blob: 25f558d24c789c0dbf119db88dff156ab4fdbb85 [file] [log] [blame]
Nathan Rossice1771e2015-11-17 22:56:56 +10001/*
2 * Copyright (C) 2015 Nathan Rossi <nathan@nathanrossi.com>
3 *
4 * SPDX-License-Identifier: GPL-2.0+
5 *
6 * The following Boot Header format/structures and values are defined in the
7 * following documents:
8 * * Xilinx Zynq-7000 Technical Reference Manual (Section 6.3)
9 * * Xilinx Zynq-7000 Software Developers Guide (Appendix A.7 and A.8)
10 *
11 * Expected Header Size = 0x8C0
12 * Forced as 'little' endian, 32-bit words
13 *
14 * 0x 0 - Interrupt Table (8 words)
15 * ... (Default value = 0xeafffffe)
16 * 0x 1f
17 * 0x 20 - Width Detection
18 * * DEFAULT_WIDTHDETECTION 0xaa995566
19 * 0x 24 - Image Identifier
20 * * DEFAULT_IMAGEIDENTIFIER 0x584c4e58
21 * 0x 28 - Encryption
22 * * 0x00000000 - None
23 * * 0xa5c3c5a3 - eFuse
24 * * 0x3a5c3c5a - bbRam
25 * 0x 2C - User Field
26 * 0x 30 - Image Offset
27 * 0x 34 - Image Size
28 * 0x 38 - Reserved (0x00000000) (according to spec)
29 * * FSBL defines this field for Image Destination Address.
30 * 0x 3C - Image Load
31 * 0x 40 - Image Stored Size
32 * 0x 44 - Reserved (0x00000000) (according to spec)
33 * * FSBL defines this field for QSPI configuration Data.
34 * 0x 48 - Checksum
35 * 0x 4c - Unused (21 words)
36 * ...
37 * 0x 9c
38 * 0x a0 - Register Initialization, 256 Address and Data word pairs
39 * * List is terminated with an address of 0xffffffff or
40 * ... * at the max number of entries
41 * 0x89c
42 * 0x8a0 - Unused (8 words)
43 * ...
44 * 0x8bf
45 * 0x8c0 - Data/Image starts here or above
46 */
47
48#include "imagetool.h"
49#include "mkimage.h"
50#include <image.h>
51
52#define HEADER_INTERRUPT_DEFAULT (cpu_to_le32(0xeafffffe))
53#define HEADER_REGINIT_NULL (cpu_to_le32(0xffffffff))
54#define HEADER_WIDTHDETECTION (cpu_to_le32(0xaa995566))
55#define HEADER_IMAGEIDENTIFIER (cpu_to_le32(0x584c4e58))
56
57enum {
58 ENCRYPTION_EFUSE = 0xa5c3c5a3,
59 ENCRYPTION_BBRAM = 0x3a5c3c5a,
60 ENCRYPTION_NONE = 0x0,
61};
62
63struct zynq_reginit {
64 uint32_t address;
65 uint32_t data;
66};
67
68#define HEADER_INTERRUPT_VECTORS 8
69#define HEADER_REGINITS 256
70
71struct zynq_header {
72 uint32_t interrupt_vectors[HEADER_INTERRUPT_VECTORS]; /* 0x0 */
73 uint32_t width_detection; /* 0x20 */
74 uint32_t image_identifier; /* 0x24 */
75 uint32_t encryption; /* 0x28 */
76 uint32_t user_field; /* 0x2c */
77 uint32_t image_offset; /* 0x30 */
78 uint32_t image_size; /* 0x34 */
79 uint32_t __reserved1; /* 0x38 */
80 uint32_t image_load; /* 0x3c */
81 uint32_t image_stored_size; /* 0x40 */
82 uint32_t __reserved2; /* 0x44 */
83 uint32_t checksum; /* 0x48 */
84 uint32_t __reserved3[21]; /* 0x4c */
85 struct zynq_reginit register_init[HEADER_REGINITS]; /* 0xa0 */
86 uint32_t __reserved4[8]; /* 0x8a0 */
87};
88
89static struct zynq_header zynqimage_header;
90
91static uint32_t zynqimage_checksum(struct zynq_header *ptr)
92{
93 uint32_t checksum = 0;
94
95 if (ptr == NULL)
96 return 0;
97
98 checksum += le32_to_cpu(ptr->width_detection);
99 checksum += le32_to_cpu(ptr->image_identifier);
100 checksum += le32_to_cpu(ptr->encryption);
101 checksum += le32_to_cpu(ptr->user_field);
102 checksum += le32_to_cpu(ptr->image_offset);
103 checksum += le32_to_cpu(ptr->image_size);
104 checksum += le32_to_cpu(ptr->__reserved1);
105 checksum += le32_to_cpu(ptr->image_load);
106 checksum += le32_to_cpu(ptr->image_stored_size);
107 checksum += le32_to_cpu(ptr->__reserved2);
108 checksum = ~checksum;
109
110 return cpu_to_le32(checksum);
111}
112
113static void zynqimage_default_header(struct zynq_header *ptr)
114{
115 int i;
116
117 if (ptr == NULL)
118 return;
119
120 ptr->width_detection = HEADER_WIDTHDETECTION;
121 ptr->image_identifier = HEADER_IMAGEIDENTIFIER;
122 ptr->encryption = cpu_to_le32(ENCRYPTION_NONE);
123
124 /* Setup not-supported/constant/reserved fields */
125 for (i = 0; i < HEADER_INTERRUPT_VECTORS; i++)
126 ptr->interrupt_vectors[i] = HEADER_INTERRUPT_DEFAULT;
127
128 for (i = 0; i < HEADER_REGINITS; i++) {
129 ptr->register_init[i].address = HEADER_REGINIT_NULL;
130 ptr->register_init[i].data = HEADER_REGINIT_NULL;
131 }
132
133 /*
134 * Certain reserved fields are required to be set to 0, ensure they are
135 * set as such.
136 */
137 ptr->__reserved1 = 0x0;
138 ptr->__reserved2 = 0x0;
139}
140
141/* mkimage glue functions */
142static int zynqimage_verify_header(unsigned char *ptr, int image_size,
143 struct image_tool_params *params)
144{
145 struct zynq_header *zynqhdr = (struct zynq_header *)ptr;
146
147 if (image_size < sizeof(struct zynq_header))
148 return -1;
149
150 if (zynqhdr->width_detection != HEADER_WIDTHDETECTION)
151 return -1;
152 if (zynqhdr->image_identifier != HEADER_IMAGEIDENTIFIER)
153 return -1;
154
155 if (zynqimage_checksum(zynqhdr) != zynqhdr->checksum)
156 return -1;
157
158 return 0;
159}
160
161static void zynqimage_print_header(const void *ptr)
162{
163 struct zynq_header *zynqhdr = (struct zynq_header *)ptr;
164 int i;
165
166 printf("Image Type : Xilinx Zynq Boot Image support\n");
167 printf("Image Offset : 0x%08x\n", le32_to_cpu(zynqhdr->image_offset));
168 printf("Image Size : %lu bytes (%lu bytes packed)\n",
169 (unsigned long)le32_to_cpu(zynqhdr->image_size),
170 (unsigned long)le32_to_cpu(zynqhdr->image_stored_size));
171 printf("Image Load : 0x%08x\n", le32_to_cpu(zynqhdr->image_load));
172 printf("User Field : 0x%08x\n", le32_to_cpu(zynqhdr->user_field));
173 printf("Checksum : 0x%08x\n", le32_to_cpu(zynqhdr->checksum));
174
175 for (i = 0; i < HEADER_INTERRUPT_VECTORS; i++) {
176 if (zynqhdr->interrupt_vectors[i] == HEADER_INTERRUPT_DEFAULT)
177 continue;
178
179 printf("Modified Interrupt Vector Address [%d]: 0x%08x\n", i,
180 le32_to_cpu(zynqhdr->interrupt_vectors[i]));
181 }
182
183 for (i = 0; i < HEADER_REGINITS; i++) {
184 if (zynqhdr->register_init[i].address == HEADER_REGINIT_NULL)
185 break;
186
187 if (i == 0)
188 printf("Custom Register Initialization:\n");
189
190 printf(" @ 0x%08x -> 0x%08x\n",
191 le32_to_cpu(zynqhdr->register_init[i].address),
192 le32_to_cpu(zynqhdr->register_init[i].data));
193 }
194}
195
196static int zynqimage_check_params(struct image_tool_params *params)
197{
198 if (!params)
199 return 0;
200
201 if (params->addr != 0x0) {
202 fprintf(stderr, "Error: Load Address cannot be specified.\n");
203 return -1;
204 }
205
206 /*
207 * If the entry point is specified ensure it is 64 byte aligned.
208 */
209 if (params->eflag && (params->ep % 64 != 0)) {
210 fprintf(stderr,
211 "Error: Entry Point must be aligned to a 64-byte boundary.\n");
212 return -1;
213 }
214
215 return !((params->lflag || params->dflag) ||
216 (params->dflag && params->eflag));
217}
218
219static int zynqimage_check_image_types(uint8_t type)
220{
221 if (type == IH_TYPE_ZYNQIMAGE)
222 return EXIT_SUCCESS;
223 return EXIT_FAILURE;
224}
225
226static void zynqimage_set_header(void *ptr, struct stat *sbuf, int ifd,
227 struct image_tool_params *params)
228{
229 struct zynq_header *zynqhdr = (struct zynq_header *)ptr;
230 zynqimage_default_header(zynqhdr);
231
232 /* place image directly after header */
233 zynqhdr->image_offset =
234 cpu_to_le32((uint32_t)sizeof(struct zynq_header));
235 zynqhdr->image_size = cpu_to_le32((uint32_t)sbuf->st_size);
236 zynqhdr->image_stored_size = zynqhdr->image_size;
237 zynqhdr->image_load = 0x0;
238 if (params->eflag)
239 zynqhdr->image_load = cpu_to_le32((uint32_t)params->ep);
240
241 zynqhdr->checksum = zynqimage_checksum(zynqhdr);
242}
243
244U_BOOT_IMAGE_TYPE(
245 zynqimage,
246 "Xilinx Zynq Boot Image support",
247 sizeof(struct zynq_header),
248 (void *)&zynqimage_header,
249 zynqimage_check_params,
250 zynqimage_verify_header,
251 zynqimage_print_header,
252 zynqimage_set_header,
253 NULL,
254 zynqimage_check_image_types,
255 NULL,
256 NULL
257);