Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / 5c1b071308ecaec4e070d12f54fb5908a2e5f502 / . / include / configs / snapper9g45.h
blob: c56fb378312b88b88ba91b8f3eeb3adc34d5c7f1 [file] [log] [blame]
Tom Rini10e47792018-05-06 17:58:06 -0400[diff] [blame]1/* SPDX-License-Identifier: GPL-2.0+ */
Andre Renaud2369c9c2016-05-05 07:28:22 -0600[diff] [blame]2/*
3 * Bluewater Systems Snapper 9G45 module
4 *
5 * (C) Copyright 2011 Bluewater Systems
6 * Author: Andre Renaud <andre@bluewatersys.com>
7 * Author: Ryan Mallon <ryan@bluewatersys.com>
Andre Renaud2369c9c2016-05-05 07:28:22 -0600[diff] [blame]8 */
9
10#ifndef __CONFIG_H
11#define __CONFIG_H
12
13/* SoC type is defined in boards.cfg */
14#include <asm/hardware.h>
15#include <linux/sizes.h>
16
Andre Renaud2369c9c2016-05-05 07:28:22 -0600[diff] [blame]17/* ARM asynchronous clock */
18#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */
19#define CONFIG_SYS_AT91_SLOW_CLOCK 32768
20
21/* CPU */
Andre Renaud2369c9c2016-05-05 07:28:22 -0600[diff] [blame]22
23/* SDRAM */
Andre Renaud2369c9c2016-05-05 07:28:22 -0600[diff] [blame]24#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS6
25#define CONFIG_SYS_SDRAM_SIZE (128 * 1024 * 1024) /* 64MB */
Tom Rini4ddbade2022-05-25 12:16:03 -0400[diff] [blame]26#define CONFIG_SYS_INIT_RAM_SIZE 0x1000
27#define CONFIG_SYS_INIT_RAM_ADDR ATMEL_BASE_SRAM
Andre Renaud2369c9c2016-05-05 07:28:22 -0600[diff] [blame]28
29/* Mem test settings */
Andre Renaud2369c9c2016-05-05 07:28:22 -0600[diff] [blame]30
31/* NAND Flash */
Andre Renaud2369c9c2016-05-05 07:28:22 -0600[diff] [blame]32#define CONFIG_SYS_NAND_ECC_BASE ATMEL_BASE_ECC
Andre Renaud2369c9c2016-05-05 07:28:22 -0600[diff] [blame]33#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3
34#define CONFIG_SYS_NAND_DBW_8
35#define CONFIG_SYS_NAND_MASK_ALE (1 << 21) /* AD21 */
36#define CONFIG_SYS_NAND_MASK_CLE (1 << 22) /* AD22 */
37#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14
38#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC8
39
Andre Renaud2369c9c2016-05-05 07:28:22 -0600[diff] [blame]40/* UARTs/Serial console */
Andre Renaud2369c9c2016-05-05 07:28:22 -0600[diff] [blame]41
42/* Boot options */
Andre Renaud2369c9c2016-05-05 07:28:22 -0600[diff] [blame]43
Andre Renaud2369c9c2016-05-05 07:28:22 -0600[diff] [blame]44/* Environment settings */
Andre Renaud2369c9c2016-05-05 07:28:22 -0600[diff] [blame]45
46#define CONFIG_EXTRA_ENV_SETTINGS \
47 "ethaddr=00:00:00:00:00:00\0" \
48 "serial=0\0" \
49 "stdout=serial_atmel\0" \
50 "stderr=serial_atmel\0" \
51 "stdin=serial_atmel\0" \
52 "bootlimit=3\0" \
53 "loadaddr=0x71000000\0" \
54 "board_rev=2\0" \
55 "bootfile=/tftpboot/uImage\0" \
56 "bootargs_def=console=ttyS0,115200 panic=5 quiet lpj=997376\0" \
57 "nfsroot=/export/root\0" \
58 "boot_working=setenv bootargs $bootargs_def; nboot $loadaddr 0 0x20c0000 && bootm\0" \
59 "boot_safe=setenv bootargs $bootargs_def; nboot $loadaddr 0 0xc0000 && bootm\0" \
60 "boot_tftp=setenv bootargs $bootargs_def ip=any nfsroot=$nfsroot; setenv autoload y && bootp && bootm\0" \
61 "boot_usb=setenv bootargs $bootargs_def; usb start && usb storage && fatload usb 0:1 $loadaddr dds-xm200.bin && bootm\0" \
62 "boot_mmc=setenv bootargs $bootargs_def; mmc rescan && fatload mmc 0:1 $loadaddr dds-xm200.bin && bootm\0" \
63 "bootcmd=run boot_mmc ; run boot_usb ; run boot_working ; run boot_safe\0" \
64 "altbootcmd=run boot_mmc ; run boot_usb ; run boot_safe ; run boot_working\0"
65
66/* Console settings */
Andre Renaud2369c9c2016-05-05 07:28:22 -0600[diff] [blame]67
Andre Renaud2369c9c2016-05-05 07:28:22 -0600[diff] [blame]68#endif /* __CONFIG_H */