blob: 1abaabf7e39129647ee26f343d278c070b535913 [file] [log] [blame]
Heiko Schocher05729822015-05-18 13:32:31 +02001/*
2 * (C) Copyright 2015
3 * (C) Copyright 2014
4 * Heiko Schocher, DENX Software Engineering, hs@denx.de.
5 *
6 * Based on:
7 * Copyright (C) 2012 Freescale Semiconductor, Inc.
8 *
9 * Configuration settings for the Freescale i.MX6Q SabreSD board.
10 *
11 * SPDX-License-Identifier: GPL-2.0+
12 */
13#ifndef __ARISTAINETOS_COMMON_CONFIG_H
14#define __ARISTAINETOS_COMMON_CONFIG_H
15
Heiko Schocher05729822015-05-18 13:32:31 +020016#include "mx6_common.h"
Heiko Schocher05729822015-05-18 13:32:31 +020017
Heiko Schocher05729822015-05-18 13:32:31 +020018#define CONFIG_MACH_TYPE 4501
19#define CONFIG_MMCROOT "/dev/mmcblk0p1"
20#define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024)
21
Heiko Schocher05729822015-05-18 13:32:31 +020022/* Size of malloc() pool */
23#define CONFIG_SYS_MALLOC_LEN (64 * SZ_1M)
24
25#define CONFIG_BOARD_EARLY_INIT_F
Heiko Schocher05729822015-05-18 13:32:31 +020026
27#define CONFIG_MXC_UART
28
29#define CONFIG_CMD_FUSE
30#define CONFIG_MXC_OCOTP
31
32/* MMC Configs */
Heiko Schocher05729822015-05-18 13:32:31 +020033#define CONFIG_SYS_FSL_ESDHC_ADDR 0
34
Heiko Schocher05729822015-05-18 13:32:31 +020035#define CONFIG_CMD_PING
36#define CONFIG_CMD_DHCP
37#define CONFIG_CMD_MII
38#define CONFIG_CMD_NET
39#define CONFIG_FEC_MXC
40#define CONFIG_MII
41#define IMX_FEC_BASE ENET_BASE_ADDR
42#define CONFIG_ETHPRIME "FEC"
43#define CONFIG_FEC_MXC_PHYADDR 0
44
45#define CONFIG_PHYLIB
46#define CONFIG_PHY_MICREL
47
48#define CONFIG_CMD_SF
49#define CONFIG_SPI_FLASH
50#define CONFIG_SPI_FLASH_MTD
51#define CONFIG_SPI_FLASH_STMICRO
52#define CONFIG_MXC_SPI
53#define CONFIG_SF_DEFAULT_BUS 3
54#define CONFIG_SF_DEFAULT_SPEED 20000000
55#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
56#define CONFIG_SYS_SPI_ST_ENABLE_WP_PIN
57
Heiko Schocher05729822015-05-18 13:32:31 +020058/* Command definition */
Heiko Schocher05729822015-05-18 13:32:31 +020059#define CONFIG_CMD_BMODE
Heiko Schocher05729822015-05-18 13:32:31 +020060#define CONFIG_CMD_SETEXPR
Heiko Schocher05729822015-05-18 13:32:31 +020061
Heiko Schocher05729822015-05-18 13:32:31 +020062#define CONFIG_EXTRA_ENV_SETTINGS \
63 "script=u-boot.scr\0" \
64 "fit_file=/boot/system.itb\0" \
65 "loadaddr=0x12000000\0" \
66 "fit_addr_r=0x14000000\0" \
67 "uboot=/boot/u-boot.imx\0" \
68 "uboot_sz=d0000\0" \
69 "rescue_sys_addr=f0000\0" \
70 "rescue_sys_length=f10000\0" \
71 "panel=lb07wv8\0" \
72 "splashpos=m,m\0" \
73 "console=" CONFIG_CONSOLE_DEV "\0" \
74 "fdt_high=0xffffffff\0" \
75 "initrd_high=0xffffffff\0" \
76 "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
77 "set_fit_default=fdt addr ${fit_addr_r};fdt set /configurations " \
78 "default ${board_type}\0" \
79 "get_env=mw ${loadaddr} 0 0x20000;" \
80 "mmc rescan;" \
81 "ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} env.txt;" \
82 "env import -t ${loadaddr}\0" \
83 "default_env=mw ${loadaddr} 0 0x20000;" \
84 "env export -t ${loadaddr} serial# ethaddr eth1addr " \
85 "board_type panel;" \
86 "env default -a;" \
87 "env import -t ${loadaddr}\0" \
88 "loadbootscript=" \
89 "ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
90 "bootscript=echo Running bootscript from mmc ...; " \
91 "source\0" \
92 "mmcpart=1\0" \
93 "mmcdev=0\0" \
94 "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
95 "mmcargs=setenv bootargs console=${console},${baudrate} " \
96 "root=${mmcroot}\0" \
97 "mmcboot=echo Booting from mmc ...; " \
98 "run mmcargs addmtd addmisc set_fit_default;" \
99 "bootm ${fit_addr_r}\0" \
100 "mmc_load_fit=ext2load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \
101 "${fit_file}\0" \
102 "mmc_load_uboot=ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
103 "${uboot}\0" \
104 "mmc_upd_uboot=mw.b ${loadaddr} 0xff ${uboot_sz};" \
105 "setexpr cmp_buf ${loadaddr} + ${uboot_sz};" \
106 "setexpr uboot_maxsize ${uboot_sz} - 400;" \
107 "mw.b ${cmp_buf} 0x00 ${uboot_sz};" \
108 "run mmc_load_uboot;sf probe;sf erase 0 ${uboot_sz};" \
109 "sf write ${loadaddr} 400 ${filesize};" \
110 "sf read ${cmp_buf} 400 ${uboot_sz};" \
111 "cmp.b ${loadaddr} ${cmp_buf} ${uboot_maxsize}\0" \
112 "ubiboot=echo Booting from ubi ...; " \
113 "run ubiargs addmtd addmisc set_fit_default;" \
114 "bootm ${fit_addr_r}\0" \
115 "ubifs_load_fit=sf probe;ubi part ubi 2048;ubifsmount ubi:rootfs;" \
116 "ubifsload ${fit_addr_r} /boot/system.itb; " \
117 "imi ${fit_addr_r}\0 " \
118 "rescueargs=setenv bootargs console=${console},${baudrate} " \
119 "root=/dev/ram rw\0 " \
120 "rescueboot=echo Booting rescue system from NOR ...; " \
121 "run rescueargs addmtd addmisc set_fit_default;" \
122 "bootm ${fit_addr_r}\0" \
123 "rescue_load_fit=sf probe;sf read ${fit_addr_r} ${rescue_sys_addr} " \
124 "${rescue_sys_length}; imi ${fit_addr_r}\0" \
125 CONFIG_EXTRA_ENV_BOARD_SETTINGS
126
127#define CONFIG_BOOTCOMMAND \
128 "mmc dev ${mmcdev};" \
129 "if mmc rescan; then " \
130 "if run loadbootscript; then " \
131 "run bootscript; " \
132 "else " \
133 "if run mmc_load_fit; then " \
134 "run mmcboot; " \
135 "else " \
136 "if run ubifs_load_fit; then " \
137 "run ubiboot; " \
138 "else " \
139 "if run rescue_load_fit; then " \
140 "run rescueboot; " \
141 "else " \
142 "echo RESCUE SYSTEM BOOT " \
143 "FAILURE;" \
144 "fi; " \
145 "fi; " \
146 "fi; " \
147 "fi; " \
148 "else " \
149 "if run ubifs_load_fit; then " \
150 "run ubiboot; " \
151 "else " \
152 "if run rescue_load_fit; then " \
153 "run rescueboot; " \
154 "else " \
155 "echo RESCUE SYSTEM BOOT FAILURE;" \
156 "fi; " \
157 "fi; " \
158 "fi"
159
160#define CONFIG_ARP_TIMEOUT 200UL
161
Heiko Schocher05729822015-05-18 13:32:31 +0200162/* Print Buffer Size */
163#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
Heiko Schocher05729822015-05-18 13:32:31 +0200164
165#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
166#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x100000)
167#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
168
Heiko Schocher05729822015-05-18 13:32:31 +0200169#define CONFIG_STACKSIZE (128 * 1024)
170
171/* Physical Memory Map */
172#define CONFIG_NR_DRAM_BANKS 1
173#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
174
175#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
176#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
177#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
178
179#define CONFIG_SYS_INIT_SP_OFFSET \
180 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
181#define CONFIG_SYS_INIT_SP_ADDR \
182 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
183
Peter Robinson4b671502015-05-22 17:30:45 +0100184/* Environment organization */
Heiko Schocher05729822015-05-18 13:32:31 +0200185#define CONFIG_ENV_SIZE (12 * 1024)
186#define CONFIG_ENV_IS_IN_SPI_FLASH
187#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
188#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
189#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
190#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
191#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
192#define CONFIG_ENV_SECT_SIZE (0x010000)
193#define CONFIG_ENV_OFFSET (0x0d0000)
194#define CONFIG_ENV_OFFSET_REDUND (0x0e0000)
195
Heiko Schocher05729822015-05-18 13:32:31 +0200196#define CONFIG_SYS_FSL_USDHC_NUM 2
197
198/* I2C */
199#define CONFIG_CMD_I2C
200#define CONFIG_SYS_I2C
201#define CONFIG_SYS_I2C_MXC
202#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
203#define CONFIG_SYS_I2C_SPEED 100000
204#define CONFIG_SYS_I2C_SLAVE 0x7f
205#define CONFIG_SYS_I2C_NOPROBES { {0, 0x00} }
206
Heiko Schocher05729822015-05-18 13:32:31 +0200207/* NAND stuff */
208#define CONFIG_CMD_NAND
209#define CONFIG_CMD_NAND_TRIMFFS
210#define CONFIG_NAND_MXS
211#define CONFIG_SYS_MAX_NAND_DEVICE 1
212#define CONFIG_SYS_NAND_BASE 0x40000000
213#define CONFIG_SYS_NAND_5_ADDR_CYCLE
214#define CONFIG_SYS_NAND_ONFI_DETECTION
215
216/* DMA stuff, needed for GPMI/MXS NAND support */
217#define CONFIG_APBH_DMA
218#define CONFIG_APBH_DMA_BURST
219#define CONFIG_APBH_DMA_BURST8
220
221/* RTC */
222#define CONFIG_SYS_I2C_RTC_ADDR 0x68
223#define CONFIG_SYS_RTC_BUS_NUM 2
224#define CONFIG_RTC_M41T11
225#define CONFIG_CMD_DATE
226
227/* USB Configs */
228#define CONFIG_CMD_USB
Heiko Schocher05729822015-05-18 13:32:31 +0200229#define CONFIG_USB_EHCI
230#define CONFIG_USB_EHCI_MX6
231#define CONFIG_USB_STORAGE
232#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
233#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
234#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
235#define CONFIG_MXC_USB_FLAGS 0
236
237/* UBI support */
Peter Robinsonf320d702015-05-22 17:30:51 +0100238#define CONFIG_LZO
Heiko Schocher05729822015-05-18 13:32:31 +0200239#define CONFIG_CMD_MTDPARTS
240#define CONFIG_MTD_PARTITIONS
241#define CONFIG_MTD_DEVICE
242#define CONFIG_RBTREE
Heiko Schocher05729822015-05-18 13:32:31 +0200243#define CONFIG_CMD_UBI
244#define CONFIG_CMD_UBIFS
245
246#define CONFIG_MTD_UBI_FASTMAP
247#define CONFIG_MTD_UBI_FASTMAP_AUTOCONVERT 1
248
249#define CONFIG_HW_WATCHDOG
250#define CONFIG_IMX_WATCHDOG
251
252#define CONFIG_FIT
253
254/* Framebuffer */
255#define CONFIG_VIDEO
256#define CONFIG_VIDEO_IPUV3
257/* check this console not needed, after test remove it */
258#define CONFIG_CFB_CONSOLE
259#define CONFIG_VGA_AS_SINGLE_DEVICE
260#define CONFIG_SYS_CONSOLE_IS_IN_ENV
261#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
262#define CONFIG_VIDEO_BMP_RLE8
263#define CONFIG_SPLASH_SCREEN
264#define CONFIG_SPLASH_SCREEN_ALIGN
265#define CONFIG_BMP_16BPP
266#define CONFIG_VIDEO_LOGO
267#define CONFIG_VIDEO_BMP_LOGO
268#define CONFIG_IPUV3_CLK 198000000
269#define CONFIG_IMX_VIDEO_SKIP
270
271#define CONFIG_CMD_BMP
272
273#define CONFIG_PWM_IMX
274#define CONFIG_IMX6_PWM_PER_CLK 66000000
275
276#endif /* __ARISTAINETOS_COMMON_CONFIG_H */