blob: 038f6398eb6c690dd165a358f03882ec79ac8907 [file] [log] [blame]
Tom Rini10e47792018-05-06 17:58:06 -04001/* SPDX-License-Identifier: GPL-2.0+ */
Marek Behún09e16b82017-06-09 19:28:45 +02002/*
3 * Copyright (C) 2017 Marek Behun <marek.behun@nic.cz>
4 * Copyright (C) 2016 Tomas Hlavacek <tomas.hlavacek@nic.cz>
Marek Behún09e16b82017-06-09 19:28:45 +02005 */
6
7#ifndef _CONFIG_TURRIS_OMNIA_H
8#define _CONFIG_TURRIS_OMNIA_H
9
10/*
11 * High Level Configuration Options (easy to change)
12 */
13
Marek Behún09e16b82017-06-09 19:28:45 +020014/*
15 * TEXT_BASE needs to be below 16MiB, since this area is scrubbed
16 * for DDR ECC byte filling in the SPL before loading the main
17 * U-Boot into it.
18 */
Marek Behún09e16b82017-06-09 19:28:45 +020019#define CONFIG_SYS_TCLK 250000000 /* 250MHz */
20
21/*
22 * Commands configuration
23 */
Marek Behún09e16b82017-06-09 19:28:45 +020024
25/* I2C support */
26#define CONFIG_DM_I2C
27#define CONFIG_I2C_MUX
28#define CONFIG_I2C_MUX_PCA954x
29#define CONFIG_SPL_I2C_MUX
30#define CONFIG_SYS_I2C_MVTWSI
31
32/* Watchdog support */
33#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_WDT_ORION)
34# define CONFIG_WATCHDOG
35#endif
36
37/* SPI NOR flash default params, used by sf commands */
Marek Behún09e16b82017-06-09 19:28:45 +020038#define CONFIG_SPI_FLASH_SPANSION
39
40/*
41 * SDIO/MMC Card Configuration
42 */
43#define CONFIG_SYS_MMC_BASE MVEBU_SDIO_BASE
44
45/*
46 * SATA/SCSI/AHCI configuration
47 */
Marek Behún09e16b82017-06-09 19:28:45 +020048#define CONFIG_SCSI_AHCI_PLAT
49#define CONFIG_SYS_SCSI_MAX_SCSI_ID 2
50#define CONFIG_SYS_SCSI_MAX_LUN 1
51#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
52 CONFIG_SYS_SCSI_MAX_LUN)
53
Marek Behún09e16b82017-06-09 19:28:45 +020054/* USB/EHCI configuration */
55#define CONFIG_EHCI_IS_TDI
56
57/* Environment in SPI NOR flash */
Marek Behún09e16b82017-06-09 19:28:45 +020058#define CONFIG_ENV_OFFSET (3*(1 << 18)) /* 768KiB in */
59#define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */
60#define CONFIG_ENV_SECT_SIZE (256 << 10) /* 256KiB sectors */
61
Marek Behún09e16b82017-06-09 19:28:45 +020062#define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */
63
64/* PCIe support */
65#ifndef CONFIG_SPL_BUILD
Marek Behún09e16b82017-06-09 19:28:45 +020066#define CONFIG_PCI_SCAN_SHOW
67#endif
68
Marek Behún09e16b82017-06-09 19:28:45 +020069/* Keep device tree and initrd in lower memory so the kernel can access them */
70#define RELOCATION_LIMITS_ENV_SETTINGS \
71 "fdt_high=0x10000000\0" \
72 "initrd_high=0x10000000\0"
73
74/* Defines for SPL */
Marek Behún09e16b82017-06-09 19:28:45 +020075#define CONFIG_SPL_SIZE (140 << 10)
76#define CONFIG_SPL_TEXT_BASE 0x40000030
77#define CONFIG_SPL_MAX_SIZE (CONFIG_SPL_SIZE - 0x0030)
78
79#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + CONFIG_SPL_SIZE)
80#define CONFIG_SPL_BSS_MAX_SIZE (16 << 10)
81
82#ifdef CONFIG_SPL_BUILD
83#define CONFIG_SYS_MALLOC_SIMPLE
84#endif
85
86#define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10))
87#define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4)
88#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
89
Baruch Siach8d196a42018-06-18 21:56:24 +030090#ifdef CONFIG_MVEBU_SPL_BOOT_DEVICE_SPI
Marek Behún09e16b82017-06-09 19:28:45 +020091/* SPL related SPI defines */
Marek Behún09e16b82017-06-09 19:28:45 +020092# define CONFIG_SYS_SPI_U_BOOT_OFFS 0x24000
93# define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS
94#endif
95
Baruch Siach8d196a42018-06-18 21:56:24 +030096#ifdef CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC
Marek Behún09e16b82017-06-09 19:28:45 +020097/* SPL related MMC defines */
98# define CONFIG_SYS_MMC_U_BOOT_OFFS (160 << 10)
99# define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_MMC_U_BOOT_OFFS
100# ifdef CONFIG_SPL_BUILD
101# define CONFIG_FIXED_SDHCI_ALIGNED_BUFFER 0x00180000 /* in SDRAM */
102# endif
103#endif
104
105/*
106 * mv-common.h should be defined after CMD configs since it used them
107 * to enable certain macros
108 */
109#include "mv-common.h"
110
111/* Include the common distro boot environment */
112#ifndef CONFIG_SPL_BUILD
Marek Behún09e16b82017-06-09 19:28:45 +0200113
114#ifdef CONFIG_MMC
115#define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0)
116#else
117#define BOOT_TARGET_DEVICES_MMC(func)
118#endif
119
120#ifdef CONFIG_USB_STORAGE
121#define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0)
122#else
123#define BOOT_TARGET_DEVICES_USB(func)
124#endif
125
126#define BOOT_TARGET_DEVICES(func) \
127 BOOT_TARGET_DEVICES_MMC(func) \
128 BOOT_TARGET_DEVICES_USB(func) \
129 func(PXE, pxe, na) \
130 func(DHCP, dhcp, na)
131
132#define KERNEL_ADDR_R __stringify(0x1000000)
133#define FDT_ADDR_R __stringify(0x2000000)
134#define RAMDISK_ADDR_R __stringify(0x2200000)
135#define SCRIPT_ADDR_R __stringify(0x1800000)
136#define PXEFILE_ADDR_R __stringify(0x1900000)
137
138#define LOAD_ADDRESS_ENV_SETTINGS \
139 "kernel_addr_r=" KERNEL_ADDR_R "\0" \
140 "fdt_addr_r=" FDT_ADDR_R "\0" \
141 "ramdisk_addr_r=" RAMDISK_ADDR_R "\0" \
142 "scriptaddr=" SCRIPT_ADDR_R "\0" \
143 "pxefile_addr_r=" PXEFILE_ADDR_R "\0"
144
145#include <config_distro_bootcmd.h>
146
147#define CONFIG_EXTRA_ENV_SETTINGS \
148 RELOCATION_LIMITS_ENV_SETTINGS \
149 LOAD_ADDRESS_ENV_SETTINGS \
150 "fdtfile=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
151 "console=ttyS0,115200\0" \
152 BOOTENV
153
154#endif /* CONFIG_SPL_BUILD */
155
156#endif /* _CONFIG_TURRIS_OMNIA_H */