Tom Rini | 9c8af15 | 2024-12-24 12:03:04 -0600 | [diff] [blame] | 1 | // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 | /* |
| 3 | * Copyright (c) 2024 Amlogic, Inc. All rights reserved. |
| 4 | */ |
| 5 | |
| 6 | /dts-v1/; |
| 7 | |
| 8 | #include "amlogic-c3.dtsi" |
| 9 | |
| 10 | / { |
| 11 | model = "Amlogic C308l aw419 Development Board"; |
| 12 | compatible = "amlogic,aw419", "amlogic,c3"; |
| 13 | interrupt-parent = <&gic>; |
| 14 | #address-cells = <2>; |
| 15 | #size-cells = <2>; |
| 16 | |
| 17 | aliases { |
| 18 | serial0 = &uart_b; |
| 19 | spi0 = &spifc; |
| 20 | }; |
| 21 | |
| 22 | memory@0 { |
| 23 | device_type = "memory"; |
| 24 | reg = <0x0 0x0 0x0 0x80000000>; |
| 25 | }; |
| 26 | |
| 27 | reserved-memory { |
| 28 | #address-cells = <2>; |
| 29 | #size-cells = <2>; |
| 30 | ranges; |
| 31 | |
| 32 | /* 9 MiB reserved for ARM Trusted Firmware */ |
| 33 | secmon_reserved: secmon@7f00000 { |
| 34 | compatible = "shared-dma-pool"; |
| 35 | reg = <0x0 0x07f00000 0x0 0x900000>; |
| 36 | no-map; |
| 37 | }; |
| 38 | }; |
| 39 | |
| 40 | main_12v: regulator-main-12v { |
| 41 | compatible = "regulator-fixed"; |
| 42 | regulator-name = "12V"; |
| 43 | regulator-min-microvolt = <12000000>; |
| 44 | regulator-max-microvolt = <12000000>; |
| 45 | regulator-boot-on; |
| 46 | regulator-always-on; |
| 47 | }; |
| 48 | |
| 49 | vcc_5v: regulator-vcc-5v { |
| 50 | compatible = "regulator-fixed"; |
| 51 | regulator-name = "VCC5V"; |
| 52 | regulator-min-microvolt = <5000000>; |
| 53 | regulator-max-microvolt = <5000000>; |
| 54 | vin-supply = <&main_12v>; |
| 55 | regulator-boot-on; |
| 56 | regulator-always-on; |
| 57 | }; |
| 58 | |
| 59 | vddq: regulator-vddq { |
| 60 | compatible = "regulator-fixed"; |
| 61 | regulator-name = "VDDQ"; |
| 62 | regulator-min-microvolt = <1200000>; |
| 63 | regulator-max-microvolt = <1200000>; |
| 64 | vin-supply = <&main_12v>; |
| 65 | regulator-boot-on; |
| 66 | regulator-always-on; |
| 67 | }; |
| 68 | |
| 69 | vddao_3v3: regulator-vddao-3v3 { |
| 70 | compatible = "regulator-fixed"; |
| 71 | regulator-name = "VDDAO3V3"; |
| 72 | regulator-min-microvolt = <3300000>; |
| 73 | regulator-max-microvolt = <3300000>; |
| 74 | vin-supply = <&main_12v>; |
| 75 | regulator-boot-on; |
| 76 | regulator-always-on; |
| 77 | }; |
| 78 | |
| 79 | vddao_1v8: regulator-vddao-1v8 { |
| 80 | compatible = "regulator-fixed"; |
| 81 | regulator-name = "VDDAO1V8"; |
| 82 | regulator-min-microvolt = <1800000>; |
| 83 | regulator-max-microvolt = <1800000>; |
| 84 | vin-supply = <&vddao_3v3>; |
| 85 | regulator-boot-on; |
| 86 | regulator-always-on; |
| 87 | }; |
| 88 | |
| 89 | ddr4_2v5: regulator-ddr4-2v5 { |
| 90 | compatible = "regulator-fixed"; |
| 91 | regulator-name = "DDR4_2V5"; |
| 92 | regulator-min-microvolt = <2500000>; |
| 93 | regulator-max-microvolt = <2500000>; |
| 94 | vin-supply = <&vddao_3v3>; |
| 95 | regulator-boot-on; |
| 96 | regulator-always-on; |
| 97 | }; |
| 98 | |
| 99 | vcc_3v3: regulator-vcc-3v3 { |
| 100 | compatible = "regulator-fixed"; |
| 101 | regulator-name = "VCC3V3"; |
| 102 | regulator-min-microvolt = <3300000>; |
| 103 | regulator-max-microvolt = <3300000>; |
| 104 | vin-supply = <&vddao_3v3>; |
| 105 | regulator-boot-on; |
| 106 | regulator-always-on; |
| 107 | }; |
| 108 | |
| 109 | vcc_1v8: regulator-vcc-1v8 { |
| 110 | compatible = "regulator-fixed"; |
| 111 | regulator-name = "VCC1V8"; |
| 112 | regulator-min-microvolt = <1800000>; |
| 113 | regulator-max-microvolt = <1800000>; |
| 114 | vin-supply = <&vcc_3v3>; |
| 115 | regulator-boot-on; |
| 116 | regulator-always-on; |
| 117 | }; |
| 118 | |
| 119 | vdd_1v8: regulator-vdd-1v8 { |
| 120 | compatible = "regulator-fixed"; |
| 121 | regulator-name = "VDD1V8_BOOT"; |
| 122 | regulator-min-microvolt = <1800000>; |
| 123 | regulator-max-microvolt = <1800000>; |
| 124 | vin-supply = <&vcc_3v3>; |
| 125 | regulator-boot-on; |
| 126 | regulator-always-on; |
| 127 | }; |
| 128 | |
| 129 | vddio_b: regulator-vddio-3v3-b { |
| 130 | compatible = "regulator-fixed"; |
| 131 | regulator-name = "VDDIO_B"; |
| 132 | regulator-min-microvolt = <3300000>; |
| 133 | regulator-max-microvolt = <3300000>; |
| 134 | vin-supply = <&vcc_3v3>; |
| 135 | regulator-boot-on; |
| 136 | regulator-always-on; |
| 137 | }; |
| 138 | |
| 139 | sdcard: regulator-sdcard { |
| 140 | compatible = "regulator-fixed"; |
| 141 | regulator-name = "SDCARD_POWER"; |
| 142 | regulator-min-microvolt = <3300000>; |
| 143 | regulator-max-microvolt = <3300000>; |
| 144 | vin-supply = <&vddao_3v3>; |
| 145 | gpio = <&gpio GPIOA_4 GPIO_ACTIVE_LOW>; |
| 146 | regulator-boot-on; |
| 147 | regulator-always-on; |
| 148 | }; |
| 149 | }; |
| 150 | |
| 151 | &uart_b { |
| 152 | status = "okay"; |
| 153 | }; |
| 154 | |
| 155 | &nand { |
| 156 | status = "okay"; |
| 157 | #address-cells = <1>; |
| 158 | #size-cells = <0>; |
| 159 | |
| 160 | pinctrl-0 = <&nand_pins>; |
| 161 | pinctrl-names = "default"; |
| 162 | |
| 163 | nand@0 { |
| 164 | reg = <0>; |
| 165 | #address-cells = <1>; |
| 166 | #size-cells = <1>; |
| 167 | nand-on-flash-bbt; |
| 168 | |
| 169 | partition@0 { |
| 170 | label = "boot"; |
| 171 | reg = <0x0 0x00200000>; |
| 172 | }; |
| 173 | partition@200000 { |
| 174 | label = "env"; |
| 175 | reg = <0x00200000 0x00400000>; |
| 176 | }; |
| 177 | partition@600000 { |
| 178 | label = "system"; |
| 179 | reg = <0x00600000 0x00a00000>; |
| 180 | }; |
| 181 | partition@1000000 { |
| 182 | label = "rootfs"; |
| 183 | reg = <0x01000000 0x03000000>; |
| 184 | }; |
| 185 | partition@4000000 { |
| 186 | label = "media"; |
| 187 | reg = <0x04000000 0x8000000>; |
| 188 | }; |
| 189 | }; |
| 190 | }; |
| 191 | |
| 192 | ðmac { |
| 193 | status = "okay"; |
| 194 | phy-handle = <&internal_ephy>; |
| 195 | phy-mode = "rmii"; |
| 196 | }; |
| 197 | |
| 198 | &spifc { |
| 199 | #address-cells = <1>; |
| 200 | #size-cells = <0>; |
| 201 | |
| 202 | pinctrl-0 = <&spifc_pins>; |
| 203 | pinctrl-names = "default"; |
| 204 | |
| 205 | nand@0 { |
| 206 | compatible = "spi-nand"; |
| 207 | reg = <0>; |
| 208 | spi-max-frequency = <83000000>; |
| 209 | spi-tx-bus-width = <4>; |
| 210 | spi-rx-bus-width = <4>; |
| 211 | status = "disabled"; |
| 212 | |
| 213 | partitions { |
| 214 | compatible = "fixed-partitions"; |
| 215 | #address-cells = <1>; |
| 216 | #size-cells = <1>; |
| 217 | |
| 218 | partition@0 { |
| 219 | label = "boot"; |
| 220 | reg = <0 0x200000>; |
| 221 | }; |
| 222 | |
| 223 | partition@200000 { |
| 224 | label = "env"; |
| 225 | reg = <0x200000 0x400000>; |
| 226 | }; |
| 227 | |
| 228 | partition@600000 { |
| 229 | label = "system"; |
| 230 | reg = <0x600000 0xa00000>; |
| 231 | }; |
| 232 | |
| 233 | partition@1000000 { |
| 234 | label = "rootfs"; |
| 235 | reg = <0x1000000 0x3000000>; |
| 236 | }; |
| 237 | |
| 238 | partition@4000000 { |
| 239 | label = "data"; |
| 240 | reg = <0x4000000 0x8000000>; |
| 241 | }; |
| 242 | }; |
| 243 | }; |
| 244 | }; |
| 245 | |
| 246 | &sd { |
| 247 | status = "okay"; |
| 248 | pinctrl-0 = <&sdcard_pins>; |
| 249 | pinctrl-1 = <&sdcard_clk_gate_pins>; |
| 250 | pinctrl-names = "default","clk-gate"; |
| 251 | |
| 252 | bus-width = <4>; |
| 253 | cap-sd-highspeed; |
| 254 | max-frequency = <50000000>; |
| 255 | disable-wp; |
| 256 | |
| 257 | cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; |
| 258 | vmmc-supply = <&sdcard>; |
| 259 | vqmmc-supply = <&sdcard>; |
| 260 | }; |