Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 1 | // SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) |
| 2 | /* |
| 3 | * Copyright (c) 2022 TQ-Systems GmbH <linux@ew.tq-group.com>, |
| 4 | * D-82229 Seefeld, Germany. |
| 5 | * Author: Markus Niebel |
| 6 | */ |
| 7 | |
| 8 | #include "imx93.dtsi" |
| 9 | |
| 10 | /{ |
| 11 | model = "TQ-Systems i.MX93 TQMa93xxLA/TQMa93xxCA SOM"; |
| 12 | compatible = "tq,imx93-tqma9352", "fsl,imx93"; |
| 13 | |
| 14 | reserved-memory { |
| 15 | #address-cells = <2>; |
| 16 | #size-cells = <2>; |
| 17 | ranges; |
| 18 | |
| 19 | linux,cma { |
| 20 | compatible = "shared-dma-pool"; |
| 21 | reusable; |
| 22 | alloc-ranges = <0 0x60000000 0 0x40000000>; |
| 23 | size = <0 0x10000000>; |
| 24 | linux,cma-default; |
| 25 | }; |
| 26 | }; |
| 27 | |
| 28 | reg_v1v8: regulator-v1v8 { |
| 29 | compatible = "regulator-fixed"; |
| 30 | regulator-name = "V_1V8"; |
| 31 | regulator-min-microvolt = <1800000>; |
| 32 | regulator-max-microvolt = <1800000>; |
| 33 | }; |
| 34 | |
| 35 | reg_v3v3: regulator-v3v3 { |
| 36 | compatible = "regulator-fixed"; |
| 37 | regulator-name = "V_3V3"; |
| 38 | regulator-min-microvolt = <3300000>; |
| 39 | regulator-max-microvolt = <3300000>; |
| 40 | }; |
| 41 | |
| 42 | /* SD2 RST# via PMIC SW_EN */ |
| 43 | reg_usdhc2_vmmc: regulator-usdhc2 { |
| 44 | compatible = "regulator-fixed"; |
| 45 | pinctrl-names = "default"; |
| 46 | pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; |
| 47 | regulator-name = "VSD_3V3"; |
| 48 | regulator-min-microvolt = <3300000>; |
| 49 | regulator-max-microvolt = <3300000>; |
| 50 | vin-supply = <®_v3v3>; |
| 51 | gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>; |
| 52 | enable-active-high; |
| 53 | }; |
| 54 | }; |
| 55 | |
| 56 | &adc1 { |
| 57 | vref-supply = <®_v1v8>; |
| 58 | }; |
| 59 | |
| 60 | &flexspi1 { |
| 61 | pinctrl-names = "default"; |
| 62 | pinctrl-0 = <&pinctrl_flexspi1>; |
| 63 | status = "okay"; |
| 64 | |
| 65 | flash0: flash@0 { |
| 66 | compatible = "jedec,spi-nor"; |
| 67 | reg = <0>; |
| 68 | /* |
| 69 | * no DQS, RXCLKSRC internal loop back, max 66 MHz |
| 70 | * clk framework uses CLK_DIVIDER_ROUND_CLOSEST |
| 71 | * selected value together with root from |
| 72 | * IMX93_CLK_SYS_PLL_PFD1 @ 800.000.000 Hz helps to |
| 73 | * respect the maximum value. |
| 74 | */ |
| 75 | spi-max-frequency = <62000000>; |
| 76 | spi-tx-bus-width = <4>; |
| 77 | spi-rx-bus-width = <4>; |
| 78 | }; |
| 79 | }; |
| 80 | |
| 81 | &gpio1 { |
| 82 | pmic-irq-hog { |
| 83 | gpio-hog; |
| 84 | gpios = <3 GPIO_ACTIVE_LOW>; |
| 85 | input; |
| 86 | line-name = "PMIC_IRQ#"; |
| 87 | }; |
| 88 | }; |
| 89 | |
| 90 | &lpi2c1 { |
| 91 | clock-frequency = <400000>; |
| 92 | pinctrl-names = "default", "sleep"; |
| 93 | pinctrl-0 = <&pinctrl_lpi2c1>; |
| 94 | pinctrl-1 = <&pinctrl_lpi2c1>; |
| 95 | status = "okay"; |
| 96 | |
| 97 | se97_som: temperature-sensor@1b { |
| 98 | compatible = "nxp,se97b", "jedec,jc-42.4-temp"; |
| 99 | reg = <0x1b>; |
| 100 | }; |
| 101 | |
| 102 | pcf85063: rtc@51 { |
| 103 | compatible = "nxp,pcf85063a"; |
| 104 | reg = <0x51>; |
| 105 | quartz-load-femtofarads = <7000>; |
| 106 | }; |
| 107 | |
| 108 | eeprom0: eeprom@53 { |
| 109 | compatible = "nxp,se97b", "atmel,24c02"; |
| 110 | reg = <0x53>; |
| 111 | pagesize = <16>; |
| 112 | read-only; |
| 113 | vcc-supply = <®_v3v3>; |
| 114 | }; |
| 115 | |
| 116 | eeprom1: eeprom@57 { |
| 117 | compatible = "atmel,24c64"; |
| 118 | reg = <0x57>; |
| 119 | pagesize = <32>; |
| 120 | vcc-supply = <®_v3v3>; |
| 121 | }; |
| 122 | |
| 123 | /* protectable identification memory (part of M24C64-D @57) */ |
| 124 | eeprom@5f { |
Tom Rini | 6bb92fc | 2024-05-20 09:54:58 -0600 | [diff] [blame] | 125 | compatible = "atmel,24c64d-wl"; |
Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 126 | reg = <0x5f>; |
Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 127 | vcc-supply = <®_v3v3>; |
| 128 | }; |
| 129 | |
| 130 | imu@6a { |
| 131 | compatible = "st,ism330dhcx"; |
| 132 | reg = <0x6a>; |
| 133 | vdd-supply = <®_v3v3>; |
| 134 | vddio-supply = <®_v3v3>; |
| 135 | }; |
| 136 | }; |
| 137 | |
| 138 | &usdhc1 { |
| 139 | pinctrl-names = "default", "state_100mhz", "state_200mhz"; |
| 140 | pinctrl-0 = <&pinctrl_usdhc1>; |
| 141 | pinctrl-1 = <&pinctrl_usdhc1>; |
| 142 | pinctrl-2 = <&pinctrl_usdhc1>; |
| 143 | bus-width = <8>; |
| 144 | non-removable; |
| 145 | no-sdio; |
| 146 | no-sd; |
| 147 | status = "okay"; |
| 148 | }; |
| 149 | |
| 150 | &wdog3 { |
| 151 | pinctrl-names = "default"; |
| 152 | pinctrl-0 = <&pinctrl_wdog>; |
| 153 | status = "okay"; |
| 154 | }; |
| 155 | |
| 156 | &iomuxc { |
| 157 | pinctrl_flexspi1: flexspi1grp { |
| 158 | fsl,pins = < |
| 159 | MX93_PAD_SD3_CMD__FLEXSPI1_A_SS0_B 0x3fe |
| 160 | MX93_PAD_SD3_CLK__FLEXSPI1_A_SCLK 0x3fe |
| 161 | MX93_PAD_SD3_DATA0__FLEXSPI1_A_DATA00 0x3fe |
| 162 | MX93_PAD_SD3_DATA1__FLEXSPI1_A_DATA01 0x3fe |
| 163 | MX93_PAD_SD3_DATA2__FLEXSPI1_A_DATA02 0x3fe |
| 164 | MX93_PAD_SD3_DATA3__FLEXSPI1_A_DATA03 0x3fe |
| 165 | >; |
| 166 | }; |
| 167 | |
| 168 | pinctrl_lpi2c1: lpi2c1grp { |
| 169 | fsl,pins = < |
| 170 | MX93_PAD_I2C1_SCL__LPI2C1_SCL 0x40000b9e |
| 171 | MX93_PAD_I2C1_SDA__LPI2C1_SDA 0x40000b9e |
| 172 | >; |
| 173 | }; |
| 174 | |
| 175 | pinctrl_pca9451: pca9451grp { |
| 176 | fsl,pins = < |
| 177 | MX93_PAD_I2C2_SDA__GPIO1_IO03 0x1306 |
| 178 | >; |
| 179 | }; |
| 180 | |
| 181 | pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { |
| 182 | fsl,pins = < |
| 183 | MX93_PAD_SD2_RESET_B__GPIO3_IO07 0x1306 |
| 184 | >; |
| 185 | }; |
| 186 | |
| 187 | pinctrl_usdhc1: usdhc1grp { |
| 188 | fsl,pins = < |
| 189 | /* HYS | PU | PD | FSEL_3 | X5 */ |
| 190 | MX93_PAD_SD1_CLK__USDHC1_CLK 0x17be |
| 191 | MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x17be |
| 192 | /* HYS | PU | FSEL_3 | X5 */ |
| 193 | MX93_PAD_SD1_CMD__USDHC1_CMD 0x13be |
| 194 | /* HYS | PU | FSEL_3 | X4 */ |
| 195 | MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x139e |
| 196 | MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x139e |
| 197 | MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x139e |
| 198 | MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x139e |
| 199 | MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x139e |
| 200 | MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x139e |
| 201 | MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x139e |
| 202 | MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x139e |
| 203 | >; |
| 204 | }; |
| 205 | |
| 206 | pinctrl_wdog: wdoggrp { |
| 207 | fsl,pins = < |
| 208 | MX93_PAD_WDOG_ANY__WDOG1_WDOG_ANY 0x31e |
| 209 | >; |
| 210 | }; |
| 211 | }; |