 ident = P_IDENT(per);
312
313 pmux = gpio_array[gpio_bank(ident)]->port_mux;
314
315 return (pmux >> (2 * gpio_sub_n(ident)) & 0x3);
316}
317#elif defined(CONFIG_BF52x) || defined(CONFIG_BF51x)
318inline void portmux_setup(unsigned short per)
319{
320 u16 pmux, ident = P_IDENT(per), function = P_FUNCT2MUX(per);
321 u8 offset = pmux_offset[gpio_bank(ident)][gpio_sub_n(ident)];
322
323 pmux = *port_mux[gpio_bank(ident)];
324 pmux &= ~(3 << offset);
325 pmux |= (function & 3) << offset;
326 *port_mux[gpio_bank(ident)] = pmux;
327 SSYNC();
328}
329#else
330# define portmux_setup(...) do { } while (0)
331#endif
332
333#ifndef CONFIG_BF54x
334/***********************************************************
335*
336* FUNCTIONS: Blackfin General Purpose Ports Access Functions
337*
338* INPUTS/OUTPUTS:
339* gpio - GPIO Number between 0 and MAX_BLACKFIN_GPIOS
340*
341*
342* DESCRIPTION: These functions abstract direct register access
343* to Blackfin processor General Purpose
344* Ports Regsiters
345*
346* CAUTION: These functions do not belong to the GPIO Driver API
347*************************************************************
348* MODIFICATION HISTORY :
349**************************************************************/
350
351/* Set a specific bit */
352
353#define SET_GPIO(name) \
354void set_gpio_ ## name(unsigned gpio, unsigned short arg) \
355{ \
356 unsigned long flags; \
357 local_irq_save(flags); \
358 if (arg) \
359 gpio_array[gpio_bank(gpio)]->name |= gpio_bit(gpio); \
360 else \
361 gpio_array[gpio_bank(gpio)]->name &= ~gpio_bit(gpio); \
362 AWA_DUMMY_READ(name); \
363 local_irq_restore(flags); \
364}
365
366SET_GPIO(dir) /* set_gpio_dir() */
367SET_GPIO(inen) /* set_gpio_inen() */
368SET_GPIO(polar) /* set_gpio_polar() */
369SET_GPIO(edge) /* set_gpio_edge() */
370SET_GPIO(both) /* set_gpio_both() */
371
372
373#define SET_GPIO_SC(name) \
374void set_gpio_ ## name(unsigned gpio, unsigned short arg) \
375{ \
376 unsigned long flags; \
377 if (ANOMALY_05000311 || ANOMALY_05000323) \
378 local_irq_save(flags); \
379 if (arg) \
380 gpio_array[gpio_bank(gpio)]->name ## _set = gpio_bit(gpio); \
381 else \
382 gpio_array[gpio_bank(gpio)]->name ## _clear = gpio_bit(gpio); \
383 if (ANOMALY_05000311 || ANOMALY_05000323) { \
384 AWA_DUMMY_READ(name); \
385 local_irq_restore(flags); \
386 } \
387}
388
389SET_GPIO_SC(maska)
390SET_GPIO_SC(maskb)
391SET_GPIO_SC(data)
392
393void set_gpio_toggle(unsigned gpio)
394{
395 unsigned long flags;
396 if (ANOMALY_05000311 || ANOMALY_05000323)
397 local_irq_save(flags);
398 gpio_array[gpio_bank(gpio)]->toggle = gpio_bit(gpio);
399 if (ANOMALY_05000311 || ANOMALY_05000323) {
400 AWA_DUMMY_READ(toggle);
401 local_irq_restore(flags);
402 }
403}
404
405/* Set current PORT date (16-bit word) */
406
407#define SET_GPIO_P(name) \
408void set_gpiop_ ## name(unsigned gpio, unsigned short arg) \
409{ \
410 unsigned long flags; \
411 if (ANOMALY_05000311 || ANOMALY_05000323) \
412 local_irq_save(flags); \
413 gpio_array[gpio_bank(gpio)]->name = arg; \
414 if (ANOMALY_05000311 || ANOMALY_05000323) { \
415 AWA_DUMMY_READ(name); \
416 local_irq_restore(flags); \
417 } \
418}
419
420SET_GPIO_P(data)
421SET_GPIO_P(dir)
422SET_GPIO_P(inen)
423SET_GPIO_P(polar)
424SET_GPIO_P(edge)
425SET_GPIO_P(both)
426SET_GPIO_P(maska)
427SET_GPIO_P(maskb)
428
429/* Get a specific bit */
430#define GET_GPIO(name) \
431unsigned short get_gpio_ ## name(unsigned gpio) \
432{ \
433 unsigned long flags; \
434 unsigned short ret; \
435 if (ANOMALY_05000311 || ANOMALY_05000323) \
436 local_irq_save(flags); \
437 ret = 0x01 & (gpio_array[gpio_bank(gpio)]->name >> gpio_sub_n(gpio)); \
438 if (ANOMALY_05000311 || ANOMALY_05000323) { \
439 AWA_DUMMY_READ(name); \
440 local_irq_restore(flags); \
441 } \
442 return ret; \
443}
444
445GET_GPIO(data)
446GET_GPIO(dir)
447GET_GPIO(inen)
448GET_GPIO(polar)
449GET_GPIO(edge)
450GET_GPIO(both)
451GET_GPIO(maska)
452GET_GPIO(maskb)
453
454/* Get current PORT date (16-bit word) */
455
456#define GET_GPIO_P(name) \
457unsigned short get_gpiop_ ## name(unsigned gpio) \
458{ \
459 unsigned long flags; \
460 unsigned short ret; \
461 if (ANOMALY_05000311 || ANOMALY_05000323) \
462 local_irq_save(flags); \
463 ret = (gpio_array[gpio_bank(gpio)]->name); \
464 if (ANOMALY_05000311 || ANOMALY_05000323) { \
465 AWA_DUMMY_READ(name); \
466 local_irq_restore(flags); \
467 } \
468 return ret; \
469}
470
471GET_GPIO_P(data)
472GET_GPIO_P(dir)
473GET_GPIO_P(inen)
474GET_GPIO_P(polar)
475GET_GPIO_P(edge)
476GET_GPIO_P(both)
477GET_GPIO_P(maska)
478GET_GPIO_P(maskb)
479
480#else /* CONFIG_BF54x */
481
482unsigned short get_gpio_dir(unsigned gpio)
483{
484 return (0x01 & (gpio_array[gpio_bank(gpio)]->dir_clear >> gpio_sub_n(gpio)));
485}
486
487#endif /* CONFIG_BF54x */
488
489/***********************************************************
490*
491* FUNCTIONS: Blackfin Peripheral Resource Allocation
492* and PortMux Setup
493*
494* INPUTS/OUTPUTS:
495* per Peripheral Identifier
496* label String
497*
498* DESCRIPTION: Blackfin Peripheral Resource Allocation and Setup API
499*
500* CAUTION:
501*************************************************************
502* MODIFICATION HISTORY :
503**************************************************************/
504
505int peripheral_request(unsigned short per, const char *label)
506{
507 unsigned short ident = P_IDENT(per);
508
509 /*
510 * Don't cares are pins with only one dedicated function
511 */
512
513 if (per & P_DONTCARE)
514 return 0;
515
516 if (!(per & P_DEFINED))
517 return -ENODEV;
518
519 BUG_ON(ident >= MAX_RESOURCES);
520
521 /* If a pin can be muxed as either GPIO or peripheral, make
522 * sure it is not already a GPIO pin when we request it.
523 */
524 if (unlikely(!check_gpio(ident) && is_reserved(gpio, ident, 1))) {
525 printf("%s: Peripheral %d is already reserved as GPIO by %s !\n",
526 __func__, ident, get_label(ident));
527 return -EBUSY;
528 }
529
530 if (unlikely(is_reserved(peri, ident, 1))) {
531
532 /*
533 * Pin functions like AMC address strobes my
534 * be requested and used by several drivers
535 */
536
537#ifdef CONFIG_BF54x
538 if (!((per & P_MAYSHARE) && get_portmux(per) == P_FUNCT2MUX(per))) {
539#else
540 if (!(per & P_MAYSHARE)) {
541#endif
542 /*
543 * Allow that the identical pin function can
544 * be requested from the same driver twice
545 */
546
547 if (cmp_label(ident, label) == 0)
548 goto anyway;
549
550 printf("%s: Peripheral %d function %d is already reserved by %s !\n",
551 __func__, ident, P_FUNCT2MUX(per), get_label(ident));
552 return -EBUSY;
553 }
554 }
555
556 anyway:
557 reserve(peri, ident);
558
559 portmux_setup(per);
560 port_setup(ident, PERIPHERAL_USAGE);
561
562 set_label(ident, label);
563
564 return 0;
565}
566
567int peripheral_request_list(const unsigned short per[], const char *label)
568{
569 u16 cnt;
570 int ret;
571
572 for (cnt = 0; per[cnt] != 0; cnt++) {
573
574 ret = peripheral_request(per[cnt], label);
575
576 if (ret < 0) {
577 for ( ; cnt > 0; cnt--)
578 peripheral_free(per[cnt - 1]);
579
580 return ret;
581 }
582 }
583
584 return 0;
585}
586
587void peripheral_free(unsigned short per)
588{
589 unsigned short ident = P_IDENT(per);
590
591 if (per & P_DONTCARE)
592 return;
593
594 if (!(per & P_DEFINED))
595 return;
596
597 if (unlikely(!is_reserved(peri, ident, 0)))
598 return;
599
600 if (!(per & P_MAYSHARE))
601 port_setup(ident, GPIO_USAGE);
602
603 unreserve(peri, ident);
604
605 set_label(ident, "free");
606}
607
608void peripheral_free_list(const unsigned short per[])
609{
610 u16 cnt;
611 for (cnt = 0; per[cnt] != 0; cnt++)
612 peripheral_free(per[cnt]);
613}
614
615/***********************************************************
616*
617* FUNCTIONS: Blackfin GPIO Driver
618*
619* INPUTS/OUTPUTS:
620* gpio PIO Number between 0 and MAX_BLACKFIN_GPIOS
621* label String
622*
623* DESCRIPTION: Blackfin GPIO Driver API
624*
625* CAUTION:
626*************************************************************
627* MODIFICATION HISTORY :
628**************************************************************/
629
630int bfin_gpio_request(unsigned gpio, const char *label)
631{
632 if (check_gpio(gpio) < 0)
633 return -EINVAL;
634
635 /*
636 * Allow that the identical GPIO can
637 * be requested from the same driver twice
638 * Do nothing and return -
639 */
640
641 if (cmp_label(gpio, label) == 0)
642 return 0;
643
644 if (unlikely(is_reserved(gpio, gpio, 1))) {
645 printf("bfin-gpio: GPIO %d is already reserved by %s !\n",
646 gpio, get_label(gpio));
647 return -EBUSY;
648 }
649 if (unlikely(is_reserved(peri, gpio, 1))) {
650 printf("bfin-gpio: GPIO %d is already reserved as Peripheral by %s !\n",
651 gpio, get_label(gpio));
652 return -EBUSY;
653 }
654#ifndef CONFIG_BF54x
655 else { /* Reset POLAR setting when acquiring a gpio for the first time */
656 set_gpio_polar(gpio, 0);
657 }
658#endif
659
660 reserve(gpio, gpio);
661 set_label(gpio, label);
662
663 port_setup(gpio, GPIO_USAGE);
664
665 return 0;
666}
667
Mike Frysinger63acf972011-05-10 12:56:58 -0400668#ifdef CONFIG_BFIN_GPIO_TRACK
Mike Frysinger83ebf372010-06-02 04:17:26 -0400669void bfin_gpio_free(unsigned gpio)
670{
671 if (check_gpio(gpio) < 0)
672 return;
673
674 if (unlikely(!is_reserved(gpio, gpio, 0))) {
675 gpio_error(gpio);
676 return;
677 }
678
679 unreserve(gpio, gpio);
680
681 set_label(gpio, "free");
682}
Mike Frysinger63acf972011-05-10 12:56:58 -0400683#endif
Mike Frysinger83ebf372010-06-02 04:17:26 -0400684
685#ifdef BFIN_SPECIAL_GPIO_BANKS
686DECLARE_RESERVED_MAP(special_gpio, gpio_bank(MAX_RESOURCES));
687
688int bfin_special_gpio_request(unsigned gpio, const char *label)
689{
690 /*
691 * Allow that the identical GPIO can
692 * be requested from the same driver twice
693 * Do nothing and return -
694 */
695
696 if (cmp_label(gpio, label) == 0)
697 return 0;
698
699 if (unlikely(is_reserved(special_gpio, gpio, 1))) {
700 printf("bfin-gpio: GPIO %d is already reserved by %s !\n",
701 gpio, get_label(gpio));
702 return -EBUSY;
703 }
704 if (unlikely(is_reserved(peri, gpio, 1))) {
705 printf("bfin-gpio: GPIO %d is already reserved as Peripheral by %s !\n",
706 gpio, get_label(gpio));
707
708 return -EBUSY;
709 }
710
711 reserve(special_gpio, gpio);
712 reserve(peri, gpio);
713
714 set_label(gpio, label);
715 port_setup(gpio, GPIO_USAGE);
716
717 return 0;
718}
719
720void bfin_special_gpio_free(unsigned gpio)
721{
722 if (unlikely(!is_reserved(special_gpio, gpio, 0))) {
723 gpio_error(gpio);
724 return;
725 }
726
727 reserve(special_gpio, gpio);
728 reserve(peri, gpio);
729 set_label(gpio, "free");
730}
731#endif
732
733static inline void __bfin_gpio_direction_input(unsigned gpio)
734{
735#ifdef CONFIG_BF54x
736 gpio_array[gpio_bank(gpio)]->dir_clear = gpio_bit(gpio);
737#else
738 gpio_array[gpio_bank(gpio)]->dir &= ~gpio_bit(gpio);
739#endif
740 gpio_array[gpio_bank(gpio)]->inen |= gpio_bit(gpio);
741}
742
743int bfin_gpio_direction_input(unsigned gpio)
744{
745 unsigned long flags;
746
747 if (!is_reserved(gpio, gpio, 0)) {
748 gpio_error(gpio);
749 return -EINVAL;
750 }
751
752 local_irq_save(flags);
753 __bfin_gpio_direction_input(gpio);
754 AWA_DUMMY_READ(inen);
755 local_irq_restore(flags);
756
757 return 0;
758}
759
760void bfin_gpio_toggle_value(unsigned gpio)
761{
762#ifdef CONFIG_BF54x
763 gpio_set_value(gpio, !gpio_get_value(gpio));
764#else
765 gpio_array[gpio_bank(gpio)]->toggle = gpio_bit(gpio);
766#endif
767}
768
769void bfin_gpio_set_value(unsigned gpio, int arg)
770{
771 if (arg)
772 gpio_array[gpio_bank(gpio)]->data_set = gpio_bit(gpio);
773 else
774 gpio_array[gpio_bank(gpio)]->data_clear = gpio_bit(gpio);
775}
776
777int bfin_gpio_direction_output(unsigned gpio, int value)
778{
779 unsigned long flags;
780
781 if (!is_reserved(gpio, gpio, 0)) {
782 gpio_error(gpio);
783 return -EINVAL;
784 }
785
786 local_irq_save(flags);
787
788 gpio_array[gpio_bank(gpio)]->inen &= ~gpio_bit(gpio);
789 gpio_set_value(gpio, value);
790#ifdef CONFIG_BF54x
791 gpio_array[gpio_bank(gpio)]->dir_set = gpio_bit(gpio);
792#else
793 gpio_array[gpio_bank(gpio)]->dir |= gpio_bit(gpio);
794#endif
795
796 AWA_DUMMY_READ(dir);
797 local_irq_restore(flags);
798
799 return 0;
800}
801
802int bfin_gpio_get_value(unsigned gpio)
803{
804#ifdef CONFIG_BF54x
805 return (1 & (gpio_array[gpio_bank(gpio)]->data >> gpio_sub_n(gpio)));
806#else
807 unsigned long flags;
808
809 if (unlikely(get_gpio_edge(gpio))) {
810 int ret;
811 local_irq_save(flags);
812 set_gpio_edge(gpio, 0);
813 ret = get_gpio_data(gpio);
814 set_gpio_edge(gpio, 1);
815 local_irq_restore(flags);
816 return ret;
817 } else
818 return get_gpio_data(gpio);
819#endif
820}
821
822/* If we are booting from SPI and our board lacks a strong enough pull up,
823 * the core can reset and execute the bootrom faster than the resistor can
824 * pull the signal logically high. To work around this (common) error in
825 * board design, we explicitly set the pin back to GPIO mode, force /CS
826 * high, and wait for the electrons to do their thing.
827 *
828 * This function only makes sense to be called from reset code, but it
829 * lives here as we need to force all the GPIO states w/out going through
830 * BUG() checks and such.
831 */
832void bfin_reset_boot_spi_cs(unsigned short pin)
833{
834 unsigned short gpio = P_IDENT(pin);
835 port_setup(gpio, GPIO_USAGE);
836 gpio_array[gpio_bank(gpio)]->data_set = gpio_bit(gpio);
837 AWA_DUMMY_READ(data_set);
838 udelay(1);
839}
840
841#ifdef CONFIG_BFIN_GPIO_TRACK
842void bfin_gpio_labels(void)
843{
844 int c, gpio;
845
846 for (c = 0; c < MAX_RESOURCES; c++) {
847 gpio = is_reserved(gpio, c, 1);
848 if (!check_gpio(c) && gpio)
849 printf("GPIO_%d:\t%s\tGPIO %s\n", c,
850 get_label(c),
851 get_gpio_dir(c) ? "OUTPUT" : "INPUT");
852 else if (is_reserved(peri, c, 1))
853 printf("GPIO_%d:\t%s\tPeripheral\n", c, get_label(c));
854 else
855 continue;
856 }
857}
858#endif