Heiko Schocher | 58cb84d | 2011-07-16 00:06:42 +0000 | [diff] [blame] | 1 | /* |
| 2 | * (C) Copyright 2011 |
| 3 | * Heiko Schocher, DENX Software Engineering, hs@denx.de. |
| 4 | * |
| 5 | * Based on: |
| 6 | * (C) Copyright 2009 |
| 7 | * Stefano Babic, DENX Software Engineering, sbabic@denx.de. |
| 8 | * |
| 9 | * (C) Copyright 2008 |
| 10 | * Marvell Semiconductor <www.marvell.com> |
| 11 | * Written-by: Prafulla Wadaskar <prafulla@marvell.com> |
| 12 | * |
| 13 | * See file CREDITS for list of people who contributed to this |
| 14 | * project. |
| 15 | * |
| 16 | * This program is free software; you can redistribute it and/or |
| 17 | * modify it under the terms of the GNU General Public License as |
| 18 | * published by the Free Software Foundation; either version 2 of |
| 19 | * the License, or (at your option) any later version. |
| 20 | * |
| 21 | * This program is distributed in the hope that it will be useful, |
| 22 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 23 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 24 | * GNU General Public License for more details. |
| 25 | * |
| 26 | * You should have received a copy of the GNU General Public License |
| 27 | * along with this program; if not, write to the Free Software |
| 28 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| 29 | * MA 02111-1307 USA |
| 30 | */ |
| 31 | |
| 32 | /* Required to obtain the getline prototype from stdio.h */ |
| 33 | #define _GNU_SOURCE |
| 34 | |
| 35 | #include "mkimage.h" |
| 36 | #include <image.h> |
| 37 | #include "ublimage.h" |
| 38 | |
| 39 | /* |
| 40 | * Supported commands for configuration file |
| 41 | */ |
| 42 | static table_entry_t ublimage_cmds[] = { |
| 43 | {CMD_BOOT_MODE, "MODE", "UBL special modes", }, |
| 44 | {CMD_ENTRY, "ENTRY", "Entry point addr for bootloader", }, |
| 45 | {CMD_PAGE, "PAGES", |
| 46 | "number of pages (size of bootloader)", }, |
| 47 | {CMD_ST_BLOCK, "START_BLOCK", |
| 48 | "block number where bootloader is present", }, |
| 49 | {CMD_ST_PAGE, "START_PAGE", |
| 50 | "page number where bootloader is present", }, |
| 51 | {CMD_LD_ADDR, "LD_ADDR", |
| 52 | "load addr", }, |
| 53 | {-1, "", "", }, |
| 54 | }; |
| 55 | |
| 56 | /* |
| 57 | * Supported Boot options for configuration file |
| 58 | * this is needed to set the correct flash offset |
| 59 | */ |
| 60 | static table_entry_t ublimage_bootops[] = { |
| 61 | {UBL_MAGIC_SAFE, "safe", "Safe boot mode", }, |
| 62 | {-1, "", "Invalid", }, |
| 63 | }; |
| 64 | |
| 65 | static struct ubl_header ublimage_header; |
| 66 | |
| 67 | static uint32_t get_cfg_value(char *token, char *name, int linenr) |
| 68 | { |
| 69 | char *endptr; |
| 70 | uint32_t value; |
| 71 | |
| 72 | errno = 0; |
| 73 | value = strtoul(token, &endptr, 16); |
| 74 | if (errno || (token == endptr)) { |
| 75 | fprintf(stderr, "Error: %s[%d] - Invalid hex data(%s)\n", |
| 76 | name, linenr, token); |
| 77 | exit(EXIT_FAILURE); |
| 78 | } |
| 79 | return value; |
| 80 | } |
| 81 | |
| 82 | static void print_hdr(struct ubl_header *ubl_hdr) |
| 83 | { |
| 84 | printf("Image Type : Davinci UBL Boot Image\n"); |
| 85 | printf("UBL magic : %08x\n", ubl_hdr->magic); |
| 86 | printf("Entry Point: %08x\n", ubl_hdr->entry); |
| 87 | printf("nr of pages: %08x\n", ubl_hdr->pages); |
| 88 | printf("start block: %08x\n", ubl_hdr->block); |
| 89 | printf("start page : %08x\n", ubl_hdr->page); |
| 90 | } |
| 91 | |
| 92 | static void parse_cfg_cmd(struct ubl_header *ublhdr, int32_t cmd, char *token, |
| 93 | char *name, int lineno, int fld, int dcd_len) |
| 94 | { |
| 95 | static int cmd_ver_first = ~0; |
| 96 | |
| 97 | switch (cmd) { |
| 98 | case CMD_BOOT_MODE: |
| 99 | ublhdr->magic = get_table_entry_id(ublimage_bootops, |
| 100 | "ublimage special boot mode", token); |
| 101 | if (ublhdr->magic == -1) { |
| 102 | fprintf(stderr, "Error: %s[%d] -Invalid boot mode" |
| 103 | "(%s)\n", name, lineno, token); |
| 104 | exit(EXIT_FAILURE); |
| 105 | } |
| 106 | ublhdr->magic += UBL_MAGIC_BASE; |
| 107 | if (unlikely(cmd_ver_first != 1)) |
| 108 | cmd_ver_first = 0; |
| 109 | break; |
| 110 | case CMD_ENTRY: |
| 111 | ublhdr->entry = get_cfg_value(token, name, lineno); |
| 112 | break; |
| 113 | case CMD_PAGE: |
| 114 | ublhdr->pages = get_cfg_value(token, name, lineno); |
| 115 | break; |
| 116 | case CMD_ST_BLOCK: |
| 117 | ublhdr->block = get_cfg_value(token, name, lineno); |
| 118 | break; |
| 119 | case CMD_ST_PAGE: |
| 120 | ublhdr->page = get_cfg_value(token, name, lineno); |
| 121 | break; |
| 122 | case CMD_LD_ADDR: |
| 123 | ublhdr->pll_m = get_cfg_value(token, name, lineno); |
| 124 | break; |
| 125 | } |
| 126 | } |
| 127 | |
| 128 | static void parse_cfg_fld(struct ubl_header *ublhdr, int32_t *cmd, |
| 129 | char *token, char *name, int lineno, int fld, int *dcd_len) |
| 130 | { |
| 131 | |
| 132 | switch (fld) { |
| 133 | case CFG_COMMAND: |
| 134 | *cmd = get_table_entry_id(ublimage_cmds, |
| 135 | "ublimage commands", token); |
| 136 | if (*cmd < 0) { |
| 137 | fprintf(stderr, "Error: %s[%d] - Invalid command" |
| 138 | "(%s)\n", name, lineno, token); |
| 139 | exit(EXIT_FAILURE); |
| 140 | } |
| 141 | break; |
| 142 | case CFG_REG_VALUE: |
| 143 | parse_cfg_cmd(ublhdr, *cmd, token, name, lineno, fld, *dcd_len); |
| 144 | break; |
| 145 | default: |
| 146 | break; |
| 147 | } |
| 148 | } |
| 149 | static uint32_t parse_cfg_file(struct ubl_header *ublhdr, char *name) |
| 150 | { |
| 151 | FILE *fd = NULL; |
| 152 | char *line = NULL; |
| 153 | char *token, *saveptr1, *saveptr2; |
| 154 | int lineno = 0; |
| 155 | int i; |
| 156 | char *ptr = (char *)ublhdr; |
| 157 | int fld; |
| 158 | size_t len; |
| 159 | int dcd_len = 0; |
| 160 | int32_t cmd; |
| 161 | int ublhdrlen = sizeof(struct ubl_header); |
| 162 | |
| 163 | fd = fopen(name, "r"); |
| 164 | if (fd == 0) { |
| 165 | fprintf(stderr, "Error: %s - Can't open DCD file\n", name); |
| 166 | exit(EXIT_FAILURE); |
| 167 | } |
| 168 | |
| 169 | /* Fill header with 0xff */ |
| 170 | for (i = 0; i < ublhdrlen; i++) { |
| 171 | *ptr = 0xff; |
| 172 | ptr++; |
| 173 | } |
| 174 | |
| 175 | /* |
| 176 | * Very simple parsing, line starting with # are comments |
| 177 | * and are dropped |
| 178 | */ |
| 179 | while ((getline(&line, &len, fd)) > 0) { |
| 180 | lineno++; |
| 181 | |
| 182 | token = strtok_r(line, "\r\n", &saveptr1); |
| 183 | if (token == NULL) |
| 184 | continue; |
| 185 | |
| 186 | /* Check inside the single line */ |
| 187 | for (fld = CFG_COMMAND, cmd = CMD_INVALID, |
| 188 | line = token; ; line = NULL, fld++) { |
| 189 | token = strtok_r(line, " \t", &saveptr2); |
| 190 | if (token == NULL) |
| 191 | break; |
| 192 | |
| 193 | /* Drop all text starting with '#' as comments */ |
| 194 | if (token[0] == '#') |
| 195 | break; |
| 196 | |
| 197 | parse_cfg_fld(ublhdr, &cmd, token, name, |
| 198 | lineno, fld, &dcd_len); |
| 199 | } |
| 200 | } |
| 201 | fclose(fd); |
| 202 | |
| 203 | return dcd_len; |
| 204 | } |
| 205 | |
| 206 | static int ublimage_check_image_types(uint8_t type) |
| 207 | { |
| 208 | if (type == IH_TYPE_UBLIMAGE) |
| 209 | return EXIT_SUCCESS; |
| 210 | else |
| 211 | return EXIT_FAILURE; |
| 212 | } |
| 213 | |
| 214 | static int ublimage_verify_header(unsigned char *ptr, int image_size, |
| 215 | struct mkimage_params *params) |
| 216 | { |
| 217 | return 0; |
| 218 | } |
| 219 | |
| 220 | static void ublimage_print_header(const void *ptr) |
| 221 | { |
| 222 | struct ubl_header *ubl_hdr = (struct ubl_header *) ptr; |
| 223 | |
| 224 | print_hdr(ubl_hdr); |
| 225 | } |
| 226 | |
| 227 | static void ublimage_set_header(void *ptr, struct stat *sbuf, int ifd, |
| 228 | struct mkimage_params *params) |
| 229 | { |
| 230 | struct ubl_header *ublhdr = (struct ubl_header *)ptr; |
| 231 | |
| 232 | /* Parse configuration file */ |
| 233 | parse_cfg_file(ublhdr, params->imagename); |
| 234 | } |
| 235 | |
| 236 | int ublimage_check_params(struct mkimage_params *params) |
| 237 | { |
| 238 | if (!params) |
| 239 | return CFG_INVALID; |
| 240 | if (!strlen(params->imagename)) { |
| 241 | fprintf(stderr, "Error: %s - Configuration file not" |
| 242 | "specified, it is needed for ublimage generation\n", |
| 243 | params->cmdname); |
| 244 | return CFG_INVALID; |
| 245 | } |
| 246 | /* |
| 247 | * Check parameters: |
| 248 | * XIP is not allowed and verify that incompatible |
| 249 | * parameters are not sent at the same time |
| 250 | * For example, if list is required a data image must not be provided |
| 251 | */ |
| 252 | return (params->dflag && (params->fflag || params->lflag)) || |
| 253 | (params->fflag && (params->dflag || params->lflag)) || |
| 254 | (params->lflag && (params->dflag || params->fflag)) || |
| 255 | (params->xflag) || !(strlen(params->imagename)); |
| 256 | } |
| 257 | |
| 258 | /* |
| 259 | * ublimage parameters |
| 260 | */ |
| 261 | static struct image_type_params ublimage_params = { |
| 262 | .name = "Davinci UBL boot support", |
| 263 | .header_size = sizeof(struct ubl_header), |
| 264 | .hdr = (void *)&ublimage_header, |
| 265 | .check_image_type = ublimage_check_image_types, |
| 266 | .verify_header = ublimage_verify_header, |
| 267 | .print_header = ublimage_print_header, |
| 268 | .set_header = ublimage_set_header, |
| 269 | .check_params = ublimage_check_params, |
| 270 | }; |
| 271 | |
| 272 | void init_ubl_image_type(void) |
| 273 | { |
| 274 | mkimage_register(&ublimage_params); |
| 275 | } |