blob: 05df43b39b45198a25787d7dfc87bbc7cf371ade [file] [log] [blame]
Peng Fancbe5d382021-08-07 16:01:13 +08001/* SPDX-License-Identifier: GPL-2.0+ */
2/*
3 * Copyright 2020 NXP
4 */
5
6#ifndef __IMX8ULP_EVK_H
7#define __IMX8ULP_EVK_H
8
9#include <linux/sizes.h>
10#include <asm/arch/imx-regs.h>
11
12#define CONFIG_SYS_BOOTM_LEN (SZ_64M)
13#define CONFIG_SPL_MAX_SIZE (148 * 1024)
14#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
Peng Fancbe5d382021-08-07 16:01:13 +080015#define CONFIG_SYS_UBOOT_BASE (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
16
17#ifdef CONFIG_SPL_BUILD
Peng Fancbe5d382021-08-07 16:01:13 +080018#define CONFIG_SPL_STACK 0x22050000
19#define CONFIG_SPL_BSS_START_ADDR 0x22048000
20#define CONFIG_SPL_BSS_MAX_SIZE 0x2000 /* 8 KB */
21#define CONFIG_SYS_SPL_MALLOC_START 0x22040000
22#define CONFIG_SYS_SPL_MALLOC_SIZE 0x8000 /* 32 KB */
23
24#define CONFIG_MALLOC_F_ADDR 0x22040000
25
Peng Fancbe5d382021-08-07 16:01:13 +080026#define CONFIG_SPL_ABORT_ON_RAW_IMAGE /* For RAW image gives a error info not panic */
27
28#endif
29
Peng Fancbe5d382021-08-07 16:01:13 +080030/* ENET Config */
31#if defined(CONFIG_FEC_MXC)
Peng Fancbe5d382021-08-07 16:01:13 +080032#define PHY_ANEG_TIMEOUT 20000
33
Peng Fancbe5d382021-08-07 16:01:13 +080034#define CONFIG_FEC_MXC_PHYADDR 1
Peng Fancbe5d382021-08-07 16:01:13 +080035#endif
36
37#ifdef CONFIG_DISTRO_DEFAULTS
38#define BOOT_TARGET_DEVICES(func) \
39 func(MMC, mmc, 0)
40
41#include <config_distro_bootcmd.h>
42#else
43#define BOOTENV
44#endif
45
46/* Initial environment variables */
47#define CONFIG_EXTRA_ENV_SETTINGS \
48 BOOTENV \
Tom Rini9004ee02021-08-23 10:25:30 -040049 "scriptaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
50 "kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
Peng Fancbe5d382021-08-07 16:01:13 +080051 "image=Image\0" \
52 "console=ttyLP1,115200 earlycon\0" \
53 "fdt_addr_r=0x83000000\0" \
54 "boot_fit=no\0" \
55 "fdtfile=imx8ulp-evk.dtb\0" \
56 "initrd_addr=0x83800000\0" \
57 "bootm_size=0x10000000\0" \
Tom Rinib113bca2021-12-11 14:55:52 -050058 "mmcpart=1\0" \
Peng Fanbb4bb582022-04-15 12:23:41 +080059 "mmcroot=/dev/mmcblk2p2 rootwait rw\0" \
Peng Fancbe5d382021-08-07 16:01:13 +080060
61/* Link Definitions */
Peng Fancbe5d382021-08-07 16:01:13 +080062
63#define CONFIG_SYS_INIT_RAM_ADDR 0x80000000
64#define CONFIG_SYS_INIT_RAM_SIZE 0x80000
65#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
66#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
67
Peng Fancbe5d382021-08-07 16:01:13 +080068
Peng Fancbe5d382021-08-07 16:01:13 +080069#define CONFIG_SYS_SDRAM_BASE 0x80000000
70#define PHYS_SDRAM 0x80000000
71#define PHYS_SDRAM_SIZE 0x80000000 /* 2GB DDR */
72
73/* Monitor Command Prompt */
Peng Fancbe5d382021-08-07 16:01:13 +080074#define CONFIG_SYS_CBSIZE 2048
75#define CONFIG_SYS_MAXARGS 64
76#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
77#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
78
79/* Using ULP WDOG for reset */
80#define WDOG_BASE_ADDR WDG3_RBASE
81#endif