| Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 1 | # SPDX-License-Identifier: GPL-2.0 |
| 2 | %YAML 1.2 |
| 3 | --- |
| 4 | $id: http://devicetree.org/schemas/power/supply/maxim,ds2760.yaml# |
| 5 | $schema: http://devicetree.org/meta-schemas/core.yaml# |
| 6 | |
| 7 | title: Maxim DS2760 |
| 8 | |
| 9 | maintainers: |
| 10 | - Sebastian Reichel <sre@kernel.org> |
| 11 | |
| 12 | description: | |
| 13 | The ds2760 is a w1 slave device and must hence have its sub-node in |
| 14 | DT under a w1 bus master node. |
| 15 | |
| 16 | allOf: |
| 17 | - $ref: power-supply.yaml# |
| 18 | |
| 19 | properties: |
| 20 | compatible: |
| 21 | const: maxim,ds2760 |
| 22 | |
| 23 | maxim,pmod-enabled: |
| 24 | description: | |
| 25 | Allow the DS2760 to enter sleep mode when the DQ line goes low for more than 2 seconds |
| 26 | and leave sleep Mode when the DQ line goes high. |
| 27 | type: boolean |
| 28 | |
| 29 | maxim,cache-time-ms: |
| 30 | description: | |
| 31 | Time im milliseconds to cache the data for. |
| 32 | When this time expires, the values are read again from the hardware. |
| 33 | Defaults to 1000. |
| 34 | |
| 35 | rated-capacity-microamp-hours: |
| 36 | description: | |
| 37 | The rated capacity of the battery, in mAh. |
| 38 | If not specified, the value stored in the non-volatile chip memory is used. |
| 39 | |
| 40 | required: |
| 41 | - compatible |
| 42 | |
| 43 | unevaluatedProperties: false |