include/configs/voiceblue.h

/*
 * (C) Copyright 2005 2N TELEKOMUNIKACE, Ladislav Michl
 *
 * Configuation settings for the TI OMAP VoiceBlue board.
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#include <configs/omap1510.h>

/*
 * High Level Configuration Options
 * (easy to change)
 */
#define CONFIG_ARM925T	1		/* This is an arm925t CPU */
#define CONFIG_OMAP	1		/* in a TI OMAP core */
#define CONFIG_OMAP1510 1		/* which is in a 5910 */

/* Input clock of PLL */
#define CONFIG_SYS_CLK_FREQ	150000000	/* 150MHz input clock */
#define CONFIG_XTAL_FREQ	12000000

#undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff */

#define CONFIG_MISC_INIT_R		/* There is nothing to really init */
#define BOARD_LATE_INIT			/* but we flash the LEDs here */

#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS	1
#define CONFIG_INITRD_TAG		1

/*
 * Physical Memory Map
 */
#define CONFIG_NR_DRAM_BANKS	1		/* we have 1 bank of DRAM */
#define PHYS_SDRAM_1		0x10000000	/* SDRAM Bank #1 */
#define PHYS_SDRAM_1_SIZE	SZ_64M

#define PHYS_FLASH_1		0x00000000	/* Flash Bank #1 */
#define PHYS_FLASH_2		0x0c000000

#define CFG_LOAD_ADDR		PHYS_SDRAM_1 + 0x400000	/* default load address */

/*
 * FLASH organization
 */
#define CFG_FLASH_CFI			/* Flash is CFI conformant */
#define CFG_FLASH_CFI_DRIVER		/* Use the common driver */
#define CFG_MAX_FLASH_BANKS	1
#ifdef VOICEBLUE_SMALL_FLASH
#define CFG_FLASH_BANKS_LIST	{ PHYS_FLASH_2 }
#else
#define CFG_FLASH_BANKS_LIST	{ PHYS_FLASH_1 }
#endif

/* FIXME: Does not work on AMD flash */
/* #define CFG_FLASH_USE_BUFFER_WRITE 1 */	/* use buffered writes (20x faster) */
#define CFG_MAX_FLASH_SECT	512	/* max # of sectors on one chip */

#define CFG_MONITOR_BASE	PHYS_FLASH_1
#define CFG_MONITOR_LEN		SZ_128K

/*
 * Environment settings
 */
#ifdef VOICEBLUE_SMALL_FLASH
#define CFG_ENV_IS_NOWHERE
#define CFG_ENV_SIZE		SZ_1K
#else
#define CFG_ENV_IS_IN_FLASH
#define CFG_ENV_ADDR		(PHYS_FLASH_1 + CFG_MONITOR_LEN)
#define CFG_ENV_SIZE		SZ_8K
#define CFG_ENV_SECT_SIZE	SZ_64K
#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR + CFG_ENV_SECT_SIZE)
#define CFG_ENV_SIZE_REDUND	CFG_ENV_SIZE

#define CONFIG_ENV_OVERWRITE

#define CFG_JFFS_CUSTOM_PART	/* see board/voiceblue/jffs2parts.c */
#endif

/*
 * Size of malloc() pool and stack
 */
#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
#ifdef VOICEBLUE_SMALL_FLASH
#define CFG_MALLOC_LEN		(SZ_64K - CFG_GBL_DATA_SIZE)
#define CONFIG_STACKSIZE	SZ_8K
#else
#define CFG_MALLOC_LEN		SZ_4M
#define CONFIG_STACKSIZE	SZ_1M
#endif

/*
 * Hardware drivers
 */
#define CONFIG_DRIVER_SMC91111
#define CONFIG_SMC91111_BASE	0x08000300

/*
 * NS16550 Configuration
 */
#define CFG_NS16550
#define CFG_NS16550_SERIAL
#define CFG_NS16550_REG_SIZE	(-4)
#define CFG_NS16550_CLK		(CONFIG_XTAL_FREQ)	/* can be 12M/32Khz or 48Mhz  */
#define CFG_NS16550_COM1	OMAP1510_UART1_BASE	/* uart1 */

#define CONFIG_CONS_INDEX	1
#define CONFIG_BAUDRATE		115200
#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }

#ifdef VOICEBLUE_SMALL_FLASH
#define CONFIG_COMMANDS		(CFG_CMD_BDI    |	\
				 CFG_CMD_LOADB  |	\
				 CFG_CMD_IMI    |	\
				 CFG_CMD_FLASH  |	\
				 CFG_CMD_MEMORY |	\
				 CFG_CMD_NET    |	\
				 CFG_CMD_BOOTD  |	\
				 CFG_CMD_DHCP   |	\
				 CFG_CMD_PING   |	\
				 CFG_CMD_RUN)
#else
#define CONFIG_COMMANDS		(CFG_CMD_BDI    |	\
				 CFG_CMD_LOADB  |	\
				 CFG_CMD_IMI    |	\
				 CFG_CMD_FLASH  |	\
				 CFG_CMD_MEMORY |	\
				 CFG_CMD_NET    |	\
				 CFG_CMD_ENV    |	\
				 CFG_CMD_BOOTD  |	\
				 CFG_CMD_DHCP   |	\
				 CFG_CMD_PING   |	\
				 CFG_CMD_RUN    |	\
				 CFG_CMD_JFFS2)
#endif

#define CONFIG_BOOTP_MASK	CONFIG_BOOTP_DEFAULT
#define CONFIG_LOOPW

#ifdef VOICEBLUE_SMALL_FLASH
#define CONFIG_BOOTDELAY	0
#undef  CONFIG_BOOTARGS		/* the preboot command will set bootargs*/
#define CFG_AUTOLOAD		"n"	/* no autoload */
#define CONFIG_PREBOOT		"run setup"
#define	CONFIG_EXTRA_ENV_SETTINGS				\
	"setup=setenv bootargs console=ttyS0,${baudrate} "	\
		"root=/dev/nfs ip=dhcp\0"			\
	"update=erase c000000 c03ffff; "			\
		"cp.b 10400000 c000000 ${filesize}\0"
#else
#define CONFIG_BOOTDELAY	3
#undef  CONFIG_BOOTARGS		/* boot command will set bootargs */
#define CFG_AUTOLOAD		"n"	/* no autoload */
#define CONFIG_BOOTCOMMAND	"run nboot"
#define CONFIG_PREBOOT		"run setup"
#define	CONFIG_EXTRA_ENV_SETTINGS				\
	"ospart=0\0"						\
	"swapos=no\0"						\
	"setpart="						\
	"if test $swapos = yes; then "				\
		"if test $ospart -eq 0; then chpart 4; else chpart 3; fi; "\
		"setenv swapos no; saveenv; "			\
	"else "							\
		"if test $ospart -eq 0; then chpart 3; else chpart 4; fi; "\
	"fi\0"							\
	"setup=setenv bootargs console=ttyS0,$baudrate "	\
		"mtdparts=$mtdparts\0"				\
	"nfsargs=run setpart; setenv bootargs $bootargs "	\
		"root=/dev/nfs ip=dhcp\0"			\
	"flashargs=run setpart; setenv bootargs $bootargs "	\
		"root=/dev/mtdblock$partition ro "		\
		"rootfstype=jffs2\0"				\
	"nboot=run nfsargs; bootp; tftp; bootm\0"		\
	"fboot=run flashargs; fsload /boot/uImage; bootm\0"
#endif

/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>

/*
 * Miscellaneous configurable options
 */
#ifndef VOICEBLUE_SMALL_FLASH
#define CFG_HUSH_PARSER
#define CFG_PROMPT_HUSH_PS2	"> "
#define CONFIG_AUTO_COMPLETE
#endif
#define CFG_LONGHELP				/* undef to save memory		*/
#define CFG_PROMPT		"# "		/* Monitor Command Prompt	*/
#define CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
#define CFG_MAXARGS		16		/* max number of command args	*/
#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/

#define CFG_MEMTEST_START	PHYS_SDRAM_1
#define CFG_MEMTEST_END		PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE

#undef	CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */

/* The 1510 has 3 timers, they can be driven by the RefClk (12Mhz) or by DPLL1.
 * This time is further subdivided by a local divisor.
 */
#define CFG_TIMERBASE		OMAP1510_TIMER1_BASE
#define CFG_PVT			7		/* 2^(pvt+1), divide by 256 */
#define CFG_HZ			((CONFIG_SYS_CLK_FREQ)/(2 << CFG_PVT))

#define OMAP5910_DPLL_DIV	1
#define OMAP5910_DPLL_MUL	((CONFIG_SYS_CLK_FREQ * \
				 (1 << OMAP5910_DPLL_DIV)) / CONFIG_XTAL_FREQ)

#define OMAP5910_ARM_PER_DIV	2	/* CKL/4 */
#define OMAP5910_LCD_DIV	2	/* CKL/4 */
#define OMAP5910_ARM_DIV	0	/* CKL/1 */
#define OMAP5910_DSP_DIV	0	/* CKL/1 */
#define OMAP5910_TC_DIV		1	/* CKL/2 */
#define OMAP5910_DSP_MMU_DIV	1	/* CKL/2 */
#define OMAP5910_ARM_TIM_SEL	1	/* CKL used for MPU timers */

#define OMAP5910_ARM_EN_CLK	0x03d6	/* 0000 0011 1101 0110b  Clock Enable */
#define OMAP5910_ARM_CKCTL	((OMAP5910_ARM_PER_DIV)  |	\
				 (OMAP5910_LCD_DIV << 2) |	\
				 (OMAP5910_ARM_DIV << 4) |	\
				 (OMAP5910_DSP_DIV << 6) |	\
				 (OMAP5910_TC_DIV << 8) |	\
				 (OMAP5910_DSP_MMU_DIV << 10) |	\
				 (OMAP5910_ARM_TIM_SEL << 12))

#define VOICEBLUE_LED_REG	0x04030000

/*
 * JFFS2 partitions
 *
 */
/* No command line, one static partition */
#undef CONFIG_JFFS2_CMDLINE
#define CONFIG_JFFS2_DEV		"nor0"
#define CONFIG_JFFS2_PART_SIZE		0xFFFFFFFF
#define CONFIG_JFFS2_PART_OFFSET	0x00040000

/* mtdparts command line support */
/* Note: fake mtd_id used, no linux mtd map file */
/*
#define CONFIG_JFFS2_CMDLINE
#define MTDIDS_DEFAULT		"nor0=voiceblue-0"
#define MTDPARTS_DEFAULT	"mtdparts=voiceblue-0:128k(uboot),64k(env),64k(renv),-(jffs2)"
*/

#endif	/* __CONFIG_H */