Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / 5a1d96886a074a7d22a4e968364e150f59649f3c / . / dts / upstream / src / arm / qcom / qcom-msm8974pro-fairphone-fp2.dts
blob: 42d253b75dad02552e03b0c210d3589c9727a678 [file] [log] [blame]
Tom Rini53633a82024-02-29 12:33:36 -0500[diff] [blame]1// SPDX-License-Identifier: GPL-2.0
2#include "qcom-msm8974pro.dtsi"
3#include "qcom-pm8841.dtsi"
4#include "qcom-pm8941.dtsi"
5#include <dt-bindings/input/input.h>
6#include <dt-bindings/leds/common.h>
7#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
8
9/ {
10 model = "Fairphone 2";
11 compatible = "fairphone,fp2", "qcom,msm8974pro", "qcom,msm8974";
12 chassis-type = "handset";
13
14 aliases {
15 mmc0 = &sdhc_1;
16 mmc1 = &sdhc_2;
17 serial0 = &blsp1_uart2;
18 };
19
20 chosen {
21 stdout-path = "serial0:115200n8";
22 };
23
24 gpio-keys {
25 compatible = "gpio-keys";
26
27 pinctrl-names = "default";
28 pinctrl-0 = <&gpio_keys_pin_a>;
29
30 key-camera-snapshot {
31 label = "camera_snapshot";
32 gpios = <&pm8941_gpios 1 GPIO_ACTIVE_LOW>;
33 linux,code = <KEY_CAMERA>;
34 wakeup-source;
35 debounce-interval = <15>;
36 };
37
38 key-volume-down {
39 label = "volume_down";
40 gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
41 linux,code = <KEY_VOLUMEDOWN>;
42 wakeup-source;
43 debounce-interval = <15>;
44 };
45
46 key-volume-up {
47 label = "volume_up";
48 gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
49 linux,code = <KEY_VOLUMEUP>;
50 wakeup-source;
51 debounce-interval = <15>;
52 };
53 };
54
55 vibrator {
56 compatible = "gpio-vibrator";
57 enable-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>;
58 vcc-supply = <&pm8941_l18>;
59 };
60};
61
62&blsp1_i2c2 {
63 status = "okay";
64
65 touchscreen@41 {
66 compatible = "ilitek,ili2120";
67 reg = <0x41>;
68 interrupt-parent = <&tlmm>;
69 interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
70 reset-gpios = <&tlmm 55 GPIO_ACTIVE_LOW>;
71
72 touchscreen-size-x = <1080>;
73 touchscreen-size-y = <1920>;
74 };
75};
76
77&blsp1_uart2 {
78 status = "okay";
79};
80
81&imem {
82 reboot-mode {
83 mode-normal = <0x77665501>;
84 mode-bootloader = <0x77665500>;
85 mode-recovery = <0x77665502>;
86 };
87};
88
89&pm8941_gpios {
90 gpio_keys_pin_a: gpio-keys-active-state {
91 pins = "gpio1", "gpio2", "gpio5";
92 function = "normal";
93
94 bias-pull-up;
95 power-source = <PM8941_GPIO_S3>;
96 };
97};
98
99&pm8941_lpg {
100 status = "okay";
101
102 qcom,power-source = <1>;
103
104 multi-led {
105 color = <LED_COLOR_ID_RGB>;
106 function = LED_FUNCTION_STATUS;
107
108 #address-cells = <1>;
109 #size-cells = <0>;
110
111 led@7 {
112 reg = <7>;
113 color = <LED_COLOR_ID_RED>;
114 };
115
116 led@6 {
117 reg = <6>;
118 color = <LED_COLOR_ID_GREEN>;
119 };
120
121 led@5 {
122 reg = <5>;
123 color = <LED_COLOR_ID_BLUE>;
124 };
125 };
126};
127
128&pronto {
129 status = "okay";
130
131 vddmx-supply = <&pm8841_s1>;
132 vddcx-supply = <&pm8841_s2>;
133 vddpx-supply = <&pm8941_s3>;
134
135 pinctrl-names = "default";
136 pinctrl-0 = <&wcnss_pin_a>;
137
138 iris {
139 vddxo-supply = <&pm8941_l6>;
140 vddrfa-supply = <&pm8941_l11>;
141 vddpa-supply = <&pm8941_l19>;
142 vdddig-supply = <&pm8941_s3>;
143 };
144
145 smd-edge {
146 qcom,remote-pid = <4>;
147 label = "pronto";
148
149 wcnss {
150 status = "okay";
151 };
152 };
153};
154
155&remoteproc_adsp {
156 status = "okay";
157 cx-supply = <&pm8841_s2>;
158};
159
160&remoteproc_mss {
161 status = "okay";
162 cx-supply = <&pm8841_s2>;
163 mss-supply = <&pm8841_s3>;
164 mx-supply = <&pm8841_s1>;
165 pll-supply = <&pm8941_l12>;
166};
167
168&rpm_requests {
169 regulators-0 {
170 compatible = "qcom,rpm-pm8841-regulators";
171
172 pm8841_s1: s1 {
173 regulator-min-microvolt = <675000>;
174 regulator-max-microvolt = <1050000>;
175 };
176
177 pm8841_s2: s2 {
178 regulator-min-microvolt = <500000>;
179 regulator-max-microvolt = <1050000>;
180 };
181
182 pm8841_s3: s3 {
183 regulator-min-microvolt = <1050000>;
184 regulator-max-microvolt = <1050000>;
185 };
186 };
187
188 regulators-1 {
189 compatible = "qcom,rpm-pm8941-regulators";
190
191 vdd_l1_l3-supply = <&pm8941_s1>;
192 vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
193 vdd_l4_l11-supply = <&pm8941_s1>;
194 vdd_l5_l7-supply = <&pm8941_s2>;
195 vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
196 vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
197 vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
198 vdd_l21-supply = <&vreg_boost>;
199
200 pm8941_s1: s1 {
201 regulator-min-microvolt = <1300000>;
202 regulator-max-microvolt = <1300000>;
203 regulator-always-on;
204 regulator-boot-on;
205 };
206
207 pm8941_s2: s2 {
208 regulator-min-microvolt = <2150000>;
209 regulator-max-microvolt = <2150000>;
210 regulator-boot-on;
211 };
212
213 pm8941_s3: s3 {
214 regulator-min-microvolt = <1800000>;
215 regulator-max-microvolt = <1800000>;
216 regulator-always-on;
217 regulator-boot-on;
218 };
219
220 pm8941_l1: l1 {
221 regulator-min-microvolt = <1225000>;
222 regulator-max-microvolt = <1225000>;
223 regulator-always-on;
224 regulator-boot-on;
225 };
226
227 pm8941_l2: l2 {
228 regulator-min-microvolt = <1200000>;
229 regulator-max-microvolt = <1200000>;
230 };
231
232 pm8941_l3: l3 {
233 regulator-min-microvolt = <1225000>;
234 regulator-max-microvolt = <1225000>;
235 };
236
237 pm8941_l4: l4 {
238 regulator-min-microvolt = <1225000>;
239 regulator-max-microvolt = <1225000>;
240 };
241
242 pm8941_l5: l5 {
243 regulator-min-microvolt = <1800000>;
244 regulator-max-microvolt = <1800000>;
245 };
246
247 pm8941_l6: l6 {
248 regulator-min-microvolt = <1800000>;
249 regulator-max-microvolt = <1800000>;
250 regulator-boot-on;
251 };
252
253 pm8941_l7: l7 {
254 regulator-min-microvolt = <1800000>;
255 regulator-max-microvolt = <1800000>;
256 regulator-boot-on;
257 };
258
259 pm8941_l8: l8 {
260 regulator-min-microvolt = <1800000>;
261 regulator-max-microvolt = <1800000>;
262 };
263
264 pm8941_l9: l9 {
265 regulator-min-microvolt = <1800000>;
266 regulator-max-microvolt = <2950000>;
267 };
268
269 pm8941_l10: l10 {
270 regulator-min-microvolt = <1800000>;
271 regulator-max-microvolt = <2950000>;
272 };
273
274 pm8941_l11: l11 {
275 regulator-min-microvolt = <1225000>;
276 regulator-max-microvolt = <1350000>;
277 };
278
279 pm8941_l12: l12 {
280 regulator-min-microvolt = <1800000>;
281 regulator-max-microvolt = <1800000>;
282 regulator-always-on;
283 regulator-boot-on;
284 };
285
286 pm8941_l13: l13 {
287 regulator-min-microvolt = <1800000>;
288 regulator-max-microvolt = <2950000>;
289 regulator-boot-on;
290 };
291
292 pm8941_l14: l14 {
293 regulator-min-microvolt = <1800000>;
294 regulator-max-microvolt = <1800000>;
295 };
296
297 pm8941_l15: l15 {
298 regulator-min-microvolt = <2050000>;
299 regulator-max-microvolt = <2050000>;
300 };
301
302 pm8941_l16: l16 {
303 regulator-min-microvolt = <2700000>;
304 regulator-max-microvolt = <2700000>;
305 };
306
307 pm8941_l17: l17 {
308 regulator-min-microvolt = <2850000>;
309 regulator-max-microvolt = <2850000>;
310 };
311
312 pm8941_l18: l18 {
313 regulator-min-microvolt = <2850000>;
314 regulator-max-microvolt = <2850000>;
315 };
316
317 pm8941_l19: l19 {
318 regulator-min-microvolt = <2900000>;
319 regulator-max-microvolt = <3350000>;
320 };
321
322 pm8941_l20: l20 {
323 regulator-min-microvolt = <2950000>;
324 regulator-max-microvolt = <2950000>;
325 regulator-system-load = <200000>;
326 regulator-allow-set-load;
327 regulator-boot-on;
328 };
329
330 pm8941_l21: l21 {
331 regulator-min-microvolt = <2950000>;
332 regulator-max-microvolt = <2950000>;
333 regulator-boot-on;
334 };
335
336 pm8941_l22: l22 {
337 regulator-min-microvolt = <3000000>;
338 regulator-max-microvolt = <3300000>;
339 };
340
341 pm8941_l23: l23 {
342 regulator-min-microvolt = <3000000>;
343 regulator-max-microvolt = <3000000>;
344 };
345
346 pm8941_l24: l24 {
347 regulator-min-microvolt = <3075000>;
348 regulator-max-microvolt = <3075000>;
349 regulator-boot-on;
350 };
351 };
352};
353
354&sdhc_1 {
355 status = "okay";
356
357 vmmc-supply = <&pm8941_l20>;
358 vqmmc-supply = <&pm8941_s3>;
359
360 pinctrl-names = "default", "sleep";
361 pinctrl-0 = <&sdc1_on>;
362 pinctrl-1 = <&sdc1_off>;
363};
364
365&sdhc_2 {
366 status = "okay";
367
368 vmmc-supply = <&pm8941_l21>;
369 vqmmc-supply = <&pm8941_l13>;
370
371 pinctrl-names = "default", "sleep";
372 pinctrl-0 = <&sdc2_on>;
373 pinctrl-1 = <&sdc2_off>;
374};
375
376&smbb {
377 usb-charge-current-limit = <1500000>;
378 qcom,fast-charge-safe-current = <1500000>;
379 qcom,fast-charge-current-limit = <1500000>;
380 qcom,fast-charge-safe-voltage = <4380000>;
381 qcom,fast-charge-high-threshold-voltage = <4350000>;
382 qcom,auto-recharge-threshold-voltage = <4240000>;
383 qcom,minimum-input-voltage = <4450000>;
384};
385
386&tlmm {
387 sdc1_on: sdc1-on-state {
388 clk-pins {
389 pins = "sdc1_clk";
390 drive-strength = <16>;
391 bias-disable;
392 };
393
394 cmd-data-pins {
395 pins = "sdc1_cmd", "sdc1_data";
396 drive-strength = <10>;
397 bias-pull-up;
398 };
399 };
400
401 sdc2_on: sdc2-on-state {
402 clk-pins {
403 pins = "sdc2_clk";
404 drive-strength = <10>;
405 bias-disable;
406 };
407
408 cmd-data-pins {
409 pins = "sdc2_cmd", "sdc2_data";
410 drive-strength = <6>;
411 bias-pull-up;
412 };
413 };
414
415 wcnss_pin_a: wcnss-pin-active-state {
416 wlan-pins {
417 pins = "gpio36", "gpio37", "gpio38", "gpio39", "gpio40";
418 function = "wlan";
419
420 drive-strength = <6>;
421 bias-pull-down;
422 };
423
424 bt-pins {
425 pins = "gpio35", "gpio43", "gpio44";
426 function = "bt";
427
428 drive-strength = <2>;
429 bias-pull-down;
430 };
431
432 fm-pins {
433 pins = "gpio41", "gpio42";
434 function = "fm";
435
436 drive-strength = <2>;
437 bias-pull-down;
438 };
439 };
440};
441
442&usb {
443 status = "okay";
444
445 phys = <&usb_hs1_phy>;
446 phy-select = <&tcsr 0xb000 0>;
447 extcon = <&smbb>, <&usb_id>;
448 vbus-supply = <&chg_otg>;
449
450 hnp-disable;
451 srp-disable;
452 adp-disable;
453};
454
455&usb_hs1_phy {
456 status = "okay";
457
458 v1p8-supply = <&pm8941_l6>;
459 v3p3-supply = <&pm8941_l24>;
460
461 extcon = <&smbb>;
462 qcom,init-seq = /bits/ 8 <0x1 0x64>;
463};