blob: aa83073c96a737bc78a4d0d6d5ca54503229e188 [file] [log] [blame]
Max Filippov88574052016-08-07 08:53:00 +03001#
2# System reset devices
3#
4
5menu "System reset device drivers"
6
7config SYSRESET
8 bool "Enable support for system reset drivers"
9 depends on DM
10 help
11 Enable system reset drivers which can be used to reset the CPU or
12 board. Each driver can provide a reset method which will be called
13 to effect a reset. The uclass will try all available drivers when
14 reset_walk() is called.
15
Kever Yang525ea472019-04-02 20:41:25 +080016config SPL_SYSRESET
17 bool "Enable support for system reset drivers in SPL mode"
18 depends on SYSRESET && SPL_DM
19 help
20 Enable system reset drivers which can be used to reset the CPU or
21 board. Each driver can provide a reset method which will be called
22 to effect a reset. The uclass will try all available drivers when
23 reset_walk() is called.
24
25config TPL_SYSRESET
26 bool "Enable support for system reset drivers in TPL mode"
27 depends on SYSRESET && TPL_DM
28 help
29 Enable system reset drivers which can be used to reset the CPU or
30 board. Each driver can provide a reset method which will be called
31 to effect a reset. The uclass will try all available drivers when
32 reset_walk() is called.
33
Simon Glasse7ca7da2022-04-30 00:56:53 -060034config VPL_SYSRESET
35 bool "Enable support for system reset drivers in VPL mode"
36 depends on SYSRESET && VPL_DM
37 default y if TPL_SYSRESET
38 help
39 Enable system reset drivers which can be used to reset the CPU or
40 board. Each driver can provide a reset method which will be called
41 to effect a reset. The uclass will try all available drivers when
42 reset_walk() is called.
43
Masahiro Yamada836c55d2017-04-14 11:10:24 +090044if SYSRESET
45
Bin Menga0aba782021-02-25 17:22:52 +080046config SYSRESET_CMD_RESET
47 bool "sysreset implementation of the reset command"
48 default y
49 help
50 Enable sysreset implementation of the reset command.
51
Urja Rannikkoe008ebf2019-05-16 21:48:42 +000052if CMD_POWEROFF
53
54config SYSRESET_CMD_POWEROFF
55 bool "sysreset implementation of the poweroff command"
56 help
57 This should be selected by the appropriate PMIC driver if
58 the poweroff command is enabled.
59
60endif
61
Kongyang Liu3632ad52024-04-16 15:52:38 +080062config SYSRESET_CV1800B
63 bool "Enable support for Sophgo cv1800b System Reset"
64 help
65 Enable system reset support for Sophgo cv1800b SoC.
66
Sebastian Reichel6b30ac32020-09-02 19:31:42 +020067config POWEROFF_GPIO
68 bool "Enable support for GPIO poweroff driver"
Michal Simekac5adc12023-07-04 14:05:13 +020069 depends on DM_GPIO
Sebastian Reichel6b30ac32020-09-02 19:31:42 +020070 help
71 Support for system poweroff using a GPIO pin. This can be used
72 for systems having a single GPIO to trigger a system poweroff.
73
Svyatoslav Ryhelfe4445d2025-03-29 13:02:03 +020074config SPL_POWEROFF_GPIO
75 bool "Enable support for GPIO poweroff driver in SPL"
76 depends on DM_GPIO && SPL
77 help
78 Support for system poweroff using a GPIO pin in SPL. This can be used
79 for systems having a single GPIO to trigger a system poweroff.
80
81config TPL_POWEROFF_GPIO
82 bool "Enable support for GPIO poweroff driver in TPL"
83 depends on DM_GPIO && TPL
84 help
85 Support for system poweroff using a GPIO pin in TPL. This can be used
86 for systems having a single GPIO to trigger a system poweroff.
87
88config VPL_POWEROFF_GPIO
89 bool "Enable support for GPIO poweroff driver in VPL"
90 depends on DM_GPIO && VPL
91 help
92 Support for system poweroff using a GPIO pin in VPL. This can be used
93 for systems having a single GPIO to trigger a system poweroff.
94
Michal Simek8a196af2018-07-13 11:04:56 +020095config SYSRESET_GPIO
96 bool "Enable support for GPIO reset driver"
Michal Simekac5adc12023-07-04 14:05:13 +020097 depends on DM_GPIO
Michal Simek8a196af2018-07-13 11:04:56 +020098 help
99 Reset support via GPIO pin connected reset logic. This is used for
100 example on Microblaze where reset logic can be controlled via GPIO
101 pin which triggers cpu reset.
102
Svyatoslav Ryhelfe4445d2025-03-29 13:02:03 +0200103config SPL_SYSRESET_GPIO
104 bool "Enable support for GPIO reset driver in SPL"
105 depends on DM_GPIO && SPL
106 help
107 Reset support via GPIO pin connected reset logic in SPL. This is used
108 for example on Microblaze where reset logic can be controlled via
109 GPIO pin which triggers cpu reset.
110
111config TPL_SYSRESET_GPIO
112 bool "Enable support for GPIO reset driver in TPL"
113 depends on DM_GPIO && TPL
114 help
115 Reset support via GPIO pin connected reset logic in TPL. This is used
116 for example on Microblaze where reset logic can be controlled via
117 GPIO pin which triggers cpu reset.
118
119config VPL_SYSRESET_GPIO
120 bool "Enable support for GPIO reset driver in VPL"
121 depends on DM_GPIO && VPL
122 help
123 Reset support via GPIO pin connected reset logic in VPL. This is used
124 for example on Microblaze where reset logic can be controlled via
125 GPIO pin which triggers cpu reset.
126
Svyatoslav Ryhel52914ea2023-10-24 10:49:05 +0300127config SYSRESET_MAX77663
128 bool "Enable support for MAX77663 PMIC System Reset"
129 depends on DM_PMIC_MAX77663
130 select SYSRESET_CMD_POWEROFF if CMD_POWEROFF
131 help
132 Enable system power management functions found in MAX77663 PMIC.
133
Svyatoslav Ryhel9f8ea822024-10-06 16:51:21 +0300134config SYSRESET_MAX8907
135 bool "Enable support for MAX8907 PMIC System Reset"
136 depends on DM_PMIC_MAX8907
137 select SYSRESET_CMD_POWEROFF if CMD_POWEROFF
138 help
139 Enable system power management functions found in MAX8907 PMIC.
140
Michal Simekd1c6d422018-07-13 17:00:13 +0200141config SYSRESET_MICROBLAZE
142 bool "Enable support for Microblaze soft reset"
143 depends on MICROBLAZE
144 help
145 This is soft reset on Microblaze which does jump to 0x0 address.
146
Stefan Roese4df2d0d2020-06-30 12:08:55 +0200147config SYSRESET_OCTEON
148 bool "Enable support for Marvell Octeon SoC family"
149 depends on ARCH_OCTEON
150 help
151 This enables the system reset driver support for Marvell Octeon
152 SoCs.
153
Sergiu Moga65c723f2022-04-01 12:27:24 +0300154config SYSRESET_AT91
155 bool "Enable support for Microchip/Atmel reset driver"
156 depends on ARCH_AT91
157 select SYSRESET_SPL_AT91 if SPL && SPL_SYSRESET
158 help
159 This enables the system reset driver support for Microchip/Atmel
160 SoCs.
161
162config SYSRESET_SPL_AT91
163 bool "Enable support for Microchip/Atmel reset driver in SPL"
164 depends on ARCH_AT91
165 help
166 This enables the system reset driver support for Microchip/Atmel
167 SoCs in SPL.
168
Svyatoslav Ryheleacea672023-10-24 10:49:08 +0300169config SYSRESET_PALMAS
170 bool "Enable support for PALMAS System Reset"
171 depends on PMIC_PALMAS
172 select SYSRESET_CMD_POWEROFF if CMD_POWEROFF
173 help
174 Enable system power management functions found in PLAMAS PMIC family.
175
Masahiro Yamada836c55d2017-04-14 11:10:24 +0900176config SYSRESET_PSCI
177 bool "Enable support for PSCI System Reset"
178 depends on ARM_PSCI_FW
Simon Goldschmidte5f741a2019-07-16 21:29:32 +0200179 select SPL_ARM_PSCI_FW if SPL
Masahiro Yamada836c55d2017-04-14 11:10:24 +0900180 help
181 Enable PSCI SYSTEM_RESET function call. To use this, PSCI firmware
182 must be running on your system.
183
Heinrich Schuchardtcc382ff2021-09-12 21:11:46 +0200184config SYSRESET_SBI
185 bool "Enable support for SBI System Reset"
186 depends on RISCV_SMODE && SBI_V02
Heinrich Schuchardtf7187072022-09-05 16:40:49 +0200187 default y
Heinrich Schuchardtcc382ff2021-09-12 21:11:46 +0200188 select SYSRESET_CMD_POWEROFF if CMD_POWEROFF
189 help
190 Enable system reset and poweroff via the SBI system reset extension.
191 The extension was introduced in version 0.3 of the SBI specification.
192
193 If the SBI implementation provides the extension, is board specific.
194 The RISC-V platform specification mandates the extension for rich
195 operating system platforms.
196
Simon Goldschmidtbe366392019-07-15 21:47:53 +0200197config SYSRESET_SOCFPGA
198 bool "Enable support for Intel SOCFPGA family"
199 depends on ARCH_SOCFPGA && (TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10)
200 help
201 This enables the system reset driver support for Intel SOCFPGA SoCs
202 (Cyclone 5, Arria 5 and Arria 10).
203
Chee Hong Ang673e98e2020-08-05 20:11:25 +0800204config SYSRESET_SOCFPGA_SOC64
205 bool "Enable support for Intel SOCFPGA SoC64 family (Stratix10/Agilex)"
Siew Chin Lim8a714162021-03-01 20:04:10 +0800206 depends on ARCH_SOCFPGA && TARGET_SOCFPGA_SOC64
Simon Goldschmidtebfb9fb2019-07-15 21:47:54 +0200207 help
208 This enables the system reset driver support for Intel SOCFPGA
Chee Hong Ang673e98e2020-08-05 20:11:25 +0800209 SoC64 SoCs.
Simon Goldschmidtebfb9fb2019-07-15 21:47:54 +0200210
Svyatoslav Ryhelde66d062023-10-24 10:49:03 +0300211config SYSRESET_TEGRA
212 bool "Tegra PMC system reset driver"
213 depends on ARCH_TEGRA
214 help
215 This enables the system reset ability of PMC used in Tegra SoCs.
216
Andreas Dannenbergebc68792018-08-27 15:57:46 +0530217config SYSRESET_TI_SCI
218 bool "TI System Control Interface (TI SCI) system reset driver"
219 depends on TI_SCI_PROTOCOL
220 help
221 This enables the system reset driver support over TI System Control
222 Interface available on some new TI's SoCs.
223
Svyatoslav Ryhelab97ca22023-10-24 10:49:07 +0300224config SYSRESET_TPS65910
225 bool "Enable support for TPS65910/TPS65911 PMIC System Reset"
226 depends on DM_PMIC_TPS65910
227 select SYSRESET_CMD_POWEROFF if CMD_POWEROFF
228 help
229 Enable system power management functions found in TPS65910/TPS65911
230 PMICs.
231
Svyatoslav Ryhelb72803f2023-10-24 10:49:06 +0300232config SYSRESET_TPS80031
233 bool "Enable support for TPS80031/TPS80032 PMIC System Reset"
234 depends on DM_PMIC_TPS80031
235 select SYSRESET_CMD_POWEROFF if CMD_POWEROFF
236 help
237 Enable system power management functions found in TPS80031/TPS80032
238 PMICs.
239
Álvaro Fernández Rojasaa19aaf2017-04-25 00:39:14 +0200240config SYSRESET_SYSCON
241 bool "Enable support for mfd syscon reboot driver"
242 select REGMAP
243 select SYSCON
244 help
245 Reboot support for generic SYSCON mapped register reset.
246
Álvaro Fernández Rojas0da081e2017-05-16 18:29:13 +0200247config SYSRESET_WATCHDOG
248 bool "Enable support for watchdog reboot driver"
249 select WDT
250 help
251 Reboot support for generic watchdog reset.
252
Samuel Holland3a8713a2021-11-03 22:55:14 -0500253config SYSRESET_WATCHDOG_AUTO
254 bool "Automatically register first watchdog with sysreset"
255 depends on SYSRESET_WATCHDOG
256 help
257 If enabled, the first watchdog (as selected by the watchdog uclass)
258 will automatically be registered with the watchdog reboot driver.
259
developer1aa30892020-04-21 09:28:29 +0200260config SYSRESET_RESETCTL
261 bool "Enable support for reset controller reboot driver"
262 select DM_RESET
263 help
264 Reboot support using generic reset controller.
265
Bin Mengd18cdd42018-07-03 02:48:40 -0700266config SYSRESET_X86
267 bool "Enable support for x86 processor reboot driver"
268 depends on X86
269 help
270 Reboot support for generic x86 processor reset.
271
Simon Glassd22c1352019-09-25 08:11:24 -0600272config SYSRESET_SPL_X86
273 bool "Enable support for x86 processor reboot driver in SPL"
274 depends on X86
275 help
276 Reboot support for generic x86 processor reset in SPL.
277
278config SYSRESET_TPL_X86
279 bool "Enable support for x86 processor reboot driver in TPL"
280 depends on X86
281 help
282 Reboot support for generic x86 processor reset in TPL.
283
Rasmus Villemoesb007e2e2019-12-13 15:47:58 +0000284config SYSRESET_MPC83XX
Mario Six82ef4ba2018-08-06 10:23:35 +0200285 bool "Enable support MPC83xx SoC family reboot driver"
286 help
287 Reboot support for NXP MPC83xx SoCs.
288
Paul Barkerbdc193d2024-02-27 20:40:33 +0000289config SYSRESET_RAA215300
290 bool "Support sysreset via Renesas RAA215300 PMIC"
291 depends on PMIC_RAA215300
292 help
293 Add support for the system reboot via the Renesas RAA215300 PMIC.
294
Robert Marko4d58a7b2024-05-14 12:15:02 +0200295config SYSRESET_QCOM_PSHOLD
296 bool "Support sysreset for Qualcomm SoCs via PSHOLD"
Robert Marko4d58a7b2024-05-14 12:15:02 +0200297 help
298 Add support for the system reboot on Qualcomm SoCs via PSHOLD.
299
Samuel Hollandd9263d52021-11-03 22:55:11 -0500300endif
301
Max Filippov88574052016-08-07 08:53:00 +0300302endmenu