blob: 54feca0ecff5c3e9189824e316de0a2526fe1ab3 [file] [log] [blame]
Tom Rini8b0c8a12018-05-06 18:27:01 -04001// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
Patrick Delaunay8eb3b1e2018-03-12 10:46:18 +01002/*
3 * Copyright (C) 2018, STMicroelectronics - All Rights Reserved
Patrick Delaunay8eb3b1e2018-03-12 10:46:18 +01004 */
5#include <config.h>
6#include <common.h>
Patrick Delaunay36e3d112018-07-27 16:37:08 +02007#include <led.h>
Patrice Chotard204079b2018-08-10 17:12:14 +02008#include <clk.h>
9#include <dm.h>
10#include <generic-phy.h>
11#include <phy.h>
12#include <reset.h>
13#include <usb.h>
Patrick Delaunay8eb3b1e2018-03-12 10:46:18 +010014#include <asm/arch/stm32.h>
Patrice Chotard204079b2018-08-10 17:12:14 +020015#include <asm/io.h>
16#include <power/regulator.h>
17#include <usb/dwc2_udc.h>
Patrick Delaunay8eb3b1e2018-03-12 10:46:18 +010018
19/*
20 * Get a global data pointer
21 */
22DECLARE_GLOBAL_DATA_PTR;
23
Patrice Chotard204079b2018-08-10 17:12:14 +020024#define STM32MP_GUSBCFG 0x40002407
25
26#define STM32MP_GGPIO 0x38
27#define STM32MP_GGPIO_VBUS_SENSING BIT(21)
28
29static struct dwc2_plat_otg_data stm32mp_otg_data = {
30 .usb_gusbcfg = STM32MP_GUSBCFG,
31};
32
33static struct reset_ctl usbotg_reset;
34
35int board_usb_init(int index, enum usb_init_type init)
36{
37 struct fdtdec_phandle_args args;
38 struct udevice *dev;
39 const void *blob = gd->fdt_blob;
40 struct clk clk;
41 struct phy phy;
42 int node;
43 int phy_provider;
44 int ret;
45
46 /* find the usb otg node */
47 node = fdt_node_offset_by_compatible(blob, -1, "snps,dwc2");
48 if (node < 0) {
49 debug("Not found usb_otg device\n");
50 return -ENODEV;
51 }
52
53 if (!fdtdec_get_is_enabled(blob, node)) {
54 debug("stm32 usbotg is disabled in the device tree\n");
55 return -ENODEV;
56 }
57
58 /* Enable clock */
59 ret = fdtdec_parse_phandle_with_args(blob, node, "clocks",
60 "#clock-cells", 0, 0, &args);
61 if (ret) {
62 debug("usbotg has no clocks defined in the device tree\n");
63 return ret;
64 }
65
66 ret = uclass_get_device_by_of_offset(UCLASS_CLK, args.node, &dev);
67 if (ret)
68 return ret;
69
70 if (args.args_count != 1) {
71 debug("Can't find clock ID in the device tree\n");
72 return -ENODATA;
73 }
74
75 clk.dev = dev;
76 clk.id = args.args[0];
77
78 ret = clk_enable(&clk);
79 if (ret) {
80 debug("Failed to enable usbotg clock\n");
81 return ret;
82 }
83
84 /* Reset */
85 ret = fdtdec_parse_phandle_with_args(blob, node, "resets",
86 "#reset-cells", 0, 0, &args);
87 if (ret) {
88 debug("usbotg has no resets defined in the device tree\n");
89 goto clk_err;
90 }
91
92 ret = uclass_get_device_by_of_offset(UCLASS_RESET, args.node, &dev);
93 if (ret || args.args_count != 1)
94 goto clk_err;
95
96 usbotg_reset.dev = dev;
97 usbotg_reset.id = args.args[0];
98
99 reset_assert(&usbotg_reset);
100 udelay(2);
101 reset_deassert(&usbotg_reset);
102
103 /* Get USB PHY */
104 ret = fdtdec_parse_phandle_with_args(blob, node, "phys",
105 "#phy-cells", 0, 0, &args);
106 if (!ret) {
107 phy_provider = fdt_parent_offset(blob, args.node);
108 ret = uclass_get_device_by_of_offset(UCLASS_PHY,
109 phy_provider, &dev);
110 if (ret)
111 goto clk_err;
112
113 phy.dev = dev;
114 phy.id = fdtdec_get_uint(blob, args.node, "reg", -1);
115
116 ret = generic_phy_power_on(&phy);
117 if (ret) {
118 debug("unable to power on the phy\n");
119 goto clk_err;
120 }
121
122 ret = generic_phy_init(&phy);
123 if (ret) {
124 debug("failed to init usb phy\n");
125 goto phy_power_err;
126 }
127 }
128
129 /* Parse and store data needed for gadget */
130 stm32mp_otg_data.regs_otg = fdtdec_get_addr(blob, node, "reg");
131 if (stm32mp_otg_data.regs_otg == FDT_ADDR_T_NONE) {
132 debug("usbotg: can't get base address\n");
133 ret = -ENODATA;
134 goto phy_init_err;
135 }
136
137 stm32mp_otg_data.rx_fifo_sz = fdtdec_get_int(blob, node,
138 "g-rx-fifo-size", 0);
139 stm32mp_otg_data.np_tx_fifo_sz = fdtdec_get_int(blob, node,
140 "g-np-tx-fifo-size", 0);
141 stm32mp_otg_data.tx_fifo_sz = fdtdec_get_int(blob, node,
142 "g-tx-fifo-size", 0);
143 /* Enable voltage level detector */
144 if (!(fdtdec_parse_phandle_with_args(blob, node, "usb33d-supply",
145 NULL, 0, 0, &args))) {
146 if (!uclass_get_device_by_of_offset(UCLASS_REGULATOR,
147 args.node, &dev)) {
148 ret = regulator_set_enable(dev, true);
149 if (ret) {
150 debug("Failed to enable usb33d\n");
151 goto phy_init_err;
152 }
153 }
154 }
155 /* Enable vbus sensing */
156 setbits_le32(stm32mp_otg_data.regs_otg + STM32MP_GGPIO,
157 STM32MP_GGPIO_VBUS_SENSING);
158
159 return dwc2_udc_probe(&stm32mp_otg_data);
160
161phy_init_err:
162 generic_phy_exit(&phy);
163
164phy_power_err:
165 generic_phy_power_off(&phy);
166
167clk_err:
168 clk_disable(&clk);
169
170 return ret;
171}
172
173int board_usb_cleanup(int index, enum usb_init_type init)
174{
175 /* Reset usbotg */
176 reset_assert(&usbotg_reset);
177 udelay(2);
178 reset_deassert(&usbotg_reset);
179
180 return 0;
181}
182
Patrick Delaunay8eb3b1e2018-03-12 10:46:18 +0100183int board_late_init(void)
184{
185 return 0;
186}
187
188/* board dependent setup after realloc */
189int board_init(void)
190{
191 /* address of boot parameters */
192 gd->bd->bi_boot_params = STM32_DDR_BASE + 0x100;
193
Patrick Delaunay36e3d112018-07-27 16:37:08 +0200194 if (IS_ENABLED(CONFIG_LED))
195 led_default_state();
196
Patrick Delaunay8eb3b1e2018-03-12 10:46:18 +0100197 return 0;
198}