blob: 660c907a6ba3340ce2a5531ad1ee20e3320aa361 [file] [log] [blame]
Patrick Delaunaye4bdd542022-05-20 18:24:42 +02001// SPDX-License-Identifier: GPL-2.0-or-later OR BSD-3-Clause
2/*
3 * Copyright (C) 2021, STMicroelectronics - All Rights Reserved
4 */
5
6#define LOG_CATEGORY LOGC_ARCH
7
8#include <common.h>
9#include <env.h>
10#include <log.h>
11#include <asm/io.h>
12#include <asm/arch/bsec.h>
13#include <asm/arch/stm32.h>
14#include <asm/arch/sys_proto.h>
15#include <dm/device.h>
16#include <dm/uclass.h>
17
18/* RCC register */
19#define RCC_TZCR (STM32_RCC_BASE + 0x00)
20#define RCC_BDCR (STM32_RCC_BASE + 0x0140)
21#define RCC_MP_APB5ENSETR (STM32_RCC_BASE + 0x0208)
22#define RCC_MP_AHB5ENSETR (STM32_RCC_BASE + 0x0210)
23#define RCC_DBGCFGR (STM32_RCC_BASE + 0x080C)
24
25#define RCC_BDCR_VSWRST BIT(31)
26#define RCC_BDCR_RTCSRC GENMASK(17, 16)
27
28#define RCC_DBGCFGR_DBGCKEN BIT(8)
29
30/* DBGMCU register */
31#define DBGMCU_IDC (STM32_DBGMCU_BASE + 0x00)
32#define DBGMCU_APB4FZ1 (STM32_DBGMCU_BASE + 0x2C)
33#define DBGMCU_APB4FZ1_IWDG2 BIT(2)
34
35/* Security register */
36#define ETZPC_TZMA1_SIZE (STM32_ETZPC_BASE + 0x04)
37#define ETZPC_DECPROT0 (STM32_ETZPC_BASE + 0x10)
38
39#define TZC_GATE_KEEPER (STM32_TZC_BASE + 0x008)
40#define TZC_REGION_ATTRIBUTE0 (STM32_TZC_BASE + 0x110)
41#define TZC_REGION_ID_ACCESS0 (STM32_TZC_BASE + 0x114)
42
43#define TAMP_CR1 (STM32_TAMP_BASE + 0x00)
44
45#define PWR_CR1 (STM32_PWR_BASE + 0x00)
46#define PWR_MCUCR (STM32_PWR_BASE + 0x14)
47#define PWR_CR1_DBP BIT(8)
48#define PWR_MCUCR_SBF BIT(6)
49
50/* GPIOZ registers */
51#define GPIOZ_SECCFGR 0x54004030
52
53/* DBGMCU register */
54#define DBGMCU_IDC (STM32_DBGMCU_BASE + 0x00)
55#define DBGMCU_IDC_DEV_ID_MASK GENMASK(11, 0)
56#define DBGMCU_IDC_DEV_ID_SHIFT 0
57#define DBGMCU_IDC_REV_ID_MASK GENMASK(31, 16)
58#define DBGMCU_IDC_REV_ID_SHIFT 16
59
60/* boot interface from Bootrom
61 * - boot instance = bit 31:16
62 * - boot device = bit 15:0
63 */
64#define BOOTROM_PARAM_ADDR 0x2FFC0078
65#define BOOTROM_MODE_MASK GENMASK(15, 0)
66#define BOOTROM_MODE_SHIFT 0
67#define BOOTROM_INSTANCE_MASK GENMASK(31, 16)
68#define BOOTROM_INSTANCE_SHIFT 16
69
70/* Device Part Number (RPN) = OTP_DATA1 lower 8 bits */
71#define RPN_SHIFT 0
72#define RPN_MASK GENMASK(7, 0)
73
74/* Package = bit 27:29 of OTP16 => STM32MP15_PKG defines
75 * - 100: LBGA448 (FFI) => AA = LFBGA 18x18mm 448 balls p. 0.8mm
76 * - 011: LBGA354 (LCI) => AB = LFBGA 16x16mm 359 balls p. 0.8mm
77 * - 010: TFBGA361 (FFC) => AC = TFBGA 12x12mm 361 balls p. 0.5mm
78 * - 001: TFBGA257 (LCC) => AD = TFBGA 10x10mm 257 balls p. 0.5mm
79 * - others: Reserved
80 */
81#define PKG_SHIFT 27
82#define PKG_MASK GENMASK(2, 0)
83
84static void security_init(void)
85{
86 /* Disable the backup domain write protection */
87 /* the protection is enable at each reset by hardware */
88 /* And must be disable by software */
89 setbits_le32(PWR_CR1, PWR_CR1_DBP);
90
91 while (!(readl(PWR_CR1) & PWR_CR1_DBP))
92 ;
93
94 /* If RTC clock isn't enable so this is a cold boot then we need
95 * to reset the backup domain
96 */
97 if (!(readl(RCC_BDCR) & RCC_BDCR_RTCSRC)) {
98 setbits_le32(RCC_BDCR, RCC_BDCR_VSWRST);
99 while (!(readl(RCC_BDCR) & RCC_BDCR_VSWRST))
100 ;
101 clrbits_le32(RCC_BDCR, RCC_BDCR_VSWRST);
102 }
103
104 /* allow non secure access in Write/Read for all peripheral */
105 writel(GENMASK(25, 0), ETZPC_DECPROT0);
106
107 /* Open SYSRAM for no secure access */
108 writel(0x0, ETZPC_TZMA1_SIZE);
109
110 /* enable TZC1 TZC2 clock */
111 writel(BIT(11) | BIT(12), RCC_MP_APB5ENSETR);
112
113 /* Region 0 set to no access by default */
114 /* bit 0 / 16 => nsaid0 read/write Enable
115 * bit 1 / 17 => nsaid1 read/write Enable
116 * ...
117 * bit 15 / 31 => nsaid15 read/write Enable
118 */
119 writel(0xFFFFFFFF, TZC_REGION_ID_ACCESS0);
120 /* bit 30 / 31 => Secure Global Enable : write/read */
121 /* bit 0 / 1 => Region Enable for filter 0/1 */
122 writel(BIT(0) | BIT(1) | BIT(30) | BIT(31), TZC_REGION_ATTRIBUTE0);
123
124 /* Enable Filter 0 and 1 */
125 setbits_le32(TZC_GATE_KEEPER, BIT(0) | BIT(1));
126
127 /* RCC trust zone deactivated */
128 writel(0x0, RCC_TZCR);
129
130 /* TAMP: deactivate the internal tamper
131 * Bit 23 ITAMP8E: monotonic counter overflow
132 * Bit 20 ITAMP5E: RTC calendar overflow
133 * Bit 19 ITAMP4E: HSE monitoring
134 * Bit 18 ITAMP3E: LSE monitoring
135 * Bit 16 ITAMP1E: RTC power domain supply monitoring
136 */
137 writel(0x0, TAMP_CR1);
138
139 /* GPIOZ: deactivate the security */
140 writel(BIT(0), RCC_MP_AHB5ENSETR);
141 writel(0x0, GPIOZ_SECCFGR);
142}
143
144/*
145 * Debug init
146 */
147void dbgmcu_init(void)
148{
149 /*
150 * Freeze IWDG2 if Cortex-A7 is in debug mode
151 * done in TF-A for TRUSTED boot and
152 * DBGMCU access is controlled by BSEC_DENABLE.DBGSWENABLE
153 */
154 if (bsec_dbgswenable()) {
155 setbits_le32(RCC_DBGCFGR, RCC_DBGCFGR_DBGCKEN);
156 setbits_le32(DBGMCU_APB4FZ1, DBGMCU_APB4FZ1_IWDG2);
157 }
158}
159
160void spl_board_init(void)
161{
162 struct udevice *dev;
163 int ret;
164
165 dbgmcu_init();
166
167 /* force probe of BSEC driver to shadow the upper OTP */
168 ret = uclass_get_device_by_driver(UCLASS_MISC, DM_DRIVER_GET(stm32mp_bsec), &dev);
169 if (ret)
170 log_warning("BSEC probe failed: %d\n", ret);
171}
172
173/* get bootmode from ROM code boot context: saved in TAMP register */
174static void update_bootmode(void)
175{
176 u32 boot_mode;
177 u32 bootrom_itf = readl(BOOTROM_PARAM_ADDR);
178 u32 bootrom_device, bootrom_instance;
179
180 /* enable TAMP clock = RTCAPBEN */
181 writel(BIT(8), RCC_MP_APB5ENSETR);
182
183 /* read bootrom context */
184 bootrom_device =
185 (bootrom_itf & BOOTROM_MODE_MASK) >> BOOTROM_MODE_SHIFT;
186 bootrom_instance =
187 (bootrom_itf & BOOTROM_INSTANCE_MASK) >> BOOTROM_INSTANCE_SHIFT;
188 boot_mode =
189 ((bootrom_device << BOOT_TYPE_SHIFT) & BOOT_TYPE_MASK) |
190 ((bootrom_instance << BOOT_INSTANCE_SHIFT) &
191 BOOT_INSTANCE_MASK);
192
193 /* save the boot mode in TAMP backup register */
194 clrsetbits_le32(TAMP_BOOT_CONTEXT,
195 TAMP_BOOT_MODE_MASK,
196 boot_mode << TAMP_BOOT_MODE_SHIFT);
197}
198
199/* weak function: STM32MP15x mach init for boot without TFA */
200void stm32mp_cpu_init(void)
201{
202 if (IS_ENABLED(CONFIG_SPL_BUILD)) {
203 security_init();
204 update_bootmode();
205 }
206
207 /* reset copro state in SPL, when used, or in U-Boot */
208 if (!IS_ENABLED(CONFIG_SPL) || IS_ENABLED(CONFIG_SPL_BUILD)) {
209 /* Reset Coprocessor state unless it wakes up from Standby power mode */
210 if (!(readl(PWR_MCUCR) & PWR_MCUCR_SBF)) {
211 writel(TAMP_COPRO_STATE_OFF, TAMP_COPRO_STATE);
212 writel(0, TAMP_COPRO_RSC_TBL_ADDRESS);
213 }
214 }
215}
216
217static u32 read_idc(void)
218{
219 /* DBGMCU access is controlled by BSEC_DENABLE.DBGSWENABLE */
220 if (bsec_dbgswenable()) {
221 setbits_le32(RCC_DBGCFGR, RCC_DBGCFGR_DBGCKEN);
222
223 return readl(DBGMCU_IDC);
224 }
225
226 return CPU_DEV_STM32MP15; /* STM32MP15x and unknown revision */
227}
228
229u32 get_cpu_dev(void)
230{
231 return (read_idc() & DBGMCU_IDC_DEV_ID_MASK) >> DBGMCU_IDC_DEV_ID_SHIFT;
232}
233
234u32 get_cpu_rev(void)
235{
236 return (read_idc() & DBGMCU_IDC_REV_ID_MASK) >> DBGMCU_IDC_REV_ID_SHIFT;
237}
238
239/* Get Device Part Number (RPN) from OTP */
240static u32 get_cpu_rpn(void)
241{
242 return get_otp(BSEC_OTP_RPN, RPN_SHIFT, RPN_MASK);
243}
244
245u32 get_cpu_type(void)
246{
247 return (get_cpu_dev() << 16) | get_cpu_rpn();
248}
249
Patrick Delaunay6425f582022-05-20 18:24:47 +0200250int get_eth_nb(void)
251{
252 return 1;
253}
254
Patrick Delaunaye4bdd542022-05-20 18:24:42 +0200255/* Get Package options from OTP */
256u32 get_cpu_package(void)
257{
258 return get_otp(BSEC_OTP_PKG, PKG_SHIFT, PKG_MASK);
259}
260
261static const char * const soc_type[] = {
262 "????",
263 "151C", "151A", "151F", "151D",
264 "153C", "153A", "153F", "153D",
265 "157C", "157A", "157F", "157D"
266};
267
268static const char * const soc_pkg[] = { "??", "AD", "AC", "AB", "AA" };
269static const char * const soc_rev[] = { "?", "A", "B", "Z" };
270
271static void get_cpu_string_offsets(unsigned int *type, unsigned int *pkg,
272 unsigned int *rev)
273{
274 u32 cpu_type = get_cpu_type();
275 u32 ct = cpu_type & ~(BIT(7) | BIT(0));
276 u32 cm = ((cpu_type & BIT(7)) >> 6) | (cpu_type & BIT(0));
Patrick Delaunaye4bdd542022-05-20 18:24:42 +0200277
278 /* Bits 0 and 7 are the ACDF, 00:C 01:A 10:F 11:D */
279 switch (ct) {
280 case CPU_STM32MP151Cxx:
281 *type = cm + 1;
282 break;
283 case CPU_STM32MP153Cxx:
284 *type = cm + 5;
285 break;
286 case CPU_STM32MP157Cxx:
287 *type = cm + 9;
288 break;
289 default:
290 *type = 0;
291 break;
292 }
293
294 /* Package */
Patrick Delaunay14704dc2022-06-20 09:50:01 +0200295 *pkg = get_cpu_package();
296 if (*pkg > STM32MP15_PKG_AA_LBGA448)
297 *pkg = STM32MP15_PKG_UNKNOWN;
Patrick Delaunaye4bdd542022-05-20 18:24:42 +0200298
299 /* Revision */
300 switch (get_cpu_rev()) {
301 case CPU_REV1:
302 *rev = 1;
303 break;
304 case CPU_REV2:
305 *rev = 2;
306 break;
307 case CPU_REV2_1:
308 *rev = 3;
309 break;
310 default:
311 *rev = 0;
312 break;
313 }
314}
315
316void get_soc_name(char name[SOC_NAME_SIZE])
317{
318 unsigned int type, pkg, rev;
319
320 get_cpu_string_offsets(&type, &pkg, &rev);
321
322 snprintf(name, SOC_NAME_SIZE, "STM32MP%s%s Rev.%s",
323 soc_type[type], soc_pkg[pkg], soc_rev[rev]);
324}
325
326static void setup_soc_type_pkg_rev(void)
327{
328 unsigned int type, pkg, rev;
329
330 get_cpu_string_offsets(&type, &pkg, &rev);
331
332 env_set("soc_type", soc_type[type]);
333 env_set("soc_pkg", soc_pkg[pkg]);
334 env_set("soc_rev", soc_rev[rev]);
335}
336
337/* weak function called in arch_misc_init */
338void stm32mp_misc_init(void)
339{
340 setup_soc_type_pkg_rev();
341}