| Hans de Goede | e184748 | 2015-05-14 19:01:40 +0200 | [diff] [blame] | 1 | # The ga10h is an 10" tablet with an A33 or A23 soc, 1G RAM, 8G or 16G nand, |
| 2 | # sdio wifi, 2 micro usb ports, 1 otg and 1 host and 1 micro sd slot. |
| 3 | # |
| 4 | # This defconfig is for the v1.1 pcb with an a33 soc. |
| 5 | CONFIG_SPL=y |
| 6 | CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5" |
| 7 | CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-ippo-q8h-v1.2-lcd1024x600" |
| 8 | CONFIG_USB_MUSB_SUNXI=y |
| 9 | CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE" |
| 10 | CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT" |
| 11 | CONFIG_AXP_GPIO=y |
| 12 | CONFIG_VIDEO_LCD_MODE="x:1024,y:600,depth:18,pclk_khz:52000,le:138,ri:162,up:22,lo:10,hs:20,vs:3,sync:3,vmode:0" |
| 13 | CONFIG_VIDEO_LCD_PANEL_LVDS=y |
| 14 | CONFIG_VIDEO_LCD_DCLK_PHASE=0 |
| 15 | CONFIG_VIDEO_LCD_POWER="PH7" |
| 16 | CONFIG_VIDEO_LCD_BL_EN="PH6" |
| 17 | CONFIG_VIDEO_LCD_BL_PWM="PH0" |
| 18 | #CONFIG_VIDEO_LCD_BL_PWM_ACTIVE_LOW=n |
| 19 | CONFIG_ARM=y |
| 20 | CONFIG_ARCH_SUNXI=y |
| 21 | CONFIG_MACH_SUN8I_A33=y |
| 22 | CONFIG_DRAM_CLK=432 |
| 23 | # zq = 0x3bbb |
| 24 | CONFIG_DRAM_ZQ=15291 |
| 25 | CONFIG_DRAM_ODT_EN=y |
| 26 | # Wifi power |
| 27 | CONFIG_AXP221_DLDO1_VOLT=3300 |
| 28 | # aldo1 is connected to VCC-IO, VCC-PD, VCC-USB and VCC-HP |
| 29 | CONFIG_AXP221_ALDO1_VOLT=3000 |