blob: c4c5e0528631d14e5fd4e3074c9376be3b6e1480 [file] [log] [blame]
Christophe Ricard5ffadc32016-01-21 23:27:14 +01001/*
2 * STMicroelectronics TPM ST33ZP24 SPI UBOOT driver
3 *
Patrice Chotard27e90942017-10-23 09:54:01 +02004 * Copyright (C) 2016, STMicroelectronics - All Rights Reserved
5 * Author(s): Christophe Ricard <christophe-h.ricard@st.com> for STMicroelectronics.
Christophe Ricard5ffadc32016-01-21 23:27:14 +01006 *
7 * Description: Device driver for ST33ZP24 SPI TPM TCG.
8 *
9 * This device driver implements the TPM interface as defined in
10 * the TCG TPM Interface Spec version 1.21, revision 1.0 and the
11 * STMicroelectronics Protocol Stack Specification version 1.2.0.
12 *
13 * SPDX-License-Identifier: GPL-2.0+
14 */
15
16#include <common.h>
17#include <dm.h>
18#include <fdtdec.h>
19#include <spi.h>
20#include <tpm.h>
21#include <errno.h>
22#include <linux/types.h>
23#include <asm/unaligned.h>
24#include <linux/compat.h>
25
26#include "tpm_tis.h"
27#include "tpm_internal.h"
28
29#define TPM_ACCESS 0x0
30#define TPM_STS 0x18
31#define TPM_DATA_FIFO 0x24
32
33#define LOCALITY0 0
34
35#define TPM_DATA_FIFO 0x24
36#define TPM_INTF_CAPABILITY 0x14
37
38#define TPM_DUMMY_BYTE 0x00
39#define TPM_WRITE_DIRECTION 0x80
40
41#define MAX_SPI_LATENCY 15
42#define LOCALITY0 0
43
44#define ST33ZP24_OK 0x5A
45#define ST33ZP24_UNDEFINED_ERR 0x80
46#define ST33ZP24_BADLOCALITY 0x81
47#define ST33ZP24_TISREGISTER_UKNOWN 0x82
48#define ST33ZP24_LOCALITY_NOT_ACTIVATED 0x83
49#define ST33ZP24_HASH_END_BEFORE_HASH_START 0x84
50#define ST33ZP24_BAD_COMMAND_ORDER 0x85
51#define ST33ZP24_INCORECT_RECEIVED_LENGTH 0x86
52#define ST33ZP24_TPM_FIFO_OVERFLOW 0x89
53#define ST33ZP24_UNEXPECTED_READ_FIFO 0x8A
54#define ST33ZP24_UNEXPECTED_WRITE_FIFO 0x8B
55#define ST33ZP24_CMDRDY_SET_WHEN_PROCESSING_HASH_END 0x90
56#define ST33ZP24_DUMMY_BYTES 0x00
57
58/*
59 * TPM command can be up to 2048 byte, A TPM response can be up to
60 * 1024 byte.
61 * Between command and response, there are latency byte (up to 15
62 * usually on st33zp24 2 are enough).
63 *
64 * Overall when sending a command and expecting an answer we need if
65 * worst case:
66 * 2048 (for the TPM command) + 1024 (for the TPM answer). We need
67 * some latency byte before the answer is available (max 15).
68 * We have 2048 + 1024 + 15.
69 */
70#define ST33ZP24_SPI_BUFFER_SIZE (TPM_BUFSIZE + (TPM_BUFSIZE / 2) +\
71 MAX_SPI_LATENCY)
72
73struct st33zp24_spi_phy {
74 int latency;
75
76 u8 tx_buf[ST33ZP24_SPI_BUFFER_SIZE];
77 u8 rx_buf[ST33ZP24_SPI_BUFFER_SIZE];
78};
79
80static int st33zp24_spi_status_to_errno(u8 code)
81{
82 switch (code) {
83 case ST33ZP24_OK:
84 return 0;
85 case ST33ZP24_UNDEFINED_ERR:
86 case ST33ZP24_BADLOCALITY:
87 case ST33ZP24_TISREGISTER_UKNOWN:
88 case ST33ZP24_LOCALITY_NOT_ACTIVATED:
89 case ST33ZP24_HASH_END_BEFORE_HASH_START:
90 case ST33ZP24_BAD_COMMAND_ORDER:
91 case ST33ZP24_UNEXPECTED_READ_FIFO:
92 case ST33ZP24_UNEXPECTED_WRITE_FIFO:
93 case ST33ZP24_CMDRDY_SET_WHEN_PROCESSING_HASH_END:
94 return -EPROTO;
95 case ST33ZP24_INCORECT_RECEIVED_LENGTH:
96 case ST33ZP24_TPM_FIFO_OVERFLOW:
97 return -EMSGSIZE;
98 case ST33ZP24_DUMMY_BYTES:
99 return -ENOSYS;
100 }
101 return code;
102}
103
104/*
105 * st33zp24_spi_send
106 * Send byte to TPM register according to the ST33ZP24 SPI protocol.
107 * @param: tpm, the chip description
108 * @param: tpm_register, the tpm tis register where the data should be written
109 * @param: tpm_data, the tpm_data to write inside the tpm_register
110 * @param: tpm_size, The length of the data
111 * @return: should be zero if success else a negative error code.
112 */
113static int st33zp24_spi_write(struct udevice *dev, u8 tpm_register,
114 const u8 *tpm_data, size_t tpm_size)
115{
116 int total_length = 0, ret;
117 struct spi_slave *slave = dev_get_parent_priv(dev);
118 struct st33zp24_spi_phy *phy = dev_get_platdata(dev);
119
120 u8 *tx_buf = (u8 *)phy->tx_buf;
121 u8 *rx_buf = phy->rx_buf;
122
123 tx_buf[total_length++] = TPM_WRITE_DIRECTION | LOCALITY0;
124 tx_buf[total_length++] = tpm_register;
125
126 if (tpm_size > 0 && tpm_register == TPM_DATA_FIFO) {
127 tx_buf[total_length++] = tpm_size >> 8;
128 tx_buf[total_length++] = tpm_size;
129 }
130 memcpy(tx_buf + total_length, tpm_data, tpm_size);
131 total_length += tpm_size;
132
133 memset(tx_buf + total_length, TPM_DUMMY_BYTE, phy->latency);
134
135 total_length += phy->latency;
136
137 ret = spi_claim_bus(slave);
138 if (ret < 0)
139 return ret;
140
141 ret = spi_xfer(slave, total_length * 8, tx_buf, rx_buf,
142 SPI_XFER_BEGIN | SPI_XFER_END);
143 if (ret < 0)
144 return ret;
145
146 spi_release_bus(slave);
147
148 if (ret == 0)
149 ret = rx_buf[total_length - 1];
150
151 return st33zp24_spi_status_to_errno(ret);
152}
153
154/*
155 * spi_st33zp24_spi_read8_reg
156 * Recv byte from the TIS register according to the ST33ZP24 SPI protocol.
157 * @param: tpm, the chip description
158 * @param: tpm_loc, the locality to read register from
159 * @param: tpm_register, the tpm tis register where the data should be read
160 * @param: tpm_data, the TPM response
161 * @param: tpm_size, tpm TPM response size to read.
162 * @return: should be zero if success else a negative error code.
163 */
164static u8 st33zp24_spi_read8_reg(struct udevice *dev, u8 tpm_register,
165 u8 *tpm_data, size_t tpm_size)
166{
167 int total_length = 0, ret;
168 struct spi_slave *slave = dev_get_parent_priv(dev);
169 struct st33zp24_spi_phy *phy = dev_get_platdata(dev);
170
171 u8 *tx_buf = (u8 *)phy->tx_buf;
172 u8 *rx_buf = phy->rx_buf;
173
174 /* Pre-Header */
175 tx_buf[total_length++] = LOCALITY0;
176 tx_buf[total_length++] = tpm_register;
177
178 memset(&tx_buf[total_length], TPM_DUMMY_BYTE,
179 phy->latency + tpm_size);
180 total_length += phy->latency + tpm_size;
181
182 ret = spi_claim_bus(slave);
183 if (ret < 0)
184 return 0;
185
186 ret = spi_xfer(slave, total_length * 8, tx_buf, rx_buf,
187 SPI_XFER_BEGIN | SPI_XFER_END);
188 if (ret < 0)
189 return 0;
190
191 spi_release_bus(slave);
192
193 if (tpm_size > 0 && ret == 0) {
194 ret = rx_buf[total_length - tpm_size - 1];
195 memcpy(tpm_data, rx_buf + total_length - tpm_size, tpm_size);
196 }
197 return ret;
198}
199
200/*
201 * st33zp24_spi_recv
202 * Recv byte from the TIS register according to the ST33ZP24 SPI protocol.
203 * @param: phy_id, the phy description
204 * @param: tpm_register, the tpm tis register where the data should be read
205 * @param: tpm_data, the TPM response
206 * @param: tpm_size, tpm TPM response size to read.
207 * @return: number of byte read successfully: should be one if success.
208 */
209static int st33zp24_spi_read(struct udevice *dev, u8 tpm_register,
210 u8 *tpm_data, size_t tpm_size)
211{
212 int ret;
213
214 ret = st33zp24_spi_read8_reg(dev, tpm_register, tpm_data, tpm_size);
215 if (!st33zp24_spi_status_to_errno(ret))
216 return tpm_size;
217
218 return ret;
219}
220
221static int st33zp24_spi_evaluate_latency(struct udevice *dev)
222{
223 int latency = 1, status = 0;
224 u8 data = 0;
225 struct st33zp24_spi_phy *phy = dev_get_platdata(dev);
226
227 while (!status && latency < MAX_SPI_LATENCY) {
228 phy->latency = latency;
229 status = st33zp24_spi_read8_reg(dev, TPM_INTF_CAPABILITY,
230 &data, 1);
231 latency++;
232 }
233 if (status < 0)
234 return status;
235 if (latency == MAX_SPI_LATENCY)
236 return -ENODEV;
237
238 return latency - 1;
239}
240
241/*
242 * st33zp24_spi_release_locality release the active locality
243 * @param: chip, the tpm chip description.
244 */
245static void st33zp24_spi_release_locality(struct udevice *dev)
246{
247 u8 data = TPM_ACCESS_ACTIVE_LOCALITY;
248
249 st33zp24_spi_write(dev, TPM_ACCESS, &data, 1);
250}
251
252/*
253 * st33zp24_spi_check_locality if the locality is active
254 * @param: chip, the tpm chip description
255 * @return: the active locality or -EACCES.
256 */
257static int st33zp24_spi_check_locality(struct udevice *dev)
258{
259 u8 data;
260 u8 status;
261 struct tpm_chip *chip = dev_get_priv(dev);
262
263 status = st33zp24_spi_read(dev, TPM_ACCESS, &data, 1);
264 if (status && (data &
265 (TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID)) ==
266 (TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID))
267 return chip->locality;
268
269 return -EACCES;
270}
271
272/*
273 * st33zp24_spi_request_locality request the TPM locality
274 * @param: chip, the chip description
275 * @return: the active locality or negative value.
276 */
277static int st33zp24_spi_request_locality(struct udevice *dev)
278{
279 unsigned long start, stop;
280 long ret;
281 u8 data;
282 struct tpm_chip *chip = dev_get_priv(dev);
283
284 if (st33zp24_spi_check_locality(dev) == chip->locality)
285 return chip->locality;
286
287 data = TPM_ACCESS_REQUEST_USE;
288 ret = st33zp24_spi_write(dev, TPM_ACCESS, &data, 1);
289 if (ret < 0)
290 return ret;
291
292 /* wait for locality activated */
293 start = get_timer(0);
294 stop = chip->timeout_a;
295 do {
296 if (st33zp24_spi_check_locality(dev) >= 0)
297 return chip->locality;
298 udelay(TPM_TIMEOUT_MS * 1000);
299 } while (get_timer(start) < stop);
300
301 return -EACCES;
302}
303
304/*
305 * st33zp24_spi_status return the TPM_STS register
306 * @param: chip, the tpm chip description
307 * @return: the TPM_STS register value.
308 */
309static u8 st33zp24_spi_status(struct udevice *dev)
310{
311 u8 data;
312
313 st33zp24_spi_read(dev, TPM_STS, &data, 1);
314 return data;
315}
316
317/*
318 * st33zp24_spi_get_burstcount return the burstcount address 0x19 0x1A
319 * @param: chip, the chip description
320 * return: the burstcount or -TPM_DRIVER_ERR in case of error.
321 */
322static int st33zp24_spi_get_burstcount(struct udevice *dev)
323{
324 struct tpm_chip *chip = dev_get_priv(dev);
325 unsigned long start, stop;
326 int burstcnt, status;
327 u8 tpm_reg, temp;
328
329 /* wait for burstcount */
330 start = get_timer(0);
331 stop = chip->timeout_d;
332 do {
333 tpm_reg = TPM_STS + 1;
334 status = st33zp24_spi_read(dev, tpm_reg, &temp, 1);
335 if (status < 0)
336 return -EBUSY;
337
338 tpm_reg = TPM_STS + 2;
339 burstcnt = temp;
340 status = st33zp24_spi_read(dev, tpm_reg, &temp, 1);
341 if (status < 0)
342 return -EBUSY;
343
344 burstcnt |= temp << 8;
345 if (burstcnt)
346 return burstcnt;
347 udelay(TIS_SHORT_TIMEOUT_MS * 1000);
348 } while (get_timer(start) < stop);
349
350 return -EBUSY;
351}
352
353/*
354 * st33zp24_spi_cancel, cancel the current command execution or
355 * set STS to COMMAND READY.
356 * @param: chip, tpm_chip description.
357 */
358static void st33zp24_spi_cancel(struct udevice *dev)
359{
360 u8 data;
361
362 data = TPM_STS_COMMAND_READY;
363 st33zp24_spi_write(dev, TPM_STS, &data, 1);
364}
365
366/*
367 * st33zp24_spi_wait_for_stat wait for a TPM_STS value
368 * @param: chip, the tpm chip description
369 * @param: mask, the value mask to wait
370 * @param: timeout, the timeout
371 * @param: status,
372 * @return: the tpm status, 0 if success, -ETIME if timeout is reached.
373 */
374static int st33zp24_spi_wait_for_stat(struct udevice *dev, u8 mask,
375 unsigned long timeout, int *status)
376{
377 unsigned long start, stop;
378
379 /* Check current status */
380 *status = st33zp24_spi_status(dev);
381 if ((*status & mask) == mask)
382 return 0;
383
384 start = get_timer(0);
385 stop = timeout;
386 do {
387 udelay(TPM_TIMEOUT_MS * 1000);
388 *status = st33zp24_spi_status(dev);
389 if ((*status & mask) == mask)
390 return 0;
391 } while (get_timer(start) < stop);
392
393 return -ETIME;
394}
395
396/*
397 * st33zp24_spi_recv_data receive data
398 * @param: chip, the tpm chip description
399 * @param: buf, the buffer where the data are received
400 * @param: count, the number of data to receive
401 * @return: the number of bytes read from TPM FIFO.
402 */
403static int st33zp24_spi_recv_data(struct udevice *dev, u8 *buf, size_t count)
404{
405 struct tpm_chip *chip = dev_get_priv(dev);
406 int size = 0, burstcnt, len, ret, status;
407
408 while (size < count &&
409 st33zp24_spi_wait_for_stat(dev, TPM_STS_DATA_AVAIL | TPM_STS_VALID,
410 chip->timeout_c, &status) == 0) {
411 burstcnt = st33zp24_spi_get_burstcount(dev);
412 if (burstcnt < 0)
413 return burstcnt;
414 len = min_t(int, burstcnt, count - size);
415 ret = st33zp24_spi_read(dev, TPM_DATA_FIFO, buf + size, len);
416 if (ret < 0)
417 return ret;
418
419 size += len;
420 }
421 return size;
422}
423
424/*
425 * st33zp24_spi_recv received TPM response through TPM phy.
426 * @param: chip, tpm_chip description.
427 * @param: buf, the buffer to store data.
428 * @param: count, the number of bytes that can received (sizeof buf).
429 * @return: Returns zero in case of success else -EIO.
430 */
431static int st33zp24_spi_recv(struct udevice *dev, u8 *buf, size_t count)
432{
433 struct tpm_chip *chip = dev_get_priv(dev);
Jeremy Boone8c4b0622018-02-12 17:56:35 -0500434 int size;
435 unsigned int expected;
Christophe Ricard5ffadc32016-01-21 23:27:14 +0100436
437 if (!chip)
438 return -ENODEV;
439
440 if (count < TPM_HEADER_SIZE) {
441 size = -EIO;
442 goto out;
443 }
444
445 size = st33zp24_spi_recv_data(dev, buf, TPM_HEADER_SIZE);
446 if (size < TPM_HEADER_SIZE) {
447 debug("TPM error, unable to read header\n");
448 goto out;
449 }
450
451 expected = get_unaligned_be32(buf + 2);
Jeremy Boone8c4b0622018-02-12 17:56:35 -0500452 if (expected > count || expected < TPM_HEADER_SIZE) {
Christophe Ricard5ffadc32016-01-21 23:27:14 +0100453 size = -EIO;
454 goto out;
455 }
456
457 size += st33zp24_spi_recv_data(dev, &buf[TPM_HEADER_SIZE],
458 expected - TPM_HEADER_SIZE);
459 if (size < expected) {
460 debug("TPM error, unable to read remaining bytes of result\n");
461 size = -EIO;
462 goto out;
463 }
464
465out:
466 st33zp24_spi_cancel(dev);
467 st33zp24_spi_release_locality(dev);
468
469 return size;
470}
471
472/*
473 * st33zp24_spi_send send TPM commands through TPM phy.
474 * @param: chip, tpm_chip description.
475 * @param: buf, the buffer to send.
476 * @param: len, the number of bytes to send.
477 * @return: Returns zero in case of success else the negative error code.
478 */
479static int st33zp24_spi_send(struct udevice *dev, const u8 *buf, size_t len)
480{
481 struct tpm_chip *chip = dev_get_priv(dev);
482 u32 i, size;
483 int burstcnt, ret, status;
484 u8 data, tpm_stat;
485
486 if (!chip)
487 return -ENODEV;
488 if (len < TPM_HEADER_SIZE)
489 return -EIO;
490
491 ret = st33zp24_spi_request_locality(dev);
492 if (ret < 0)
493 return ret;
494
495 tpm_stat = st33zp24_spi_status(dev);
496 if ((tpm_stat & TPM_STS_COMMAND_READY) == 0) {
497 st33zp24_spi_cancel(dev);
498 if (st33zp24_spi_wait_for_stat(dev, TPM_STS_COMMAND_READY,
499 chip->timeout_b, &status) < 0) {
500 ret = -ETIME;
501 goto out_err;
502 }
503 }
504
505 for (i = 0; i < len - 1;) {
506 burstcnt = st33zp24_spi_get_burstcount(dev);
507 if (burstcnt < 0)
508 return burstcnt;
509
510 size = min_t(int, len - i - 1, burstcnt);
511 ret = st33zp24_spi_write(dev, TPM_DATA_FIFO, buf + i, size);
512 if (ret < 0)
513 goto out_err;
514
515 i += size;
516 }
517
518 tpm_stat = st33zp24_spi_status(dev);
519 if ((tpm_stat & TPM_STS_DATA_EXPECT) == 0) {
520 ret = -EIO;
521 goto out_err;
522 }
523
524 ret = st33zp24_spi_write(dev, TPM_DATA_FIFO, buf + len - 1, 1);
525 if (ret < 0)
526 goto out_err;
527
528 tpm_stat = st33zp24_spi_status(dev);
529 if ((tpm_stat & TPM_STS_DATA_EXPECT) != 0) {
530 ret = -EIO;
531 goto out_err;
532 }
533
534 data = TPM_STS_GO;
535 ret = st33zp24_spi_write(dev, TPM_STS, &data, 1);
536 if (ret < 0)
537 goto out_err;
538
539 return len;
540
541out_err:
542 st33zp24_spi_cancel(dev);
543 st33zp24_spi_release_locality(dev);
544
545 return ret;
546}
547
548static int st33zp24_spi_cleanup(struct udevice *dev)
549{
550 st33zp24_spi_cancel(dev);
551 /*
552 * The TPM needs some time to clean up here,
553 * so we sleep rather than keeping the bus busy
554 */
555 mdelay(2);
556 st33zp24_spi_release_locality(dev);
557
558 return 0;
559}
560
561static int st33zp24_spi_init(struct udevice *dev)
562{
563 struct tpm_chip *chip = dev_get_priv(dev);
564 struct st33zp24_spi_phy *phy = dev_get_platdata(dev);
565
566 chip->is_open = 1;
567
568 /* Default timeouts - these could move to the device tree */
569 chip->timeout_a = TIS_SHORT_TIMEOUT_MS;
570 chip->timeout_b = TIS_LONG_TIMEOUT_MS;
571 chip->timeout_c = TIS_SHORT_TIMEOUT_MS;
572 chip->timeout_d = TIS_SHORT_TIMEOUT_MS;
573
574 chip->locality = LOCALITY0;
575
576 phy->latency = st33zp24_spi_evaluate_latency(dev);
577 if (phy->latency <= 0)
578 return -ENODEV;
579
580 /*
581 * A timeout query to TPM can be placed here.
582 * Standard timeout values are used so far
583 */
584
585 return 0;
586}
587
588static int st33zp24_spi_open(struct udevice *dev)
589{
590 struct tpm_chip *chip = dev_get_priv(dev);
591 int rc;
592
593 debug("%s: start\n", __func__);
594 if (chip->is_open)
595 return -EBUSY;
596
597 rc = st33zp24_spi_init(dev);
598 if (rc < 0)
599 chip->is_open = 0;
600
601 return rc;
602}
603
604static int st33zp24_spi_close(struct udevice *dev)
605{
606 struct tpm_chip *chip = dev_get_priv(dev);
607
608 if (chip->is_open) {
609 st33zp24_spi_release_locality(dev);
610 chip->is_open = 0;
611 chip->vend_dev = 0;
612 }
613
614 return 0;
615}
616
617static int st33zp24_spi_get_desc(struct udevice *dev, char *buf, int size)
618{
619 struct tpm_chip *chip = dev_get_priv(dev);
620
621 if (size < 50)
622 return -ENOSPC;
623
624 return snprintf(buf, size, "1.2 TPM (%s, chip type %s device-id 0x%x)",
625 chip->is_open ? "open" : "closed",
626 dev->name,
627 chip->vend_dev >> 16);
628}
629
630const struct tpm_ops st33zp24_spi_tpm_ops = {
631 .open = st33zp24_spi_open,
632 .close = st33zp24_spi_close,
633 .recv = st33zp24_spi_recv,
634 .send = st33zp24_spi_send,
635 .cleanup = st33zp24_spi_cleanup,
636 .get_desc = st33zp24_spi_get_desc,
637};
638
639static int st33zp24_spi_probe(struct udevice *dev)
640{
641 struct tpm_chip_priv *uc_priv = dev_get_uclass_priv(dev);
642
643 uc_priv->duration_ms[TPM_SHORT] = TIS_SHORT_TIMEOUT_MS;
644 uc_priv->duration_ms[TPM_MEDIUM] = TIS_LONG_TIMEOUT_MS;
645 uc_priv->duration_ms[TPM_LONG] = TIS_LONG_TIMEOUT_MS;
646 uc_priv->retry_time_ms = TPM_TIMEOUT_MS;
647
648 debug("ST33ZP24 SPI TPM from STMicroelectronics found\n");
649
650 return 0;
651}
652
653static int st33zp24_spi_remove(struct udevice *dev)
654{
655 st33zp24_spi_release_locality(dev);
656
657 return 0;
658}
659
660static const struct udevice_id st33zp24_spi_ids[] = {
661 { .compatible = "st,st33zp24-spi" },
662 { }
663};
664
665U_BOOT_DRIVER(st33zp24_spi_spi) = {
666 .name = "st33zp24-spi",
667 .id = UCLASS_TPM,
668 .of_match = of_match_ptr(st33zp24_spi_ids),
669 .probe = st33zp24_spi_probe,
670 .remove = st33zp24_spi_remove,
671 .ops = &st33zp24_spi_tpm_ops,
672 .priv_auto_alloc_size = sizeof(struct tpm_chip),
673 .platdata_auto_alloc_size = sizeof(struct st33zp24_spi_phy),
674};