Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0-only |
| 2 | /* |
| 3 | * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/ |
| 4 | */ |
| 5 | /dts-v1/; |
| 6 | |
| 7 | #include "omap5-board-common.dtsi" |
| 8 | |
| 9 | / { |
| 10 | model = "TI OMAP5 uEVM board"; |
| 11 | compatible = "ti,omap5-uevm", "ti,omap5"; |
| 12 | |
| 13 | memory@80000000 { |
| 14 | device_type = "memory"; |
| 15 | reg = <0 0x80000000 0 0x7f000000>; /* 2032 MB */ |
| 16 | }; |
| 17 | |
| 18 | reserved-memory { |
| 19 | #address-cells = <2>; |
| 20 | #size-cells = <2>; |
| 21 | ranges; |
| 22 | |
| 23 | dsp_memory_region: dsp-memory@95000000 { |
| 24 | compatible = "shared-dma-pool"; |
| 25 | reg = <0 0x95000000 0 0x800000>; |
| 26 | reusable; |
| 27 | status = "okay"; |
| 28 | }; |
| 29 | |
| 30 | ipu_memory_region: ipu-memory@95800000 { |
| 31 | compatible = "shared-dma-pool"; |
| 32 | reg = <0 0x95800000 0 0x3800000>; |
| 33 | reusable; |
| 34 | status = "okay"; |
| 35 | }; |
| 36 | }; |
| 37 | |
| 38 | aliases { |
| 39 | ethernet = ðernet; |
| 40 | }; |
| 41 | |
| 42 | leds { |
| 43 | compatible = "gpio-leds"; |
| 44 | led1 { |
| 45 | label = "omap5:blue:usr1"; |
| 46 | gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>; /* gpio5_153 D1 LED */ |
| 47 | linux,default-trigger = "heartbeat"; |
| 48 | default-state = "off"; |
| 49 | }; |
| 50 | }; |
| 51 | |
| 52 | evm_keys { |
| 53 | compatible = "gpio-keys"; |
| 54 | |
| 55 | pinctrl-names = "default"; |
| 56 | pinctrl-0 = <&evm_keys_pins>; |
| 57 | |
| 58 | #address-cells = <7>; |
| 59 | #size-cells = <0>; |
| 60 | |
| 61 | btn1 { |
| 62 | label = "BTN1"; |
| 63 | linux,code = <169>; |
| 64 | gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; /* gpio3_83 */ |
| 65 | wakeup-source; |
| 66 | autorepeat; |
| 67 | debounce-interval = <50>; |
| 68 | }; |
| 69 | }; |
| 70 | |
| 71 | evm_leds { |
| 72 | compatible = "gpio-leds"; |
| 73 | |
| 74 | led1 { |
| 75 | label = "omap5:red:led"; |
| 76 | gpios = <&gpio9 17 GPIO_ACTIVE_HIGH>; |
| 77 | linux,default-trigger = "mmc0"; |
| 78 | default-state = "off"; |
| 79 | }; |
| 80 | |
| 81 | led2 { |
| 82 | label = "omap5:green:led"; |
| 83 | gpios = <&gpio9 18 GPIO_ACTIVE_HIGH>; |
| 84 | linux,default-trigger = "mmc1"; |
| 85 | default-state = "off"; |
| 86 | }; |
| 87 | |
| 88 | led3 { |
| 89 | label = "omap5:blue:led"; |
| 90 | gpios = <&gpio9 19 GPIO_ACTIVE_HIGH>; |
| 91 | linux,default-trigger = "mmc2"; |
| 92 | default-state = "off"; |
| 93 | }; |
| 94 | |
| 95 | led4 { |
| 96 | label = "omap5:green:led1"; |
| 97 | gpios = <&gpio9 2 GPIO_ACTIVE_HIGH>; |
| 98 | linux,default-trigger = "heartbeat"; |
| 99 | default-state = "off"; |
| 100 | }; |
| 101 | |
| 102 | led5 { |
| 103 | label = "omap5:green:led2"; |
| 104 | gpios = <&gpio9 3 GPIO_ACTIVE_HIGH>; |
| 105 | linux,default-trigger = "default-on"; |
| 106 | default-state = "off"; |
| 107 | }; |
| 108 | |
| 109 | led6 { |
| 110 | label = "omap5:green:led3"; |
| 111 | gpios = <&gpio9 4 GPIO_ACTIVE_HIGH>; |
| 112 | linux,default-trigger = "heartbeat"; |
| 113 | default-state = "off"; |
| 114 | }; |
| 115 | |
| 116 | led7 { |
| 117 | label = "omap5:green:led4"; |
| 118 | gpios = <&gpio9 5 GPIO_ACTIVE_HIGH>; |
| 119 | linux,default-trigger = "default-on"; |
| 120 | default-state = "off"; |
| 121 | }; |
| 122 | |
| 123 | led8 { |
| 124 | label = "omap5:green:led5"; |
| 125 | gpios = <&gpio9 6 GPIO_ACTIVE_HIGH>; |
| 126 | linux,default-trigger = "heartbeat"; |
| 127 | default-state = "off"; |
| 128 | }; |
| 129 | }; |
| 130 | }; |
| 131 | |
| 132 | &hdmi { |
| 133 | vdda-supply = <&ldo4_reg>; |
| 134 | }; |
| 135 | |
| 136 | &i2c1 { |
| 137 | eeprom@50 { |
| 138 | compatible = "atmel,24c02"; |
| 139 | reg = <0x50>; |
| 140 | }; |
| 141 | }; |
| 142 | |
| 143 | &i2c5 { |
| 144 | pinctrl-names = "default"; |
| 145 | pinctrl-0 = <&i2c5_pins>; |
| 146 | |
| 147 | clock-frequency = <400000>; |
| 148 | |
| 149 | gpio9: gpio@22 { |
| 150 | compatible = "ti,tca6424"; |
| 151 | reg = <0x22>; |
| 152 | gpio-controller; |
| 153 | #gpio-cells = <2>; |
| 154 | }; |
| 155 | }; |
| 156 | |
| 157 | &mmc1 { |
| 158 | pinctrl-names = "default"; |
| 159 | pinctrl-0 = <&mmc1_pins>; |
| 160 | |
| 161 | cd-gpios = <&gpio5 24 GPIO_ACTIVE_LOW>; /* gpio5_152 */ |
| 162 | }; |
| 163 | |
| 164 | &omap5_pmx_core { |
| 165 | evm_keys_pins: evm-keys-gpio-pins { |
| 166 | pinctrl-single,pins = < |
| 167 | OMAP5_IOPAD(0x0b6, PIN_INPUT | MUX_MODE6) /* gpio3_83 */ |
| 168 | >; |
| 169 | }; |
| 170 | |
| 171 | i2c5_pins: i2c5-pins { |
| 172 | pinctrl-single,pins = < |
| 173 | OMAP5_IOPAD(0x1c6, PIN_INPUT | MUX_MODE0) /* i2c5_scl */ |
| 174 | OMAP5_IOPAD(0x1c8, PIN_INPUT | MUX_MODE0) /* i2c5_sda */ |
| 175 | >; |
| 176 | }; |
| 177 | |
| 178 | mmc1_pins: mmc1-pins { |
| 179 | pinctrl-single,pins = < |
| 180 | OMAP5_IOPAD(0x1d4, PIN_INPUT_PULLUP | MUX_MODE6) /* gpio5_152 */ |
| 181 | >; |
| 182 | }; |
| 183 | }; |
| 184 | |
| 185 | &tpd12s015 { |
| 186 | gpios = <&gpio9 0 GPIO_ACTIVE_HIGH>, /* TCA6424A P01, CT CP HPD */ |
| 187 | <&gpio9 1 GPIO_ACTIVE_HIGH>, /* TCA6424A P00, LS OE */ |
| 188 | <&gpio7 1 GPIO_ACTIVE_HIGH>; /* GPIO 193, HPD */ |
| 189 | }; |
| 190 | |
| 191 | &twl6040 { |
| 192 | ti,audpwron-gpio = <&gpio5 13 GPIO_ACTIVE_HIGH>; /* gpio line 141 */ |
| 193 | }; |
| 194 | |
| 195 | &twl6040_pins { |
| 196 | pinctrl-single,pins = < |
| 197 | OMAP5_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE6) /* mcspi1_somi.gpio5_141 */ |
| 198 | >; |
| 199 | }; |
| 200 | |
| 201 | &usbhsehci { |
| 202 | #address-cells = <1>; |
| 203 | #size-cells = <0>; |
| 204 | |
| 205 | hub@2 { |
| 206 | compatible = "usb424,3503"; |
| 207 | reg = <2>; |
| 208 | #address-cells = <1>; |
| 209 | #size-cells = <0>; |
| 210 | }; |
| 211 | |
| 212 | ethernet: ethernet@3 { |
| 213 | compatible = "usb424,9730"; |
| 214 | reg = <3>; |
| 215 | }; |
| 216 | }; |
| 217 | |
| 218 | &wlcore { |
| 219 | compatible = "ti,wl1837"; |
| 220 | }; |
| 221 | |
| 222 | &dsp { |
| 223 | status = "okay"; |
| 224 | memory-region = <&dsp_memory_region>; |
| 225 | ti,timers = <&timer5>; |
| 226 | ti,watchdog-timers = <&timer6>; |
| 227 | }; |
| 228 | |
| 229 | &ipu { |
| 230 | status = "okay"; |
| 231 | memory-region = <&ipu_memory_region>; |
| 232 | ti,timers = <&timer3>; |
| 233 | ti,watchdog-timers = <&timer9>, <&timer11>; |
| 234 | }; |