blob: f5fd53debbc8e0161628df1e98f63bae91da6058 [file] [log] [blame]
Tom Rini53633a82024-02-29 12:33:36 -05001# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/power/supply/maxim,max77693.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Maxim MAX77693 MicroUSB and Companion Power Management IC Charger
8
9maintainers:
10 - Krzysztof Kozlowski <krzk@kernel.org>
11
12description: |
13 This is a part of device tree bindings for Maxim MAX77693 MicroUSB Integrated
14 Circuit (MUIC).
15
16 See also Documentation/devicetree/bindings/mfd/maxim,max77693.yaml for
17 additional information and example.
18
19properties:
20 compatible:
21 const: maxim,max77693-charger
22
23 maxim,constant-microvolt:
24 description: |
25 Battery constant voltage in uV. The charger will operate in fast
26 charge constant current mode till battery voltage reaches this level.
27 Then the charger will switch to fast charge constant voltage mode.
28 Also vsys (system voltage) will be set to this value when DC power is
29 supplied but charger is not enabled.
30 Valid values: 3650000 - 4400000, step by 25000 (rounded down)
31 minimum: 3650000
32 maximum: 4400000
33 default: 4200000
34
35 maxim,min-system-microvolt:
36 description: |
37 Minimal system voltage in uV.
38 enum: [3000000, 3100000, 3200000, 3300000, 3400000, 3500000,
39 3600000, 3700000]
40 default: 3600000
41
42 maxim,thermal-regulation-celsius:
43 description: |
44 Temperature in Celsius for entering high temperature charging mode.
45 If die temperature exceeds this value the charging current will be
46 reduced by 105 mA/Celsius.
47 enum: [70, 85, 100, 115]
48 default: 100
49
50 maxim,battery-overcurrent-microamp:
51 description: |
52 Overcurrent protection threshold in uA (current from battery to
53 system).
54 Valid values: 2000000 - 3500000, step by 250000 (rounded down)
55 minimum: 2000000
56 maximum: 3500000
57 default: 3500000
58
59 maxim,charge-input-threshold-microvolt:
60 description: |
61 Threshold voltage in uV for triggering input voltage regulation loop.
62 If input voltage decreases below this value, the input current will
63 be reduced to reach the threshold voltage.
64 enum: [4300000, 4700000, 4800000, 4900000]
65 default: 4300000
66
67required:
68 - compatible
69
70additionalProperties: false